Condition: good (used), Year of construction: 2013, IFP Europe KP 50 HMA Basic Vacuum Parts Washer Mfd. 2013 S/N: 201305-00974 Specifications: Number of Baskets per Wash Cycle 1 Basket Size 11.9″ x 7.9″ x 17.7″ Machine Dimensions 70″ x 103″ x 70″ Chiller Size 5 ton Solvent Capacity 106 Gallon Wash Cycles Per Hour 4 to 8 Chamber “Max. Load Weight” 110 lbs Machine Weight 4,000 lbs Equipped With: Rotos & Vane Pumps, Liquid Ring Tank, Rust Inhibitor Tank Filter, Waste Oil Separator, Siemens Touch Screen Control, Budzar BWA-AC-05-FCB-12-0-000 5-HP Chiller, Safety Guarding, Light Curtains, Automatic Door, (3) Wash Settings, Rust/Vap/Mist/Vac/Oscillation Settings, 100-Lb. Batch Weight Repairs necessary: Pumps Kodpfx Ajx Ddc Iogpelu C301.00020 DVP LC106 Vane Pump — $5,500.00 C301.00078 Liquid Ring Pump — $3,561.55 C301.00081 RBS 45 Rotary Lobe Pump — $13,500.00 Pump Subtotal: $22,561.55 Accessories / Pipes for Conversion A508.00031 — $287.50 A508.00012 — $287.50 A508.00013 — $345.00 Accessories Subtotal: $920.00 Grand Total $23,481.55

Condition: used, Year of construction: 2007, operating hours: 860 h, functionality: fully functional, sweeping width: 800 mm, fuel type: electric, construction height: 1,270 mm, drive type: Elektro, Scrubbing machine Condition: Ready for use and fully functional Technical condition: very good Front tire type: Solid rubber Rear tire type: Solid rubber Battery voltage: 24V Battery capacity: 240Ah Battery manufacturer: HSR Battery type: PzS Battery year of manufacture: 2021 Kljdpfozfb A Ujx Agpju Description: In addition to this machine, we offer other forklifts and warehouse equipment. Our equipment has been inspected by our workshop and certified according to FEM4.004. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used equipment, even if you do not purchase a vehicle from us. Lease purchase and financing at favorable conditions are available upon request. We will be happy to provide you with competent and detailed advice on our vehicles.

Year of construction: 2026, condition: new, functionality: fully functional, Equipment: CE marking, documentation/manual, The Wattsan 100W is a brand-new portable laser metal cleaning machine. This model has 1 mirror and 1 seam type. Due to its air cooling system, the machine is quite small in size. It’s quiet, fast and easy to use. It is ideal for removing rust, paint, petrochemicals, oxide layers, welding scales, carbon deposits, etc. from metal items. This portable machine can also clean adhesive and galvanised materials as well as plaster and stone products. Thanks to pulse cleaning, this machine can clean thick layers of rust, paint, petroleum products, oxide films, scale and carbon deposits from metals without heating or damaging it. You can give our managers a call for additional details! Wattsan Cleaning 100 W machine characteristics: Cooling: Air Laser power: 100 W Machine size: 750x600x680 mm Kedpfx Ager Hbwkepelu Laser source: JPT Weight: 46 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, The Wattsan 200W is a brand-new portable laser metal cleaning machine. Due to its air cooling system, the machine is quite small in size. It’s quiet, fast and easy to use even for a begginer. It is ideal for removing rust, paint, petrochemicals, oxide layers, welding scales, carbon deposits, etc. from metal items. This portable machine can also clean adhesive and galvanised materials as well as plaster and stone products. Thanks to pulse cleaning, this machine can clean thick layers of rust, paint, petroleum products, oxide films, scale and carbon deposits from metals without heating or damaging it. You can give our managers a call for additional details! Klsdpsr Hbx Tofx Agpju Wattsan Cleaning 200 W machine characteristics: Cooling: Air Laser power: 200 W Machine size: 750x600x680 mm Laser source: JPT Weight: 46 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Year of construction: 2026, condition: new, functionality: fully functional, Equipment: CE marking, documentation/manual, Ease up your production with a Wattsan CW cleaning machine, continuous and with water-cooling. It can remove rust, paintwork, oil products, oxide coatings, welding scales, and carbon deposits from a variety of metals. This model features 1 type of cleaning seam. Kodpoiicgksfx Agpjlu There are no consumables and no need for a significant amount of necessary space. Compact, portable laser cleaner that can work at any angle and in the most inaccessible places. The chiller is also built-in. The fiber length is 8 meters. The laser gun is lightweight and comfortable for long-term use. You can give our managers a call for additional details! Wattsan CW Cleaning machine characteristics: Cooling: water Laser power: 1000-3000 W Machine size: 880*560*1010 mm Laser source: JPT / Raycus Weight: 145 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: good (used), Ride-on scrubber-dryer, scrubber-dryer, floor cleaning machine, mop, floor cleaner, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter -Air filter: Intake air filter -Type: unfortunately without a type designation -Inside/Outside: Ø 215/350 mm -Dimensions: Ø 350 x 605 mm Ksdpfx Aszd Ac Tsgpjlu -Weight: 6.1 kg

