Used Gesan Dp 75 for sale (7,881)

Condition: good (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 08/2027, total width: 970 mm, total length: 680 mm, total height: 1,700 mm, input frequency: 50 Hz, year of last overhaul: 2022, electrical fuse: 16 A, Planetary mixer Boku P 75 Power adjustment – stepless Ibjdozfxz Ujpfx Ad Njc LED display, with timer 1 stainless steel bowl, 75 liters & 1 beater electric bowl lift connection 400V, 16A CEE plug Dimensions: 970 x 680 x 1700 mm, W x D x H Used machine Visit our large showroom!

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 26010607, functionality: fully functional, input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 5,900 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 5,900 mm, workpiece width (max.): 1,600 mm, workpiece height (max.): 280 mm, number of axes: 5, number of slots in tool magazine: 20, controller manufacturer: SIEMENS SINUMERIK, total height: 3,200 mm, total length: 11,000 mm, total width: 4,700 mm, overall weight: 10,000 kg, table length: 5,900 mm, table width: 1,600 mm, Equipment: CE marking, MAKA PE 75 5-axis machining center – in good working order and ready for use. The machine was used for the production of wooden stairs. Maximum spindle speed: 24,000 rpm Tool holder: HSK-F63 Number of milling spindles: 1 Vertical drilling spindles: 16 Ibjdpjzwcfzsfx Ad Njc Horizontal spindles in the X-axis: 2 Horizontal spindles in the Y-axis: 2 Vacuum pump: 130 m³/h Number of vacuum pumps: 1 Number of traverses/consoles: 8 Pneumatic pressure: 6 bar A-axis: ±90° / 180° C-axis: 540° Rapid traverse X/Y: 60 m/min Rapid traverse Z: 24 m/min Electrospindle cooling: liquid Table: traversing/console type Application: wood processing / stair production.

Condition: used, TECHNICAL DETAILS Iedpfx Adeu D I H Sj Nsbc - Volume : 4.3 [l] - Timer : 0-120 [min] - Temperature setting : 0-100 [°C]

Condition: used, Electric motor, three-phase motor Iedpfx Adoglmk De Njbc -Manufacturer: ATB, electric motor 132 M type ERY 7.5/4-75 S -Power: 6.8 kW -Speed: 1455 rpm -Shaft: Ø 38 x 80 mm -Construction: B3 -Protection class: IP54 -Dimensions: 480/320/H265 mm -Weight: 72 kg

Condition: used, Thermoplastic polyurethane elastomers, pressure hose, air hose, plastic hose, barrier fences -Snow fence: 2.25 m wide Ijdpfjfdmhajx Ad Nobc -2 rolls: a 50 m -Price: complete -Dimensions per roll: Ø 350/2270 mm -Total weight: 230 kg

Condition: used, Double end profiler, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 7.5 kW -Speed: 2860 rpm -Voltage: 380 V -Shaft holder: Ø 40/80 mm -Price: per piece -Number: 2 pieces -Dimensions: 675/250/H255 mm Ijdsd Riw Iopfx Ad Nobc -Weight: 98 kg

Condition: used, Single-column – Eccentric press EBU, Type 75 SKU Machine No. P 4598462, Year of manufacture 1962 Pressing force 75 tons Reach 300 mm Table area 800 x 620 mm Die opening 325 x 225 mm Slide area 470 x 180 mm Tool holder bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Slide adjustment 80 mm Maximum installation height approx. 420 mm Stroke rate 60 + 105 strokes/min Motor power 4 kW Power supply 380 Volts, 50 Hz - Pneumatic clutch-brake combination EBU - Overload protection with shear plate in the slide - Tool monitoring system UNIDOR, Type APS MINI - Mechanically driven strip feed with strip straightener OSTERKAMP, Type ZPN 200/350 - Strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds through 2 V-belt stages on the gear pre-stage - Two-hand operation - Simple work area guard that can be swung open - Table height adjustment in the lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and operator panel for tool monitoring located beside the machine - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons Good condition Isdjdzqltspfx Ad Nobc

