Wide belt sander

Maweg

Condition: used, Year of construction: 1992, Dimensions: 5700 x 1300 x 2400 mm Storage location: Nattheim Bsdpevvkl Dofx Adqowr

Year of construction: 2009, condition: new, Belt dimensions: 2000x100 mm Belt speed: 30 m/s Bwodpex Davofx Adqer Angle adjustable from 30 to 90° Power: 3 kW, 4000 V, 50 Hz Weight: 200 kg Rollers for grinding reamers: 3/4"; 1/2"; 1"; 1 1/4"

Year of construction: 1995, condition: not inspected (used), Number of sanding units 2 st. sanding width 180 mm Sanding height max. 150 mm MAWEG Robert Hildebrand Saturn Duo Professional two-belt finish sanding machine with brushing unit Double-sided; sands from top and bottom Pneumatic belt oscillation Pneumatic belt tensioning Feed via top and bottom conveyor belts with spring-loaded hold-down rollers; infinitely variable speed (5–15 m/min) Workpiece thickness adjustment with pre-selectable stock removal amount at machine infeed, based on sensing the raw timber thickness Adjustment to wood thickness via motorized positioning of the machine's upper section Digital thickness setting via mechanical counter with 0.1 mm display and zero-point adjustment Safety switch for oversized wood thickness at machine infeed Double-sided brushing unit with integrated workpiece blow-off Sanding belt blow-off (top and bottom) Belt breakage monitoring switch with automatic shutdown of all drives Technical data: Bwodpfx Aezqgg Ajdqsr Top motor: 4 kW Bottom motor: 4 kW Top brush: 0.37 kW Bottom brush: 0.37 kW Feed drive: 0.5 kW Height adjustment: 0.12 kW Compressed air requirement: 6 bar, 400 NL/min Sanding belt speed: 25 m/sec Machine dimensions: 1,600 mm length 1,150 mm width 1,800 mm height Workpiece dimensions: Min. thickness 15 mm, max. thickness 150 mm Min. width 10 mm, max. width 180 mm Min. length 290 mm 4 extraction ports: 2 x 120 mm, 2 x 80 mm; required air velocity at extraction port: 25 m/sec (Technical specifications according to manufacturer – subject to change/no guarantee!)

Condition: excellent (used), Catalog number 7828 TECHNICAL DATA - max. width of workpiece: 200 mm - max. height of workpiece: 180 mm - 2 sanding units: - top: metal roller + sanding shoe + metal roller - bottom: metal roller + sanding shoe + metal roller - top: Bwsdpfxozp N Erj Adqjr - 2 pressure rollers, rubber, pulling type - sanding unit - 2 pressure rollers, rubber, pulling type - bottom: - sanding unit - side guide strip - electrically adjustable sanding height, 0.37 kW - 6 feed speed settings + right/left: 2.25; 4.5; 9; 12.5; 18; 25 m/min - feed motor: 0.75 kW - main motors: 2 x 4 kW - diameter of dust extraction nozzles: 80 mm - overall dimensions (L/W/H): 1500x740x1600 mm - weight: 560 kg ADVANTAGES - Made in Germany - 2 sanding units - Unpainted - DTR documentation - Used sander, very good condition Net price: 10900 PLN Net price: 2600 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to higher fluctuations)

Condition: excellent (used), Year of construction: 1992, Manufacturer EVG Type TSD 7-25 Machine No. 958 Year of manufacture 1993 Working direction L > R Bjdpfx Adswp Ilyoqswr Beam types KT 8… Beam height (mm) 90-250 Carrier length min. (mm) max. (mm) 14,000 Fixed lengths: Yes Cutting pitch (mm) 100/200 Spool unwinder (pcs.) 5 LAR: Yes Wire diameter - 5-12 mm smooth/ribbed Diagonal - 4-7 mm smooth / ribbed Stack height max. (mm) - 500

Condition: excellent (used), Year of construction: 2008, I sell the press for glulam glued massive wood MAWEG ROTOR 6000. Material size 6000 X 900 x 200mm 4 working areas, automatic rotation. 12 pcs hydraulic cross pressures per 1 area 12 pcs hydraulic surface pressures per 1 area Bwodpfxezraals Adqjr Self weight 7000kg. Very good condition. Available immediately.