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, overall weight: 30 kg, Factory liquidation for mask production. Installed in 2021, out of operation since March 2022. The equipment has already been dismantled and is ready for delivery. Stationary industrial vacuum cleaner Power: 2.2 kW Airflow: 300 m³/min Suction connection: 40/50 mm Weight: 30 kg Kljdpfxoxqghto Agpju

Condition: used, This IPC Gansow 61 BF 68 floor scrubber/sweeper is being auctioned off in our industrial auction / machinery auction, which also includes motorcycles, motorcycle parts, car rims, car tires, motorcycle jackets, machinery, cardboard boxes, and more. You can find this and many other items on our platform. Kodpfxezfhyms Agpolu

Condition: excellent (used), Year of construction: 2004, operating hours: 292 h, overall weight: 160 kg, I am selling a Stolzenberg TTE 1000 sweeper. Stolzenberg TT E 1000 is a self-propelled sweeper with electric drive (batteries) designed for daily sweeping of large indoor areas (up to 8000m²), such as parking lots, small production halls and showrooms, etc. The suction system used allows removing dust and fine dirt also from textile surfaces (carpets, rugs). The sweeper does the work with two disc (side) brushes and cylindrical brushes, made of abrasion-resistant polyamide. TRS high-performance sweeping system Main brush drive Front/rear drive - to the rear axle through a differential mechanism Separate drive for each rear wheel Robust laser-welded frame construction, extremely impact resistant Rotating guards made of polyethylene Ergonomically positioned buttons Collects sand and fine dust Easy to operate Exceptionally large surface area of the filter and debris container Quick change mechanism of rollers and side brushes Very maneuverable (turning radius - 1 m) Quiet operation Electric filter cleaning system Extremely easy access for service work Trouble-free chain transmission Very powerful motor Ability to clean textile surfaces (carpets, rugs, etc.) Approximately 50% larger cleaning area compared to a manually operated sweeper having the same sweeping width Categories: STOLZENBERG, Sweeping machines Electric drive - 24 V, 900 W TWS sweeping method - two brushes Sweeping width - main brush (mm) 600 Kledpfoud A Hkjx Agpju Width with 1 side brush (mm) 800 Width with 2 side brushes (mm) 1000 Chain transmission Brush drive yes Extraction yes Air flow rate (m³/h) 600 Trash container (l) 70 Filter surface area (m²) 3 Filter cleaning system electric Theoretical efficiency (m²/h) 6000 Practical output (approx. m²/h) approx. 70% of theoretical output = 4,200 Max. speed (km/h) 6 Max. surface slope (%) 20 Dimensions - L x B x H (mm) 1190 x 790 x 1089 Weight (kg) 160 ID: 905240967

