Punching machine

Universal

Condition: excellent (used), Reach: 850 mm Payload: 5 kg Robot weight: 18.4 kg Protection class: IP54 Included: Lsdpfowtp Tyjx Aaxorg - Touchscreen tablet - Robot arm - Robot controller QUANTITY: 2 ROBOTS, PRICE PER UNIT Year: 2018 Reach: 850 mm Payload: 5 kg Robot weight: 18.5 kg Number of axes: 6 Gripper: included Control: touchscreen tablet + controller The price includes only the robot arm with the controller and control cabinet, excluding any additional equipment shown in the photos.

Condition: excellent (used), Model: UR-6-85-5-A Serial number: 2011203044 Year of manufacture: 2011 Weight: 17.8 kg Maximum load capacity: 5 kg Lrodpfx Ajwu Dnhsaxsg Country of manufacture: Denmark

Condition: excellent (used), Reach: 1300 mm Payload: 12.5 kg Weight: 33.5 kg Type: MSIP-REM-URK-UR10 Year of manufacture: 2018 Serial number: S300711 Welding machine Lorch S5 RoboMIG XT Cobot Lodsw N N Dcopfx Aaxjrg Welding current: 400 A.

Condition: excellent (used), Year of construction: 2019, Automatic workstation with robot UNIVERSAL UR10 Conveyor belt: total length approx. 200 cm UNIVERSAL UR10 industrial robot: Year of construction: 2019 Serial number: 2019301077 Maximum payload: 10 kg Maximum boom length: 1300 mm Lsdpfjvuzztox Aaxerg Weight: approx. 20 kg Equipment: teach terminal, machine housing

Condition: excellent (used), Year of manufacture: 2018 Reach: 1300 mm Payload: 10 kg Ljdpswtp Tmefx Aaxorg Robot weight: 28.9 kg Repeatability: ±0.1 mm Gripper: Schunk RH 907 Force sensor joint: AXIA80-ZC22 Software for controlling the above-mentioned devices and cameras (cameras not available) Control: handheld terminal + control cabinet Table not included

Condition: excellent (used), Model: UR5 Year of production: 2012/2013/2014 Ledpfx Aaowu Dr Texjrg Weight: 18.4 kg Maximum payload: 5 kg Reach: 850 mm Quantity: 4 units

Condition: excellent (used), Memmert Model: UFP 800 Standard Equipment • Electronic fuzzy-assisted PID process controller with continuous power adjustment and time-saving self-diagnosis system for quick fault detection (see section "Error Messages") • Language selection • Alphanumeric text display Ljdpfxoyazb Uj Aaxorg • Internal protocol memory with 1024kB for storing actual temperature, set temperature, air turbine, air damper, and error statuses with timestamp • Device control and actual value logging via MEMoryCard XL • Program control for up to 40 ramp segments • Adjustable air turbine for forced-air ovens (10% increments) • Servo-motor adjustable air damper (10% increments) for recirculated or fresh air operation • Integrated weekly timer with group function (e.g. weekdays) • Retractable push/turn knob for easy operation • Visual alarm indication • Built-in buzzer as alarm for limit violations, audible signal at program end, and for input acknowledgment (key click) • Digital monitoring controller for overtemperature, undertemperature, and automatic setpoint-following monitoring (ASF) • Mechanical temperature limiter (TB safety class 1) • Monitoring relay to switch off heating in case of failure • Two separate PT100 temperature sensors DIN class A in 4-wire design for control and monitoring • Convenient integrated 3-point temperature adjustment • Temperature-dependent chamber and door ventilation • Parallel printer interface (PCL3 compatible) • Serial RS-232C interface for computer-assisted temperature programming and reading the internal protocol memory Technical Data: Chamber: Stainless steel, highly stable and easy to clean due to deep-drawn ribbing Housing (outer body): Structured stainless steel, rear panel made from galvanized steel sheet UFP 800 is mobile and lockable on wheels External dimensions: Width 1190 mm, Depth 750 mm, Height 1620 mm Internal dimensions: Width 1040 mm, Depth 600 mm, Height 1200 mm Volume: approx. 749 liters Weight: approx. 170 kg Power supply: 3N~ 400 V 50/60 Hz Power consumption: approx. 4800 W 7A Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 400 h, General Data Machine weight 34 kg This 6-axis Universal Robots UR10e cell was manufactured in 2018. It features a load capacity of 10 kg and a range of 1300 mm. Weighing 33.5 kg, this robot arm is designed for tasks requiring precision and flexibility. Consider the opportunity to buy this Universal Robots UR10e cell. Contact us for more information. Application Types Lrsdpfox Tkbfex Aaxeg Robotics

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, overall weight: 33 kg, load capacity: 16 kg, arm reach: 900 mm, repeat accuracy: 0.05 mm, The robot is still in its original packaging and has been unused since purchase. Model UR16e – year of manufacture 2019 – as good as new – demonstration unit – with original packaging. In addition, we have had a protective cover made for blasting applications. Robot weight: 33 kg Payload: 16 kg Reach: 90 cm Protection class: IP54 Average power consumption: 585 W Repeatability: ± 0.05 mm Linear speeds: 1 m/s Force sensor: integrated Power supply cable length: 4.5 m Arm to control box cable length: 6 m Teach pendant (control tablet) cable length: 4.5 m Lsdpfx Aox Dir Ijaxjrg

Condition: excellent (used), Year of construction: 2016, Axial piston pump, hydraulic pump, oil pump, gear pump, screw pump -Manufacturer: Universal Hydraulics, hydraulic pump screw pump -Type: HSSPA-3/26.6-AVR-V4-01 -Motor: AC motors 3 kW Ljdpfx Ajvt Scljaxerg -Dimensions: 760/250/H300 mm -Weight: 39 kg