Punching machine

WANZKE SP 30

Condition: used, Year of construction: 1990, Technical details: Pressure: 63 t distance between columns: 200 mm stroke: 150 mm dayligth: 430 mm no. of strokes: 400 Hub/min T-slots H 12 650: 18 mm hole in table: 420x160 b x l mm ram surface area: 650 x 450 mm control: Wanske Tronicpress CNC passage of columns: 550x540 mm tank: 200 l stroke of ram - fixed: 100 mm ram diameter: 40 mm table height over floor: 1000 mm table: 600x450 mm table height over floor with metal base stand: 880 mm total power requirement: 30 kW weight of the machine ca.: 3,9 t Hydraulic automatic punching press for precision work (high-speed press) - for punching, drawing, pressing, minting, bending, riveting, straightening, assembling - with hydraulic gripper feed type HS 150 and 7-roller straightener (moving) - Normal strips of approx. 0.4mm - 2.5mm thickness x approx. 160mm width, as well as narrow strips up to approx. 4mm can be processed. Feed length can be adjusted as required via the control unit. - with ram round column guide - with automatic central lubrication - High-speed: up to 400 strokes min-1 - motorized adjustable fixed stop (bottom can be adjusted by hand/motorized) - Operating modes such as continuous stroke and/or single stroke Cpovhp2N Equipment: - 1x hydraulic unit - 2x control cabinets *

Year of construction: 1985, Condition: like new (used), Wanzke hydraulic high speed press SP/F12 double column press. -WKG 499- Offered here is a hydraulic high-speed press from the company Wanzke. This press is in mint condition! There are 2 presses on one stand. Technical data: Manufacturer: Wanzke Type: SP/F 12 Pressing force: 120 KN Retracting force: 17,8 overrun time: 0,028 sec year of construction: 1985 Main drive: 1,5kW / 1,5kW Mains voltage: 380V 50Hz Control voltage: 220V 50Hz Overtravel: 2,8mm safety distance: 4mm Pwngl Strokes/min: Working stroke: 10mm/sec. rapid traverse: 20mm/sec Max.stroke: 100mm Table area: 320 x 300 x 280mm Accessories: Double decoiler type GMD1 Digital function control "Tronic press" with full upgradeability to CNC control. There are 2 pieces in total!

Year of construction: 1985, Condition: like new (used), Wanzke hydraulic high speed press SP/F12 -WKG 499- Offered here is a hydraulic high-speed press from the company Wanzke. This press is in mint condition! Technical data: Manufacturer: Wanzke Pwnih Type: SP/F 12 pressing force: 120 KN retraction force: 17,8 overrun time: 0,028 sec year of construction: 1985 Main drive: 1,5kW / 1,5kW Mains voltage: 380V 50Hz Control voltage: 220V 50Hz Overtravel: 2,8mm safety distance: 4mm Accessories: decoiler GM1

Condition: new, Year of construction: 2025, Functionality: fully functional, warranty duration: 24 months, DGUV certified until: 03/2027, Dough kneading machine Model: SP 30 Protective cover with shutdown Bokrjf38 Kneading machine for max. 15 kg of flour Spiral mixer for max. 30 kg. Dough 2 speeds with timer DGUV V3 tested Mobile machine with 2 locking feet Connection 400V, 2.2 kW, 16A-CEE plug Weight 100 kg Dimensions: 430 x 710 x 780 mm, WxDxH Dough machine NEW with 12 months warranty Come to our large bakery machine park!

Condition: used, mileage: 431,000 km, power: 265 kW (360.30 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: mechanical, loading space width: 2,450 mm, loading space length: 6,600 mm, loading space height: 600 mm, Year of construction: 2009, first registration: 10/2009, Equipment: ABS, air conditioning, crane, parking heater, MAN TGS 26.360 / 6x4 PLATFORM 6,60 m + CRANE + REMOTE CONTROL Imported / Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2009 ? MILAGE: 431 000 km EQUIPMENT: ? ABS ? ASR ? POWER STEERING ? EL WINDOWS ? EL MIRRORS ? ENGINE BRAKE ? TACHOGRAPH PLATFORM: 660 x 245 x 60 cm (L x W x H) CAPACITY: 10 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 515/135 cm TIRE SIZE: 315/80R22,5 SUSPENSION: FRONT: SPRING BACK: AIR Cxtd9Gsw8K CRANE: PM 30 SP + REMOTE CONTROL TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr)

