Decoiler straightening machine

SCHULER AHR 320-2

Condition: used, Year of construction: 2004, pressure 80 t stroke 16 - 63 mm no. of strokes 100 - 750 /min distance between columns 970 mm dayligth (stroke and adjustment up) 380 mm column travel -side 380 mm table surface area 940 x 910 mm hole in the table 770 x 190 mm table height over floor 1180 mm ram surface 940 x 510 mm ram adjustment 76 mm material width 203 mm material thickness - 6,0 mm feed length 0 - 120 mm power requirement 37,0 kW Isdjvuua Nopfx Ad Neht Weight 14,50 t dimensions of the machine ca. 2,7 x 1,7 x 3,6 m permitted for automatic mode according to the CE-Norm with infinitely variable drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK A noise enclosure can be offered optionally - price on request

Condition: used, Year of construction: 1998, machine/vehicle number: 10870, Press capacity: 50 ton Ram stroke adjustable: 16 - 51 mm Slide adjustment: 64 mm Free frontal opening L-R: 1100 mm Free lateral opening F-B: 250 mm Table surface area : 1080 x 650 mm Slide area: 980 x 420 mm Hole in table: 1060 x 200 mm Ihjdpfx Aouqd Abod Nst Number of strokes: 100 - 750 s.p.m. Required power: 22 kW Working hours machine: 16850 h Height over floor approx.: 2471 x 1278 x 3150 mm Weight of machine approx.: 9 ton Standard configuration BRUDERER precision roller feed BBV 205 / 120

Condition: used, Year of construction: 2006, machine/vehicle number: M 91317, Decoiler Coil weight: 5 ton Material width: 80 - 500 mm Coil exterior diameter: 1800 mm Expansion range: 508 mm Speed: 50 m / min Leveller / Straightener Material width : 50 - 500 mm Isdpfx Adeuqd Ude Njht Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 65 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 150 mm Material thickness: 1 - 8 mm Feeding speed: 50 m / min Feeding length: 0,1 - 9999,9 mm Standard configuration Coil loading unitStroke 500 mm Load capacity 5000 kg Material width max. 500 mm

Condition: good (used), Year of construction: 1986, operating hours: 10,000 h, power: 30 to (US) , app. 270kN bolster area: 30" x 21" = 762 x 533mm ram-area: 800 x 300mm strokes/min: 100...1400 1/min stroke (fixed): 1" = 25,4mm ram adjustement: 1,75" = 44,5mm Equiped by * Hydraulic clutch * Roll feeder Make: Sankyo Iedpfxonl Sns Ad Neht Type: Variax V70 Width: max. 100mm Only app. 10.000 working hours

Condition: ready for operation (used), Afrolmachine 5 ton Middenhoogte: 1300 mm Isdpewu Inrjfx Ad Nsht Spoellengte: max. 1100 mm Decoiler is verplaatsbaar, gemonteerd op chassis Laadwagen is vast gemonteerd op chassis

Condition: good (used), Year of construction: 2006, coil weight: 500 kg, Millutensil SLMD 500. Double decoiler / double rewinder. Capacity load: 500 kg x 2. Inner diameter min 350 mm max. 600 mm. Strip width up to 300 mm. Outer diameter max. 1600 mm. High frequency inverter Danfoss. Ihodpfx Adou A T Hze Not Sensor for loop control. Dimension 2000 mm x 2000 mm height 1800 mm. Made in Italy. More coilers, and presses on stock, Bruderer, Schaal, Mabu, Bihler, Schuler, Amada, San Gimignano, Kaiser, EBU...

Condition: good (used), functionality: fully functional, CAMU Pneumatic feeding and straightening line with decoiler: - CAMU SCI 530 F decoiler - CAMU RSC 500/7 straightener line - Max. diameter: 1500mm - Max. weight: 3000kg - DieTronic coil lubricator width 500 mm Mape ANP 510 gripper feeder - width: 510mm - Feed length: 500mm - Thickness: 0.7 – 3.7mm Ijdpevmn H Tsfx Ad Neht - Positioning accuracy: +/-0.05m

Condition: used, Year of construction: 1990, material width coil line 650 mm coil weight 2 x 3,5 t coil internal diameter 460 - 530 mm coil external diameter 1500 mm material thickness coil line 0,8 - 3,0 mm no. of straightening rolls 7 no. of rolls at in- and outlet 4 roll diameter 80 mm feed length 0 - 500 mm power requirement 10,0 kW weight 10,0 t dimensions of the coil line 8,8 x 4,0 x 2,55 m Straightening machine Dimeco, 1676 EV with inlet table and pre-shaping roll, hydraulic loading bridge Double decoiler Dimeco 2382 FFPS with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, coil loading device elektronic roll feed Microfeed 1140 E with DC-drive, pneumatic intermediate lifting of the rolls Ihsdpjvuudusfx Ad Nst can only be offered without putting into operation - video at seller's site before dismantling available

Condition: used, Year of construction: 1964, Technical details: Ihsdpfx Asu Nfibed Njt pressure: 125 t stroke: 28 mm number of strokes: 56-225 Hub / Min distance between columns: 1000 mm ram adjustment: 60 mm distance table/ram: 376 mm Table dimensions: B.950xT:720 mm passage opening in table: 400x130 mm height over floor: 1120 mm ram surface area: 920x540 mm mortise hole in ram: Dm 65 x 120 mm column travel -side: 250 mm total power requirement: 30 kW weight of the machine ca.: 15,5 t dimensions of machine: 3,1x1,34x3,6 m dimensions electric cabinet LxWxH: 0,64x0,22x1,2 m This press is a high-performance press for mass production /series production. - Contains left side a material feed via automatic feed (mechanic) and right side a waste cutter. Feed = 0-200mm, roll width =250mm Partial documentation as a copy available. Machine is not functional and is on sale as is! *