Condition: good (used), TASKI Swingobot 2000 autonomous scrubber dryer Manufacturer: TASKI / Diversey Model: Swingobot 2000 Type: COR2000 Machine type: Autonomous scrubber dryer Condition: used, fully operational Operating hours: approx. 38 hours Serial number: 7524396000434 Operating voltage: 24 V DC Kodpfozd Eyuex Agpslu Power consumption: 1500 W Weight: 471 kg Working width: 700 mm Suction nozzle width: 900 mm Fresh water tank: 90 l Operating time: up to 4 hours Theoretical area performance: up to 1,260 m²/h Protection class: IPX3 Operation: autonomous or manual Navigation system: LIDAR and sensor system Touchscreen control panel Emergency stop switch Location: Teningen-Nimburg

Condition: used, 8 pneumatic cylinders, 3 heating elements, working width 2600 x 1900 mm. Location: Nattheim. Kedpfozd Hnmjx Agpjlu

Condition: used, Year of construction: 2002, machine/vehicle number: LA14, Used bottel washer dryer GAI - 3500 BPHTechnical Specifications & Performance DataThe Bottle Washer Dryer 5008 is a rotary carousel drying unit engineered for reliable bottle handling within a used bottling line or standalone drying station. Manufactured by Cimec, this second hand machine delivers consistent performance for beverage production and industrial packaging applications where efficient moisture removal is required before downstream labeling, capsule application, or case packing.Model: 5008Year of manufacture: 2002Production speed: up to 3,500 bottles per hourBottle formats (volumetric): Compatible with 0.5L and 0.75L bottle formatsBottle geometry: Cylindrical containersBottle diameter range: 60 mm to 115 mmDrying technology: Rotary carousel (hot air) with anti-condensation featuresPLC installed: NoDocumentation: Paper manuals and electrical schematics availableAdvanced Automation & Control SystemsThe 5008 emphasizes robust mechanical design with straightforward operator control, ideal for facilities prioritizing simplicity and ease of maintenance. While no PLC is installed, the machine’s hot-air drying system integrates anti-condensation management to improve drying effectiveness and reduce residual moisture on the bottle surface. Safety guarding and interlocks are typically part of this class of equipment, supporting safe operation within production environments. Quick mechanical adjustments facilitate format changes across the stated diameter range, helping minimize downtime between production runs.Production Line Integration CapabilitiesThis rotary bottle dryer can operate as a dedicated station or be integrated inline with rinsing, filling, capsuling, and labeling equipment. It is well suited for beverage production lines processing both PET and glass bottles in cylindrical formats. Its compact, carousel-based layout supports smooth infeed and discharge with standard conveyor systems. Format changes within 60–115 mm diameter allow flexibility across common bottle sizes, making it a practical fit for lines handling 0.5L and 0.75L formats.Machine Condition & Maintenance HistoryThe machine has undergone a partial refurbishment in 2025 and has been stopped for approximately one month. It is currently packed and covered, available for inspection. The presence of paper manuals and electrical documentation supports easier recommissioning and setup. Overall, the unit presents as a well-kept second hand component suitable for integration into a used bottling line or as a targeted retrofit in an existing beverage production facility.Operational Performance & VersatilityThe hot-air drying concept with anti-condensation control improves surface dryness prior to downstream operations such as label application or capsule fitting, thereby enhancing label adhesion and presentation. The rotary carousel design ensures consistent residence time and uniform air exposure around the container. Suitable for a broad range of cylindrical bottles, the 5008 supports both PET and glass handling and can complement production of win... Kedpfeyhbdljx Agpolu

Condition: good (used), 1 x Lavamac industrial washer extractor. Kledpfx Agszfllaspju Model AF240

Condition: good (used), 1 x Cherry tree 50 kg washer extractor. Kodjzfkyiepfx Agpelu

Condition: good (used), 1 x Lavamac washer extractor. Kedozfkpkjpfx Agpolu Model LH1200 Year 2009.