Condition: used, Kemper SP30 L spiral mixer 45 kg dough Cmvieek9 mobile with permanently installed bowl capacity in flour 30kg bowl contents 80 liter

Condition: excellent (used), Year of construction: 1997, Clamping machine Italpresse model SP 30-8 year 1997 S/N 978612997 working lenght approx. 3000mm B8Yf9Wi7Do working width 600mm working height min-max 450 - 1250mm 12 pcs supports 8 pcs pneumatic pressure cylinder Dimensions L x W x H = 3,5m x 0,8m x 2,24 m 1150 Kg technical information under subject of correction

Condition: new, Year of construction: 2024, Powder coating oven Working dimensions (mm): 1500 (w) x 3000 (d) x 1800 (h) Technical data: • Power consumption: 46 kW. •Temperature max 230C Equipment: • Top transport • Control panel with adjustable time and temperature • True Fan Cooking (Equal temperature throughout the furnace), • Locks for safe opening and closing. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us. Buq07Xzok9

Year of construction: 2024, Condition: new, Bin capacity: 40 [kg]. Capacity: Up to 140 [bulbs/min]. Raw material size: 45 - 140 [mm]. Overall width of device: 1050 [mm]. Total height of the machine: 1880 [mm]. Total length of machine: 4830 [mm]. Number of operating paths: 2 loading height of onion: 1000 [mm] Height of onion pick-up: 700 [mm] Height of waste collection: 400 [mm]. Power supply: 3 x 400 [V] / 50 [Hz] Installed power: 1,2 [kW]. Compressed air connection: 8-10 [bar]. Air consumption: 1,9 [m3/min]. Noise level: Over 80 [dB]. Construction materials: Stainless steel and plastics approved for contact with food Ptyl0A CE certificate: yes Cutter: no

Condition: good (used), Abrasive bodies, ceramic grinding bodies, polishing bodies for round vibrators, vibratory grinding systems, vibratory grinding round vibrators, trowal systems, continuous vibrators, ceramic grinding bodies -Manufacturer: Walther Trowal, ceramic grinding wheel type C 15 x 30 ZS Ultra-Chips -Grain: see photos -Price/tax: complete -Transport dimensions: 900/200/H500 mm -Total weight: 76 kg Csiabxq2

Condition: excellent (used), Year of construction: 2005, Item: AH-8334-Homogenizer Line Process line with SPX homogenizer Homogenizer Type 15-30-56X from 2005 Cream cheese Homogenizer Boa3Ar9Pk3 Capacity 1188 l/h, Pressure: 300 bar 15 kW, 975 rpm Feed pump, Balance tank Booster pump, Control unit! Complete mounted to Stainless Steel frame. Like new one, condition, Not used last two years!.

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, power: 30 kW (40.79 HP), Top offer: CHP Spanner wood power plant 30 kW - efficient We are selling our barely used and well-maintained Spanner wood power plant type 30-5.7-V1.1 - CHP wood chip wood gas plant - the perfect solution for sustainable energy generation from wood! This high-quality system was delivered in April 2015, offers an electrical output of 30 kW and a thermal output of approx. 70 KW, it enables cost-efficient self-generation of electricity - ideal for agricultural businesses, forestry businesses or energy-self-sufficient farms. Why this system? Br7Jnpxis0 ✅ Efficient energy generation from wood - environmentally friendly & sustainable ✅ Fully functional & well maintained - ready for use immediately ✅ Low operating costs & attractive feed-in tariff possible ✅ New price: €132,000 + €4,000 extras - now available at a top price! Technical data: • Manufacturer: Spanner RE² GmbH • Model: Type-30-5.7-V1.1 • Year of manufacture: April 2015 • Power: 30 kW

