Vertical Milling Machine

MIKRON UM 600

Condition: used, Year of construction: 1998, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: 94.98.030, feed length X-axis: 600 mm, feed length Y-axis: 500 mm, feed length Z-axis: 450 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 100 rpm, total height: 2,000 mm, total width: 2,000 mm, total length: 2,800 mm, table width: 520 mm, table length: 900 mm, position of the milling head: mittig, type of input current: three-phase, rotational speed (max.): 6,000 rpm, rotational speed (min.): 100 rpm, table load: 400 kg, overall weight: 3,500 kg, input voltage: 400 V, workpiece weight (max.): 100 kg, input current: 40 A, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Good used CNC milling machine with low hours. Used exclusively for repairs and very small production runs. Extensive assortment of tool holders as shown in the photos, including vise, chucks, cutters, plates, and tap holders. Also equipped with a Benz high-speed spindle for wet operation up to 25,000 rpm. TECHNICAL DETAILS Drive power at 44% duty cycle: 15 kW Drive power at 100% duty cycle: 6 kW Max. torque: 50 Nm Machining spindles (vertical and horizontal) Max. spindle torque at 44% duty cycle: 800 Nm Number of gearbox stages: 4 Adjustable speed range (vertical and horizontal): 10 – 6,000 rpm Toolholder / pull stud: SK 40 / DIN 69871 Max. tool weight: 13 kg Tool diameter: 130 mm Automatic travel distances Spindle longitudinal feed (X-axis): 600 mm Spindle transverse feed (Y-axis): 500 mm Spindle vertical feed (Z-axis): 450 mm Feed drives (AC) Programmable feed rate X / Y-axis: 0 – 15,000 mm/min Programmable feed rate Z-axis: 0 – 12,000 mm/min Rapid traverse rate X / Y-axis: 15,000 mm/min Rapid traverse rate Z-axis: 12,000 mm/min Coolant tank capacity: 150 l Flow rate: approx. 20 l/min Hodpfx Aoywn Sieczjnk Clamping table Table size: 520 × 900 mm Number of T-slots: 4 T-slot width: 14 H7 Table load capacity: 400 kg Tool changer TCD 44 Tool stations: 22 Tool diameter: 80 / 130 mm Max. tool length: 350 mm Max. tool weight: 6 kg Max. workpiece weight in drum magazine: 200 kg Chip-to-chip time: 20-25 s Tool change time: 12 - 16 s Electrical connection data Total installed nominal power: 15.8 kW Usable and connected load: 12.3 kW Operating voltage and frequency: 3 × 400 V / 50 Hz

Condition: good (used), Year of construction: 2008, HAAS VF-5D / 40 MACHINING CENTER TRAVELS : X : 1,270 mm Y : 660 mm Z : 635 mm DISTANCE BETWEEN PLANE – TABLE AND SPINDLE NOSE : 178 – 813 mm TABLE : DIMENSIONS : 1,321 x 584 mm LOAD CAPACITY : 1,815 mm NUMBER AND SIZE X PITCH OF T-SLOTTS : 7.14 X 80 mm SPINDLE : ROTATIONAL SPEED : 8,000 RPM SPEED RANGES : 2 SPINDLE NOSE : ISO 40 HIGH PRESSURE / INTERNAL COOLANT FEEDS : RAPID SPEED : 18,000 mm / min. WORKING SPEED : 12,700 mm / min. JOG : 0 – 1,260 mm / min. TOOL MAGAZINE : 24 POSITIONS POWER : 15 KW WEIGHT : KG. 7,000 YEAR OF FIRST INSTALLATION : 2008 Hnsdpfxovf Nw De Aczek

Condition: ready for operation (used), Year of construction: 1997, controller manufacturer: HEIDENHAIN, controller model: TNC 410/426, tool weight: 12,000 g, This 3-axis MIKRON UM 600 vertical machining center was manufactured in 1997. If you are looking to get high-quality milling capabilities, consider the MIKRON UM 600 machine we have for sale. Contact us for more information. Additional equipment • Noise Emission: Sound power level of 75 dB (A) Machine Benefits Technical Machine Benefits • Ac main spindle drive • Drive power at 40% duty cycle: 9 kw // drive power at 100% duty cycle: 6 kw • Max. Torque at the spindle: 35 nm • Stepless speed control: yes • Tool spindles (fk 40) • Max. Torque at the spindle at 40% duty cycle: 800 nm • Speed range adjustable: 5 - 5000 min⁻¹ • Number of gear stages: 4 • Minimum draw-in force: 100000 n • Minimum ejection force: 3500 n Extra Information Movement Travels in Automatic Mode: Rapid traverse of the clamping fixture (X-axis): 600 mm Hnedpox D Id Aefx Aczsk Rapid traverse of the spindle slide (Z-axis): 500 mm Rapid traverse of the clamping fixture (Z-axis): 450 mm AC Feed Drives Programmable feed rate: mm/min (X, Y-axis), mm/min (Z-axis) Rapid traverse speed: 15 m/min (X, Y-axis), 12 m/min (Z-axis) Feed force at 100% duty cycle: 9000 N (X, Y-axis), 11000 N (Z-axis) Media Coolant System Capacity: 150 liters Flow rate: approx. 30 l/min at 2.2 bar

