Spline Shaft Grinding Machine

WERNER, FRITZ FKR 16

Year of construction: 1973, Condition: good (used), 1 used spline shaft grinding machine make Fritz Werner type FKR 16 year 73 No. 5275/8012 technical data center height 185 mm max.grinding length1600 mm passage diameter 55 mm pitches 4-32 Fzeposg L 5900 x W 2300 x H 2000 mm weight 7 to

Overall weight: 18,100 kg, empty load weight: 2,100 kg, maximum load weight: 16,000 kg, axe configuration: 2 axles, next inspection (TÜV): 01/2025, wheelbase: 3,000 mm, color: orange, Year of construction: 2024, Condition: as good as new (ex-display), Functionality: fully functional, machine/vehicle number: 0560, Equipment: center pivot plate, The TPW 16 VL - LK has a payload of 16000 kg on the loading area at 6 km/h. The dimensions are 4000 mm long, 2000 mm wide and approx. 640 mm high. Turntable steering on the front axle, rigid trailing axle. Drawbar with safety catch, forged drawbar eye with 40 mm hole Heavy-duty tires 425 x 150-305 Twin wheel on steel rims with double-sided conical bearing sealed with Nilos ring. Safety; four weld-on brackets are welded to the long sides (see load securing) and a double-acting wheel chock is fitted to the frame. The paint finish is yellow orange RAL 2000. Transport floor with 30 mm tongue and groove boards, recessed bolted. Bj7Rj3Daef8

Year of construction: 2024, Condition: new, Heavy duty industrial trailer with payload 16000 Kg at 6 Km/h dimensions 5000 x 2000 x 540 mm drawbar according to DIN 40 mm drawbar eye Qsj0Uaxo All wheel steering drums 425 x 150 - 305 twin on steel rims with conical bearing on both sides transport floor spruce 30 mm four welding eyes on each long side for securing the load

Year of construction: 2023, Condition: good (used), Transport trailer for loads up to 16 tons distributed on 60% of the loading area. The transport trailer is 5000 mm long 2000 mm wide and about 750 mm high has a 30 mm solid wood spruce transport floor which is recessed screwed. The steering is a turntable steering on the front axle and has a rigid trailing axle. 4 stop blocks per long side for load securing. Drawbar 1150 mm long with drop protection, painted in RAL 2000. Cigzexndcx The towing eye on the drawbar is according to DIN with a 40 mm towing eye. Tires are bandages 425 x 150 twin tires

Year of construction: 2024, Condition: new, Transport trailer with payload of 16 tons for industrial use Jdl2Brav Length 6000 mm Width 2000 mm tires bandages 425x150 twin wheel Loading area with solid wood 30 mm Douglas fir Drawbar with fall protection and drawbar eye 40 mm #In-plant transport systems #Heavy-duty trailers 6-100 tons #Heavy-duty trailers from 3 tons to 100 tons #Heavy-duty transport platform trailers #Heavy-duty platform trailers #All-wheel steering #Transport trolleys Paintwork RAL 2000

Condition: ready for operation (used), jaw width: 200 mm jaw height: 60 mm span width: 115 mm total height: 130 mm Nkzyp

Year of construction: 1971, Condition: not inspected (used), FRITZ WERNER HF 1.6 table 1650x310 mm clamping surface 1000x310 mm Cjjmyk2G2I year of manufacture 1971 Dimensions 1850x1650x2250 mm LxWxH Weight 1800 kg

Condition: good (used), Manufacturer Fritz Werner, type SH1D, with clamping table, width approx. 1000mm x 200mm, serial number/year of manufacture not readable, including 1 tool cabinet with contents such as various accessories such as consumables etc C0Jyqz7Igu

Condition: used, x-travel ca. 900 mm y-travel ca. 280 mm z-travel ca. 400 mm total power requirement 5 kW Ukv9Jp00Sj weight of the machine ca. 3 t dimensions of the machine ca. 2,5*2,5*2,5 m No. 5100: 1 used vertical milling machine FRITZ WERNER, type FV 2

Condition: excellent (used), Grinding length: 1600 mm Center Height: 300 mm Sz9F7 Workpiece max diameter: 600 mm Table length: 2500 mm Table width: 180 mm

Condition: good (used), Tailstock make Fritz Werner Beg2Dfap0H Tip height adjustable maximum tip height 150 mm minimum tip height 130 mm Foot width 180 mm Base depth 115 mm Width of the Paß stone 14 mm Weight 10 kg Shipping dimensions: L. 210 x B. 120 x H. 140 mm

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment -Height: adjustable Yrln8C -Recording: top -Dimensions: 245/280/H200 mm -Weight: 28 kg

Condition: used, Universal milling angle head, milling angle head Qlgapnza3 -Take: SK 50 -Flange holder outside diameter: 380 mm -Mounting hole circle: 320 mm -Admission drive diameter: 60 mm -swiveling -Quill stroke: 65 mm -Dimensions: 450/400/H700 mm -Weight: 170 kg

Condition: used, Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 0.5 kW -Speed: 3200/5200 rpm -grinding wheels: max. Ø 180 mm -Operating voltage: 380 volts -Dimensions: 500/500/H1550 mm Ccqncop -Weight: 170 kg

Condition: used, WP HKL1600 bowl lift for WP UC bowls lifting height approx. 160cm Cyyv9Ddb pictures BEFORE reconditioning

