Vertical machining center

Quaser MV 154 P

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS Travels X-axis: 760 mm Y-axis: 530 mm Z-axis: 560 mm Bdsdpfx Ajxlf D Nsdqef Speeds Rapid traverse: 40 m/min Spindle Speed: max. 12,000 rpm Power: max. 25 kW Tool magazine and table Tool magazine positions: 30 Table size (L × W): 900 × 500 mm EQUIPMENT Including chip conveyor Including slant bed filtration system Including zero-point clamping system Including 4th axis Rotamatik 120 New Däublin

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 570 mm, workpiece height (max.): 520 mm, workpiece weight (max.): 300 kg, number of slots in tool magazine: 34, total height: 2,935 mm, total length: 3,600 mm, total width: 3,700 mm, table width: 860 mm, controller model: FANUC, coolant supply: 12 bar, distance table center to spindle nose: 780 mm, spindle motor power: 15 W, rapid traverse Z-axis: 40 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, spindle nose: ISO 40, spindle speed (max.): 10,000 rpm, spindle speed (min.): 80 rpm, table height: 560 mm, table load: 300 kg, tool diameter: 80 mm, tool length: 300 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with automatic pallet changer "DOOSAN mod. VC500" with CNC Fanuc 21i-MB Bjdpju T Hg Tjfx Adqodf

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Bdjdpfxetylpce Adqjf

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, total height: 2,700 mm, total length: 2,800 mm, total width: 3,550 mm, table width: 600 mm, table length: 1,200 mm, table load: 800 kg, overall weight: 7,500 kg, spindle speed (max.): 8,000 rpm, spindle nose: SK40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with extensive standard equipment: - FANUC or Heidenhain control - internal coolant supply - SK 40 - 24-position tool magazine, double-arm gripper - Glass scales in all axes - Chip conveyor - Electronic handwheel - Compressed air through the spindle - 30-position tool holder package - Complete 24-position tool equipment Bdedovtz Dxspfx Adqjf - Initial filling of coolant lubricant - Installation-commissioning-training - Guarantee up to 5 years possible HAITIAN European branch Ebermannsdorf

Condition: excellent (used), Year of construction: 2017, WITTMANN BATTENFELD MacroPower 900/8800 Injection Moulding Machine Type: Servo-hydraulic injection moulding machine Year of manufacture: 2017 Control system: UNILOG B8 INJECTION UNIT • Screw diameter: 105 mm • Screw stroke: 525 mm • Screw L/D ratio: 22 • Calculated shot volume: 4,545 cm³ Bdsdpjwzy N Ujfx Adqof • Injection pressure: 1,931 bar • Max. screw speed: 167 rpm • Max. plasticising rate (PS): 151 g/s • Screw torque: 8,000 Nm • Nozzle stroke / closing force: 950 mm / 129 kN • Injection flow rate: 725 cm³/s • Injection flow rate with dual pump (option): 906 cm³/s • Open-air injection flow rate with tank (option): 1,812 cm³/s • Barrel heating capacity: 53.9 kW • Number of heating zones: 7 CLAMPING UNIT • Clamping force: 9,000 kN • Max. opening stroke: 2,100 mm • Min./Max. mould height: 500–1,000 mm • Platen dimensions: 1,720 × 1,550 mm • Tie bar spacing: 1,200 × 1,000 mm • Ejector: stroke 300 mm / force 165 kN • Mould opening force: 300 kN GENERAL DATA • Pump power: 90 kW • Heating power: 53.9 kW • Hydraulic oil tank capacity: 1,100 l • Machine dimensions (L × W × H): 10,100 × 3,400 × 2,700 mm • Weight: 35,200 kg

