Punching Machine

Trumpf TRUMATIC 500

Condition: ready for operation (used), Year of construction: 1998, total height: 2,300 mm, overall weight: 13,800 kg, product length (max.): 6,900 mm, This TRUMPF TRUMATIC 500 was manufactured in 1998. It features a maximum punching force of 220 kN and can handle sheet thicknesses up to 6 mm. The machine accommodates workpieces up to 150 kg, with a working range of 2500 mm on the X-axis and 1250 mm on the Y-axis. It requires a 400 V power supply and 6 bar of compressed air. Contact us for more information about this machine. • Maximum punching force: 220 kN (approx. 22 t) • Maximum sheet thickness (steel): 6 mm • Maximum punching diameter: 76.2 mm • Maximum workpiece weight: 150 kg Cjdpfex Uqzzex Aaqsgn • X-axis working range: 2500 mm without repositioning • Y-axis working range: 1250 mm • X-axis speed: up to 90 m/min • Y-axis speed: up to 60 m/min • Stroke rate: up to 900 strokes/min in nibbling mode • Power supply: 400 V / 50 Hz, three-phase • Connected electrical load: approx. 19 kVA • Required compressed air pressure: 6 bar • Includes a large set of punches, dies, and tool holders • The machine is in working condition. Dimensions Machine Depth 6000 mm

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 47,000 h, laser power: 2,000 W, punching force: 76 t, workpiece weight (max.): 120 kg, working range: 2,500 mm, Equipment: cooling unit, safety light barrier, Special features: + Thread forming function with thread breakage detection + MultiTool function + Marking/Fast beading function + Repositioning cylinder + Sensor for part chute Standard features: - Stable C-frame - Coordinate guide with integrated linear magazine - 21 pockets for tools and clamps - 2 clamps - Drives: maintenance-free three-phase servo motors - Brush tables - TCF1 laser (2000W) - HI-LAS high-pressure cutting - Fast machining with SprintLas - Programmable Cutting gas selection/pressure adjustment - Laser cutting head with 5" lens - Cutting head quick-change device - APC capacitive height control - Lens monitoring sensors - Laser logbook function - Compact dust extractor - Rotating tool holder - Automatic repositioning device with hold-down clamp - Automatic part chute for parts 300x500 mm - Automatic tool changer with 19 stations - 2 clamps - Good parts container - Spray lubrication for punches - 2nd lubricant container - Punch slug extraction system - Chip bucket - Hydraulic quick shut-off system - External control panel - 15" TFT touch color screen - USB stick interface - 3.5" floppy disk drive Cgodpfowcq Hgox Aaqon - Safety features - RJ45 network connection - Network connection - Detailed operating instructions - Remote diagnostics system

Condition: ready for operation (used), Year of construction: 1997, Working area: 2500 x 1280 mm Cgjdpfx Aex Tr S Seaqen Punching force: 220 kN For sheet thickness up to: 8 mm Weight approx.: 11 t

Condition: good (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 041613, Punching and nibbling machine TRUMPF Trumatic 500 Year of manufacture: 2000 Cgedpfjx Td Edex Aaqsn

Condition: excellent (used), Year of construction: 2001, operating hours: 47,000 h, Large format Cedpfxsxl R I To Aaqjgn Operating hours: 47,000 hours

Condition: ready for operation (used), functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,270 mm, workpiece weight (max.): 150 kg, Punching and nibbling machine with TRUMALIFT Sheetmaster! TECHNICAL DETAILS Press force: 220 kN Max. sheet thickness: 6.4 mm Travel path X-axis: 2,500 mm Travel path Y-axis: 1,270 mm Cgsdpfxex I Hh Re Aaqsn Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Positioning speed simulation: 108 m/min Positioning speed rotary axis: 360°/sec Punching diameter: 76.2 mm Minimum programmable increment: 0.01 mm or 0.01° Workpiece weight: 150 kg Tool stations: 15 pcs Tool change time: 1.5 - 6.5 sec MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,400 x 5,800 x 2,100 mm Machine weight: approx. 11,050 kg EQUIPMENT Multitool control "Softpunch" function Pneumatic follow-up cylinders Small parts sensor for programmable part chute Parts box for finished parts Chip conveyor with container Scratch-reduced processing Air-cushioned mounting Additional clamping bridge Prepared for TRUMALIFT SheetMaster TRUMALIFT Sheetmaster for workpieces up to 2,500 x 1,250 mm Alignment system for loading stack with spreader magnets Manually movable scrap grid system

