Plate rolling machine

Roundo PS 340

Condition: used, Roundo PS340 3000 mm Hydraulic Double-Pinch Plate Bending Rolls Manufacturer: Roundo AB Model: PS340 Year: 1983 Country of manufacture: Sweden Type: Hydraulic three-roll double-pinch plate bending rolls Dsdozuzpyspfx Abtswb Capacity Maximum working length: 3,000 mm Pre-bending capacity: approximately 12 mm mild steel aximum rolling capacity: approximately 18–23 mm mild steel, depending upon finished diameter Standard upper-roll diameter: 340 mm Plate capacities based upon mild steel of approximately 270 N/mm² yield strength Minimum rolling diameter: approximately 1.1–1.4 times the upper-roll diameter, depending upon material thickness Remaining straight edge after pre-bending: approximately 1.5–2 times plate thickness Features Hydraulic double-pinch design Both lower rolls independently hydraulically adjustable Pre-bending of both ends without removing and reversing the plate Hydraulic rotation of all three rolls Infinitely variable rolling speed Hydraulic powered drop end Portable pendant control Front safety trip bar Heavy-duty fabricated and stress-relieved frame Forged and crowned steel rolls Rolls mounted in heavy-duty roller bearings Suitable for cylindrical and conical bending Approximate machine weight: 14,000–15,000 kg, subject to confirmation Approximate main motor: 22 kW, subject to data-plate confirmation

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 3roll 3500x140 mm prepinch, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: MG, controller model: MG, number of rollers: 3, roller (bottom) diameter: 880 mm, roller (top) diameter: 950 mm, side roll diameter: 880 mm, roller length: 3,550 mm, working width: 3,500 mm, working height: 3,950 mm, sheet thickness (max.): 140 mm, sheet thickness steel (max.): 175 mm, overall weight: 200,000 kg, total length: 8,800 mm, total width: 5,100 mm, total height: 5,775 mm, power: 200 kW (271.92 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Hydraulic Plate Bending machine planetary pinch pyramid with prebend. model MG35140V 3 roll capacity 3500x140 mm The machine was overhauled in 2024, Capacity : Plate width mm. 3500 Plate thickness mm. 140 Capacity chart in enclosed Tech data: -3 rolls driven hydraulic motorized with axial gear unit on each roll independent -Synchronized hydraulic rotation of the 3 rolls with variable speed. -Planetary design with pre-pinch fully hydraulic -Conical plate bending with hardened contrast pad -Digital position readouts of the bending rolls -Rolls installed on bearings double crown heavy duty -Overload safety hydraulic operation protection of the 3 rolls -High pressure hydraulic power pack with multi-pumps oil feed -Centralized control panel electric on wheels with joysticks and digital readouts -Emergency stop with safety system around the machine working area Rolls surface length mm. 3550 Top roll mm. 950 Side rolls mm. 880 Electric power on hydraulic unit Hp 100 + Hp 100 Voltage 380 Vac / 50 Hz Configuration & accessories installed with the machine -Hardened surface of the 3 rolls -Conical plate bending attachment , rolls tilt with contrast roller type. -Centralized operator panel with directional joysticks electric. -Digital position readout of the bending rolls. Dwedpfx Aboyzim Asteb -Emergency and safety installations, certified CE -User manuals and instruction books in English -Dimension see layout drw in enclosed

