Coil line

Schuler AC-UHS

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Initial commissioning: 2000 Control system: Heidenhain TNC 430 M Nkjdpfxow Rl S Se Aaxjt Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ±110° C-axis: ±300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic Spindle freshly overhauled at the end of 2024! Linear axis drives Feed rate X, Y axis: up to 20 m/min Feed rate Z axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions & weights Machine footprint with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - The additional clamping table shown is not included in the scope of supply Condition of the machine Fully functional, in very good condition. Machine remains connected and is available immediately.

Year of construction: 2002, condition: ready for operation (used), With two machining modules, X-axis: -50 to 725mm, Y-axis: -200 to 300 / -250 to 250mm, rapid traverse X-, Y-, Z-axis: 18/12/30m/min, control: Siemens Sinumerik, temperature range: 5–40°C, power type/frequency: 3 PEN / 50Hz, rated voltage: AC 400V, control voltage: DC 24V, auxiliary voltage: AC 230V, connected load: 102kVA, rated current: 148A, rated current (fast): 148A, fuse (slow): 160A, length: 8000mm, width: 3000mm, height: 4000mm, weight: approx. 17t, operating hours: approx. 80,000h. The machine is fully functional, the ball screw drive (recirculating spindle) of the Z-axis was renewed in 2024 and it has been regularly maintained. Comes with documentation, control cabinet, hydraulic unit, filter elements, and chip conveyor. An on-site inspection is possible. Nsdpfx Ajwbuyzeaxekt

Condition: good (used), Year of construction: 2003, travel distance X-axis: 13,000 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 30,000 rpm, distance between stands: 6,500 mm, spindle nose: HSK A63, X-axis: 13.000 mm Y-axis: 4.500 mm Z-axis: 1.000 mm Distance between columns: 6.500 mm C-axis: 190º A-axis: 110º Nkodpfx Aastt I Sfoxjt Positioning speed XYZ: 15.000 mm/min. Positioning speed AC: 10 tpm CNC Controller: Siemens 840D Spindle nose: HSK A63 Spindle speed: 30.000 rpm Spindle power: 20 kW Toolchanger: 20 Pockets Torrestool tables: 16x X-axis: 11.500 mm Y-axis: 3.500 mm Z-axis: 750 mm Country of origin: Spain Machine size LxWxH: 19.000 x 11.000 x 6770 mm Machine weight: 70.000 kg The Torresmill Gantry is a 5-axis CNC milling and drilling machine, specially designed to work on aeronautical materials (Composite, Aluminum, Titanium, Steel, ...). The Torresmill gantry is perfectly combined with the Torrestool universal clamping device, guaranteeing flexibility and process time.

Condition: refurbished (used), ECCENTRIC PRESS SGP TYPE : PEZZ 500/1700/1000 PRESSURE : 500t DOWN TABLE DIMENSIONS: 1700x1000mm LENGTH OF STROKE: 20-153mm DISTANCE BETWEEN RAM -TABLE: Min 700mm , Max 800mm WEIGHT: 40.000 kgr MADE IN AUSTRIA Nkedpfx Ashqqnzsaxet

Year of construction: 1988, condition: as good as new (ex-display), machine/vehicle number: 1116/87, MANUFACTURER: ELTERMA/IPSEN MODEL: VDFC-413 DESCRIPTION: Vacuum tempering furnace YEAR OF PRODUCTION: 1988 STATUS: New unused, need revamping of the obsolete parts ( Cabinets ) Max Load Dimensions: 610x900x500mm Max Load Weight: 500 kg Working temperature: 150-750⁰C Nkjdjm E Tvhspfx Aaxjt Approximate warm-up time of the vacuum chamber at 550 ° C for 30 minutes

Condition: used, functionality: fully functional, machine/vehicle number: 7085, Used universal cylindrical grinding machine Manufacturer: WMW Model: SU 315 x 1000 mm Equipped with internal grinding attachment Maximum workpiece diameter: 315 mm Maximum grinding length: 1000 mm Grinding spindle speed: 1340 rpm Nkjdpfowl A H Dex Aaxjt Workpiece speed: 22–500 rpm Longitudinal table travel: 5–1680 mm Table feed rate: 0.05–5 m/min Maximum workpiece weight: 300 kg Connected load: 12.5 kW Machine weight approx.: 5.8 t

Condition: ready for operation (used), Year of construction: 1979, Two Bihler GRM-50 are available, year of manufacture: 1979/1987. Feed length: 320mm, max. strip width: 40mm, wire diameter range: 0.5-5mm, center punch stroke: 52mm, max. production speed: 132 pieces/min. Dimensions X/Y/Z: approx. 2600mm/1500mm/1900mm, weight: approx. 3500kg. Nksdpfx Astvar Ieaxst

Condition: excellent (used), Year of construction: 2010, swing diameter 1600 mm faceplate diameter 1400 mm Control Siemens Sinumerik 840D SL turning height 1245 mm max. table load 9000 kg table drive 60 kW torque - table 13400 Nm Table rpm 450 1/min speeds c-axis 0,004-5 1/min. feed range 18000 mm/min dimensions of the machine ca. 8,5 x 5,3 x 5,7 m weight of the machine ca. 47,4 t Nkedpfx Aajxylm Texet Crossbeam support: -Travel range X-axis: ± 950 mm Crossbeam stroke W-axis: 600 mm Ram : -Cross-section Ram: 250 x 250 mm -Plunging diameter: 340 mm -Travel Z-axis Ram: 1100 mm Drilling and milling device: - Distance between milling spindle and machine table 1245 mm - Tool holder SK 50 - Drive power 30 kW - Speed range 2000 rpm - Torque 1395 Nm Equipment/accessories: -16-40-fold pick-up magazine -Protective device -Various turning tool holders -Various SK50 tool holders and tools -Various clamping devices -Coolant device with filter -Chip conveyor -Documentation

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 426, empty load weight: 19,000 kg, total length: 6,120 mm, total width: 5,050 mm, total height: 3,700 mm, volledige CNC indexeerfreeskop (2x 2,5°) gereedschapswisselaar met 30 posities gekoelde deurspindel en 2 magneettafels : 1000 x 300 mm Longitudinal travel X-axe: 3600 mm Nkodpfxjxpkifo Aaxet Cross travel Y-axe: 1000 mm Travel Z-axe: 1600 mm Dimensions clamping space- table: 4100 x 900 mm Power on spindle: 22/29 kW Admission in millinghead (ISO): BT 50 Max speedrange: 1 > 2250 rpm

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 18355, Area: Measuring plate:7,38m (L) x 3,06m (B) x 0,63m (H) Required area (room):7,80m (L) x 8,15m (B) x 3,70m (H) Nedjuiyl Uepfx Aaxokt maschine data PRO T 1: -Zeiss Pro-T-Select Serial number: 181355 -Range: X7000, Y1600, Z2100 -System: Zeiss CSC with probe or optional Eagle Eye Navigator -Max. speed: axial < 150mm/s, 3D < 260mm/s tactile mode Software: Holos / Caligo (version 3.2.4 - 64Bit) maschine data PRO T 2: -Zeiss Pro-T-compact Serial number: 181354 -Range: X7000, Y1600, Z2100 -Sensor: Zeiss RDS-CAA without Eagle Eye option -Max. speed: axial < 150mm/s, 3D < 260mm/s tactile mode Software: Holos / Caligo (version 3.2.4 - 64Bit)