Used Gesan Dp 75 for sale (7,132)

Condition: good (used), electric magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate, magnetic prism, magnetic prism -Magnetic prism: Magnetic measuring and clamping prism -Clamping surface: Length 120 mm -Prisms/Clamping surface: see photos Kdodpfx Ajx Sv Sajhwjh -Magnet: can be switched on and off -Dimensions: 120/75/H105 mm -Weight: 4.5 kg

Year of construction: 2012, condition: excellent (used), functionality: fully functional, 12 months warranty, demonstration unit, very good condition, only approx. 250 operating hours, immediately available - according to DIN EN 1539 for solvent-based substances - Maximum temperature: 300 °C - Oven chamber: 750 x 750 x 750 mm (W x D x H) - External dimensions: 1510 x 1150 x 2200 mm (W x D x H) - Temperature controller: JUMO dTRON 04 - Permissible solvent quantity max. 19.30 g - Heating capacity: max. 21.78 kW, connected load 22.5 kVA, nominal current 32.6 A - Connection: 400V 3-phase/PE 50Hz Kdjdpfx Ahjiq Uv Nswoh - Cable with 63A plug, also available as fixed connection (fuse protection 35 or 50 A required) - incl. 1 piece mesh shelf - Weight 550 kg - Documentation Inspection in our warehouse by appointment. Oven, ovens, industrial oven, circulating air oven, chamber circulating air oven, tempering oven, heat oven, drying oven, conditioning oven, paint dryer, solvent oven

Condition: excellent (used), mileage: 28,184 km, power: 75 kW (101.97 HP), first registration: 10/2022, fuel type: electric, axle configuration: 4x2, wheelbase: 3,280 mm, fuel: electricity, color: black, gearing type: automatic, number of seats: 3, total length: 5,310 mm, total width: 1,920 mm, total height: 1,940 mm, Year of construction: 2022, Equipment: air conditioning, electric window regulation, power assisted steering, = Additional options and equipment = Kodpoyfd Sysfx Ahwedh - Parking assistance - Heating - Air conditioning - Radio/CD player = Further information = General information Number of doors: 4 Registration number: VSH-25-G Axle configuration Maximum front axle load: 1,500 kg Maximum rear axle load: 1,800 kg Weights Unladen weight: 2,028 kg Payload: 1,027 kg Gross vehicle weight: 3,055 kg Maintenance, history, and condition APK (technical inspection): approved until 10.2026 Technical condition: very good Visual condition: very good = Company information = View our complete offering at:

Condition: good (used), Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape Kdjdpfx Ahox Sdu Aswoh -Manufacturer: Erge, heating tape, heating sleeve -Type: 80/82 Ø 75 -Item No.: 129 069 -Heating power: 1000 W -Voltage: 220 V -Quantity: 1x heating cable included -Transport dimensions: 250/160/H80 mm -Weight: 1.2 kg

Condition: refurbished (used), Tube Straightener VRM60/75, made by KIESERLING Tube diameter : 8 – 60 or 14 - 75 mm Tube length : Depending on accessories (loading table, channels). Minimum 0.5m The ratio diameter/thickness depends on the yield. Strength Kodovtpghopfx Ahwjdh Example: - 300 N/mm2 = Max. 6.5mm - 400 N/mm2 = Max. 5.7mm - 500 N/mm2 = Max. 5.1mm - 600 N/mm2 = Max. 4.7mm *The first 4 photos are examples of revamping of similar machines that we can offer in case of interest. The following are pictures of the machine in its current state. Tube diameter: 8 – 60 or 14 - 75 mm Tube length: Depending on accessories (loading table, channels). Minimum 0.5m

Condition: used, Year of construction: 2020, Manufacturer: Technilab Model: DP 400 Kjdpfex R D Iaex Ahwodh Year: 2020 Type: Planetary debridler Atex: Ex II 1/2 G Power: 1.1 kW / 1500 rpm Gear motor 1.1 kW 30 rpm Level sensor: high / low Flange diameter 400 mm Total machine weight: 100 kg

