Planar bending machine

unbekannt Ø 1330 mm

Condition: new, table diameter 490 mm table load 300/150 kg swivelling range 0-90 manuell Grad table load horiz. 300 Kg table load vert. 150 Kg boring diameter 65 mm table turning speeds 0,4 - 4,0 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,1 t dimensions of the machine ca. 0,5 x 0,52 x 0,5 m The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - Infinitely adjustable rotation speed of the table Kfodpfxsgvkkto Af Soa - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking - Very good value for money

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 300 kg, Welding rotary table KT 600, with 100mm through hole Load horizontally 600 KG, tilted 300 KG Power consumption AC 380V, 50 Hz Rotary motor AC 400W Table diameter 650mm Kfsdevu Dpyepfx Af Sja Height 700mm, width 800mm, length 800mm Weight 155 KG Infinitely variable electric tilt range 0 – 90° Speed 0.2 – 1.9 rpm Welding current transmission max. 500 A Incl. hand remote control and foot remote control Surcharge: Quick-release jaw chuck Diameter 500mm, €750 CE mark/approval

Condition: new, table diameter 495 mm table load 300 / 150 Kg swivelling range 0 - 90 Grad tilt adjustment: manually/mechanicall manuell turning speeds 0,5 - 3,2 U/min spindle bore 65 mm Torque 375 Nm welding current 500 Ampere connected load frequency 230 Volt Kjdpsl R Nnvefx Af Ssfa Welding turntable with hollow shaft 300kg capacity With through hole rotation and tilt axis Infinitely variable speed Compact model Incl. foot pedal

Condition: new, Year of construction: 2024, load capacity: 300 kg, Welding rotary table Protec KT 300 H, 170/400 special version Load horizontal 300 kg, tilted 150 kg Power consumption 220 V, 50 Hz Table diameter 450mm Hollow shaft diameter 170mm Table height 500mm Welding current transmission 400 A Quick-change chuck diameter 300mm, surcharge €450.- Quick-change chuck diameter 400mm, surcharge €550.- Crank gear motor 0 - 90° stepless adjustment Kfjdpfx Asvu Anzjf Soa Speed stepless 0.01 to approx. 5 rpm. Incl. foot remote control Digital display with welding time limit (if required)

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. turning speeds 0,6 - 6,0 U/min swivelling range 0 - 90 Grad bore 60,0 mm motor 230 Volt weight of the machine ca. 56 kg. range L-W-H 385 x 340 x 375 mm Ksdpfoxabm Nox Af Sjfa Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: used, Year of construction: 1996, Universal bending machine Make: Indumasch, model Minibend 20 Year of manufacture: 1996 Kedpfx Aoxfr E Hjf Ssfa Technical specifications Brand: Indumasch Model: Minibend 20 Year of manufacture: 1996 Pressing force: 20 t Tool height: 100 mm X-axis stroke: 200 mm Hydraulic drive: 3 kW Connection: 400 V / 16 A Hydraulic oil: Mobil SHC, Capacity 20 L Dimensions: L 1.50 x W 0.55 x H 0.95 m (incl. control) Weight: 500 kg + control unit Equipment - Tech-In Siemens OP7 control - Various bending tools according to photo - Operating manual All information without guarantee. A powered demonstration is possible at any time in our exhibition hall.