ROLL FORMING MACHINE

ROLLFORMING MACHINE No1

Condition: used, SANDWICH PANEL LINE FOR DOORS AND WALLS : 610mm width Made by METECO This sandwich panel production line is designed to manufacture doors & walls panels up to 610mm with an annual capacity of 1.500.000 m panel/year. MAIN PRODUCTION DATA Width: 500 - 610 mm Thickness: 40 - 80 mm Capacity: 1.500.000 m panel/year TECHNICAL SPECIFICATIONS Line speed: 12 m/min Maximum weight of reels that can be used: 10 Ton Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum thickness of producible panels: 80 mm Power supply: 400 V Frequency: 50 Hz Ijdpfx Ajvtpcijd Nstb SCOPE OF SUPPLY 1. Upper sheet metal treatment section - 10 T upper unwinder with coil carriage - Pinch-Roll and roller passage - Upper reel steel frame - Polyethylene film applicator - Embossing machine for texture pattern - Press for decoration pattern - Profiling machine with upper rollers (12 stands) - Steel upper frame for profiling machine - Upper sheet guide 2. Lower sheet treatment section - Lower 10 T double unwinder with reel carriage - Polyethylene film applicator - Corona treatment machine - Embossing machine - Lower roller forming machine (12 stands) - Rollway - Operator desk for entry line 3. Panel forming section - Hot air preheating oven - Sheet guiding unit - Steel reinforcement machine - High-pressure foaming plant - Foaming portal - Foaming booth - Side sealing system and tape applicator - Double press conveyor - Double belt heating system - Double belt press - Outfeed roller conveyor - Sawing machine for cutting - Soundproof cabin - Dust extraction unit - Operator Control desk 4. Stackable section - Automatic panel tilter - Stackable conveyor - Extraction conveyor - Packaging section - Styrofoam spacer feeding system - Infeed conveyor - Packaging machine - Extraction conveyor - Wrapping machine 5. Panel production equipment - Top roller forming tools - Bottom roll forming tools 6. List of additional machines - Container station for polyol, isocyanate and additives - Pentane tank and accessories Width: 500 - 610 mm Thickness: 40 - 80 mm Line speed: 12 m/min Maximum weight of reels that can be used: 10 Ton Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum thickness of producible panels: 80 mm Power supply: 400 V Frequency: 50 Hz Capacity: 1.500.000 m panel/year

Condition: used, Year of construction: 2011, functionality: fully functional, working height: 2,000 mm, The line for 2 x 2.5 m (60 mm package thickness) consists of the following machines: LV-25/20 VSA Lisec I.G. Manufacturing Line (without Automated Super Spacer VSA + SSV printer) (or can be sold with super space station VAS and SSV printer) 2000x2500mm(78 "x98") 60mm thickness max 1020 VHW 20/8 washer 1030 RSV 1060 NLMD turning station 1070 NWLD-25/20 Turning Station / Rotating inclination changer with measuring unit 1080 FPS-25/20U2 gas press / surface press with gas filling bar 1090 RTVB-32/20ST 1100 APKV-3/20 cork applicator / spacer cork 1110 VFL-1/20D Sealing robot Incl. shapes + triple glass 2x 1120 DOS-1PUD Mixing incl. 2 x 200L + Hardener press 200l pasty 1125 KSE 1130 Safety fence Technical data: Min dimension : 350 x 180 mm Max dimension : 2000 x 2500 mm Total thickness ISO: 12 to 60 mm Glass thickness: 3 to 15 mm SDR: 12 to 18 mm Level: not possible, step nozzle is missing Georgian Bars: No Gas type: Argon Models: according to model catalog LIsec radius limit 250 mm Sealant: PU Technical data: Min dimension : 350 x 180 mm Max dimension: 2000 x 2500 mm Total thickness ISO: 12 to 60 mm Glass thickness: 3 to 15 mm SDR: 12 to 18 mm Step: not possible, step nozzle missing Sprouts: No Gas type: Argon Models: according to the LIsec model catalog radius limitation 250 mm The line for 2 x 2.5 m (60 mm package thickness) consists of the following machines: LV-25/20 VSA Lisec I.G. Manufacturing Line (without Automated Super Spacer VSA + SSV printer) (or can be sold with super space station VAS and SSV printer) Itodpfxjrr Sy As Ad Nsb 2000 x 2500 mm(78 "x 98") 60 mm thickness max 1020 VHW 20/8 washer 1030 RSV 1060 NLMD turning station 1070 NWLD-25/20 Turning Station / Drehbarer Neigungswechsler with messeinheit 1080 FPS-25/20U2 gas press / Surface press with gas filling bar 1090 RTVB-32/20ST 1100 APKV-3/20 Korckapplicator / Spacer cork 1110 VFL-1/20D Sealing robot IncL. Shapes + Tripple glass 2x 1120 DOS-1PUD Mixing inkcl. 2 x 200L + Harderner press 200l pasty 1125 KSE 1130 Safety fence Technical data: Min dimension: 350 x 180 mm Max dimension: 2000 x 2500 mm Total thickness ISO: 12 to 60 mm Glass thickness: 3 to 15 mm SZR: 12 to 18 mm Level: not possible, step nozzle is missing Gorgian Bars : No Gas type: Argon Models: according to model catalog LIsec radius limit 250 mm Sealant: PU Technical data: Min. dimensions: 350 x 180 mm Max. dimensions: 2000 x 2500 mm Total ISO thickness: 12 to 60 mm Glass thickness: 3 to 15 mm SZR: 12 to 18 mm Step: not possible, step nozzle missing Georgian bars: No Gas type: Argon Models: according to model catalog LIsec radius limitation 250 mm Sealant: PU

