STEEL SECTION SCISSORS

PEDDINGHAUS 210/20

Condition: good (used), Cutting performance: Flat steel shears Blade length: 250 mm Sheets up to: 13 mm Flat steel up to: 150 x 16 / 200 x 13 mm Profile steel shears Angle iron up to: 110 x 10 mm Miter: 45° up to 90 x 9 mm T-iron up to: 110 x 10 mm Miter: 45° up to 90 x 9 mm U and I steel up to: NP 18 Stroke rate: approx. 30 1/min. Bar steel shears Round steel up to: 42 mm Square steel up to: 38 mm Notcher Sheets up to: 12 mm Notching width up to: 50 mm Notching depth up to: 85 mm Hole punch Thrust: 370 mm Punching capacity: approx. 50 t = 25 Ø x 16 mm / 20 Ø x 19 mm Ccqp90O7F7 Drive power: 3.0 kW Weight: approx. 2,200 kg Equipment - Hand and foot release - Support table on the hole punch - Various additional tool holders - Various replacement blades - Extensive accessories

Condition: used, Year of construction: 1985, round bar steel 50 mm square edge steel 45 mm L-beam 150 x 14 mm total power requirement 4 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,3 x 1 x 2,1 m No. 3418 5-fold combined profile steel shears with flat steel shears PEDDINGHAUS 210 Super 16 pressure capacity 80 to Round steel 50 mm Square steel 45 mm angle steel 150 x 14 mm Punching up to 90 mm diameter 5.5 HP Ixpekh8M0 Space requirement 2.30 x 1.0 x 2.1 m

Condition: used, Year of construction: 1983, round bar steel 50 mm square edge steel 40 x 40 mm Dqstg2 L-beam 140 x 13 mm Punch power 900 kN hole punching press: throat 510 mm hole punching press: max. length of stroke 29 mm hole punching press: capacity (dia. x thick.) 31 x 20 mm notching: l + T material 80 x 14 mm no. of strokes 40 / 45 Hub/min total power requirement 4 kW weight of the machine ca. 3,7 t dimensions 2,1 x 0,7 x 2,12 m Accessories: various punches and dies

Condition: used, 5-fold combined profile steel shears PEDDINGHAUS type 210 AD/13 Machine. No. 529A059 Year of manufacture approx. 1970 Punching machine: Punching force 60 ton. Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal throat depth 365 mm Bar steel shears: Cutting capacity Round 42 mm Square 38 x 38 mm Flat steel shears: Cutting capacity with shearing angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Profile steel shears: Shearing capacity angle steel at 90° 110 x 10 mm Shearing capacity angle steel at 45° 90 x 9 mm T-steel 110 x 10 mm Notching device: Rectangular notcher up to 12 mm sheet metal Punch dimensions 85 x 50 mm Motor power 3 kW Mains connection 380 Volt, 50 Hz. - Center punch detection device via hand lever and centering device - Mechanical stroke release via hand lever - Flat steel shears equipped with 2° blade - Mechanical hold-down device on the profile steel shears, bar steel shears and flat steel shears Space requirement L x W x H 1500 x 800 x 1900 mm Cjynbmx0O0 Weight 2000 kg good condition

Condition: used, machine/vehicle number: 2520, round bar steel:42 mm square edge steel:38 mm L-beam:90° 110x10 mm flat steel:150 x 16 mm Y7Lcmmo8M blade length:250 mm notching deepth up to:12 mm notching: l + T material:80 x 10 mm hole punhing press: pressure:50 t stroke:27 mm hole punching press: capacity (dia. x thick.):25 x 16 / 20 x 19 mm weight of the machine ca.:1,6 t dimensions of the machine ca.:1,6 x 0,85 x 1,8 m

Condition: used, Punching force: 200 kN For example, punch a 13 mm hole in 12 mm steel Viewfinder via handwheel Assortment of tools is included in the price Bkwoimcoblf

Condition: used, Section steel shears, profile shears, punch, punching machine, hole punch -Pressure force: 40 to T8Vwchnbq -Punching -Scissors -to cut -notch -mechanical release -Foot switch: 1 -div. Punches and dies -Dimensions: 800/1250/H1800 mm -Weight: 1112 kg