Year of construction: 2016, condition: good (used), 1 used hot water parts cleaning system Manufacturer: Bio Circle Type: HTW II 800 Year of manufacture: 2016 Material: Stainless steel Electrically powered rotating basket Effective and cost-efficient Overall width: 1175 mm Overall depth: 1145 mm Height with closed lid: 1380 mm (with exhaust bend) Height with open lid: 1780 mm Inner diameter of the mesh basket: 800 mm Max. usable height: 400 mm Max. payload: 350 kg Tank capacity for cleaning fluid: 150 liters Electrical connection: 6 kW Voltage: 400 volts Frequency: 50 Hz Flow rate of the cleaning pump: 4.8 m³/h Spray pressure: 2.5 bar Electric heating in the washing tank: 5.3 kW Treatment temperature: 10°C to 85°C Load capacity: 150 kg Fresh water connection: 1/2″ Drain valve: 1 1/4″ Weight: 330 kg Klodpfozb Iyasx Agpeu

Condition: used, New electric scrubber-dryer, floor cleaning machine, DAEWOO, type DAFL50A Year of manufacture 2025 – unused, from stock Theoretical area performance: 2000 m²/h Working width: 510 mm Cleaning brush: Ø 510 mm Brush speed: 175 rpm Suction nozzle width: 850 mm Tank volume, clean water: 50 liters Tank volume, dirty water: 50 liters Noise level: 66 dBA Climbing ability: 2% Battery voltage: 24 volts, 100 Ah - Battery charger, 24 volts - Battery, 24 volts, 100 Ah - One cleaning brush - Two separate tanks - No drive system; the machine is pushed manually, or the machine moves itself via the brush drive Klodpfx Aszcxmgsgpou Machine length: 1200 mm Machine width: 510 mm Suction nozzle width: 850 mm Machine height: 1350 mm Unladen weight: 160 kg New – original packaging – unused, from stock

Condition: like new (used), *3. COMMERCIAL OFFER SHEET - KARCHER B 90 R* --- *1. EQUIPMENT DESIGNATION* *Type*: Battery-powered, ride-on floor scrubber *Brand / Model*: KARCHER Professional B 90 R Bp Pack *Year*: Estimated 2012-2014 *Serial Number*: ..... *2. TECHNICAL SPECIFICATIONS* Item Detail Working width 90 cm, 2 disc brushes Performance 5400 m²/h Tanks Clean water 140 L / Dirty water 140 L Power supply NEW 6V batteries 06/2026 Operating time 3h30 to 4h Ksdpfjzbvrdsx Agpolu *3. GENERAL CONDITION & READINGS* Inspection point Reading Comment Hour meter 58 h Almost new condition Batteries New 06/2026 Invoice provided Brushes / Squeegee Good condition 80% remaining wear Operational test OK Suction, traction, and scrubbing validated

Condition: used, Year of construction: 2010, operating hours: 219 h, Field of application: Internal logistics General condition: average Technical condition: average Visual appearance: average Transport dimensions (LxWxH): 1,7x1x1,4 Production country: US Please contact Vink Machinery for more information Minuteman Powerboss Kedovc Ehgopfx Agpjlu SC2832E * 219 hours of operation * 80 cm scrubbing width * Separate charger * New scrub brushes * No batteries included

