Machining center

SCM TECH 90 SUPER

Condition: good (used), Year of construction: 1999, cutting length (max.): 4,200 mm, cutting height (max.): 115 mm, Panel saw with lifting table loading Manufacturer Scheer Type PA 7004 horizontal panel dividing saw with automatic lifting table loading with cutting optimization software in 11.2020 new PC with DNC-AT control, operating system Linux with PA software S5 Cutting length 4200 mm Travel path of the material pusher 4250 mm Cutting height 115 mm Maximum saw blade projection 135 mm Panel saw size FM22 Main saw blade maximum diameter 450 mm Scoring saw blade maximum diameter 200 mm Saw blade bore 30 mm Feed speed of the saw 0-100 m/min. Return speed of the saw 100 m/min. Number of collets 7 pieces Feed speed of the material pusher in the forward direction 30 m/min, in the return direction 70 m/min. Remaining section device SP5004 Saw motor 11 kW, scoring unit 2.2 kW Saw feed motor 1.1 kW, table feed motor 1.63 kW Lifting table motor 4 kW, drive motor for roller conveyor 0.37 kW Total power 20.4 kW Itodevyyn Njpfx Af Ssr Front air cushion support tables 3 pieces Width of the tables 800 mm, length 2000 mm Compressed air maximum 6 bar, limit pressure 7 bar Compressed air hose diameter 10 mm Air consumption approx. 15 liters per cycle Angle pressing device WP 5033 Lifting table device with driven roller conveyor Dimensions 1700 mm x 4700 mm 3 x suction connection diameter 120 mm Documentation available Declaration of conformity available

Condition: good (used), Year of construction: 2003, functionality: fully functional, VITAP Inserix semi-automatic drilling, gluing and dowel inserting machine Year of construction 2003 Manufacturer: VITAP Italy S/N 300951 23 spindles / drilling head Itedpfx Astvzf Nef Sjr Center distance 32mm Total center distance between the first and last spindle: 704mm Max. Drilling depth 70mm Spindle rotation 2800 /min Motor 2.5 HP Tools 5 Dowel diameter 6 / 8 / 10 / 12 mm Dowel length 20-40mm Air pressure 6-8 atm CE-marked Size: L x W x H = 1600 x 940 x 1700mm Weight 450 kg

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 402, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 70 mm, saw blade diameter: 300 mm, cutting height (max.): 70 mm, cutting width (max.): 3,200 mm, Equipment: scorer, Cutting length: 3200 mm Cutting width: 3200 mm Width stop: Gear motor adjustment Main saw unit: saw blade Ø 300, Ø 30, Z=60, SH 70 Scoring unit: yes - saw blade Ø 125, Ø 20, Z=24 Softforming unit: no Side pressure unit: yes - Version: FR 50/100 Residual cutting device: yes - Pressure beam recess Veneer cutting device: yes Trimming device: yes - Spacing: 145/525/1790 Support table front: 400 x 1400 mm - 2 pieces Itodpjvi H Diefx Af Ser Rear support table: 240 x 2960 mm - 1 piece Support bars rear: 40 x 2960 mm - 5 pieces Angled table: 480 x 1400 mm left Angle ruler: with pull-out Collets: 4 pieces - floating - distance 70/400/1600/2800 Stop jaw: 2 pieces - rigid - distance 1000/2200 additional foot at the rear : no - 3 feet safety guard: yes foot switch : no Machine cuts from: left to right unit can emerge in any area: no automatic lowering with saw overtravel: no 3-step cutting height adjustment: no Main circular saw: 7.5 kW, 380 V, 2870 rpm, 50 Hz Scoring saw: 1.1 kW, 380 V, 2800 rpm, 50 Hz Width stop adjustment motor with torque compensation: fine input motor: 0.12 kW, 380 V, 1380 /min, main motor: 0.35 kW, 380 V, 1350n.

Condition: new, Year of construction: 2025, extraction capacity ~ 6500 m3/h engine power 5.5 kW rotation speed 3000 rpm nominal voltage 400 V, 50 Hz extraction nozzle 280/200 mm extraction speed 28 m/sec. Number of filters 35 DIMENSIONS (length x width x height) 920 x 2100 x 2250 mm weight 410 kg Filter category G Filter material polyester Noise level 80 dB without connection / 65 dB when connected via pipe to the machine Filter surface 17.1 m2 Negative pressure 3000 Pa Polyester filter, 3 microns 2 containers Drive system Filter cleaning using vibration system with control + 850 euros for the models with fire extinguisher (Safe System) Iodpfxov Du Tns Af Sjtr + 500 euros for the models with inverter (speed control)

Year of construction: 1997, condition: ready for operation (used), A Homag horizontal panel saw is available. Saw blade outer diameter: 300mm, saw blade inner diameter: 75mm, speed: 4550rpm, scoring saw blade outer diameter: 125mm, scoring saw blade inner diameter: 45mm, speed: 5100rpm, cutting height: 50mm, cutting width: 1250mm/2200mm, workpiece length: 3200mm. Total system dimensions X/Y/Z: approx. 4700mm/5000mm/2000mm, machine weight: approx. 3500kg. Including saw blades and various spare parts. Documentation available. On-site inspection is possible. Itsdpfjwxxvuex Af Sor