Condition: ready for operation (used), functionality: fully functional, mileage: 177,500 km, power: 140 kW (190.35 HP), first registration: 02/2008, fuel type: diesel, empty load weight: 4,440 kg, overall weight: 7,500 kg, axle configuration: 4x2, color: white, gearing type: automatic, emission class: euro4, suspension: steel, number of seats: 3, Year of construction: 2008, Equipment: ABS, cabin, Small garbage truck: - Isuzu - Q75Y.07 (NQR smoother; NPR75) - EZ: 05.02.2008 - 177.500Km - Unladen weight: 4,440kg; permissible GG: 7,500kg - 560cm long - 4 cylinder diesel engine, 5193ccm; 190PS; Euro 4 - automatic gearbox - Electronic tachograph - radio - 3-seater - el. FH Waste body: - Provence Benne / Faun - BOM M+XL TH LC SAD MP - 6m³ aluminum container - Tipper with hydraulic support legs - Loading edge: 160cm - Lifter - Press Municipal vehicle from 1st hand Receive all new vehicles by email - subscribe to our NEWSLETTER! Iedpsumvz Ujfx Ad Njbc Errors and typing errors possible, subject to prior sale!

Condition: ready for operation (used), Bauknecht ATB 18,5/2-75 Motor,used, strong signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Pleasequire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Ibjdpfx Aour A Tnod Njc

Condition: good (used), Year of construction: 1999, Offer 22648 Technical data: - Sanding belt dimension approx. 2000 x 50 mm - grinding belt speed approx. 30 m/min Ibodpfjp H Tvxex Ad Noc - contact wheel B 50 / D 300 mm - drive wheel B 50 / D 200 mm - adjustable belt centering - drive 400 V / 2880 rpm / 5,5 kW - space requirement approx. W 500 x H 1000 x D 1400 mm - weight approx. 80 kg

Year of construction: 2004, condition: good (used), machine/vehicle number: 0441057, Offer 23300 Technical data: Isdpfxepug D Eo Ad Nobc - Sanding belt dimension 75 x 2000 mm - surface grinding opening 75 x 300 mm - support vice - angle adjustable 90° - 30 ° - grinding belt speed 15 + 30 m/sec. - possible contact rolls Ø 20 - 76 mm - contact roller length 75 mm - drive 400 V / 2,2 / 3 kW - drive speeds 1440 / 2880 rpm - 1 piece contact roll 48 mm - space requirement approx. W 800 x H approx. 1000 x D 1300 mm - weight approx. 250 kg

Year of construction: 2010, condition: used, Gostol DP 10-F-OR-2900 bowl lift suitable for Escher bowls Ijdoiv Alnspfx Ad Nebc lifting height approx. 290cm total height 420cm dough scraping unit safety cage max. 1000 kg lifting weight year of build 2010 pictures BEFORE reconditioning

Year of construction: 2010, condition: used, Gostol DP 10-F-OR-2900 bowl lift suitable for Escher bowls lifting height approx. 290cm total height 420cm dough scraping unit Ibjdpfeiv Alrsx Ad Njc safety cage max. 1000 kg lifting weight year of build 2010 pictures BEFORE reconditioning

Year of construction: 1979, condition: reconditioned (used), Machinetype: wire nail press Ibsdpfx Adeh Hnqts Nec Make: WAFIOS Type: N75 Constr. year: 1979 diameter range: 2,0-3,8 mm nail length: 20-80 mm output – pieces/min: 440

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Ibjdpsi Dtbijfx Ad Noc Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant. Trail-run with your material-mix possible, darte and details uopn request.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Demonstration line, Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing Ibedpji Dtb Aefx Ad Noc > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Condition: ready for operation (used), Control Techniques CD II 75 frequency inverter, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Ibjdsi D Umzopfx Ad Njc

