Rubber injection press

REP H 47Y10

Condition: like new (used), Year of construction: 2006, functionality: fully functional, Progressive Press SACMA SP260 5 Dies – Like new – Perfect working condition Available for any test at HBR srl. Completely overhauled Technical information: Number of dies: 5 Nedpfswar Efex Amuelc Heading tonnage: 800 kN Max cutoff diameter at 500N/mm²: 11.5 mm Max cutoff length: 85 mm Max kickout stroke (die): 65 mm Max kickout stroke (punch): 20 mm Speed: 275 pcs/min Power of main motor: 30 kW Die diameter: 54 mm Die length: 90 mm Punch diameter: 45 mm Net weight: 11,300 kg Gross weight: 13,000 kg We look forward to welcoming you at HBR srl in Calolziocorte (LC)

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, We are selling this lathe. It is connected and can be tested under power. The machine comes with accessories. Turning diameter: 2,000 mm. Turning length: 10,000 mm. Maximum workpiece weight: 60,000 kg. Machining diameter: 2,000 mm. A video of the machine can be sent via WhatsApp. Nljdpfx Asxwmbmsmusc

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø 1040 mm Swing over cross slide Ø 710 mm Swing in the gap Ø 1580 mm DBC Turning Length 3000/4500 mm Gap length 1500 mm Spindle bore 160 mm Spindle power 40 kW Bed width 800 mm Spindle taper 6 Mk Nlsdextbf Eepfx Amusc Workpiece weight 3500 Speeds / ranges 800 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 10000 mm/min. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2019, turning length: 700 mm, spindle bore: 76 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 720 mm, Twin spindle construction Twin turret configuration with Y Axis (Y-Axis Cutting complex shaped work piece) Build in Spindle motor High Rigidity BMT Turret Full C-Axis 360.000 Slant bed construction 45 Gr Please note Pictures is example not orginal picture ! Max. turning Ø: 290mm X-Axis: 165/195mm Y-Axis: 100mm Z-Axis: 700/720mm B Axis: 668° Spindle bore: 76mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds: 5000Rpm Subspindle bore: 76mm Subspindle power: 22kW ATC / revolver: 12 Speed live tools: 5000Rpm Nlsdpfx Amex I Nikjujc Positions lower revolver:12 Speed live tools: 5000Rpm Power live tools: 6kW Chip conveyor: Yes Tool eye: Yes Length: 3800mm Width: 2000mm Height: 2100mm Weight: 8500kg

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, grinding wheel diameter: 500 mm, total width: 2,300 mm, total length: 6,730 mm, total height: 1,800 mm, grinding diameter: 320 mm, workpiece weight between centers: 250 g, grinding wheel width: 80 mm, spindle speed (max.): 1,800 rpm, feed length X-axis: 350 mm, feed length Z-axis: 1,550 mm, Good morning, We have to offer a six months old CNC SWG32 x 1500 CNC machine with SIEMENS SINUMERIC 828D sL control (after a complete revitalization of TOS HOSTIVAR BUB32 machine) The machine is still in Lease at ING Lease. The machine has already been partially repaid, our company does not want to recover the repaid installments. The assignment of the lease applies only to the remaining installments to be repaid (the cost of the assignment is borne by our company). For more technical and financial details, I invite you to contact me at the e-mail address or by phone Specification of the machine: - Year of manufacture:2024 - Maximum grinding diameter: 320 Nedpfx Amjvkc D Iouolc - Maximum grinding length: 1500 - Supply voltage: 3 x 400V - Control voltage: 24V - DC - Metric system - Maximum permissible weight of objects clamped in the canine: 250 kg - Total travel distance in the X axis: 350mm - Rotation of the grinding wheel spindle: 50 - 1500 rpm (7.5kW) - Plunge grinding infeed speed range 0.03 to 20mm/min - Wheel diameter: 500mm - Morse taper 5 - Measuring probe to determine the workpiece - Workpiece support - Electronic wheel (handheld panel)

Condition: excellent (used), Year of construction: 2001, spindle bore: 20 mm, Machine in perfect condition. Njdpfx Asu Ivw Tjmuelc Can be inspected during production any time

Year of construction: 2010, condition: excellent (used), KRAMER Gmbh Dust Collection Filter Year: 2010 Njdsh D E Rdjpfx Amuelc Total capacity: 70,000 m3/h The system can be used independently as 2 filters, each with a capacity of 33,000 m3/h.

Condition: like new (used), Year of construction: 2020, operating hours: 400 h, functionality: fully functional, from company closure as good as new Pinacho STS18-180 lathe with Fagor control and revolver Year of construction 2020 Nlsdpfx Aewdhn Rsmuec Turning hours 400 Turning diameter above bed 360 mm Turning diameter above slide 190 mm Center length 1000 mm Turning length 840 mm Spindel through 42 mm Weight 2500 kg equipped with 3-jaw chuck, 8-fold revolver, Fagor control price excluding VAT, loaded on truck

Condition: used, Year of construction: 2013, total height: 2,240 mm, total length: 5,240 mm, total width: 2,500 mm, Empty weight: 2.700 kg Nlsdpfx Amjwnii Rjusc - Year: 2013 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: AA1/017355 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 9.5 - Type milling table: Beam table - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - System/software: SCM Maestro - Working range X [mm]: 3050 - Working range Y [mm]: 1250 - Z-axis working range [mm]: 1810 - Y-axis maximum stroke [mm]: 1550 - Voltage [V]: 400 - Current consumption [A]: 31 - Transport dimensions: 5240mm x 2500mm x 2244mm (l x w x h) - Transport weight [kg]: 2700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: like new (used), Year of construction: 2022, functionality: fully functional, TM-California-4: 4-Axis CNC Machining Center Type California/4-4 Nodpfjx Hd Hzex Amujlc • CNC machining machine suitable for aluminium profiles • Automatic opening and closing of the safety cover • Spindle movement via linear guides and servo motor • Equipped with ISO 30 spindle • Power 7.5 kW and speed 24,000 rpm • Electrically rotatable spindle from 0° to 180° • Pneumatic profile stop on both left and right sides • 6 pneumatic profile clamps • The profile clamps are manually positioned as standard • Tool magazine on the right with 6 slots + disc cutter • Automatic tool changing • Automatic cutter length measuring system • Automatic cooling mist with micro-dosing system • Industrial PC and remote service system • 21.5" PC with Windows 10 operating system • Includes Uni-Link CADCAM software with Uni-Link On Board • User-friendly interface for operation and visualisation • Machining length: 4,200 mm • Machinable profile cross-section: 230 x 230 mm • Accuracy: 0.1 mm/m