Condition: good (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, For sale is a machining center from Mikron, model UM 600. The machine is in good condition and immediately ready for operation. Technical data: Year of manufacture: 1997 Travel X: 600 mm Travel Y: 500 mm Travel Z: 450 mm Clamping surface: 900 x 530 mm Max. table load: 300 kg Control: Heidenhain TNC 426 Tool holder: SK 40 Max. spindle speed: 6,300 rpm Rapid traverse X / Y / Z: 15 m/min No tool changer installed; instead, a support arm for conversion of the milling head is mounted (see picture 4). Setup dimensions (L x W x H approx.): 2.5 x 2.2 x 2.1 m Weight approx.: 3.7 t Accessories such as tool holders and vices are not included in the offer. Transport and loading can be organized upon request at an additional charge, Europe-wide. Prices plus VAT. Inspection by appointment possible. Please contact us – our team is happy to assist you. Trade-in or exchange possible! Hedpfewx Naqsx Aczsnk Machinery purchase/sale BUYING AND SELLING OF PRODUCTION AND METALWORKING MACHINES, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell yours? For further information or contact options, please visit our website.

Year of construction: 2000, condition: ready for operation (used), Travel X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6000rpm, spindle power: 8.5kW, tool holder: SK40, tool positions: 22, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control: Heidenhain TNC 426. An on-site inspection is possible. Hnsdpov Uqb Nefx Aczok

Condition: used, Year of construction: 1997, x-travel 600 mm y-travel 500 mm z-travel 450 mm Control Heidenhain TNC 426 PB tool change unit 22-fach tool taper SK40 turning speeds 5-6.300 U/min table-size 900 x 530 mm table load 400 kg total power requirement 9 kW weight of the machine ca. 3550 kg dimensions of the machine ca. 2,2 x 2,7 x 2,05 m 3-axis vertical machining centre MIKRON UM 600, built in 1997 In excellent technical condition, all guides have been freshly scraped. The spindle has been re-mounted and has since been used for only 262 hours. New power unit for spindle drive installed. Accessories: Hodeykb Hljpfx Aczjnk Heidenhain TS 642 touch probe system 2 new vices SK40 tool holder

Condition: ready for operation (used), Sell due to new acquisition good condition Mikron VC 1000 milling machine Hsdpfxjh Tnpxo Aczjnk

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Hnsdpetylpcjfx Aczok

Condition: good (used), Year of construction: 1996, travel distance X-axis: 710 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 5 rpm, For sale: Mikron UMS 710-900 machining center The machine is in good condition. New ball screw drives for X and Y axes, new cover for Z axis, and new Z-axis spiral. Technical data: x-travel: 710 mm y-travel: 630 mm z-travel: 500 mm CNC control: HEIDENHAIN TNC 426 Table size: 1200 x 600 mm Max. table load: 500 kg Spindle mount: SK 40 with ring groove Spindle speed range: 5 – 5,000 rpm Spindle drive power: 11 kW Feed rate range: 0 – 10,000 mm/min Rapid traverse: 10 m/min Operating voltage: 400 V Total connected load: 15 kW Machine weight approx.: 5.0 t Floor space required approx.: 2.40 x 3.40 x 2.30 m Chip tray No internal coolant supply (IKZ) 44-position tool changer Handwheel Initial filling with operating fluids for the machine available on request. Loading and transport can be organized throughout Europe for an additional charge. All prices plus VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase & sales BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES, AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your equipment? Hnsdett Acgepfx Aczok For further information or contact options...

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 570 mm, workpiece height (max.): 520 mm, workpiece weight (max.): 300 kg, number of slots in tool magazine: 34, total height: 2,935 mm, total length: 3,600 mm, total width: 3,700 mm, table width: 860 mm, controller model: FANUC, coolant supply: 12 bar, distance table center to spindle nose: 780 mm, spindle motor power: 15 W, rapid traverse Z-axis: 40 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, spindle nose: ISO 40, spindle speed (max.): 10,000 rpm, spindle speed (min.): 80 rpm, table height: 560 mm, table load: 300 kg, tool diameter: 80 mm, tool length: 300 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with automatic pallet changer "DOOSAN mod. VC500" with CNC Fanuc 21i-MB Hnodpeu T Hg Tefx Aczjk