Condition: ready for operation (used), Year of construction: 1998, operating hours: 30,430 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, punching diameter: 76 mm, TECHNICAL DETAILS Pressing force: 220 kN Maximum sheet thickness: 6.4 mm Punching diameter: 76.2 mm X-axis travel: 2,500 mm Y-axis travel: 1,250 mm Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Positioning speed (simulation): 108 m/min Positioning speed rotary axis: 360 °/sec Cjdpfx Ajxhfu Hsaqsgn Workpiece weight: 150 kg Smallest programmable increment: 0.01 mm or 0.01° Tool stations: 15 units Tool change time: 1.5 - 6.5 sec MACHINE DETAILS Dimensions & Weight Dimensions: 6,400 x 5,800 x 2,100 mm Approx. machine weight: 11,050 kg Operating hours: 30,430 h

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, punching force: 18 t, working range: 30,001,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, Very well maintained and fully serviced used Large format Trumpf 3000 cnc punch press for sale Manufacturer TRUMPF Type TruPunch 3000 (S11) Year 11/2012 Cgjdpfsxrnggex Aaqjn Working area 3000 x 1500 mm - without reposition Working range on cross-side (X-axes) 3000 mm Working range along (Y-axes) 1600 mm Large throat 1600 Complete with multi tool capability Type S11 Video available upon request

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, punching diameter: 76 mm, TECHNICAL DETAILS Sheet thickness - max.: 6.4 mm Pressing force: 220 kN Cgedpfxowur Dqe Aaqjn Workpiece weight: 150 kg Punching diameter: 76.2 mm X-axis travel: 2,000 mm Y-axis travel: 1,250 mm Positioning speeds Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Simulation positioning speed: 108 m/min Positioning speed rotary axis: 360 °/s Smallest programmable path dimension: 0.01 mm or 0.01° Tools Tool stations: 15 tools Tool change time: 1.5 - 6.5 s MACHINE DETAILS Machine dimensions: 6,400 x 5,800 x 2,100 mm Machine weight: approx. 11,050 kg

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,650 mm, workpiece weight (max.): 230 kg, TECHNICAL DETAILS Cutting force: 220 kN Working area: 3,085 x 1,650 mm Max. sheet thickness: 8 mm Max. workpiece weight: 230 kg Control Control: Bosch Trumagraph CC 220 MACHINE DETAILS Machine weight: 13,800 kg Space required: approx. 7,900 x 6,300 x 2,200 mm Electrical specifications Mains connection: 400 V, 50 Hz Connection power: 19 kVA Supply voltage: 400 V Cgodpfjwcqfpjx Aaqjn Control voltage: 24 V Required fuse: 3 x 35 A Compressed air Compressed air connection: 6 bar

Condition: excellent (used), Year of construction: 2017, operating hours: 8,800 h, laser power: 2,000 W, ONLY approx. 8,700 hours of operation - available immediately Used fiber tube laser cutting machine with automatic feed and discharge Manufacturer: DURMA Model: TC HD-60170 Year of manufacture: 2017 (commissioned in June 2019) Control: Siemens Sinumerik 840 D SL Operating hours: ONLY approx. 8,700 hours Possible cutting variants of the profile: round, square, rectangular TECHNICAL DATA: Max. tube diameter: 170 mm Max. profile dimensions in a square: 120 x 120 mm Max. profile dimensions in a rectangle: 150 x 100 mm Min. tube diameter: 20 mm Max. material length: 6,500 mm Min. material length for automatic loading: 3,000 mm Material length of the last cut: 185 mm Unloading length: 6,000 mm Max. material weight: 37.5 kg/m Max. total workpiece weight: 210 kg Max. bundle weight: 3,000 kg X axis: 90 m/min. Y axis: 50 m/min. Z axis: 45 m/min. A axis: 1200 °/s. Max. cutting thickness: - Structural steel: 8 mm - Stainless steel: 4 mm - Aluminum: 6 mm - Copper: 2 mm - Brass: 4 mm Laser power: 2,000 watts Laser source: IPG Fiber Space requirement: 16,000 x 7,400 mm Machine weight: 20,000 kg EQUIPMENT: - Precitec cutting head (Light Cutter) - Vanterm compact filter system - Automatic weld seam detection - Automatic real-time measuring system for centering chucks AUTOMATION: - Automatic loading system (6,500 mm) - Unloading unit (6,000 mm) - Conveyor belt for unloading including small parts conveyor to the rear SAFETY: - Light barriers Detailed information and the machine layout can be found under Documents for download. Cjdpfxevylnze Aaqjgn Subject to prior sale. Sale excluding any guarantees and within the framework of our general terms and conditions. All statements without guarantee.