Condition: good (used), Year of construction: 2006, turning length: 1,000 mm, spindle speed (max.): 5,000 rpm, rotational speed (min.): 12,000 rpm, We offer you: Manufacturer: MORI SEIKI Model: NT 4200/1000S Year of manufacture: 2006 Control: MITSUBISHI M-720BM (MAPPS 2) Technical Data: Turning length: 1,000 mm Bar capacity: max. 65 mm Main spindle: Max. speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: Ø 73 mm Counter spindle: Max. speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: Ø 73 mm Milling spindle: Bdsdpoxxraqefx Adqof Speed range: 0 – 12,000 rpm Tool interface: Capto C6 Number of tool positions: 100 Hollow chuck: Ø 67 mm Operating hours: approx. 27,000 h Spindle hours: approx. 16,100 h Technical features and equipment: - Y-axis - Fully indexable B-axis - Chip conveyor, discharge to the right - Standard coolant system - Interface for high-pressure coolant system, 70 bar - Tool spindle with through-coolant - Coolant spray gun - Air blast through counter spindle - Manual tool presetting on the main spindle - 3-color signal light - Double foot switch - Simultaneous 5-axis machining - Automatic power shut-off - Tool offset for 5-axis machining - Programmable data input - Dynamic diameter/radius exchange - Stroke check before movement Operating hours: 26,875 h (as of 22.08.25) Spindle hours: 16,093 h (as of 22.08.25) Accessories, illustrated tools, and clamping devices are only included if explicitly specified in the additional information. Subject to change and error in technical details and specifications. Prior sale reserved!

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 10 m/min, feed rate X-axis: 24 m/min, feed rate Y-axis: 24 m/min, feed rate Z-axis: 15 m/min, controller manufacturer: Fanuc, controller model: 0i, workpiece weight (max.): 3,000 kg, table width: 850 mm, table length: 1,500 mm, table load: 3,000 kg, spindle speed (max.): 600 rpm, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Double-column machining center SK50 tool holder Torque 630 Nm He Ul Tjv I Ucdjh U Sek Table load 3000 kg 6000 rpm Internal coolant supply Bdsdpev I Ucdjfx Adqef Distance between columns 1670 mm Spindle nose to table surface 150-850 mm 45 kW 3 or 4-year warranty

Condition: used, Year of construction: 2007, total height: 2,800 mm, total length: 3,000 mm, total width: 2,500 mm, overall weight: 8,300 kg, Mikron HSM 800 – High Speed Machining CenterYear 2007 | Heidenhain iTNC 530 | 24,000 rpm | 3-pallet changerHigh-precision CNC machining center from Mikron / GF AgieCharmilles, designed for demanding HSC applications such as mold & die, graphite and electrode machining, as well as flexible production.Travels: X 800 mm / Y 600 mm / Z 500 mm with pallet size 800 x 600 mm. Equipped with a 3-pallet changer for efficient automated operation.The machine features a high-speed spindle up to 24,000 rpm with HSK-A63 interface and a 50-position tool magazine.Well equipped with high-pressure through-spindle coolant (18–70 bar) including band filter system, chip conveyor, minimum quantity lubrication, oil mist extraction, rotating viewing window and probing system (M&H).Additional features include APS (Advanced Process System) and ITC (Intelligent Thermal Control) for maximum process stability and thermal accuracy. Weight approx.: 8,300 kg Control: Heidenhain iTNC 530 Dimensions of the clamping surface: 900 x 600 mm Travel Y-axis: 600 - mm Dimensions (LxWxH) approx.: 3000 x 2500 x 2800 mm Travel Z-axis: 500 - mm Travel X-axis: 800 - mm Bodpfx Aoy Tkc Aodqedf Year of construction: 2,007 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: excellent (used), Year of construction: 2006, X-Y-Z Axes travel:520x320x350mm Fanuc control system BT30 10000 rpm spindle APC Automatic Pallet Changer System Pallet size: 650x440 mm IN OUR STOCKS WE HAVE: Bdjdpfjnyh Sqox Adqsf *Horizontal Machining centers *CNC lathes 2 axis *CNC lathes 2 axis + C axis *CNC lathes 2 acis + C axis + Y axis *CNC tapping centers *CNC vertical machining centers %100 owned +50 CNC machine tools in stock! You are welcome to contact us for your further questions CNC World Machine LTD

Year of construction: 2004, condition: good (used), You can check under power, after scheduling an appointment. Bjdpfeidqwdjx Adqodf Dismantling, moving and transporting the machine is entirely the customer's responsibility. We can help with loading as needed. Parity: EXW Székesfehérvár