Condition: excellent (used), MAWEG SATURN DUO grinding machine - after the technical review - very good condition - belt length 1800 mm TECHNICAL SPECIFICATIONS: grinding width 200 mm grinding height 145 mm 2 x sanding aggregate with shoe Bedpfef N Nflex Adqjwr 1 upper brush 1 lower brush shoe electric height adjustment feed speed from 4 - 16 m / min feed speed adjustable on the gear motor pneumatic oscillation blowing on the tape 2 x 4 kW main engines 0.55 kW feed motor connection diameter 4 x 80 mm dimensions (length / width / height) 190 x 110 x 210 cm weight ~ 1300 kg

Condition: good (used), Year of construction: 1984, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Abus, crane chassis with electric cable winch -Cable pull: Type GM1032FD -Load capacity: 3200 kg -Main stroke/fine stroke: 5/0.7 m/min -Hook path: 6.0 m -Roller spacing: 1400 mm, dimensions see photos -Drive system: Abus Bwedpeu I Hpaefx Adqsr -Accessories: Connection cables, without crane operation -Transport dimensions: 1550/1180/H530 mm -Weight: 512 kg

Condition: used, Dimensions: approximately 2500 x 1200 x 600 mm, semi-hydraulic, with electro-motorized adjustment of the press wall. Storage location: Nattheim. Bwodpfx Ajzd Hm Njdqor

Condition: used, Second-hand machine Second-hand pneumatic frame press from Maweg MNo.: 7004124588 Pressing area: Length approx. 3500 mm / Height approx. 2450 mm 2 horizontal press cylinders 3 vertical press cylinders Availability: by arrangement Location: Röllbach Bwodpfx Adozk Nwkjqer

Year of construction: 2006, condition: excellent (used), machine/vehicle number: MBMA-GI, 1x ABUS wire rope hoist Crane hoist 6300KG 6.3to GM2063H6-201.41.063 E160 4 pieces available Payload 6300KG / 6.3t payload / lifting load - 4 strands with 2 lifting speeds, lifting height approx. 6m, track width of the lifting gear approx. 30cm (+- a few cm adjustable) Bodpevbck Aefx Adqjwr with control bottle and connection plug for the power supply Weight complete approx. 400 kg, connection to 400V 50Hz Very good condition, see pictures Item location is 75053 Gondelsheim See pictures

Condition: used, double-acting hand lever cylinder Storage location: Nattheim Bodpfxszkl T Ie Adqowr

Condition: like new (used), Various inserts for the Maweg gluing press. Bwodpfofl Ikkjx Adqjr Various dimensions, mostly unused. Made of laminated oak.

Condition: reconditioned (used), Year of construction: 1994, Min.-max. wire dia. 6 to 14mm (.236″ to .551″) Flying shear (5) indexing rotary arbors (4) pre-feed rolls 80 to 120 mts/min Max. cutoff lgth: 15 meter track Indexing wire/rod collector 30kW (40HP) AC motor Hydraulick motor: 15 kW (20HP) Operators control panel; 380V- 50 cycle – 3ph PLC Control SIMENES S 5 3 vertical payoff units Bwjdpfx Aefkmr Sodqsr Completely refurbished machine

Condition: excellent (used), MAWEG Gluing Press Bwsdeyyn E Ujpfx Adqor Machine frame inclined at 10 degrees Single-sided loading Horizontal beam with manually adjustable height via hand crank (all clamping cylinders can be adjusted together) Hydraulic cylinders with quick clamping function, infinitely adjustable Manual hydraulic cylinder clamping Pressing force per hydraulic cylinder approx. 2000 kp Hydraulic cylinder stroke 100 mm Clamping depth 100 mm Maximum clamping length: 2800 mm Maximum clamping height: 1800 mm 4 vertical pressing cylinders 2 horizontal pressing cylinders 6 counter-stops Note on used machines: • Errors in technical specifications and prior sale excepted. • Prices quoted are ex-location and are pick-up prices – loading included! • The machines have been cleaned and function tested. • All machines are purchased as seen, without any warranty claims. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)