Used miter saws for sale (77)

Condition: used, Year of construction: 1996, weight of the machine ca. ca. 1500 kg 1707 connected load frequency 400 V 230 V frequency 50 Hz generator - rated current 8 A output 4 kw Nodpfjupmv Usx Aaxecl saw-blade dia. 400 mm ja

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1-APD018-000, cutting width (max.): 2,200 mm, type of input current: three-phase, total length: 1,850 mm, total height: 1,370 mm, total width: 3,150 mm, overall weight: 2,500 kg, number of previous owners: 1, input voltage: 400 V, mount diameter: 152 mm, pressure: 6 bar, power: 18 kW (24.47 HP), compressed air connection: 6 bar, Roll cutting and rewinding machine RSW2200T Nsdsx Eg Ucjpfx Aaxocl

Condition: good (used), Year of construction: 1993, Mitre saw, saw unit right left, double mitre saw, crosscut and mitre saw, double end tenoner Nsdpjtxkprefx Aaxocl -Manufacturer: Emmegi, Pressta Eisele, double mitre saw type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm -Saw units: 45° pivotable -Saw blade: Ø 500 mm -Cutting data 90°: Cutting height 350 mm Cutting width 160 mm -Cutting data 45°: Cutting height 260 mm Cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg

Condition: used, Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler -Double miter saw: Saw unit right and left -Saw unit: 45? pivotable -Motor: Bauknecht 2.5 kW / 2850 rpm Ncsdpfx Aaogy Dbdsxel -Saw blade: O 400 mm -Price/delivery: complete -Total dimensions: 1370/890/H710 mm -Total weight: 250 kg

Condition: excellent (used), Omga V 113 P double mitre saw for frames Ncjdpfeyaa Uysx Aaxel Double saw set at a 45-degree angle Saw blade diameter: 300 mm Saw blade bore diameter: 30 mm Two motors, each with 1.1 kW power Maximum cutting width: 70 mm Maximum cutting height: 75 mm Pneumatic material clamps

Condition: excellent (used), functionality: fully functional, saw blade diameter: 350 mm, cutting height (max.): 80 mm, cutting width (max.): 80 mm, Double mitre saw ALFAMACCHINE T350 CE Ncjdpfxsx U R Rcs Aaxol Double saw for cutting at 45° angles Blade diameter: 350 mm Blade bore: 30 mm Blade speed: 3000 rpm Motors: 2×1.5 kW Air requirement: 5-7 bar Cutting width: 15-80 mm Cutting height: 10-80 mm Machine dimensions: 320x70x152 cm

Condition: good (used), Table and mitre saw TGS 173 with sliding table - on mobile base cabinet with 2 drawers Ncodpfx Aex R Eadsaxsl - Adjustable feet not included

Condition: excellent (used), functionality: fully functional, Pneumatic stapler. - The automatic nailer pneumatically presses fastening elements onto the bottom of the mouldings - The clamping pad automatically adjusts to the height of the workpiece - Fastening elements are supplied on coils of 10,000 to 20,000 pieces (depending on size) - 200 to 300 complete frames per hour (depending on size) Njdpex U Dpfjfx Aaxjcl - Nailer type NR (two boxes of 12 mm fasteners included) - Overall dimensions approximately 96 x 61 x 122 cm and weight approximately 95 kg.

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: ZS 200 N / 2014/53/40, saw blade diameter: 520 mm, cutting height (max.): 200 mm, rotational speed (min.): 2,800 rpm, cutting length (max.): 420 mm, length stop: 7,000 mm, For sale: GRAULE ZS 200 N crosscut and mitre circular saw, equipped with control panel, motorized swivel and tilt adjustment, including roller conveyors (7000 mm and 4000 mm) with manual stop (with sight glass), as well as a chip extraction unit. The machine has been regularly maintained by a specialist company and is in very good condition. Nodpfoyannzsx Aaxecl

Condition: new, Year of construction: 2026, crosscut and miter saw type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake u. Automat. Star delta motor control cutting width at 90deg: 420 mm cutting width at 45deg: swivelled: 295 mm Cutting height at 90deg: 200 mm Nsdpfji Dfidsx Aaxocl Cutting height at 45deg tilted: 140 mm Saw can be tilted on one side up to approx. 25 degrees to acute angles and tilted flat to the left up to 30 degrees Machine stitched: approx. 250 kg Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Cut-to-length and mitre saw type: ZS 200 N - 5 KW motor with machine stand, Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automat. Star delta motor control Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: swiveled: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees inclined: 140 mm Saw can be swiveled on one side up to approx. 25 degrees to an acute angle and tilted flat to the left up to 30 degrees Carbide circular saw blade 520x4.0/2.8 x 50 mm 60 WZ neg. for wood RLH-ST60 6.0 mtr. measuring length, mounting side: left Cross-cut fence / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital dimension display, pneumatic clamping of stop slider, stop flap folds backwards, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 mtr. Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Powerful dark red LED display. Higher accuracy than the battery-powered crystal display RO-ST60 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm Diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connection piece Location: From stock 54634 Bitburg - immediately available - Picture: similar. Njdpfx Aask H Ic Usxecl Machine is still in original packaging

