Sliding table saw

SCM SI320

Condition: used, Year of construction: 1997, - edge banding unit - Cross-cutting unit - Milling unit - Fine trimming unit - scraper Rodpfxod Inkts Abbjt - buffing unit

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 with gluing unit for hot-melt adhesive granules Glue reservoir located below the glue roller Glue application to the workpiece via glue roller in both co-rotating and counter-rotating modes automatic edge magazine for coil material and fixed lengths Pressure zone with pneumatically-driven main pressure roller and special post-pressure rollers to compact the upper and lower glue joint Centrally adjustable upper pressure Central manual chain conveyor lubrication Control panel at machine infeed End trimming unit (saw aggregates) for front and rear edge overhang with high-precision linear guides 2 motors, each 0.18 kW Swivel range for straight and bevel cutting 0–15 degrees Flush-milling unit, top and bottom, with vertical and horizontal tracing Swivel range 0–15 degrees with 2 milling motors, each with replaceable insert cutter combinations (straight/radius) Digital counters enable rapid and precise, i.e., repeatable, settings Two-point pneumatic adjustment for upper and lower milling motors Scraper unit for finishing processing with horizontal/vertical tracing Rsdexya Rtjpfx Abbot Support table extendable up to 350 mm Integrated section control for contactless operation of processing functions. Settings via keyboard and LED display Workpiece thickness: 8–50 mm Edge thickness: 0.4–3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air connection: 6 bar Weight: approx. 750 kg Machine length: 3,150 mm Availability: short term Location: Flörsheim

Condition: good (used), Year of construction: 2008, functionality: fully functional, operating hours: 1,400 h, power: 11.5 kW (15.64 HP), workpiece height (max.): 50 mm, edge thickness (max.): 8 mm, total length: 5,860 mm, Single-sided edge banding machine, right-handed version For hot-melt adhesive bonding. Quick-change adhesive unit for hot-melt glue. Can process PU adhesive granulate in compliance with adhesive processing regulations. Glue reservoir positioned leak-proof below the glue roller. Precisely metered glue application to the workpiece via glue roller; no adjustment required for varying workpiece thickness. Selectable glue roller rotation: co-rotating or counter-rotating direction. Glue temperature monitored via electronic thermostat. Automatic glue temperature reduction during work breaks. Infrared hot-melt adhesive activation. Rodpfx Absyud S Eebot Automatic edge magazine for rolls and fixed lengths, including roll holder, Ø 800 mm. Equipped with reinforced pre-cutting shears for thick PVC/ABS, max. 3 x 45 mm. Centrally adjustable top pressure. Control panel at machine infeed. Electronic control system: power control PC 20+ BRANDT control system with color graphics user interface for easy and convenient operation and programming. Technical details: - Tiltable operator panel at machine infeed - Durable short-stroke membrane keyboard - Color graphic flat screen - Industrial PC with Compact Flash disk as mass storage - Aggregated function keys with LED status indicators - Color pictograms to assist user navigation - Online language switching between various foreign languages - Display of essential machine target and actual states - Status messages in plain text - Easy selection and correction of position points - Simple axis adjustment (with suitable unit configuration) - Online help in plain text via accessible help menu - Production data acquisition for production time, edge length, and workpiece count—daily and total values - Inspection and maintenance interval display - Remote service capability via integrated modem and installed service software - Save processing programs - Production according to processing programs - Data backup of processing programs

Condition: good (used), Year of construction: 2006, - Infeed fence: manually adjustable - Jointing milling unit with 2 motors, each 2.2 kW: both motors pneumatically controlled - Hot-melt adhesive application - Pressure zone: with 1 main pressure roller and 3 follow-up pressure rollers - End trimming unit with 2 motors, each 0.35 kW: automatically adjustable via program from chamfer cuts to straight cuts - Edge milling unit with 2 motors, each 0.55 kW: for flush milling, bevel milling, or radius milling with 4-point fixed position adjustment for side tracing - Groove milling unit: with horizontal spindle - Copy milling unit with 2 motors, each 0.35 kW: with pneumatic infeed and outfeed control - Profile scraper unit: with pneumatic infeed and outfeed control Rsdpfx Aboy Av A Hjbst - Flat scraper unit - Buffing unit

Condition: used, machine/vehicle number: AN004439, Anzahl Bohrspindeln : 2 Stk Teilung : 32 mm Bohreraufnahme : Schnellspannfutter Bohrerschaft: 10 mm Bedienung : Fußpedal Werkzeuge : Ja mm Bohrrichtung : von unten & stirnseitig max. Durchlasshöhe : 60 mm Anzahl Materialspanner : 2 Stk Art der Materialspannung : pneumatisch Ausführung : stationär Rodpfouuu Rkox Abbot Anschlagsystem : für Lochreihe und Konstruktionsreihe Gewicht ca. : 300 kg Motorleistung : 2+3 PS

Condition: repair required (used), Year of construction: 1996, Edge banding machine Brandt Optimat KD 69 0 In need of repair, the control system no longer functions properly Without premilling Edge trimming front/rear Corner rounding top/bottom Corner rounding front/rear Scraper top/bottom Rjdpoylttgjfx Abbjt Polishing top/bottom