Condition: used, Year of construction: 2012, machine/vehicle number: LV45, Technical Summary and Application Scope – ATES Giorgia 6000 bphThe ATES Giorgia 8000 bph is a continuous-motion washing and rinsing system for glass bottles, suitable for both returnable and new bottles. It is designed for stand-alone use or seamless integration into existing or new bottling lines. Built primarily from AISI 304 stainless steel with plastic baskets and continuous-motion conveying, the machine ensures robust performance with industrial-grade safety protections.Main Technical DataType: Industrial glass bottle washer and rinser, suitable for recycled and new bottles.Nominal output capacity: up to 6,000 bottles/hour depending on bottle format, contamination level, and line configuration.Materials: AISI 304 stainless steel structure; plastic baskets; stainless-steel doors and inspection windows.Mechanical composition: Shelves, baskets for bottle housing, and automatic loading/unloading with push bars. Easy inspection access for maintenance.Water treatment: Hot-water washing with caustic detergent (soda) followed by multi-stage rinsing.Installed electrical power: approx. 20 kW.Electrical supply: 400 V, 3-phase, 50 Hz; auxiliaries 24 V; PLC/SCADA integration (Siemens, Omron, Allen-Bradley).Water consumption: 1.0–1.5 m³/h via 1″ G (BSPP) supply, minimum 1.5 bar.Drainage: integrated rinse and tank drainage via 2″ pipeline.Compressed air: 6 bar operating pressure; approx. 20 Nl/h; 1/4″ connection.Thermal energy: approx. 250,000 kcal/h (~291 kW) via dedicated heat exchanger, compatible with steam or hot water supply; typical wash temperature around 70 °C for caustic stage.Filtration: internal filtration plus 0.2 μm microfiltration for process water.Sanitation: cleaning and sanitization stages including pre-wash and rinse, with detergent and disinfectant dosing; thermal insulation of tanks and piping for energy efficiency.System Architecture and Process FlowReturnable bottle cycle (full washing and rinsing)Automatic loading into baskets via push bars.Pre-wash spray to remove dirt and label residues.Immersion in hot caustic bath to disintegrate adhesives and organic matter.High-pressure internal and external washing through jetting manifolds.Multiple recirculating rinses followed by a final rinse with clean water or potable/demineralized water.Continuous label and debris extraction with filtration to prevent clogging.New bottle cycle (rinsing only)Spray pre-wash.Pre-treatment with detergent solution. Klodpfx Ajxqmqzegpou

Condition: used, Year of construction: 2018, Basket diameter 1.100 mm Usable height 500 mm weight max. in kg 350 kg tank 250 l output 15,4 kW Operating temperature max. 75 °C Sporer PCS Aqua Jumbo Iso parts washer or automatic parts cleaning machine for the automatic cleaning and degreasing of workpieces using a heated, aqueous cleaning solution via a spray process. The machine operates as a top-loader with a rotating wash basket and is suitable for large and heavy components in workshops, maintenance, and industry. The Iso model features thermal insulation to reduce energy loss. Klodpfjzcga Iox Agpou The pumps are leaking and need to be overhauled or replaced.

Condition: used, Year of construction: 2016, operating hours: 12,000 h, functionality: fully functional, The last service by Asco was performed in December 2016 at 12,032 operating hours. Since then, the machine has only run for an additional 603 hours due to an investment in a brand new production line. The machine’s total operating time is 12,635 hours (12,032 h at last service + 603 h extra use). • The machine comes with complete documentation, including technical manuals and service reports. • Both the pump and the cylinder have been replaced. ASCO’s automatic dry ice machine produces slices of varying thicknesses and two pellet sizes (3mm and 16mm) at the push of a button. The dies for the different sizes are integrated and selectable via the touchscreen—manual changeover is not required. Theoretical output is up to 400 kg/h, depending on the type of product (block thickness or pellet size). According to the owner, the machine consistently produces at least 250 to 300 kg/h in practical use. New price: €160,000. Worldwide shipping available. Relevant keywords for search and sale: Cold Jet dry ice machine for sale, dry ice blaster for sale, industrial dry ice cleaning machine, CO2 cleaning equipment, Cold Jet Aero series, used Cold Jet, second-hand dry ice blasting machine, dry ice pelletizer, cryogenic cleaning, high-pressure dry ice blaster, refurbished dry ice blaster, 20 ft blasting hose, dry ice gun, venturi nozzle, Kärcher Ice Blaster, ASCO Jet, Cryoblaster, ICS, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion, ICEsonic, industrial cleaning equipment Europe, dry ice machine export, DrDryice. Ksdey R I Uqepfx Agpjlu Contact for more details or to arrange an inspection.

Condition: like new (used), Year of construction: 2019, operating hours: 1,450 h, functionality: fully functional, Dry Ice Dosing & Bagging System. Automated Production & Bagging System. Automatic Dosing & Packaging System for Dry Ice Pellets New price currently around €250,000 Description: Complete system for dosing and packaging dry ice pellets. Fully automated process with high capacity and reliability. Advantages: Klodpfjw Ttxfsx Agpsu Additional information about the bagging machine. System Dimensions: The entire system measures 6 meters in length, 3.20 meters in height, and approximately 1.20 meters in width. The round turntable (disc) has a diameter of 1.5 meters. The system does not need to be installed in a completely straight alignment. The system can be rotated 90 degrees in two sections, creating a U-shape. This allows the machine to be installed in more compact spaces without compromising functionality. The height of the system is fixed. Machine Output: Output capacity is approximately 500 kg per hour. Bag Dimensions and Weight: The bag sizes can be fully customized to your requirements. Options range from small bags of approximately 5 grams to larger bags of 20 kg or even 40 kg. Adjustments can be made flexibly to suit your production demands. Buffer Tank: The buffer tank has a capacity of 20 kg. Maintenance Costs: Average annual maintenance costs, excluding materials and call-out charges, are between €1,200 and €1,500 per year. Worldwide Shipping. Cold Jet Prime 600, Cold Jet Prime600, Cold Jet dry ice dosing & bagging system, dry ice dosing machine for sale, dry ice bagging machine for sale, dry ice production machine, dry ice production machine for sale, dry ice dosing & packaging system, automatic dry ice dosing machine, automatic dry ice bagging system, dry ice pellet production & packaging, dry ice packaging equipment, industrial dry ice production system, dry ice pellet production machine, dry ice pellet making equipment, dry ice pellet packing machine, pelletizer & bagging system, dry ice pelletizer bagger, cryogenic dry ice production equipment, CO2 dry ice production machine, dry ice manufacturing system, dry ice production & dosing system, used dry ice dosing machine, second-hand dry ice production machine, refurbished dry ice machine, dry ice supply system, high-capacity dry ice production system, automatic CO2 pellet bagger, liquid CO2 to dry ice converter, dry ice bag filling machine, dry ice packaging automation system, industrial packaging machine for dry ice, high output dry ice system, adjustable bag size dry ice, dry ice buffer tank system, 500 kg/h dry ice production, worldwide export dry ice machinery, industrial dry ice packaging, cold chain dry ice packaging equipment, food-grade dry ice packaging machine, logistics dry ice dosing & bagging, dry ice dosing & shipping solution, dry ice dosing system Netherlands, dry ice dosing system Noordwijkerhout, DrDryice, dry ice production equipment Europe, cryogenic pellet production systems, dry ice manufacturing equipment for sale, dry ice production line, dry ice pelletizer PR series, integrated dry ice dosing systems, industrial CO2 pellet production, dry ice automation system, dry ice bagging & dosing automation, high reliability dry ice machine. DrDryice

Condition: ready for operation (used), operating hours: 2,880 h, functionality: fully functional, DrDryice The C500 is an older model, but it has proven to be a strong, durable, and dependable workhorse. Built with robust industrial engineering, this machine continues to deliver consistent performance and is ideal for companies looking for low-investment dry ice pellet production. Machine operated for 2880 hours. • Includes 3 mm and 16 mm plates (dies) • Minimum production capacity of 100 kg/h • Solid, heavy-duty construction • Proven reliability Worldwide Shipping. Kjdpfxeyxxgae Agpjlu Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, die cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: like new (used), Year of construction: 2009, operating hours: 467 h, functionality: fully functional, Plow and play. Very low usage, fully equipped mobile dry ice production plant: Total operating time for the pelletizer is 467 hours. The last full service was performed in 2026. • Mobile, containerized manufacturing system • "Production HUB with Triventek PE80 pelletizer, 80 kg/h" (Denmark), built into a portable container with lighting. • ISO CO2 tank, 8m3, portable on a frame, manufacturer Wessington Cryogenics Ltd, England. • 3 pieces of thermo containers, 200 kg capacity each. New price: €250,000 Kedpjy R I Tmjfx Agpelu • All manufactured in 2009, but very little used. Mobile & Modular: Built directly into a 10-foot High Cube ISO shipping container, it can be easily transported to rugged or remote locations. Worldwide shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.