Condition: used, Year of construction: 2010, Overview    The brewhouse was built in 2010 by German manufacturer Kaspar Schulz and then expanded in 2014 with additional new equipment. The brewhouse has already been professionally dismantled and is immediately available. The full documentation and layouts are available upon request.   Technical details  Rash wort: 30 hl   Production capacity: Maximum 8 brews in 24 hours  Fully automatized (despite hop dosage)   Steam heated  Gentle-Boil method (SchoKo)   Scope of delivery  2 malt silos   4 roller mill | 800 kg/h   Brewhouse BRAUBLOCK 30 hl   Mash tun  Pre-flow vessel/ lauter tun  Wort kettle/ whirlpool  Hot water tank (HWT) 90 HL   Plate cooler  Wort aeration,   Spent grains pump  Brur93K8Qb3

Year of construction: 2009, operating hours: 1,500 h, Condition: used, Skid similar but not Dynajet, Oertzen, Falch, DIBO, ... S500-30E-C - High pressure pump: Speck P52/30-500 30l/min. at 500bar (year 12/16) - Engine: electric 30kW - 400l water tank Ky0P2Upb - pressure gauge - pressure regulator - safety valve - Steel frame powder coated - Aluminum covers - Forklift lugs - Dimensions with 400l water tank: approx. 1.250 x 1.510 x 1.260 - Empty weight: 426 kg - Year of construction: 2009, new high pressure pump12/2016 - Operating hours: approx. 1500 h

Condition: excellent (used), This machine combines a thread-rolling machine and a Saspi pointing machine in order to carry out the following tasks in a single feed processes of chamfering and threading or drilling and threading of parts. Dpthgx Saspi rolling machines satisfy the production needs of modern companies, allowing a quick response to the daily changing demands of the market, using the latest technology.

Condition: used, Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump -Drive: 1.5 kW 2910 rpm -Max. Delivery rate: 23.6 m³/h Bdafd0Hlui -Max. Pressure: bar -Max. Temperature: 100 °C -Number: 1x pumps available -Dimensions: 250/300/H755 mm -Weight: 60 kg

Condition: new, Year of construction: 2025, total height: 3,300 mm, total width: 1,045 mm, total length: 1,045 mm, pressing force: 80 t, table width: 700 mm, table length: 700 mm, table height above floor: 1,100 mm, overall weight: 5,500 kg, retraction force: 30 t, Equipment: safety light barrier, STANDARD FEATURES Steel construction body and parts with vibration method and stress / welding tension removed 8-surface slide / bearing for high precision and long-lasting use PLC control and touch panel Argon application for fixing elements and steel drawn pipes EN ISO 15614-1/2017 welding application certificate accredited by TÜRK-AK and approved by WPQR and WPS. (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) Parallelism and perpendicularity tolerances are applied according to ISO AND DIN Norms. (≤ 120 microns/meter) PARKER / REXROTH hydraulic unit SIEMENS / SCHNEIDER electrical consumables Automatic central lubrication system Two-hand control Cooling system TECHNICAL SPECIFICATIONS SPECIFICATIONS PRESSURE : 80/30 TON STROKE : 500MM POT CYLINDER STROKE : 150MM RAM-TABLE DISTANCE : 600MM DISTANCE BETWEEN COLUMNS : 700X700MM Dq3Wph PRESS DEPTH : 1045MM PRESS WIDTH : 1045MM TABLE HEIGHT FROM THE FLOOR : 1100MM PRESS HEIGHT : 3300MM MAIN CYLINDER DIAMETER : 200MM POT CYLINDER DIAMETER: 125MM MOTOR POWER: 11KW WEIGHT: 5500 COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 24 MONTHS WE HAVE A PRODUCTION CAPACITY FROM 40 TONS TO 300 TONS. SINCE WE ARE A MANUFACTURER, TECHNICAL SPECIFICATIONS CAN BE CHANGED ACCORDING TO REQUEST. CONTACT US FOR DETAILED INFORMATION.

