FLAT GRINDING MACHINE

Okamoto PSG -63 UA

Condition: refurbished (used), functionality: fully functional, Used machine retrofitted with new CNC-controller and new 3D-geometry-software The equipment of the measuring machine is freely selectable. We procure the right components from the customer "just in time". Machine will be modernized with new controller, probe head, probes from Renishaw, PC and 3D software RationalDMIS. Technical Data: Measuring Range apprx: X = 1.000 mm - Y = 1.200 mm - Z = 600 mm Accurracy: MPEE : 1.9+L/300 according the manufacturers specification Rodpfx Afoxzp U Dj Uop Illustrations still with original probe configuration Price on request >>> single machine - as long as available

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Rsdpolhwr Rofx Af Uop Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: used, grinding length 4000 mm grinding width 1450 mm workpiece height 1250 mm control Siemens 840 D workpiece weight 11000 kg column daylight 1460 mm table surface area 4000 x 1250 mm table feed 1 - 45 m/min cross rail - adjustment 1250 mm Rsdpfx Ajwa Dx Dof Usp total power requirement 40 kW dimensions of the machine ca. 12,3 x 6 x 4,8 m Equipment/Accessories: - 1 universal grinding support, 7.5 kW Swivel range grinding spindle +/- 110° grinding disc dimensions Ø 500 x 60 mm Vertical adjustment 350 mm with puller - 1 peripheral grinding support, 22.5 kW Grinding wheel dimension Ø 600 x 100 mm Vertical adjustment 150 mm with puller - with 6 magnetic plates arranged on the table - seperate clamping table - various grinding wheels and flanges - Technical documentation

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, grinding length: 600 mm, grinding width: 375 mm, grinding height: 400 mm, grinding wheel diameter: 300 mm, table load: 400 kg, grinding wheel width: 50 mm, overall weight: 3,600 kg, ELB Optimal 6375 SPS, year of manufacture 1995, grinding area 600 x 375 mm, grinding wheel 300 x 50 mm, spindle power 3.7 kW, automatic grinding cycle with roughing, finishing, spark-out, and lift-off. The dresser is mounted on the spindle head with compensation. The machine has been professionally overhauled by us and now meets the geometry specifications of a new machine. The grinding spindle has been newly mounted. Accessories: electro-permanent magnetic chuck 600 x 350 mm, coolant tank with automatic paper filter. All functions have been tested and the machine can be demonstrated under power at our facility. We are happy to handle installation and on-site training, as well as future service needs. Financing / leasing is not a problem, and we will be happy to provide an offer! Rodpfsxdalfox Af Uop

Condition: ready for operation (used), Year of construction: 2001, spindle motor power: 45,000 W, total height: 2,120 mm, overall weight: 11,500 kg, controller manufacturer: SIEMENS, controller model: 810 D, product length (max.): 5,400 mm, number of axes: 2, This Weiler E120x3000 was manufactured in 2001. It features a center distance of 3000 mm, center height of 600 mm, and a swing diameter over bed of 1200 mm. The spindle bore is 165 mm, and it offers a robust main drive with a power of 45/37 kW. Ideal for heavy-duty turning, this machine includes accessories like a lathe chuck, faceplate, and a steady rest. Contact us for more information about this machine. • Working area: • Center distance: 3000 mm • Center height: 600 mm • Swing diameter over bed: 1200 mm • Swing diameter over cross slide: 830 mm • Cross slide travel: 590 mm • Bed slide guide length: 860 mm • Turning tool cross-section (H x W): 40 x 40 mm • Tool holder: Parat size 4 • Turning spindle: • Spindle head DIN 55027 / 55026, size 15 • Spindle bore: 165 mm • Main spindle taper: metric 171 • Main drive: • Drive power (60% / 100% ED): 45 / 37 kW • Max. spindle torque: 8000 Nm • Speed range gear stage 1: 1–280 rpm Rodpfxox D Hz To Af Usp • Speed range gear stage 2: 4–900 rpm • Tailstock: • Quill diameter: 140 mm • Quill stroke: 300 mm • Quill internal taper: MK 6 • Machine dimensions and weight: • Overall length: 5400 mm (without chip conveyor), 6535 mm (with chip conveyor) • Overall width: 2600 mm • Overall height: 2120 mm • Machine weight: 11,500 kg • Overhaul services: • Hardening and grinding of all bed guides • Grinding of tailstock guides • Overhaul of the complete bed and cross slide assembly (grinding/scraping all guideways) • Renewal of the bed slide's sliding lining • Renewal or relining of the keyways and bottom guides • Renewal of all wipers • Replacement of all belts • Overhaul of the main spindle assembly in the headstock • Renewal of the X-axis including bearings • Renewal of the Z-axis including bearings • Overhaul of the tailstock quill (MK 6 taper regrinding), replacement of spindle and nut • Adjustment of the tooling system • Replacement of the main spindle motor • Checking of the auxiliary motors (X- and Z-axis) • Overhaul of existing safety devices (sliding hood/jaw guard) • Replacement of all rotary, toggle, and limit switches • Replacement of the spindle and handwheel encoder • Replacement of the movable cables and coolant hoses in the work area • Replacement of the central lubrication unit • Renewal of the energy chains • Painting according to specifications (standard textured basalt and light gray) • Assembly and geometric inspection of the machine according to DIN 8605 Additional equipment • 1x used lathe chuck Ø630 mm with various jaws • 1x used faceplate Ø1100 • 1x used steady rest, max. Ø300 • 1x used chip conveyor