Mileage: 235,000 km, Year of construction: 2018, Condition: used, Serial number: WDB9640201025xxxx Please contact ATS Norway AS for more information Dqrn2H Please provide reference number upon request: 18660 Spesifikasjoner: - EU-godkjent frem til 12.09.2025 - 2018-modell - Km: ca. 235 000 - Gir: automat - Fjæring: stål foran og luft bak. - Dekk (se bilder) - HMF kran fra 2020 - 32 t/m kran - 8 utskyt - Støttelabber - Ryggekamera - Euro 6 - Lengde: 1 111 cm - Bredde: 255 cm - Akselavstand: 480/135 cm - Egenvekt: 16 800 kg - 6x2 - 510 hk - Hengerfeste - Verktøyskap - Tusenmetringer - Rotorbjelke - Kompressorhorn - Skade på trinn på passasjerside. - Radio/cd - Klima/ac - Servicehistorikk Beskrivelse: 2018 Mercedes Arocs 6x2 kranbil med HMF kran fra 2020. Det er 32 t/m kran med 8 utskyt. Både bil og kran er godkjent. Kan vise til servicehistorikk og leveres innen kort tid. Km: 235000 HK: 510 Technical approved: Yes EU-approved until: 12.09.2025 Own weight: 16800 Total Weight: 28000 Payload: 11125 Width: 255 Length: 1111 Euro: 6 Gearbox: Automatic

Condition: refurbished (used), Functionality: fully functional, Factory overhauled fan motor WP rack oven Circulation motor for Unitherm all models in stock! For every bakery with this bakery technology! Wtoeolb09 immediately available! with warranty

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, Telescopic crane KTH 5000 Kg with load center 600 mm telescopic length on hook 3600 mm with 950 Kg load capacity Load capacity of the load centers see load diagram one swivel hook with 5000 Kg payload with straight shackle one swivel hook with 3000 Kg with straight shackle Chs2Lzuksw Height adjustable by raster Galvanized bolts secured with rope Entry pockets for forks up to 180 x 80 mm Safety chain against slipping of the crane

Condition: new, input voltage: 380 V, input frequency: 50 Hz, Technical data see photos Co9Eh20Aq3

Year of construction: 1976, Condition: used, machine/vehicle number: 40 127 76, span the range of around: mit Spannfutter 115/48 (not available) 3 - 42 mm this maximum clamping: 345 mm span the range of around: mit Spannfutter 115/56 (not available) 5 - 50 mm this maximum clamping: 95 mm cutterhead speed: (RM 4) 740 - 1700/(ME 4) 580 - 1160 Upm spindle drive: 3 kW hydraulic drive: 4 kW space: Maschine 2100 x 1380 x 1880 mm weight: ca. 2000 kg Cyvhdm

Condition: new, Functionality: fully functional, Spare parts for Fritz Heckert milling machines F315, F400 - even for the oldest ones. 73Wcseoem We offer a full range of spare parts for milling machines – the old and new German WMW HECKERT milling machines F315, F400, FSS-350MR, FSS-400MR, FU-350MR, FU-450MR, FU-350ApUG, FU-450ApUG, FU-350MRApUG, FU-450MRApUG. In our stock one can find: milling machine head and all gears for it, dividing heads, lunette/rests, all electromagnetic clutches and brakes, shafts, bevel gears, worms and worm gears, pulleys, levers, longitudinal and cross screws, nuts, oil pumps, cooling pumps, spindles, quills, hydraulic dividers/distributors etc. All the original parts for Heckert milling machines we can offer directly from stock, ready for immediate shipment. All parts are new, executed in German quality, and meet the highest technical standards.

Overall weight: 22,200 kg, empty load weight: 2,200 kg, maximum load weight: 20,000 kg, operation weight: 22,200 kg, axe configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,200 mm, first registration: 01/2025, next inspection (TÜV): 01/2026, tire size: 23x10-12 SE, color: orange, Year of construction: 2025, Condition: new, Functionality: fully functional, machine/vehicle number: 0640, TPW 206 AL - AS SE payload 16000 kg on the loading area at 6 km/h. Dimensions: 5000 mm long, 2200 mm wide and 680 mm high. Transport floor made of spruce wood 40 mm tongue and groove Nqb2Ke93R9 Super elastic tires with profile 23x10-12 with steel rims, conical bearings on both sides, sealed with Nilos ring Drawbar with fall protection and height adjustment, towing eye 40 mm. Steering: all-wheel steering knuckle. Safety: weld-on supports, five per long side (see load securing and double-acting wheel chock mounted on the frame) Paint: yellow orange RAL 2000

Condition: used, machine/vehicle number: B.739, Outer Ø: 400 mm Bore: 95 mm Flange width: 100 mm Short taper size 6 Iv8X7Alp0 Weight approx.: 52 kg

Year of construction: 2024, Condition: new, Platform transport trolley Payload 10000 kg Length of loading area 8000 mm Width of loading area 2000 mm Loading area height 540 mm Transport floor 30 mm tongue and groove spruce recessed bolted Lashing eyes 5 on each long side Paintwork RAL 2000 Drawbar with height adjustment and drop guard Double-acting wheel chock Superelastic 18x7-8 tires with steel rims and conical bearings or 425 x 150 tyres All-wheel steering 0Vyxmsq Adjustable track and steering rods with joint eyes

Year of construction: 2024, Condition: new, Heavy-duty transport trailer for internal transportation Dimensions 4000 x 2000 x 510 mm All-wheel steering No Making Vulkollan tires 350x110x305 Wooden transport floor 40 mm recessed Bolted Painted in RAL 5010 or RAL 2000 B9Tzwn72 Drawbar with drawbar eye 40 mm and with safety catch and height adjustment. 4 lifting brackets per long side see load securing Optionally with second drawbar head at the rear so that the drawbar can be moved from the front to the rear