Used Gesan Dp 75 for sale (22,599)

Condition: good (used), marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block Nsdpfxev Ac Uko Af Sewr -Marking prism: for marking plate, clamping plate, straightening bench ... -Dimensions: 150/75/H130 mm -Weight: 4.8 kg

Condition: excellent (used), PJ.187.100 Chiller Unit cpl. for Suprasetter A52/74/75/105 second-hand, tested Nwedpfx Ajgzbwmjf Sjr All offers are subject to prior sale

Condition: used, LONGITUDINAL SANDER CAMAM MOD. LOL/75/RU - CE RULES - Volt. 380/50 Nwsdpfx Ajwrpzujf Sjr

Condition: used, Description: Temperature test chamber Manufacturer: RS-Simulators / VTS 1200/75/S Temperature range: -75 to +180°C External dimensions: 2.30 x 2.30 x 2.80 m (L/W/H) Test chamber dimensions: 1.10 x 1.00 x 1.00 m (L/W/H) Unit: 2.30 x 1.30 x 2.00 (L/W/H) Average heating rate: approx. 5 K/min (from -40 to +150°C) Average cooling rate: approx. 5 K/min (from +150 to -40°C) Current: 38 A Connection voltage: 3 x 400V/NPE 50 Hz Weight: approx. 2700kg Item condition: used item Contact us if you have any questions Shipping: the stated shipping costs apply to deliveries within Germany Worldwide shipping (shipping costs outside Germany on request) Worldwide shipping (please kindly request shipping costs) The given shipping costs apply to shipping within Germany Sale only to commercial customers without warranty or guarantee. Nwedpfx Aewp Ip Esf Sjr Deviations from technical data as well as errors in the description of the items may occur and are reserved.

Condition: ready for operation (used), functionality: fully functional, Work table 630 x 700 mm spindle sleeve 75 mm Tool holder SK40 Travel X-700 mm; Y-1,000 mm; Z-500 mm Speed range 15 - 1,250 rpm Nwjdpeu Afqxjfx Af Sor

Condition: excellent (used), Attention! Please do not use the pre-formulated query field on Maschinensucher; ask your own questions here. Please fill out the query field yourself. This is the only way to receive an answer. Used container system, 4-container system, 3 available - can be set up on 3 floors or at ground level - Well-maintained condition - Dry and leak-proof - Consists of 4 x 24-foot containers Special features: - 2 large windows Dimensions per container: Length 7.50m x Width 2.50m x Height 2.88m x Weight 3500kg (Total dimensions: 7.50m x 10.00m - 75 sqm) All dimensions are approximate. Equipment per container: - 3 doors - 1 open access - Windows with insulated glazing, - Roller shutters, - Electric heating, - Power outlets, - Lighting, Nwodpfx Afovn I Rzj Sjr - Wall paneling - Ceiling paneling - PVC flooring - Rubber sealing strip - Container clamps Insulation: Roof: 120mm Wall: 60mm Floor: 100mm Sold without lockers! Loading and transport can be arranged. Only serious inquiries will be answered, including: Name, email address, and phone number.

Condition: used, 2 column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punching tool: 2 columns -Punching dimensions: see photo Nwjdpfxsu I Hpys Af Ssr -Dimensions: 180/75/H1100 mm -Weight: 2.0 kg

Condition: used, Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 180 mm -Height: 35 mm -Radius Nwjdpfeciv Tbex Af Sor -Socket: Ø 30 mm -Weight: 5.6 kg

Condition: used, Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate -2x prisms: as a set -Price: for one set -Dimensions: 130/75/H150 mm Nwjdpfx Aed Edfqof Ser -Weight: 10 kg

Condition: used, Bending tool, die, lower knife, lower tool, prism tool -Tool for: press brake -Prisms: 90° 12 mm -Drawing: in the photos Nwodpfjfckflox Af Ssr -Length: 4200 mm (2 x 2100 mm) -Dimension: 20 x 75 mm -Weight: 44 kg

Condition: used, Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter Nwsdpfx Afsciv S No Sor -Outer: Ø 180 mm -Height: 35 mm -Radius: 25 mm -Socket: Ø 30 mm -Weight: 5.8 kg

