7
*Please note price is excluding vat and transportation cost.
*Please note price is excluding vat and transportation cost.
Technical specifications
Year of manufacture 2008
Series 494
Engine hours 3281
Road speed (km/h) 40
Drum hours 2311
2 or 4 Wheel drive 4
Knive-Drum 24
Amount knives installed 12
Configuration Gras
Kernal Processor type Saw tooth
Engine brand Mercedes-Benz
Engine type L6
Engine Power (KW) 458
Front Tires Size 900/60R32
Rear Tires Size 600/65R28
Drum type V-max
Options
Bzlgpk...
13
Operating hours:5264 _____ John Deere round baler, with variable bale size V461M, air brakes, bale ramp, PickUp 2,20m, sensing wheels, 13 knives, PTO speed 540 rpm, BaleTrack monitor, CoverEdge net binding, ex demo machine,,Storage location:48480 Spelle
Bzsj78blas
3
Bale ejector, net binding, pick-up, cutterbar, top hitch (eyelet) _____ CLAAS Variant 385 RC round baler with variable bale chamber - Roto Cut with 14 knives - pick-up width 2.10 m - wide-angle PTO shaft
Svgv8s
8
1
Kirpy -full harvest with foil guide new price 118000Euros
B3n2vgmv2d
Machine was not used much and comes from an insolvency
2
on-board computer ,air brake
Operating hours:1, number of knives:15, bale size (width):2350, net binding, PickUp, wide angle cardan shaft, variable chamber, single axle _____ Pick-up AB: PU: 5 row, 2350 mm wide Tasträd.Pick-up: Feeler wheels: 16x6 -6 variable round baler net binding rotor cutter with 15 knives and lowerable knife floor pneumatic brake system bale ramp terminal and holder,Storage location:18276 Mühlengeez
Yqbinyrz
1
*Please note price is excluding vat and transportation cost.
*Please note the Repair Recommendations.
Technical specifications:
Stock number 21206
Year of manufacture 2005
Series 492
Engine hours 3663
Road speed (km/h) 25
Drum hours 2559
2 or 4 Wheel drive 4
Knive-Drum 20
Amount knives installed 20
Configuration Gras
Kernal Processor type Saw tooth
Engine brand Mercedes-Benz
Engine type L6
Pwg7x
Engine Power HP 389
Engine Power (KW) 286
Front Tires Brand Michelin
Rear Tires brand Good Year
Fron...
9
_____ Bale wrapper, for square bales, fit for: from 50*80 cm - 140*120cm, up to 2,00 m length, own oil supply, electr. operation,,storage place:48480 Spelle
3gpwpo
3
Air brake
Buvmnfizxe
Operating hours:606, Bale ejector, Knife guard, Net binding, PickUp, Roller hold-down, Cutting unit, Wide angle cardan shaft, Central lubrication, Variable chamber, Single axle, ISOBUS, Top hitch (eyelet), Grass device / silage equipment _____ Comprima F 155 XC Demonstration baler 100 bales Technical data Round baler with semi-variable bale chamber and cutting unit Length 4.700 mm, width 2,610 mm, height 3,150 mm Track 2,150 mm Bales Ø 1,250 - 1,500 mm PTO speed 540 rpm Requ...
15
15
Type: Harvester
Field of application: Forestry
S7zdxbjv
Technical condition: good
Visual appearance: good
Please contact Vink Machinery for more information
Tyre condition: 70/70/70/70/70/70
Ponsse Ergo 6W Harvester felling head
* 2013
* 4325 pump hours
* 8363 crane hours
* 13526 total hours
* In very good condition
* Very complete
4
For further technical data please contact the seller.
Prrrn
1
8
_____ 640X Cutterbar, 2 mechan. driven side knives, 2 short stalk dividers, holder for side knives, 12 m working width, fits on: John Deere S690i combine, together with: TAM cutterbar wagon, SWW 42FT HL , year 2015 SN: WEGTP28F3FAAA2328,storage:18573 Altefähr
Pplur
3
Operating hours:662, bale counter _____ Krone EasyWarp 150 demonstration unit Three-point bale wrapper with one wrapping arm Length: 2,349 mm, Width: 1,430 mm, Height:2,388 mm Wrapping arm speed: up to 36 rpm Bale diameter: 1,000 - 1,500 mm Bale weight: max. 1,600 kg Hydraulic connections required: 1x EW and free return (optional load-sensing connection) Oil flow: from 22 L/min Attachment Three-point attachment Cat. II Wrapping device Hydraulically swivelling roller arms Single wrapping arm (rev...
13
Type: Jaws
Do9eqffl
Applicable material: Corn
Number of rows: 6
2008 New Holland FI430 (Kemper 445) 6 row corn header fits New Holland FR series, very nice good working header including PTO shaft.
10
8
For further technical data please contact the seller.
Fe90sob
9
On board computer ,Air brake
Operating hours:1, Number of knives:26, Number of bales:3900, Bale ejector, Twine binding, Knotter cleaning, Steering axle, PickUp, Roller hold-down, Cutting unit, Tandem axle, Weighing device, Wide angle cardan shaft, Central lubrication _____ Krone 1290 HDP XC, Year of construction 2020, , 3900 bales, 6 double knotters, Autom. Central lubrication, tandem axle steered, 620/50 R22.5 /, cardan shaft, cutting unit 26 knives, electric bale length adjustment, knotter cle...
15
For further technical data please contact the seller.
Cqel3dbm
4
_____ tyres 500/50-17 17 knives 28000 bales,storage location:16866 Gumtow OT Vehlow
Bwov7ac2xk
10
Applicable material: Grass
Working width: 300 cm
2007 Claas PU300HD 3 meter gras pick up fits Claas 491 and 492 series, nice good working header which is been inspected and tested, including pto.
B002rhcawt
1
9
For further technical data please contact the seller.
Bzksmpmir8
15
Operating hours:4799, bale size (max. diameter / height):120 _____ bale size: 1,00-1,50, cutting unit: 26 knives, hydr. knife control, binding: net and film, video system in bale chamber, air brake, operation: computer, pick-up: 2,15m, cardan shaft, bales: 4799 pcs.,,storage:48480 Spelle
Plgfj
9
8
Applicable material: Grass
B002k8zkr8
Working width: 300 cm
John Deere 630A 3 meter grass pick up, fits John Deere 6000 and 7000 series, including pto
8
Operating hours:25, Number of knives:17, Cutterbar _____ Krone Comprima V 180 XC - Netzwichkler - Gelenkwelle Nockenk. 80 Grd. - With towing eye 40/50 - Hydraul. Bodenabenkung - Schneidw. PU 2150, 17 knives - tires 500/55-20 12 PR - Autom. chain lubrication - E-axle w. Druckl.-Bremse - comfort, without terminal - with bale kicker approx. 25,000 bales chains and scribers worn rolling floors still original,Storage:Matthes Gerhard
Pnee8sg
7
For further technical data please contact the seller.
Bzkriw9fog
15
Operating hours:21000 _____ X-treme baler, baler-wrapper combination, semi-variable round baler, bale size: 1.25 to 1.50 m, cutting unit for 26 knives, hydr. knife switching, tandem axle, steered, 2-arm wrapper, 2.10 m pick-up, roller hold-down, K80 ball hitch, operation: CCI 200 terminal,,Storage location:48480 Spelle
Ep8jjg33e
5
8
Applicable material: Grass
Working width: 300 cm
Pwtob
2008 Claas PU300HD 3 meter pick up, nice good working header which is been inspected and tested.
4
on-board computer ,air brake
C3zuxzr3
Operating hours:16272, Bale size (max. diameter / height):210, Number of knives:26, Net binding, Cutting unit, Tandem axle, Wide angle cardan shaft, Central lubrication, Variable chamber _____ KRONE round baler Comprima V 210 XC in the following version: - Net wrapper - Cardan shaft Nockenk. 80 - Towing eye 40/50 - Hydraulic floor lowering - Cutterbar PU 2150, 26 knives - Tyres 500/50-17 10 PR - Automatic chain lubrication - Tamdemaxle with air brake - Comfo...
4
For further technical data please contact the seller.
9q93miz
15
8
_____ suitable for: John Deere 7750i forage harvester,,3,00 m working width,,storage location:48480 Spelle
Exruuk2uw
11
8
Applicable material: Grass
Working width: 300 cm
B002nut7gh
1997 John Deere 630 3 meter grass pick up, fit's John Deere 6000 and 7000 series, header is in good working condition
3
5
For further technical data please contact the seller.
Bznnuqm23e
15
Beet harvester AGRIFAC Big Six + Header 2.90m
- year of production - 2008
- mileage - 6000mth
- empty weight - 24,000 kg
- engine power - 460 hp
- 6x6x6
- header included, width 2.90m
- all swivel wheels
- hydrostatic drive
- tank capacity 26t / 30m3
- comfortable cabin
- joystick control
Djmyojz
- on-board computer
- regularly serviced
- 1 owner
- not crashed
- technical and visual condition: GOOD
15
Operating hours:4533 _____ Large baler L1524, Bale size: 70 x 1,20 m, Swinging support wheels for pickup, Additional driven feeding auger, MaxiCut HC 23 knives, Ejection for the last bale, PTO 1 3/8 6 teeth, Ball head coupling - 80 mm ball at the bottom, Steerable tandem axle with pneumatic brakes, Low friction plates in the prepress chamber, Electrical adjustment of the bale length, Bale deposit sensor, Moisture sensor, Rotating beacon Operation via ISOBUS, no display available, LED working lig...
15
*Please note price is excluding vat and transportation cost.
Technical specifications
Year of manufacture 2013
Series 492
Engine hours 1924
Road speed (km/h) 40
2 or 4 Wheel drive 4
Knive-Drum 28
Amount knives installed 14
Configuration Gras
Kernal Processor type Saw tooth
Engine brand Mercedes-Benz
Engine typeL6
Engine Power (KW)315
Bzlefdpw7s
Drum type Standard
6
Applicable material: Grass
Jxlbzy
Working width: 300 cm
2011 New Holland FP273 3 meter grass pick up fits New Holland FR series, including PTO, nice good working pickup which is been inspected and tested, call us today or visit our website for more information and pictures
3
