Used Gesan Dvs 410 for sale (3,352)

Condition: excellent (used), CATALOG NUMBER 7479 Technical data: - shaft width: 410 mm - 4-knife shaft (TERSA) - noise reduction comb - shaft guard - table length: 2610 mm - longer infeed table: 1435 mm - cast iron tables - both tables adjustable - original cast iron tiltable fence - brake - extraction port diameter: 115 mm - motor: 4 kW - dimensions (LxWxH): 2610x960x1110 mm - weight: 578 kg ADVANTAGES – Made in Italy – 4-knife shaft – brake Gcjdpeuwp Ecofx Ad Aja – noise reduction comb – longer infeed table – unpainted – used surface planer, in very good condition, original DTR documentation Net price: 21,900 PLN Net price: 5,200 EUR (exchange rate 4.2 EUR) (Prices may change depending on significant exchange rate fluctuations)

Year of construction: 2003, condition: good (used), Strokes 560x 410 x 510 mm, table 900 x 410, magazine 30 tools, spindle 12.000 rpm, chip conveyor Gcedpfxeiwkhks Ad Aja

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 4,500 kg, fuel type: diesel, tank capacity: 700 l, color: beige, power: 322.15 kW (438.00 HP), output current: 591 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 328 kW (445.96 HP), nominal power (apparent): 410 kVA, continuous power: 269 kW (365.74 HP), continuous power (apparent): 370 kVA, total length: 4,463 mm, total width: 1,606 mm, total height: 2,500 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Doosan, type of cooling: water, AVS diesel generator DW 370 DO2 15 AK14A PRP power: 296 kW / 370 kVA ESP power: 328 kW / 410 kVA Engine: Doosan P158LE-1 Gcsdpswu Ectsfx Ad Aja Emission stage: 2 Speed: 1,500 rpm electronic speed governor Operating voltage: 24 V Cooling: water-cooled Generator: Mecc Alte ECO 40 1S/4 Voltage: 400 V Voltage regulator: DSR1 Control panel: DSE 7320 Battery charger: 5 ampere Type: Canopied unit; weatherproof, soundproofed • Emergency stop switch • Radiator with mechanical fan • Base frame construction with integrated fuel tank (700 L) and vibration dampers • Voltage and frequency regulation according to ISO 8528-5 • Unit suitable for stationary operation only Please note that these units are not approved for mobile use in accordance with current EU regulations. The units are sold as B-grade goods. B-grade means the units may have visual imperfections such as flash rust or rust on the housing. These do not affect the functionality or performance of the units in any way. By accepting this offer, you expressly acknowledge the described characteristics and corresponding condition of the units.

Condition: excellent (used), Catalogue number 7739 Gcsdpfxoxbp Ane Ad Aja TECHNICAL DATA SURFACE PLANER: - shaft width: 410 mm - 3-knife cutterblock - sound-dampening comb - shaft guard - adjustable angle guide fence - table length: 2060 mm - both tables adjustable THICKNESSER: - max material thickness on thicknesser: 240 mm - thicknesser shaft guard *from above: - anti-kickback fingers - serrated, sprung feed roller - pressure bars - planing cutterhead - pressure bar - smooth outfeed roller - 2 adjustable rollers in lower table - main motor: 5.5 kW - electric brake - electric table height adjustment (up/down) - dust extraction port diameter: 120 mm - dimensions (L/W/H): 2060x970x1150 mm - weight: 660 kg ADVANTAGES – Italian-made – sound-dampening comb – not repainted – in perfect condition – used planer-thicknesser Net price: 22,900 PLN Net price: 5,450 EUR (calculated at 4.2 PLN/EUR) (Prices may fluctuate with larger exchange rate changes)

Condition: used, Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 2 shelves -Width: 935 mm -Depth: 410 mm Gcedpfxsx D T Uye Ad Aoa -Height: 2010 mm -Door: lockable, without key -Weight: 59 kg