Condition: used, machine/vehicle number: ZCFA775F50267xxxx, mileage: 93,000 km, Year of construction: 2017, Please contact ATS Norway for more information Please provide reference number upon request: 22105 Nwodpfxex Nuywo Af Ssr Specifications: Not EU approved Mileage: 93,000 km Transmission: Automatic Tires in good condition Engine brake Euro 6, 207 hp Zepro tail lift, 1,500 kg Side door Norka body 3 seats Radio/CD Climate control / AC Ready for delivery Description: 2017 Iveco Eurocargo box truck with only 93,000 km.The vehicle is not EU approved, but the defect report is included.Ready for delivery. Km: 93000 HK: 207 Technical approved: no EU-approved until: 08.09.2025 Own weight: 4950 Total Weight: 7500 Payload: 2475 Width: 255 Length: 800 Euro: 6 Model: 2017 Iveco Eurocargo 75-210 Skapbil. 93 000 km! Gearbox: Automatic

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Nwedpfx Aoiyx Uzjf Ssr Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x addituional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Year of construction: 1997, condition: ready for operation (used), functionality: fully functional, controller manufacturer: Siemens, screw diameter: 75 mm, machine/vehicle number: DE27666, TECHNICAL DETAILS Output: 200–450 kg/h Nwodjx Npbpopfx Af Ssr Screw diameter: 2 x Ø 75.0 mm L/D: 36D MACHINE DETAILS Control system: Siemens Materials: PE, PP, PS, ABS Drive: 143 kW (DC) EQUIPMENT Co-rotating twin-screw Degassing Note: Two screw elements are broken. A side feeder connection or S-cylinder can be offered separately.

Condition: used, Technical data for the connection plate: Manufacturer: META Type: META CLIP The scope of delivery includes: 01x connection plate, used Design: single Material color: sendzimir galvanized Total height: approx. 75 mm Total width: approx. 55 mm Njdpfx Asrntl Ujf Sswr Material thickness: approx. 1.5 mm Weight per unit approx. 0.060 kg Currently available in stock: approx. 300 pcs. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, machine/vehicle number: ZCFA875F40270xxxx, mileage: 71,000 km, Year of construction: 2020, Please contact ATS Norway for more information Please provide reference number upon request: 21347 Specifications: 2020 model Km: approx. 71,000 Automatic Tires (see pictures) 3 seats Interior height: approx. 236 cm Norka box body Side door 1500 kg Zepro lift Rear-view camera Euro 6 Length: 794 cm Width: 255 cm Wheelbase: 418 cm Curb weight: 5040 kg 4x2 207 hp Radio/CD Climate control/AC Description:2020 Iveco 75-210 box truck with only 71,000 km.Comes with a new bumper and step.Norka box body with 1500 kg Zepro lift and side door.Can be delivered on short notice. Km: 71000 HK: 207 Technical approved: no EU-approved until: 21.10.2025 Own weight: 5040 Total Weight: 7500 Nodpjxd Rbdefx Af Sjwr Payload: 2385 Width: 255 Length: 794 Euro: 6 Model: Eurocargo 75-210 4x2 Skapbil Gearbox: Automatic

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x additional temperature controller for down-stream equipment Control board overhauled Nsdpfxsiyya As Af Sewr You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Condition: used, mileage: 227,000 km, Year of construction: 2016, Serial number: ZCFA775F80265xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21673 Specifications: EU-approved until 01.11.2025 2016 model Approx. 227,000 km Automatic Tires (see photos) 1,500 kg Zepro tail lift Side door Norka box body 3 seats Euro 6 Length: 810 cm Width: 255 cm Wheelbase: 418 cm Curb weight: 4,940 kg 4x2 207 hp Internal length: approx. 613 cm Internal height: approx. 235 cm Reverse camera Radio/CD Air conditioning (A/C) Description:Iveco 75-210 two-axle box truck from 2016.New brake discs, clutch parts, and a front mirror were replaced during the service. last year.Equipped with a Norka box body and a 1,500 kg Zepro lift.Can be delivered on short notice.See video for more details. Njdpfx Asxq U T Djf Sowr Km: 227000 HK: 207 Technical approved: no EU-approved until: 01.11.2025 Own weight: 4940 Total Weight: 7500 Payload: 2485 Width: 255 Length: 810 Euro: 6 Model: 2016 Iveco 75-210 4x2 skapbil m/ lift Gearbox: Automatic

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Nsdpfjiyyndjx Af Sowr Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. Nsdpfxsiyynwe Af Sswr More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Year of construction: 2025, condition: new, Stock No. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Njdpfx Aod Hqa Iof Sswr Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Nodpfx Afoi Dtbij Sowr Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant. Trail-run with your material-mix possible, darte and details uopn request.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Nwsdpfxei Dtbue Af Ser Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer Nedpfxoi Dtb Aj Af Sewr > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Condition: new, Year of construction: 2025, operating hours: 2,846 h, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Screw diameter 73 mm Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs Nsdpfei Dtbqex Af Sewr > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant.