Plate rolling machines Sahinler H3R-HS-30-210, 3100x6mm 2016

Sahinler

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 180253, functionality: fully functional, pressing force: 150 t, stroke length: 340 mm, table width: 1,570 mm, Equipment: CE marking, TECHNICAL DETAILS Pressing force: 150 t Max. stroke: 340 mm Table width: 1,570 mm Adjustment height: 280 mm Adjustment width: 200 mm Height adjustment: 800 mm Ljdpsy Avvyefx Ah Njhf Adjustment speed: 5 mm/s Column gap (width): 1,570 mm MACHINE DETAILS Control: Conventional Dimensions & Weight Dimensions (L x W x H): 2,650 x 1,450 x 2,625 mm Transport weight: 2,500 kg Transport packages: 1 pc. EQUIPMENT CE marking

Year of construction: 2009, condition: good (used), machine/vehicle number: 120P1109, OFFER 21407 Mot. tank-boiler turning device with rail trolley Technical data: - Total payload driven + travelling unit 40000 kg. - payload per vessel device 20000 kg - workpiece diameter approx. 500 - 3500 mm - Centre distance of the support rollers adjustable via trapezoidal thread spindle - roller diameter 500 mm - roller width 150 mm Ledpfx Ahshcnhmo Nohf - driven unit with drive on both sides - infinitely variable rotational speed - manual remote control for Re- and Li.-run - drive 400 V - Both units are mounted on rail trolleys - space requirement with running unit approx. W 3800 x H 1150 x D 1350 mm - Space requirement with running unit approx. W 3600 x H 1150 x D 1350 mm - Weight attached unit approx. 2500 kg - Weight with running unit approx. 1800 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, Sahinler Hydraulic 4-Roll Plate Bending Machine Type 4RM 10-130 HRC Technical Data: Performance - Bending length: 1050 mm - Bending capacity without pre-bending Upper roll - diameter x 5: 6 mm - Bending capacity without pre-bending Upper roll - diameter x 5: 5 mm - Bending capacity with pre-bending Upper roll - diameter x 5: 4 mm Rollers - Central rollers diameter: 130 mm - Side rollers diameter: 110 mm - Working speed: 5 rpm Drive - Motor power: 4.5 kW Lsdoy Dq Exjpfx Ah Nehf Dimensions - Length: 2750 mm - Width: 900 mm - Height: 850 mm Weight: approx. 1100 kg - Steel welded construction - Machines are designed for thin aluminum, steel, and stainless steel sheets. - Adjustment of the side rollers is done via a gear transmission. - Upper roll drive is fitted with a reduction gearbox. - Manual drop-end bearing for easy sheet removal - Mobile control panel - Cone bending device

Condition: good (used), Year of construction: 1997, pressure 100 t stroke 300 mm table surface area 500 x 1520 mm column travel between the guideways 1520 mm dayligth 680 mm pressure max. 244 bar weight of tools max. 270 kg ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l voltage 400 V total power requirement 7.5 kW weight of the machine ca. 2700 kg Ledpfx Ahjy Dh Nzj Nohf dimensions of the machine ca. 2630 x 1000 x 2350 mm current new price approx. 18.000 euros special price on request according to previous owner rarely in use Equipment: - robust electro-hydraulic workshop/bending press * left right guided - with fixed working cylinder - Pressing depth adjustable by cams - Height-adjustable work table - 2x locking bolts for table fixation - 3x directional control valve supply-empty-return - Stepless adjustment of working pressure - 1x freely movable 2-hand operation - Original operating instructions

Year of construction: 1978, condition: used, pressure 100 t throat 380 mm stroke 400 mm power capacity 22 kW Lodpfelp U Dpox Ah Njhf dayligth 600 mm ram surface 600x500 mm table surface area 720x600 mm weight of the machine ca. 9 t

Condition: new, Year of construction: 2026, width of the strips 50.0 mm band length 940 mm band speed 3.0 - 22 m/min turning speeds 1450 U/min Lhsdpfxexaaxqs Ah Nof tube diameter 16.0 - 114 mm radius 180 ° total power requirement 4.75 kW weight of the machine ca. 265 kg range L-W-H 1000 x 750 x 1300 mm Furnishing: - stationary pipe belt grinders - Automatic material feed with separate drive motor - Replacement sanding belts - Stepless speed adjustment - Manual adjustment of tube tension - Polish bent pipes up to 180" (angle). - Manual work possible without feed - CE mark / declaration of conformity

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 81500 € 1540.35 € 8 mm 5 mm 80 mm 10 mm 4500 mm Lhodpsyq Svkjfx Ah Njf 720 mm 95 (R 80) / 35 (R 25) mm 11 kW 4900 mm 1700 mm 2700 mm 4550 kg incl. flanging rolls for mild steel (R25) incl. cutting blade top and lower roll driven by hydromotor and plantary gear box possible to flange both, flat and crowned bottoms hydraulically adjustable bottom height cutting and flanging on the same head lateral support rolls operator panel with touch screen Optional devices as fix or variable angle japanese hat attachement, rolls for stainless steel or high speed, small diameter attachement... on request