Year of construction: 2011, condition: ready for operation (used), Movement Gcsdpox D Etuefx Ad Asa X-Axis Movement 6000 mm Y-Axis Movement 1200 mm This 3-axis IMA BIMA/410/120/600 woodworking machine was manufactured in 2011. It features a working depth of 1200 mm and a working width of 6000 mm, which can be divided into two working areas of 2400 mm each, plus a safety area of 1200 mm. With the "long workpiece" setting, the full working width can be utilized. A great opportunity to buy this IMA BIMA/410/120/600 woodworking machine. Contact us for further details regarding this woodworking machine. Application Types CNC Wood Machining

Condition: used, Year of construction: 2007, Technical details: pressure: 225 t chamfer lenght: 4100 mm height of stroke: 400 mm throat: 250 mm dayligth: 917 mm total power requirement: 30 kW dimensions of the machine ca.: 5500 x 2270 x 3310 mm Gcsdox A S Rdjpfx Ad Asa weight of the machine ca.: 22 t

Condition: used, This listing is for a Varian Autosampler Model 410 unit on it's own. The Varian ProStar 410 HPLC Autosampler has variable injection volumes and automixing/autodiluting. The ProStar 410 is perfect for laboratories with changing needs. It provides flexible operation without sacrificing reliability or performance. Multiple injection modes for flexibility, ease of use, and precision. Full loop filloverfills the sample loop for maximum precision. Partial loop fill allows easily programmed variable injection volumes. Microliter pickup withdraws the exact amount to be injected without sample loss. The Varian ProStar 410 AutoSampler offers the best of both worlds. It is intelligent for research applications yet rugged enough for routine quality control work. With Pressure Assisted Sampling Aspiration (PASA), the Varian 410 ProStar AutoSampler applies pressure within the vial while the sample is withdrawn by a high-resolution syringe. Air bubbles and in-vial vacuum problems are eliminated resulting in excellent reproducibility. Flexibility with multiple injection modes Optimal performance with integrated column oven Biocompatible and sample cooling options available Specifications: Standard sample tray 84 x 1.5 mL vials with 3 x 10 mL vials Optional sample trays 96 x 2.5 mL vials or 24 x 10 mL vials Dispenser unit 50 µL syringe standard; 1000 µL or 2500 µL syringes, optional Injection volume 1 to 5000 µL with preparative option up to 10 mL Injection methods nine methods in memory Needle wash integrated, programmable large reservoir Vial detection Yes Reproducibility Full Loop: < 0.3% RSD Partial Loop: < 0.5% RSD Microliter Pickup: < 1.0% RSD Carryover < 0.05% Optional sample cooling 4°C to 15°C programmable Can be refurbished on request, refurbishment not included in price. Gsdpfx Asxzh Amjd Ajca

Condition: good (used), Year of construction: 2018, Sepamatic 410 Separator Sepamatic 410 is used for separating raw meat material from waste components, such as cartilages, veins, skin and bones. This machine is used for increase grade and separating raw meat material for meat mechanical processing and meatbone residue. Raw material retract between high-elastic clamping band and steel perforated drum circling together and go through brief pressing operation. Hard, big and agglutinate parts stay outside the drum but softened parts are pushed inside the drum through the holes. Productivity depends from the raw material is used, clamping pressure and size of the holes of drum. Technical details: Capacity: 200-800 kg\h Drum :  1.3 and 5 mm Power consumption: 2,2 kW Dimensions (LxWxH): 1800 x 750 x 1350 mm Weight: 300 kg Gsdpfx Adju Nhdnj Aoca Year: 2018

Condition: refurbished (used), Centerless grinding machine ROSSI MONZA 410 Monzesi Grinding wheel width 200mm Grinding wheel diameter 400 pneumatic compensation auto plunge overhaul - retrofit - PLC under power in our warehouse in Gussago BS (Italy) Centerless grinding is a procedure for grinding cylindrical bodies and is used for the mass production of rollers cylinders, tapered rollers, jet needles, pump pistons, hydraulic sliders, crosses, tips, etc. During centerless plunge grinding (plunge grinding), the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, grinding wheels and setting discs have a negative workpiece profile to work which is given to them with the aid of a tool. Centerless through-feed grinding or through-feed grinding and longitudinal grinding: workpieces to be machined proceed continuously with axial feed through the grinding gap. Gcjdpfjwf Rqdox Ad Aja Grinding wheel width: 200 Grinding wheel diameter: 400