Condition: used, round bar steel div mm square edge steel div mm L-beam div mm No. 2984: 1 used plate, profile and bar shear with notcher 50 to manufactured by PEDDINGHAUS, type 210 / 13 Standard, built 1965 No. 3418: 1 used combined section shear 80 tonnes manufactured by PEDDINGHAUS, type 210 Super 16, built ca85 Cuonnbjt0a C0Q2Ysoms3 No. 3668: 1 used steel section shear + punching machine 95 to PEDDINGHAUS, type 210 Super 20, year of construction 1978 Space requirement 2.20 x 1.00 x 2.35 m, weight approx. 4.5 tonnes No. 3286: 1 used steel profile shear 65 to MUBEA / MUHR & BENDER, type KBL 16 N No. 1096 1 used hole punch 26 to EDEL SMO 26, various accessories

Condition: used, round bar steel 50 mm square edge steel 45 mm L-beam 140 x 13 mm total power requirement kW Bn0Lvyr weight of the machine ca. t dimensions of the machine ca. m ab Standort preiswert gegen Gebot abzugeben!

Condition: used, Year of construction: 1965, round bar steel 42 mm square edge steel 38 mm L-beam 90°: 110*10 / 45°: 90*9 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 1,5 x 1 x 1,5 m No. 2984: 1 fired plate, profile and bar shear with notcher PEDDINGHAUS 210 / 13 Standard Shho0Ny9Jn Pressure capacity 50 to Flat steel 150 x 16 mm Various dies and punches notching (52 x 85 mm), for sheet metal up to 12 mm Hole punch up to Ø 25 with 16 mm material thickness Shear strokes 32 Strokes of the hole punch 40

Condition: used, Year of construction: 1978, round bar steel - mm square edge steel - mm L-beam - mm Rvxks7Wqlb total power requirement 7,5 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 2,2*1*2,35 m div. punches and dies Foot switch Spare blade

Condition: good (used), bench vice, metalworker's vice, parallel vice -Jaw width: 150 mm -Wingspan: 200 mm Cnwzv2Gy -Number: 2x vices available -Price: per piece -Dimensions: 490/340/H195 mm -Weight: 27 kg

Condition: used, flat steel 110x25 / 280x10 mm L-beam 130 x 13 mm round bar steel 50 mm square edge steel 45 Boh909I9W0O punching force max. 60 kN total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Extensive range of accessories: Knives for L-steel, T-steel and special knives Many punches and dies, stops, replacement notching knives Special punching device up to Ø 40 mm

Condition: ready for operation (used), A Peddinghaus 214/200 billet shear is available. Cutting capacity: square: 70mm, round: 80mm, flat: 180mm x 35mm/250mm x 28mm, weight: approx. 5000kg. Dqfzreogr

Condition: used, Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch Hsl8B2F -Shearing tool for channel steel: 120 mm -Type: 441215124901 -Type: 441215124902 -1x dimensions: 215/205/H30 mm -1x dimensions: 210/220/H30 mm -Weight: 19 kg

Condition: used, Year of construction: 2004, Punching force: 500 kN For example, punch a 20 mm hole in 18 mm steel Stroke triggering via foot switch Cx03Jiyx Assortment of tools is included in the price

Condition: used, Please contact us for more information. Z0Aoenjji

Year of construction: 1995, Condition: like new (used), Roller conveyor length: 6000 mm Rolls divided, total width: 280 mm Min.height: 630/760 mm Max.height: 1150/1300 mm Difference between the height information given by rollers and the transverse movement Bvxgwx2Ccx Weight: 625 kg

Condition: good (used), Year of construction: 1993, Peddimat machining center for profile steel Manufacturer: Peddinghaus Type: LC 1250 / TDK 1000/9F Year of manufacture: 1993 C0Tlgpgu2K System consisting of: Long-cut saw, drilling system and marking system Long-cut saw Manufacturer: Peddinghaus Type: Peddimat LC 1250 Year of manufacture: 1993 Control panel Saw blade: Ø 1250 mm, Z = 5 Motorized miter adjustment Hydr. Locking for miter swiveling in the range of 45 / 45° Lowering device Infeed and straightening device Interface for automatic saw blade feed and automatic miter adjustment Drilling system Type: Peddimat TDK 1000/9F Vertical drilling unit with 3 spindles each including internal coolant supply Hole diameter max: 40 mm Peddimat roller feed system including measuring disks on the feed and discharge sides Automatic hold-down device each on the feed and discharge side Automatic "Z" tower adjustment by DS servo motor Automatic height adjustment of the horizontal clamping devices 4-axis CNC microprocessor control Siemens SINUMERIK 3G Signing system Number of types: 36 pieces Number of letters: 26 pieces Number of numbers: 10 Piece Font height mm: 12 Signing depth for material 450 N/mm2 mm: 0.6 Signing pressure at 100 bar (adjustable) kN: 50 140125ä