Condition: good (used), Year of construction: 2014, Coffee Cartridge Filling and Packaging Machine Itodpfx Aoucf S Tod Nob Complete and in good working condition Overhead hopper feed. Automatic online depositor Speed 300 packs / hour Complete with Simens Touch Screen Controller Hot melt carton gluer

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll Itjdpfx Adjtiy Nts Neb 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: ready for operation (used), total width: 3,000 mm, total height: 5,350 mm, total length: 15,000 mm, empty load weight: 20,000 kg, Rollenbaan type G met Titan straalwielen Voor profielen, platen, rollen, buizen... maximale ingangsbreedte: 1100 mm maximale instaphoogte: 550 mm 4 turbines, elk 11 kW werksnelheid: 1,4 2,4 m/min Totaal vermogen: 62 kW Wordt op de vloer geïnstalleerd, geen fundering nodig! Itjdpewikatjfx Ad Njb Inclusief een grote keuze aan nieuwe reserveonderdelen ter waarde van meer dan 80.000€!

Condition: good (used), functionality: fully functional, year of last overhaul: 2023, EN: For sale a complete and efficient line for profiling steel sheet from tape, e.g. Magnelis, into any profiles, e.g. type C, used in photovoltaic installations and farms, construction of steel halls, shelters as well as for furniture production, etc. The line with the unwinder is located in a heated hall in almost laboratory conditions, for the buyer the possibility of starting it up before purchase, I have contacts to companies that supply sets of profiling rollers for specific profiles as well as to companies dealing with the modernization of such machines in terms of its expansion, etc. Isdpfxju A U Uts Ad Netb

Condition: used, Press system : Continuous / Calender Major suppliers : Bison / Berstorff Design capacity : 160 m³/day Capacity achieved approx. : 200 m³/day Effective working time : 23 h/day Reference thickness : 3,2 mm Max. gross board width : 2500 mm Max. net board length : 2440 mm Max. net board width : Unlimit Min. net board width : 1220 mm (splitting) Min. board thickness : 2,0 mm Max. board thickness : 10 mm Electric system : 380 V, 50 Hz Year of manufacture : 1985 Itedpfx Aeul H Nmsd Neb Major upgrades : 2007-2009, 2016 Operated until : May 2018

Condition: good (used), Year of construction: 1994, Fillerblock, make Nagema, type: Varifill 40/10K/10PP, for 12.000 bph, with 40 filling valves, with 10-head crown capper and 10-head screw sealer (for MCA 28 caps), with double pre-evac, runs on 0,33 lt Longneck- and 0,5 lt NRW-bottles, direction: left->right, Siemens S5 control, built 1994 Iodpfx Aon D Hm Sod Netb L: 4.000 mm, W: 2.700 mm, H: 2.800 mm

Condition: ready for operation (used), De uitrusting bestaat uit: 1 - decoilertoren met 4 decoilers (AG 3000 a) capaciteit per decoiler: 3 ton armlengte: 1350 mm maximale snelheid: 25 m/min frequentiegestuurd 2 - spoelselector (MT-4 1250) min: 150 mm maximale snelheid: 25 m/min frequentiegestuurd 3 - richtunit (RM-4 1250) min: 150 mm maximale snelheid: 25 m/min frequentiegestuurd 4 - snij-eenheid (TS 1250 + KST-2) min: 150 mm maximale snelheid: 25 m/min frequentiegestuurd Isdoxqh Saopfx Ad Nstb 5 - Schechtl-schaar voor op maat knippen met Siemens Touch CNC-besturing 1250 x 2 mm

Year of construction: 2025, condition: new, The RS-9 shredder has been specially designed for effective processing of various types of papers, taking into account the specifications of the punching machine it will cooperate with. The shredder enables the quick and safe shredding of paper directly received from the die-cutting machine for easy transport via a conveyor system to the baler. Our machine is not only easy to operate but also economical to maintain. It features advanced Siemens control that protects against overload. Additionally, the frequency converter ensures smooth start-up and precise motor control. We also design waste disposal systems from multiple punching machines to one shredder, allowing for fast and maintenance-free material packing into a baler. Iedpoiklxbsfx Ad Notb Feel free to contact us.