Condition: ready for operation (used), Year of construction: 1998, Brand: Schelling Model: FL430/410 Machine no.: 211.178 Year of manufacture: 1998 Gcedpexf Idxefx Ad Asa With front and rear feed Technical data Saw length 4200 Pusher 4100 Setup 7×10 m (length×depth) Lifting table 6.5 tonnes

Year of construction: 1997, condition: ready for operation (used), Technical Specification Max. Cutting Length 4200 mm This SCHELLING FL 430/410 panel saw was manufactured in 1997. It features a cutting length of 4200 mm, a slider of 4100 mm, and a saw blade diameter of 450 mm. The saw blade projection is 130 mm, and it can handle package heights up to 120 mm. Powered by a robust 31 kW motor, this machine offers reliable performance for your cutting needs. Contact us for more information about this machine. Application Types Sawing (Wood) Godpfx Asx D D S Njd Asca

Condition: good (used), Clamping plate, marking plate, measuring plate, measuring table, surface plate, marking plate -Clamping plate: surface plate with support ribs Gedpfxjwyub As Ad Asca -Length: 410 mm -Width: 405 mm -Plate thickness: 45 mm -Dimensions: 410/405/H100 mm -Weight: 66 kg

Condition: new, Year of construction: 2025, 3-jaw chuck 200 mm Max. turning diameter over bed 410 mm Turning diameter over cross slide 255 mm Turning diameter in bridge recess 580 mm Center distance 1000 mm Gcedsxdbxyopfx Ad Aja Center height 205 mm Top slide travel 140 mm (accurate 0.02 mm) Cross travel 210 mm (accurate 0.02 mm) Longitudinal travel 750 mm (accurate 0.2 mm) Bed width 250 mm Spindle bore 52 mm Spindle nose D1-6 CAMLOCK Spindle taper MK6 Lathe post dimensions 100 × 100 × 32 mm Max. tool dimensions 20 × 20 mm Spindle speeds: 16 ranges, 45 – 1800 rpm Spindle speed range: 45, 70, 90, 108, 140, 165, 215, 255, 330, 385, 510, 585, 770, 900, 1170, 1800 rpm Metric thread (42) 0.2 – 14 mm/rev Inch thread (42) 2 – 72 TPI Modular thread (18) 0.3 – 3.5 mm D.P. thread (21) 8 – 44 DP Longitudinal feed range (17) 0.05 – 1.7 mm/rev Cross feed range (17) 0.025 – 0.85 mm/rev Tailstock quill diameter 50 mm Tailstock quill stroke 120 mm (accurate 0.02 mm) Tailstock quill taper MK4 Main motor power 2.2 / 3.3 kW Coolant pump power 90 W Dimensions (L × W × H) 2050 × 900 × 1650 mm Weight 1600 kg

Condition: good (used), mileage: 968,789 km, power: 300 kW (407.89 HP), fuel type: diesel, color: white, axle configuration: 8x2, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, Year of construction: 2008, Equipment: ABS, air conditioning, parking heater, trailer coupling, = Further Options and Accessories = - Aluminum fuel tank - Electric windows - Speed limiter - Sun visor - Auxiliary heater - Power take-off (PTO) - Power take-off (PTO) - Towing hitch = Further Information = General information Year of manufacture: July 2008 Axle configuration Front axle 1: Max. axle load: 9,000 kg; Steered; Tyre tread left: 50%; Tyre tread right: 50% Front axle 2: Max. axle load: 9,000 kg; Steered; Tyre tread left: 50%; Tyre tread right: 50% Rear axle 1: Max. axle load: 11,500 kg; Tyre tread left: 50%; Tyre tread right: 50% Rear axle 2: Lift axle; Max. axle load: 7,500 kg; Steered; Tyre tread left: 50%; Tyre tread right: 50% Weights Curb weight: 21,530 kg Payload: 15,470 kg Gross vehicle weight (GVW): 37,000 kg Functional Crane: Yes Godpfxsw H A Hyo Ad Asca Body brand: Hiab 477 E-6 Hipro Jib 100 x-4 CE marking: yes Condition Technical condition: good Visual condition: good Financial information Price: On request Further information For more information, please contact John de Koning or Mark de Koning.