Condition: refurbished (used), Functionality: fully functional, Forklift battery with 1 year warranty 48V 5PZS 775AH REMA 320 A plug installed - alternative plugs can be converted by arrangement including Aquamatik for automatically filling the cells with distilled water Test date 2024 Dimensions: 832 x 631 x 785 mm L/W/H Weight: approx. 1,120 kg Capacity: min. 90-100% (C5 protocol is included with delivery) Linde E 16 - 335-00 Linde E 16 - 386-00 Linde E 16 CH - 1275-00 Linde E 16 H - 386-00 Linde E 16 H - 386-02 - side change Linde E 16 P - 322-00 Linde E 16 P - 335-00 Linde E 16 PH - 1275-00 Linde E 16 PH - 386-00 Linde E 16 PH - 386-02 - side change Linde E 18 - 386-02 - side change Linde E 18 P - 322-00 Linde E 18 P - 335-00 Linde E 18 PH - 386-00 Linde E 18 PH - 386-02 - side change Linde E 18 Z - 322-00 Linde E 20 P - 335-00 Linde E 20 PH - 1275-00 Linde E 20 PH - 386-00 Linde E 20 PH - 386-02 - side change Linde E 20 PH EVO - 386-02 Linde EG 16 - 1275-02 - side change Linde EG 16 H - 1275-02 - side change Linde EG 16 P - 1275-02 - side change Linde EG 16 PH - 1275-02 - side change Linde EG 20 PH - 1275-02 - side change Linde R 20 - 1120-00 Linde R 20 G - 1120-00 Crown SC 3013 and more... Sjoeen9Se All common battery sizes available.

Condition: good (used), – Capacity 40 tons – Hydraulic – 5 stations Zp3K7X93Q – Foot control – 380V

Condition: used, for sheet thickness up to: 7 mm blade length: 175 mm Ncq9Zgm Round material up to: 20 mm square material up to: 18 mm space requirement: 1000 x 770 x 690 mm hand-guided

Condition: refurbished (used), Functionality: fully functional, Forklift battery with 1 year warranty 80V 3PZS 465AH REMA 320 A plug installed - alternative plugs can be converted by arrangement including Aquamatik for automatically filling the cells with distilled water Test date 2024 Dimensions: 1,025 x 564 x 784 mm (L/W/H) Weight: approx. 1,240 kg Capacity: min. 90-100% (C5 protocol is included with delivery) Linde K - 5231-00 Linde K - 5231-00 - side change Linde K 12 - 02 - 148-00 Linde K 15 - 148-00 Linde P 120 - 5007-10 - side change Linde P 120 - 5007-10 - vertical change Linde P 180 - 5007-10 - lateral change Linde P 180 - 5007-10 - vertical change Still MX 13 Still R 60-15 Still R 60-16 Still R 60-18 | Still R 60-20 Still RX 60-16 Still RX 60-20 R3Xeqygzs Jungheinrich EKX 513 Toyota 7FBMF16 Toyota 7FBMF18 Toyota 8FBMKT20 Toyota FBM16 Crown TSP 6000-A Crown TSP 7000 Doosan BR13R-5 Mitsubishi FBP16 Yale MTC 13 and more... All common battery sizes available.

Year of construction: 1995, Condition: ready for operation (used), On 5 stands, with an additional swivel extension total travel length: 7000 mm C2Lymchmq Slide with tape measure to determine length 14 adjustable stops for indexing the set lengths Slide or workpiece can be moved by hand to actuate electrical triggering of the work process from the slide Total length: 7800 mm Height: 1100 mm Weight: 250 kg

Condition: used, machine/vehicle number: PA 1107, flat steel capacity: 80 x 10 mm electrical connection: 380 V, 1,3 kW space needed: 1000 x 650 x 1480 mm weight: 400 kg Js0Ln3