Condition: excellent (used), Sprossen punching machine 12 mm Used, in top condition Manufacturer: Schleicher Sprossen knife 12 mm Ncsdpfx Aew Hlztjaxsl Right extension table with stop slider Required space approx. 1100 mm x 600 mm x 1100 mm Weight approx. 65 kg Storage location: 54634 Bitburg, loaded free, unpacked Handover in as-inspected condition, without guarantee or warranty

Condition: good (used), Heavy-duty universal carpentry circular saw, carpentry universal circular saw, miter saw, crosscut and miter saw, joinery circular saw -Manufacturer: Schneider Carpentry Machines, CNC joinery circular saw with roller conveyor, laterally movable left/right Ncodpfx Aox Ityyeaxol -Type: SLS 28 -Circuit saw: for crosscuts, miter cuts, bevel cuts, rip cuts, -Circuit saw: for cutting valley rafters, eaves boards, chamfers, and wedge boards -Saw unit: swivels 30°, rotates 180° -Drive motor: 11 kW -Saw blade: Ø 750 mm -Cutting height: max. 280 mm at 90° -Cutting height: max. 140 mm at 30° -Cutting width: max. 550 mm -Roller conveyors: 5020/750/H970 mm / 2000/750/H970 mm 320 kg -Saw dimensions: 2400/2130/H1600 mm 984 kg -Total weight: 1304 kg

Condition: excellent (used), blade diameter 300mm Nodpfx Aaenr Hd Asxscl motor power 1,6HP - 1,16kW max cutting dimensions 100x135mm angle cutting +/- 45 degrees

Condition: good (used), Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Manufacturer: Kaltenbach, Double miter saw type DKL 500 -Cutting length: 245 to 4180 mm -Saw units: swivels 45° -Saw blade: Ø 490 mm -Accessories: incl. additional saw blades, see photos -Overall dimensions: 5130/1100/H1410 mm -Total weight: 1154 kg Ncsdjh U U S Rjpfx Aaxsl

Condition: good (used), Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left from Rapid DGL / BFA saw-drill-milling machine -Motor: Sky 3.0 kW / 2790 rpm Njdpfsgzc Iyox Aaxjcl -Saw unit: swivels 45° -Saw blade: Ø 410 mm -Price/Fee: complete -Overall dimensions: 1060/760/H680 mm -Total weight: 240 kg

Condition: good (used), Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left -Saw unit: swivels 45° -Motor: Bauknecht 2.5 kW / 2850 rpm Ncjdpegylq Iofx Aaxol -Saw blade: Ø 420 x 30 mm -Price/Fee: complete -Overall dimensions: 1200/800/H690 mm -Total weight: 234 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Circular saw in very good condition Ncedpfx Aajt Uk Rmjxol

Condition: excellent (used), functionality: fully functional, saw blade diameter: 350 mm, cutting height (max.): 90 mm, cutting width (max.): 165 mm, Equipment: saw blade guard, OMGA T50.350 Crosscut Mitre Saw Specification: Ncodpfx Aex S N D Neaxjl • Manufacturer: OMGA • Model: T50.350 • Blade diameter: 350 mm • Saw motor: 2.2 kW • Max dimensions of cut element at right angle: 90 x 165 mm (height x width) • Protective guards on the saw for operator safety • Extraction nozzle diameter: 80 mm • Cutting angle adjustment: +/- 45 degrees • Overall dimensions: 75 x 62 x 76 cm (length x width x height) Additional information: • The machine is in very good technical condition, ready for immediate use • The photos shown reflect the actual condition of the item for sale • Possibility to power up and test the device on site

Condition: excellent (used), functionality: fully functional, saw blade diameter: 350 mm, cutting height (max.): 110 mm, cutting width (max.): 155 mm, extraction nozzle diameter: 70 mm, Equipment: saw blade guard, Miter Chop Saw OMS FC 350 R Specification: • Manufacturer: OMS • Model: FC 350 R • Saw blade diameter: 350 mm • Saw motor power: 2.2 kW • Max dimensions of the workpiece at 90°: 110 x 155 mm (H x W) • Safety guards on the saw for operator protection • Motor brake • Extraction nozzle diameter: 70 mm • Cutting angle adjustment: +/- 45 degrees Nsdpfx Aox S Nxgsaxjcl • Overall dimensions: 75 x 85 x 70 cm (L x W x H) Additional information: • The machine is in very good technical condition, ready for immediate use • The photos show the actual condition of the item for sale • It is possible to switch on and inspect the machine on site