Condition: good (used), Year of construction: 1998, control type: NC control, number of rollers: 4, roller (bottom) diameter: 540 mm, roller (top) diameter: 560 mm, side roll diameter: 420 mm, roller diameter: 440 mm, roller length: 3,100 mm, overall weight: 45,000 kg, total length: 8,700 mm, total width: 2,900 mm, total height: 3,075 mm, power: 81 kW (110.13 HP), 4 roll plate bender HAEUSLER - VRM-hy MACH-ID 9638 Make: HAEUSLER Type: VRM-hy Year: 1998 Dwedpfx Abezbqquotsb Smallest bending diameter 640 mm Pressing force against upper roll 5800 kN Conical bending attachment Central lubrication Equipped for change rolls Rolling width: 3100mm Rolling thickness 3x toproll Ø:50mm Rolling thickness 5x toproll Ø:60mm Rolling thickness prebending: 40mm Top Roll Ø: 560+440mm Bottom Roll Ø: 540mm Side roll Ø: 420mm Number of rolls: 4 Rolling speed: 0-6 Adjustiment lower roll: 0 - 200mm/min. Adjustment side rolls: 0 - 500mm/min. Number of driven rolls: 2 Power: 81kW Length: 8700mm Width: 2900mm Height: 3075mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1979, Single column vertical turning lathe BERTHIEZ TM500 SP Manufacturer: Berthiez (France) Model: TM500 SP Year of manufacture: 1979 Dwodpfjx A U Rajx Abteb Main technical data: Table diameter: 6300 mm Maximum turning diameter: 15000 mm Maximum usable height: 4000 mm Arm travel: 3600 mm Main motor power: 100KW Maximum allowable load on faceplate: 80 t Ram size: 360x360 mm Machine weight: approx. 230 tons The machine is capable of both turning and milling operations. Do not hesitate to contact us for any additional information.

Condition: ready for operation (used), 1 x Davi round edge rolling machine / plate rolling machine / iron four-roll bending machine / 4-roll machine (English: Davi 4-roller bending machine) 4 rolls, 3.6 m x 95 mm thick. Dedpfx Abeymnzbotjwb Video available via WhatsApp/Messenger/Viber. Inspection welcome near D-24983 Handewitt. Year of manufacture 2009 - in operation since 2010. More information available upon request.

Condition: used, Year of construction: 1965, faceplate diameter 3500 mm swing diameter 4000 mm turning height 3150 mm slide adjustment 1700 mm table load 25 t digital readout Heidenhain Rest 2 total power requirement 90 kW weight of the machine ca. 95 t No. 6671024 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Dodpeyqtbusfx Abtowb apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Herkules WS1100 x 7000 CNC roll grinder (re-manufactured by Metex - Year 2011) Model WS1100 x 7000 18 ton capacity 1100mm swing 7000mm between centres Single saddle 700mm chuck Lismar roll inspection Waste conveyor Siemens Sinumerik 840 DSL controls Dwjdpfxsy U Hc Is Abtsb Safety fence

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, Vertical turning lathe with a 2,200 mm table diameter and an approx. 2,500 mm swing diameter. The base machine is from the Chinese manufacturer QQHR (well-known manufacturer). The entire electrical system, including the main motor, servo drives, control cabinet, and PLC, was completely renewed and professionally overhauled by Paulmann (Germany) in 2017. Dwedpfx Aeycgxkobtjb

Condition: used, Control system: Siemens 3-T Dsdpfx Aszl D Rhsbtswb Faceplate: 1500 mm Max. turning diameter: 1800 mm Max. turning height: 600 mm X-axis travel: 1995 mm Z-axis travel: 750 mm Faceplate speed: 260 RPM Main motor: 66 kW Milling motor: 31 kW Milling spindle speed: 3000 RPM Tool changer: 26 positions Machine is disassembled. Many tools and spare parts included.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, turning diameter over cross slide: 3,300 mm, turning diameter: 3,300 mm, spindle speed (max.): 92 rpm, spindle speed (min.): 92 rpm, travel distance X-axis: 2,000 mm, travel distance Z-axis: 1,200 mm, spindle motor power: 60,000 W, rapid traverse Z-axis: 6 m/min, rotational speed (min.): 92 rpm, rotational speed (max.): 92 rpm, total height: 2,330 mm, total width: 6,282 mm, feed length Z-axis: 1,200 mm, workpiece weight (max.): 35,000 kg, overall weight: 50,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, CNC vertical lathe SC 33 CNC MS Year of manufacture: 1995 Condition: used, fully functional Technical specifications: Maximum turning diameter: 3300 mm Maximum workpiece height: 2300 mm CNC control system Condition: functional, live Video available on request. *The machine is in very good condition, fully functional, live and available for inspection and testing. Dwedpfxoyzgtms Abteb