Condition: used, Centerless grinding machine ROSSI MONZA 400 Grinding wheel width 200mm Grinding wheel diameter 400 pneumatic compensation under power in our warehouse in Gussago BS (Italy) Centerless grinding is a procedure for grinding cylindrical bodies and is used for the mass production of rollers cylinders, tapered rollers, jet needles, pump pistons, hydraulic sliders, crosses, tips, etc. During centerless plunge grinding (plunge grinding), the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, grinding wheels and setting discs have a negative workpiece profile to work which is given to them with the aid of a tool. Centerless through-feed grinding or through-feed grinding and longitudinal grinding: workpieces to be machined proceed continuously with axial feed through the grinding gap. Grinding wheel width: 200 Gcjdpfx Aeuyuvfsd Aoa Grinding wheel diameter: 400

Condition: new, Year of construction: 2025, MEBAeco Ready-made individuality Central and easy to use control panel Movable blade guide arm, adjustable to suit material width Combined precise saw blade carbide-roller guidance Saw blade tension by torque wrench Coolant equipment can be combined with MEBA micro-coolant system MEBA power package Lifting and lowering of the saw frame with a Gsdpfebzll Hsx Ad Ajca frequency regulated lead screw drive, with automatic cutting pressure and feed regulator. Rapid lowering of the saw frame via button until material edge Powerful, frequency-controlled saw blade drive Hydraulic material full-stroke clamping Minimum speed- and saw blade control on the bandwheel Ergonomic panel based on „Windows CE“ system software Stepless height adjustment by height sensing Automatic material feed: Compact design for short sections and flexible infeed shuttle system for almost any length available Electric mitre swivelling by servo motor

Condition: good (used), Year of construction: 1991, functionality: fully functional, - Normal pressure force kN (Mp) 160 (16) - Maximum achievable pressure kN (Mp) 200 (20) - Spindle diameter 60mm - Spindle pitch per revolution 32mm - Number of guide columns 2 - Clear width between columns 410mm Gsdjvnbrxjpfx Ad Ajca - Max. clear installation height between table top and ram 270mm - Ram stroke 210mm

Condition: used, Site power distributor, site power meter, connection cabinet, crane distributor, distributor cabinet, power distributor, crane connection cabinet -Distribution box: made of VA -Dimensions: 410 x 400 mm -Depth: 165 mm Gedpfx Asfgyf Njd Ajca -Price: per piece -Number: 2 pieces -Weight: 10.5 kg/piece

Condition: used, Gear motor, electric motor, electric gear motor, worm gear motor -Manufacturer: Eberhard Bauer, gear motor -Type: unfortunately no type designation approx. 5.5 kW -Speed: 56 rpm Gjdpst Hac Njfx Ad Aeca -Power: rpm -Shaft: Ø 65 x 120 mm -Design: B3 -Dimensions: 930/410/H375mm -Weight: 212 kg

Condition: used, Site power distributor, site power meter, connection cabinet, crane distributor, distributor cabinet, power distributor, crane connection cabinet -Distribution box made of: VA Godpfxsfgyf Dj Ad Aeca -Dimensions: 410 x 400 mm -Depth: 165 mm -Weight: 10.5 kg

Condition: good (used), mileage: 1,075,731 km, power: 301 kW (409.25 HP), first registration: 01/2015, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: grey, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,180 mm, total width: 2,550 mm, total height: 3,990 mm, Year of construction: 2015, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking heater, traction control, = Additional Options and Accessories = - Digital tachograph - Electric mirrors - Tachograph (control device) - Fixed fifth wheel - Space Cab = Remarks = Number of axles: 2, Configuration: 4x2, Payload: 11,558 kg, Curb weight: 7,942 kg, Gross weight: 19,500 kg, Total fuel tank capacity: 845 liters, Fifth wheel height: 115 cm, Fifth wheel type: Fixed, Number of diff locks: 1, Suspension type: Air suspension, Cab type: Space Cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Color: Grey, Heated mirrors, Lighting type: Halogen lamp, Seat heating, Engine power: 301 kW (404 HP), Fuel: Diesel, Emission class: Euro 6, Transmission type: AS-Tronic, Gearbox make: ZF, Gears: 12, Power steering, ABS, ASR, Starter battery, Central locking, Number of seats: 2, Seat arrangement: 1+1, Upholstery: Fabric, Seat adjustment: Manual = Further Information = Gcsdsxqxcispfx Ad Asa Transmission Transmission: ZF, 12-speed automatic Axle configuration Tire size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steered; Left tire tread: 8 mm; Right tire tread: 5 mm; Suspension: leaf spring Axle 2: Twin tires; Left inside tire tread: 3 mm; Left outside: 6 mm; Right inside: 4 mm; Right outside: 4 mm; Suspension: air suspension Weights Unladen weight: 7,942 kg Payload: 11,558 kg Gross vehicle weight: 19,500 kg Interior Number of seats: 2 Maintenance APK (Dutch MOT): valid until 01.2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Identification Registration: 53-BFK-4 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, years of manufacture, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognizable quality • Good prices • Honest business practices • We speak many languages • We understand our customers • Support for import and transport • (Export) license plates arranged quickly • Expert technical services • The security of ‘recognizable quality’ • And more… Visit our website for special offers and a full inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: ready for operation (used), ASEM PB 410 H3 BOX PC SN:0AISZ1LH00049, the CMOS backup battery of the mainboard is empty!, used, normal signs of wear, 100% fully functional, delivery as shown in the photos. Gcsdex Equ Aspfx Ad Aea

Condition: new, The V-Turn 410 PRO, a cutting-edge Conventional Horizontal Lathe from KNUTH, represents the latest in the Engine Lathes product group, designed for both efficiency and precision. This machine boasts improved ergonomics alongside enhanced safety features, making it user-friendly while maintaining top-tier performance. Equipped with a powerful 5.5 kW spindle motor and an innovative inverter, it reaches speeds of up to 3,000 revolutions per minute, allowing efficient machining of workpieces with varying diameters. Its constant cutting speed function automatically adjusts the spindle speed during face turning, achieving results comparable to CNC lathes. With a robust and rigid construction, including a heavily ribbed machine bed and pre-loaded spindle bearings, this lathe ensures exceptional stability and precision. The standard equipment includes a 3-axis position indicator, coolant system, and various tool holders, enhancing its functionality for diverse machining tasks. You can buy now to elevate your machining capabilities with the V-Turn 410 PRO, a remarkable addition to the Conventional Horizontal Lathes and Engine Lathes by KNUTH. Gcjdpfx Adeww T S Io Aja

Condition: new, The V-Turn 410/1000, part of the Conventional Horizontal Lathes category and under the Engine Lathes group, is a precision lathe that excels in both precision and production applications. This bestselling machine features a robust inverter and a high-performance 5.5 kW motor that enables spindle speeds of up to 3,000 RPM, ensuring efficient processing of workpieces with small diameters. The constant cutting speed function automatically adapts to the turning diameter during face turning, delivering superior quality akin to that of CNC machines. Built on a heavy ribbed machine bed and a solid one-piece cast-iron frame, the V-Turn provides exceptional stability for heavier machining tasks. With its wide, hardened guideways and large spindle bearings, it guarantees excellent concentricity and longevity. The extensive standard equipment includes a 3-axis position indicator, coolant system, and a quick change tool holder, among others. Experience the precision of KNUTH's V-Turn 410/1000—request a quote today and enhance your machining capabilities in the Conventional Horizontal Lathe category and Engine Lathes group. Gcodpfx Adep Aua Ue Asa