Condition: used, Tool turret TER Type:0.5.480.525 Rsdpfsvi Hvlsx Af Ujp The article is used, comes from an industrial machine dismantling and was in operation until the dismantling. Please note that this is a sample image, which may have different traces of use and/or software. Brand names, trademarks and registered trademarks are the property of their legal owners and are used here for descriptive purposes only. Further information can be found on our homepage *

Condition: used, Year of construction: 1986, grinding length 600 mm grinding width 300 mm Rjdsxxbzkspfx Af Usp workpiece height 250 mm table surface area 900 x 250 mm grinding wheel size ø 300 x 50 x ø 75 mm table speeds 1 - 25 m/min rapid traverse vertical 0,15 m/min total power requirement 4,5 kW weight of the machine ca. 3,5 t dimensions of machine L x W x H 2,14 x 1,85 x 2,12 m Accessories: magnetic plate 600 x 300 mm, grinding wheel with flange, wheel trueing attachment, wet grinding attachment with band filter device

Condition: used, Year of construction: 2002, x-travel 750 mm y-travel 500 mm z-travel 400 mm spindle taper ISO SK 40 spindle speed: 20-8000 1/min rapid travel x/y/z 25.000 mm/min feed range 1-5000 mm/min Size of table plate 1000 x 500 mm tool change unit 20 Control Heidenhain TNC 530 Number of working hours 25754 h table load 400 kg workpiece length 300 mm total power requirement 7,5 kW weight of the machine ca. 4 t dimensions of the machine ca. 2,3 x 2,6 x 2,56 m WEMAS VZ 750 machining centre, 3 axes, 4th axis prepared Good condition, few operating hours, only samples and prototypes, mainly aluminium. Control system 30,397 hours Rsdpfxjyatyie Af Ujp Machine 25,754 hours Programme run 8,683 hours control: iTNC 530 ; NC Software 340 420 - xx, updated 2021 Everything goes with you! Vice, tool holder, tools, milling cutters and much more. Delivery exw., free loaded on truck

Condition: good (used), Surface Grinding Machine ELB SWB06-VAII - Grinding length: 600 mm Rjdpsxgicxsfx Af Usp - Grinding width: 500 mm - Spindle speed: 1400/2800 rpm - Z-axis feed: Automatic / Manual - Y-axis feed: Automatic / Manual - Grinding movement: Automatic / Manual - Magnet size: 600x500 mm - Automatic feed - Grinding wheel dressing device - Max. grinding wheel diameter: 300 mm - Coolant system - Drive power approx. 6 kW Dimensions: LxWxH 2.6x2.2x2.5 meters / Weight 3,500 kg Errors and omissions excepted.

Condition: good (used), machine/vehicle number: 3400, Year of construction: 2014, load capacity: 8,000 kg, lifting height: 3,150 mm, mast type: duplex, total length: 5,800 mm, total width: 1,960 mm, operation weight: 12,800 kg, additional equipment features: Warning triangle, Front mud guards, Rear mud guards, Equipment: lighting, Linde H80 from Uniktruck Rsdovykw Uopfx Af Uep