Condition: excellent (used), Year of construction: 2015, With a view to optimized and energy-saving drives in the vehicle industry, significantly higher demands are placed on the components of the drive system. Higher power transmission and higher torques combined with smaller size are the challenges. This development has increased the demand for cold-formed splines. With the Vertical Splines Press (VSP) Sack & Kiesselbach provides the customer with a solution that offers technological and also logistical advantages compared to conventional technologies (such as roller burnishing or broaching). The relatively small and very user-friendly press can be configured both manually and as an automated system. In addition to the splines press, the customer can also obtain the appropriate die system and process technology from a single source. 1 used Vertical Splines Press make Sack & Kiesselbach type VSP 50/30 Year 2015 Technical data: Pressing force 500KN ram stroke 450 mm Closing speed 200 mm/s pressing speed 5,5 mm/s opening speed 120 mm/s table dimension 500 x 400 mm installation height 1000mm width between columns 530 mm splines cylinder speed 3-9,5 mm/s Dimensions height 2900 mm width 3100 mm depth 1400 mm Drive power 8 KW Special equipment Digital measuring system Bujtb2Pim8 Splines tool for internal splines

Condition: used, Automatic double cell unloader without pit for use in a squaring and edge banding line Motorized panel introduction transfer Double automatic panel unloading station Suction cup system for moving the panels Panel detacher Panels can also be worked in double rows Useful width of the panel 1300 mm Useful length of the panel 3200 mm Blwjt8Nwr3P Vacuum pump Motorized transfers for the introduction of panel stacks Motorized adjustment by automatic numerical control of the horizontal suction cup support bars Martyr panel management system Programming and control system

Condition: good (used), 2 Kemper spl15/ 1 Kemper spl30/ 2 Kemper spl75/ 1 Kemper 125 Bev8J08G7

Condition: good (used), Year of construction: 2009, operating hours: 15,000 h, Functionality: fully functional, total height: 35 mm, total length: 45 mm, total width: 45 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 400 rpm, feed length X-axis: 35 mm, feed length Y-axis: 45 mm, feed length Z-axis: 45 mm, Machine for pignons and wheels production Cajtha2Xbk

Condition: like new (used), Year of construction: 2018, Screw vacuum pump B9Xgt8We20 Manufacturer: Leybold Type: Screwline SP 630 Catalog No.: 117007 Status: Like new Warranty: 6 months

Condition: new, operation weight: 30,000 kg, Year of construction: 2025, TPW 30 AL - AS - PA with all-wheel steering and swing axles Dimensions Length: 6000 mm Width: 2200 mm Tires: 425x305 2x150 twin wheels with 8 tires Drawbar with drawbar eye 40 mm and height adjustment with drop guard Transport floor wood 40 mm Douglas fir Paint finish: RAL 2000 Bzuw2Kal8V Lifting brackets 4 pieces per long side see load securing

Condition: excellent (used), Year of construction: 2020, Fischer Lagertechnik vertical panel racking used Basic bay + add-on bay Overall height: 2285 mm Outer dimension depth 3000 mm Nominal height: 2160 mm Overall width: 920 mm Basic element Outer width dimension: 440 mm Additional element Access options: one-sided with castors Shelf type: Panel shelf Uprights RAL color: RAL 9010 pure white Mounting: Screw mounting Upright surface: lacquered Location: ex stock 54634 Bitburg - immediately available - Brzsyql7Yae Shelf is sold without contents

Condition: used, Year of construction: 2015, Functionality: fully functional, total length: 1,250 mm, total width: 700 mm, total height: 1,800 mm, overall weight: 700 kg, Manufacturer: Satisloh GmbH Type: SPS-30-1SL1A Year of manufacture: 2015 Workpiece: Diameter: Ø ≤ 1 – 30 mm Height: 30 mm Drfd22 Polishing tool diameter (dressing): 60 mm CNC axes: Number 3 Description: - B-axis: swivel head - X-axis: tool slide left/right - Z-axis: workpiece slide up/down Travel range: - B-axis: +/- 60° - X-axis: +/- 170 mm - Z-axis: 75 mm Workpiece spindle: Number 1 Speed 50 to 2500 rpm Connection ø12H6 x 20mm (DIN58767 - 12x20) Dressing spindle: Number 1 Speed 50 up to 2500 rpm Connection ø6 x 20 mm (collet, DIN58767 - 6x20) Dressing tool diameter max. 40 mm Tool spindle: Number 1 Connection ø12H6 x 20 mm (DIN58767 - 12x20) Speed 50 to 2500 rpm (polishing)                   100 to 6000 rpm (dressing) Machine dimensions: 700 x 1250 x 1800 mm (WxDxH) Machine weight: approx. 670 kg Connection voltage: 400 V/ 50 Hz Compressed air supply: 6 bar