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: MG, controller model: 4-AXIS, number of rollers: 4, roller (bottom) diameter: 245 mm, roller (top) diameter: 265 mm, side roll diameter: 185 mm, roller diameter: 280 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 700 mm, sheet thickness (max.): 14 mm, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 10 mm, overall weight: 7,500 kg, total length: 4,200 mm, total width: 1,500 mm, total height: 1,600 mm, power: 18 kW (24.47 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 3, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4roll plate bending machine 2500 X 12 mm Ljdpfxjxw S Eqs Ah Njhf with central support hydraulic for large diameters and side arm plate support Capacity plate width 2500 mm Plate thickness 12 mm Prebend 10 mm Upper roll 265 mm Lower rolls 245 mm Surface useful on rolls 2550 mm Power supply 380/50 Electric motor 15 Kw on hydraulic unit Configuration Hardened rolls very high surface resistance Conical bending attachment Digital position readout of the rollers Safety and emergency installed per norms Hydraulic rolls power driven with planetary gear unit Hydraulic motion of rollers individual with dual initial pre-pinch Open front drop-end hydraulic to unload the closed shells Central support vertical hydraulic operated for large diameters Side arm operated hydraulic support Total weight of the machine 7500 Kg machine layout 4200X1500 X H1600 mm

Condition: used, total length: 1,000 mm, total width: 750 mm, total height: 1,400 mm, Empty weight: 400 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 1.5 - Shaft diameter [mm]: 50 - Moment of resistance [cm³]: 6 Lodjypk Ebjpfx Ah Nohf - Top roll diameter [mm]: 50 - Bottom roll diameter [mm]: 50 - Capacity diameter round [mm]: 35 - Transport dimensions: 1000mm x 750mm x 1400mm (l x w x h) - Transport weight [kg]: 400kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2003, total length: 3,230 mm, total width: 1,150 mm, total height: 1,120 mm, Empty weight: 1.400 kg Price: On request Lhsdjx Tuy Eepfx Ah Nsf - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 220281 - Drive system: Conventional - Drive: Mechanical - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 2.2 - Max. sheet thickness [mm]: 2 - Max. prebending thickness [mm]: 2 - Max. working width [mm]: 2050 - Top roll diameter [mm]: 110 - Bottom roll diameter [mm]: 110 - Bending speed [mm/min]: 3 - Transport dimensions: 3230mm x 1150mm x 1120mm (l x w x h) - Transport weight [kg]: 1400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Single-column hydraulic press, straightening press, punching frame ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine. No. 317 / 690 Year of construction approx. 1986 Compressive force 150 ton. throat 125 mm ram stroke 35 mm Table size 280 x 210 mm Plunger surface Ø 125 mm Installation height (ram to table) max. 265 mm Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit Lhedpfsd Swtasx Ah Nsf - Plunger surface with 4 M16 threads and 20 mm guide groove, central centering hole Ø 15 mm - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg Good condition

Condition: used, Year of construction: 2017, total length: 1,500 mm, total width: 900 mm, total height: 1,700 mm, Empty weight: 1.400 kg Steel round: 40mm Steel flat: 200x20mm / 300x15mm Notching + Punching + cutting - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 155976 - Drive system: Conventional - Punching force [ton]: 60 - Round bar cutting capacity [mm]: 40 - Motor power: 4.0kW - Transport dimensions: 1500mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 1400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Lhjdpowraazsfx Ah Nof VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2001, total length: 1,200 mm, total width: 800 mm, total height: 1,700 mm, Empty weight: 500 kg 3 mech. driven rolls (brake motor) hardened shafts top roll hydraulic adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 371 - Drive system: Conventional - Vertical/Horizontal: Horizontal and vertical - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 1.1 - Shaft diameter [mm]: 50 - Transport dimensions: 1200mm x 800mm x 1700mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Lhodewu Tnkspfx Ah Nef Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2002, fuel type: gas, Number of working hours 3184 h weight max. 8 t Ljdpfswx R T Ejx Ah Njhf weight of the machine ca. 13400 kg

Condition: excellent (used), Year of construction: 2017, 1 used, very good hydraulic 5-station combined high-performance profile steel shear Technical Data: Punching Station Punching force: 45 t Cutting capacity (steel 400 N/mm²): Ø 22 x 15 mm, Ø 38 x 8 mm Throat depth: 175 mm Max. stroke length: 50 mm Strokes per minute: 20 Working height: 955 mm Notching Station Max. material thickness: 8 mm Max. notch width: 35 mm Max. notch depth: 75 mm V-notch tools: 100 x 100 x 8 mm Flat Bar Shear Material width x thickness max.: 200 x 15 mm / 300 x 12 mm Blade length: 316 mm Miter cut 45° leg length x thickness: 80 x 10 mm Working height: 955 mm Bar Steel Shear Capacity round material: 30 mm Square material: 25 mm Angle Steel Shear Cutting capacity 90° L-profile: 100 x 100 x 10 mm Cutting capacity 45° L-profile: 70 x 6 mm Cutting capacity U-I profile (accessory): 80 x 45 mm Lhsdpoxz Dn Ejfx Ah Nof Cutting capacity T-profile (accessory): 40 x 5 mm Working height: 1140 mm Drive motor output: 4 kW Machine dimensions (approx.): 1500 x 950 x 1680 mm Machine weight (approx.): 1400 kg Accessories / Special Features: • Punching station, flat bar shear, angle steel shear, profile steel shear, notching station • Infinitely variable stroke adjustment • Heavy and robust welded construction • Powerful 400 Volt motor • Jog mode • Triangular notching station / V-notch tool • Equipped with MUBEA holder for punches No. 1, No. 2 and No. 3 as well as dies No. 30, No. 45 and No. 60; optional use of punch and die No. 4 and No. 80 possible • Punch holder with bayonet lock • Advantages of punching compared to drilling: - Significant time savings – fast cycle times - No chips - No coolant required • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany