TRUMPF TrumaBend V170

TRUMPF TrumaBend V170

Condition: used, Year of construction: 2001, functionality: fully functional, operating hours: 38,990 h, Hydraulic Press Brake Manufacturer: TRUMPF Model: TrumaBend V170 Year: 2001 Nodpfx Aaeyvqiuj Eewg Technical Details Manufacturer: TRUMPF Model: TrumaBend V170 Year of manufacture: 2001 Operating hours: 38,990 h Pressing force: 170 t Bending length: 4080 mm Stroke: 365 mm Frame gap: 3680 mm Table width: 200 mm Throat depth: 410 mm Rapid traverse: 200 mm/s Working speed: 1 – 11 mm/s Return speed: 135 mm/s Connected load: 21.4 kVA Oil capacity: 350 l Dimensions (approx.): L 4.70 x W 2.40 x H 2.98 m Weight: 18 t Features • DA 2D graphic control • Hydraulic upper and lower tool clamping • Hydraulic WILA tool system • CNC-controlled crowning • Controlled axes: X, R, Y1, Y2 • 4 movable backgauge fingers, pneumatically clamped • Upper tool: 60°/R4, H 195mm, L = 3,850mm, segmented • Lower tool: V16/30°, R 1.6, H 100mm, L = 3,550mm, segmented • Lower tool: V40/80°, R 5, H 100mm, L = 3,100mm, segmented All information without guarantee. A powered demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 1997, pressure 130 t chamfer lenght 3060 mm distance between columns 2690 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec table width 120 mm table height 1050 mm tiltable up to +/- 10.0 mm Number of working hours ca. 31.800 h compressed air 5.0 - 7.0 bar oil volume 250 l operating pressure 340 bar voltage 400 V total power requirement 23.0 KVA weight of the machine ca. 12950 kg range L-W-H 3660 x 2310 x 2900 mm Machine in a well-maintained condition (!!) with only approx. 31.800 operating hours - in checked condition - machine video - ?v=PBV-MDtZnlE Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA 65 * swiveling control panel, front left * 2D graphic programming & product display * Tool & program library * USB keyboard and mouse interface - CNC controlled axes: Y1 + Y2 / X1 + X2 / R1 + R2 / Z1 + Z2 / I axis - CNC controlled back stop (X1 + X2 axis) - CNC controlled height adjustment of the back stop (R1 + R2 axis) - CNC controlled adjustment of the stop fingers (Z1 + Z2 axis) - CNC controlled, pneumatic die displacement (I axis) - CNC WILA electro-motoric table crowning - TRUMPF hydraulic upper tool clamping - TRUMPF manuel Lower tool clamp - 1x freely movable 2-hand / foot control Njdpfxjxacfmj Aa Eowg - Safety device at the rear (sliding door) - Safety device at the side (swinging door) - Original operating instructions + spare parts list

Condition: excellent (used), functionality: fully functional, controller manufacturer: Delem, bending force (max.): 170 t, control type: CNC control, number of axes: 4, type of crowning: CNC-controlled, Equipment: CE marking, foot remote control, lower tooling, safety light barrier, upper tooling, Used Trumpf Trumabend V170 CNC Hydraulic Press Brake For Sale Subcategory: Press Brakes Tonnage: 170Ton Manufacturer: Trumpf Model: V170 Trumabend Condition: Used Trumabend DA65 2D CNC Controls 4 Axis machine, complete with i axis 2 Axis CNC Back Gauges R and X Axis complete with 4 fingers on the back stop CNC Ram Control Y1, Y2 CNC Bed Crowning Die Shift (iaxis) Nsdpfjx R Ul Aox Aa Eewg Pedestal Controls Electric Foot Switch Safety Light Guards

Condition: ready for operation (used), Year of construction: 1997, Press force: 1700kN, bending length: 4000mm, stroke: 215mm, installation height: 365mm, passage width: 3680mm, throat depth: 410mm, feed speed: 200mm/s, bending speed: 1-10mm/s, retraction rate: 135mm/s, working height: 1050mm, control: Delem. Including spare parts and accessories. Documentation available. Nwedpfx Aajtqfqio Esg

Condition: used, Year of construction: 1996, pressure 130 t chamfer lenght 3060 mm distance between columns 2690 mm column arm 410 mm stroke 215 mm dayligth 385 mm ajustment speed 200 mm/sec working feed 1-10 mm/sec return speed 135 mm/sec table width 120 mm table height 1050 mm tiltable up to +/- 10 mm Number of working hours 53.820 h compressed air 5.0 - 7.0 bar oil volume 250 l operating pressure 340 bar voltage 400 V total power requirement 16.0 KVA weight of the machine ca. 11250 kg range L-W-H 3640 x 2210 x 2375 mm - in checked condition - machine video - ?v=23IbxRaZ2KA Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control model DA 65 * swiveling control panel, front left * 2D graphic programming & product display * tool & program library * including new TFT-LCD industrial monitor - CNC controlled axes: Y1 + Y2 / X / R - CNC electro-motor / controlled back stop (X axis) - CNC electro-motor / controlled height adjustment (R axis) - manual adjustment of the 2x stop fingers, from the front (Z axes) - manual adjustment of the die displacement, from the front (I axis) - WILA manual table crowning, including analog value display - TRUMPF hydraulic upper tool clamp - TRUMPF manual lower tool clamp - 1x freely movable 2 hand / foot control - Safety device at the rear (sliding door) Nedpexabqbefx Aa Eswg - Safety device at the side (swinging door) - Original operating instructions + CE declaration + circuit diagram

Condition: excellent (used), Year of construction: 1997, pressure 170 t chamfer lenght 4080 mm distance between columns 3680 mm column arm 410 mm dayligth 385 mm stroke 215 mm ajustment speed 200 mm/sec working feed 1-10 mm/sec return speed 135 mm/sec table width 200 mm table height 1050 mm Number of working hours 25.430 h oil volume 350 l total power requirement 29 KVA weight of the machine ca. 16.450 kg. range L-W-H 4620 x 2210 x 2885 mm Machine in good condition Regularly serviced by the manufacturer CNC backgauge with 8 axes (!!) - in checked conditions - machinevideo - ?v=yEaRj0XJAC4 Equipment: - CNC electro-hydraulic press brake/die bending press - DELEM CNC control - swiveling front left * High-resolution graphic screen * Clear, concise menus in the operator's language * Large tool and product library * Graphic 2D programming * Automatic bend sequence calculation and collision detection * Emergency stop button at front - CNC axis adjustment: * Y1 - Y2 - X1 - X2 - R1 - R2 - Z1 - Z2 axis + CNC crowning - X axis - adjustment speed: 500 mm/sec. * Max. stop range: 860 mm Nedpoxcp Rbjfx Aa Ejwg - R axis - Adjustment speed: 300 mm/sec. * Max. travel: 250 mm - Z axis - Adjustment speed: 1000 mm/sec. * Max. travel: 3260 mm - CNC electric motor table crowning - CNC electro-pneumatic die shift (I axis) - WILA / TRUMPF upper tool clamping - hydraulic - WILA / TRUMPF lower tool clamping - hydraulic - 2x front, robust support arms - movable - 1x freely movable 2-hand/foot control - 1x freely movable foot switch - Side safety device (swivel doors) - Rear safety device (sliding doors) - Original operating instructions

Condition: good (used), Year of construction: 1997, machine/vehicle number: 887043, Offer 24557 Technical data: - max. working length 4060 mm - column clearance 3680 mm - max. pressing force 1700 kN - max. distance table / ram 385 mm - column projection 410 mm - ram stroke 215 mm - stroke speeds - downward speed idle max. 200 mm/sec - upward speed 135 mm/sec - downward pressing speed 1 to. 11 mm/sec - Total drive power 30 kW - Space requirement approx. W 5600 x H 3000 x D 2400 mm Nsdpfxsu T Nkno Aa Eswg - Weight approx. 18000 kg - with: - with 6-axis CNC control DELEM - Two-hand control panel with foot switch - Crowning device - Controlled back stop with height adjustment 5 - 860 mm - Hydraulic upper + lower tool clamping - Die table displacement pneumatically supported

Condition: used, Year of construction: 2006, pressure 100 t chamfer lenght 3100 mm Nwodpfxsw Rf His Aa Eeg distance between columns 2550 mm column arm 400 mm table height 925 mm stroke 200 mm control Cybelec DNC 8805 output 11 kw total connected load 15 kW weight of the machine ca. 9,0 t range L-W-H 5,2 x 2,1 x 2,9 m Used CNC- press brake - some upper tooling (no lover tooling) - Infrared security device - documentation - hydraulic Crowning - 2 axis backgauge X + R

Condition: used, Year of construction: 2008, pressure 120 t chamfer lenght . mm distance between columns 2550 mm stroke 200 mm total power requirement 13,2 kVA Number of working hours 2500 h workpiece 1 Satz Standart workpiece 1 Satz Standart Prisma Number of strokes 11000 Nwodpfx Aoyqvfcea Eeg weight of the machine ca. 8,3 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2001, pressure 130 t chamfer lenght 3060 mm distance between columns 2690 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec table width 120 mm table height 1050 mm tiltable up to +/- 10.0 mm Number of working hours ca. 31.800 h compressed air 5.0 - 7.0 bar oil volume 250 l operating pressure 340 bar voltage 400 V total power requirement 23.0 KVA weight of the machine ca. 12950 kg range L-W-H 3660 x 2310 x 2900 mm Equipment: - CNC electro-hydraulic folding/die bending press - DELEM CNC control - swiveling front left * High-resolution graphic screen * Clear, concise menus in the operator's language * Large tools and products library * Graphical 2D programming * automatic bending sequence calculation and collision detection * EMERGENCY stop button at the front - CNC axis adjustment: * Y1 - Y2 - X - R axis CNC crowning * Manual adjustment of the 2x stop fingers, from the front (Z axes) - CNC electro-motorized table crowning - CNC electro-pneumatic die displacement (I axis) - WILA / TRUMPF upper tool clamping - hydraulic - WILA / TRUMPF lower tool clamping - hydraulic - 2x front, robust support arms - movable - 1x freely movable 2-hand/foot control - 1x free-moving foot switch - Lateral safety device (hinged doors) - rear safety device (sliding doors) - original operating instructions ( french ) Njdeyn R Hvopfx Aa Eswg