MIKRON UM 600

MIKRON UM 600

Condition: used, Year of construction: 1998, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: 94.98.030, feed length X-axis: 600 mm, feed length Y-axis: 500 mm, feed length Z-axis: 450 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 100 rpm, total height: 2,000 mm, total width: 2,000 mm, total length: 2,800 mm, table width: 520 mm, table length: 900 mm, position of the milling head: mittig, type of input current: three-phase, rotational speed (max.): 6,000 rpm, rotational speed (min.): 100 rpm, table load: 400 kg, overall weight: 3,500 kg, input voltage: 400 V, workpiece weight (max.): 100 kg, input current: 40 A, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Good used CNC milling machine with low hours. Used exclusively for repairs and very small production runs. Extensive assortment of tool holders as shown in the photos, including vise, chucks, cutters, plates, and tap holders. Also equipped with a Benz high-speed spindle for wet operation up to 25,000 rpm. TECHNICAL DETAILS Drive power at 44% duty cycle: 15 kW Drive power at 100% duty cycle: 6 kW Max. torque: 50 Nm Ijdpfx Ajywn Sijd Esia Machining spindles (vertical and horizontal) Max. spindle torque at 44% duty cycle: 800 Nm Number of gearbox stages: 4 Adjustable speed range (vertical and horizontal): 10 – 6,000 rpm Toolholder / pull stud: SK 40 / DIN 69871 Max. tool weight: 13 kg Tool diameter: 130 mm Automatic travel distances Spindle longitudinal feed (X-axis): 600 mm Spindle transverse feed (Y-axis): 500 mm Spindle vertical feed (Z-axis): 450 mm Feed drives (AC) Programmable feed rate X / Y-axis: 0 – 15,000 mm/min Programmable feed rate Z-axis: 0 – 12,000 mm/min Rapid traverse rate X / Y-axis: 15,000 mm/min Rapid traverse rate Z-axis: 12,000 mm/min Coolant tank capacity: 150 l Flow rate: approx. 20 l/min Clamping table Table size: 520 × 900 mm Number of T-slots: 4 T-slot width: 14 H7 Table load capacity: 400 kg Tool changer TCD 44 Tool stations: 22 Tool diameter: 80 / 130 mm Max. tool length: 350 mm Max. tool weight: 6 kg Max. workpiece weight in drum magazine: 200 kg Chip-to-chip time: 20-25 s Tool change time: 12 - 16 s Electrical connection data Total installed nominal power: 15.8 kW Usable and connected load: 12.3 kW Operating voltage and frequency: 3 × 400 V / 50 Hz

Condition: good (used), Year of construction: 1996, Travel X/Y/Z 600/500/450 mm, Control HEIDENHAIN TNC 410 PA, spindle power 9,0 KW, spindle speed 5-6300 rpm, ISO40, table size 530x900 mm, max. table load 400 kg, tool changer 22 places, dimension 2200x2700x2050 mm, ca. 3550 kgs, accessoires Renishaw tool prove, 4th axis TRIAG with clampings, Software updated, flat screen, radio data transfer installed, tool holders, manuals Iisdpfjqagugsx Ad Eea

Condition: good (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, For sale is a machining center from Mikron, model UM 600. The machine is in good condition and immediately ready for operation. Technical data: Year of manufacture: 1997 Travel X: 600 mm Travel Y: 500 mm Travel Z: 450 mm Clamping surface: 900 x 530 mm Max. table load: 300 kg Control: Heidenhain TNC 426 Tool holder: SK 40 Max. spindle speed: 6,300 rpm Rapid traverse X / Y / Z: 15 m/min No tool changer installed; instead, a support arm for conversion of the milling head is mounted (see picture 4). Isdpfx Aowx Naqod Eoia Setup dimensions (L x W x H approx.): 2.5 x 2.2 x 2.1 m Weight approx.: 3.7 t Accessories such as tool holders and vices are not included in the offer. Transport and loading can be organized upon request at an additional charge, Europe-wide. Prices plus VAT. Inspection by appointment possible. Please contact us – our team is happy to assist you. Trade-in or exchange possible! Machinery purchase/sale BUYING AND SELLING OF PRODUCTION AND METALWORKING MACHINES, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell yours? For further information or contact options, please visit our website.

Condition: used, Year of construction: 1997, x-travel 600 mm y-travel 500 mm z-travel 450 mm Control Heidenhain TNC 426 PB tool change unit 22-fach tool taper SK40 turning speeds 5-6.300 U/min table-size 900 x 530 mm table load 400 kg total power requirement 9 kW Iiodpfxjykb Hlo Ad Eoa weight of the machine ca. 3550 kg dimensions of the machine ca. 2,2 x 2,7 x 2,05 m 3-axis vertical machining centre MIKRON UM 600, built in 1997 In excellent technical condition, all guides have been freshly scraped. The spindle has been re-mounted and has since been used for only 262 hours. New power unit for spindle drive installed. Accessories: Heidenhain TS 642 touch probe system 2 new vices SK40 tool holder