Condition: ready for operation (used), GMN TSE 75 cdu x 200/30000 high-speed spindle, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Iodpfji Eaa Rox Ad Nobc

Condition: ready for operation (used), Heldt & Rossi Series 806 (807/2) DC servo amplifier, Type 500-75, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Iedpfei Ea D Eex Ad Nebc

Condition: new, Hilscher KPO 104-DPM Profibus-DP module, unused, in opened original packaging, 100% functional. Isdpfxji Ea I No Ad Nobc

Condition: used, Year of construction: 2005, x-travel 750 mm y-travel 560 mm z-travel 600 mm Control HEIDENHAIN iTNC 530 total power requirement 70 kW weight of the machine ca. 11.000 kg dimensions of the machine ca. m D E C K E L M A H O (Germany) Vertical CNC Machining Centre with high speed linear drives in 3 Axis and in double column design for high precision work Model DMC 75 V LINEAR Year 2005 _____ Working range: Longitudinal stroke X Axis 750 mm Vertical stroke Z Axis 600 mm Cross stroke Y Axis 560 mm Table clamping size 950 x 650 mm Max. Table load 1.000 kg Max. height of workpiece 600 mm Tool holder Cone HSK 63 Spindle (KESSLER) speeds 18,000 rpm Torque, max. 86/130 Nm Spindle run-up time / stop time 3.2 sec Feeds / Quickfeeds, X, Y and Z Axes max. 90,000 mm/min Feed force 11.000/9.500 N Axis acceleration, X / Y / Z Axes 15 / 12 / 18 m/s Spindle drive 25/35 kW Total electrical load, approx. 75 kW - 400 V - 50 Hz Weight, approx. 11.000 kg Accessories / Special Features: This machine is very interesting because of the very stable double Column Portal Design and with the modern linear technology for fast and powerful high precision work. * HEIDENHAIN modern CNC Control System Model iTNC 530 in 3 axes, with all the usual options, cycles and sub programmes. * Table moves only in x axis and allows a comfortable loading of heavy workpieces * 30-position disktype tool magazine for max. tool Ø 100, 140 and 200 mm x max. length 300 mm. Max. weight 10 kg. Cut-to-cut time 6 sec. Pick-Up by main spindle. * BLUM tool-breakage control, Blum Receiver for RENISHAW –Head, no head available. Ibsdpst Hw Trefx Ad Noc * Double linear motors ensure very fast feed motions and strong feed power, equipped with own cooling system. * KESSLER Milling Spindle, Liquid-cooled, steplessly programmable up to 18.000 rpm * Completely covered working area with 2 sliding doors, one with spin-type bull-eye. * KNOLL Coolant device with scraper-type chip conveyor and pressure pomp. * Spindle working hours approx. 23.000 h Condition : Very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Gear motor, electric motor -Speed: 75 rpm -Power: 0.75 kW -Construction: B3 angle -Diameter shaft: 12 mm -Protection class: IP 65 -Dimensions: 250/160/H120 mm Ibsdpfxoct Tyuo Ad Njc -Weight: 4.75 kg

Condition: good (used), Heating fan, mobile heater, gas heater, gas blower Ibjdeb A S Daspfx Ad Nec -Power: adjustable 50 kW -Consumption: 2-4 kg/h -Connection pressure: 0.35-3.0 bar -Air flow rate: 1570 m³/h -Weight: 32 kg

Year of construction: 2008, condition: like new (used), MULLER mobile lifting column/jib with 1/2 rotation of the tank Load capacity 150 Need to be connected to lift Total weight 490kg Ijdpfx Asv Dtihed Nobc Sold with 5 tanks: * 1 tank of 100 liters * 2 tanks of 200 liters * 1 tank of 150 liters * 1 tank / hopper, with valve for powder, of 90 liters

Condition: good (used), Year of construction: 1993, Vecoplan drum chipper VTH 75 / 22 / 5. Infeed dimensions: width 750 mm, height 220 mm. Motor: 75 kW. Ibedsxr Tp Hopfx Ad Noc