Condition: good (used), functionality: fully functional, saw blade diameter: 350 mm, cutting height (max.): 90 mm, cutting width (max.): 170 mm, Equipment: saw blade guard, OMGA T50.350 Crosscut Mitre Saw 2.2 kW Specification: • Manufacturer: OMGA • Model: T50.350 • Blade diameter: 350 mm • Saw motor: 2.2 kW • Maximum dimensions of workpiece at right angle: 90 x 170 mm (height x width) • Safety blade guards for operator protection • Integrated internal sawdust extraction • Mitre cutting adjustment +/- 45 degrees • Overall dimensions without tables: 650 x 70 x 160 cm (L x W x H) • 2 extension tables included, each 17 x 100 cm Additional information: • The machine is in good technical condition, ready for immediate use • The photos show the actual condition of the item offered for sale • On-site inspection and testing of the machine is possible Nodpfsx S Nt Dox Aaxecl

Condition: used, Striffler Type 2750-E double-cut miter saw for precise miter and cross-cut cuts in wood profiles, moldings, and frames. The machine is ideal for series production in window, door, and furniture construction thanks to two pneumatically pivoting saw units and electronic positioning. cutting length: about 2,200 mm miter angle: 45° – 90° workpiece: max. 50x70 mm Further data: See PDF Nodpfx Ajw D Dfxjaxjcl

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, saw blade diameter: 520 mm, type of input current: three-phase, total length: 1,750 mm, total height: 1,800 mm, total width: 1,030 mm, saw blade bore: 50 mm, input voltage: 400 V, ❇️ Graule ZS 200 N – Crosscut and Mitre Saw | Very Good Condition | Fully Functional | UVV Safety Inspected For sale on behalf of a client is a high-quality Graule ZS 200 N crosscut and mitre saw from a window manufacturing facility. The machine is in very good, well-maintained, and fully functional condition and has been regularly used until recently. Current UVV/safety inspection available (see photos). Viewing and function testing on site can be arranged at any time. ⸻ ❇️ Technical Specifications: • Manufacturer: Graule Maschinenbau GmbH, Aalen • Model: ZS 200 N • Machine type: Crosscut & Mitre Saw (for aluminium, wood, plastic) • Saw blade diameter: 520 mm • Bore: 50 mm • Swivel range: large, finely scaled mitre range • Drive: 400 V • Application area: Primarily for processing aluminium and profiles • Design: Heavy-duty industrial standard construction ⸻ ❇️ Features & Highlights • Very robust machine stand • Large dual-sided worktable (multiplex coated) • Pneumatic hold-down clamps • Extraction hood / extraction port • Digital measuring/length stop system (display mounted on top) • Precise swivelling mechanism with angle scale • Ideal for aluminium profiles in window manufacturing • Ready for immediate operation • Only original Graule circular saw blades permitted (manufacturer’s note) ⸻ ❇️ Condition • Very good, well-maintained, immediately ready for use • Fully functional • Well-kept appearance • Still in use • UVV safety inspected ⸻ ❇️ Sale & Processing • Invoice with VAT shown is possible • Delivery or transport available upon request and cost coverage • Location: 72229 Rohrdorf • On-site loading by overhead crane possible ⸻ ❇️ Price: Net asking price: €8,990 + VAT ⸻ ❇️ Dimensions: • Approx. D 175 cm x W 103 cm x H 180 cm ⸻ Nedpfx Aaox N Hxxsxscl ⚠️ Other accessories for the workshop and metalworking are also available in my other listings. ‼️ Please also take a look at my other items. It’s worth it!

Condition: used, Year of construction: 2004, 2 blades Automatic ascent Pneumatic pressers Adjustment stops Ncedjxzpwljpfx Aaxsl 380V

Condition: new, Year of construction: 2026, A700 Fully Automatic Mitre Solid Wood 9m Fully automatic cutting of large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. For every piece of aluminium you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new aluminium stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic optimiser mode with timber laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Frame and truss manufacture • Mitre timber structures manufacture • Bulk timber cutting • Furniture manufacture • Planters and boxes manufacture Model: A700 Njdpfsmdq I Ijx Aaxjcl Length: 9 m Material Length: 8580 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.