Condition: used, Year of construction: 1997, Manufacturer: Minipack Torre Model: FM 75 Type: Heat shrink wrapping machine Year: 1997 Machine power: 3100 kW Power supply: 220/230 V Useful dimensions of sealing bars: 420 x 280 mm MAX product dimensions: 400 x 250 x 160 mm Kodpfjx R D Akox Ahwjdh Machine dimensions: 130 x 170 x 70 cm

Condition: new, Year of construction: 2026, High-quality construction Drive roller is crowned (this ensures the grinding belt is automatically centered on the roller) and fully vulcanized for maximum service life and optimal smoothness Tool-free, and thus fast and uncomplicated, belt change Continuously adjustable height for optimal setup of the belt grinder for the user Freely adjustable metal work stop for optimal and safe guidance of workpieces when using the large flat grinding area Belt speed is optimally engineered to minimize risk of workpiece burning during processing Models with extraction are equipped with robust and flexible extraction hoses Motor protection switch with CEE plug connection including phase inverter 5-year warranty on the motor 1-year warranty on the belt grinder Belt length: 2000 mm Belt width: 75 mm Flat grinding area: 600 mm Belt speed: 15/30 m/s Kdedpfx Asbb R N Iohwjh Colour: RAL 9007 Three-phase motor 400 V: 3.0/3.75 kW Extraction capacity: approx. 630 m³/h Extraction motor: 0.37 kW Machine dimensions (W x D x H): 1100 x 550 x 1035 mm Machine dimensions (with extraction system) (W x D x H): 800 x 600 x 1450 mm Weight: 105 kg DELIVERY: FREE SHIPPING (within Germany) CAN’T FIND THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT SERVICE PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK US FOR A QUOTE!

Condition: new, Year of construction: 2026, - belt length: 2000 mm - belt width: 75 mm - surface grinding area: 600 mm - belt speed: 15/30 m/s - colour: RAL 9007 - belt motor: 400 V 3,0/3,75 kW - suction capacity: ca. 630 m³/h - suction motor: 0,37 kW - dimensions LxWxH: 1100 x 550 x 1035 mm - weight: 105 kg Kdodpfx Ahep R N N Iswoh

Condition: good (used), Year of construction: 2022, operating hours: 9,800 h, RENNER RS 75 - 10 bar oil-injected screw compressor The compressor is in good condition with 9800 operating hours. Pressure: 10 bar Rated power: 75 kW Delivery rate: 10.35 m³/min Sound level: 76 dB(A) Air outlet: 2" Kjdjygmhmjpfx Ahwjdh Dimensions (L x W x H): 1754 x 1104 x 1697 mm Weight: 1367 kg Visit our store. We always have a large selection of new and used compressors in stock.

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN HAV 3162 variable three-rolls bending machine Electronically controlled, hydraulic three-rolls bending machine Technical specifications: Number of Rolls: Three Geometry of the side rolls: variable Working length: 3050 mm Top roll diameter: 620 mm Side rolls diameter: 550 mm Pressure force against the top roll: 630 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 55 kW (75 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 45,000 kg Length: 7,600mm Width: 3,700mm Height: 3,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 75 mm Bending performance (full working width) 48 mm from a pipe diameter of 3,100 mm Rolling capacity (full working width) 55 mm Ksdpjiivgyefx Ahwodh Bending performance (full working width) 40 mm from pipe diameter 805 mm Standard equipment: variable geometry with linear guides for rolls movement Extra long release arm for increased frame stability Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7-HMI PLC control PGS-CLASSIC control with Siemens touch panel Hitech hydraulic and electric package Simultaneous rotation and rolls movement Safety trip wire with emergency stop and CE certification central lubrication Water cooling for the hydraulics cone bending device Prepared for retrofitting supports and roller conveyors FACCIN Advantage Package AP

Condition: good (used), Reamer, twist drill, drill bit Ksdpox R Sz Isfx Ahwjdh -Twist drill: Ø 75 mm -Recording: MK5 -on request: different sizes/quantities available from further stock -Dimensions: Ø 75 x 600 mm -Weight: 8.6 kg

Condition: used, total length: 3,000 mm, total width: 600 mm, total height: 2,130 mm, Weight: 2.500 kg - Documentation available: No - CE certificate present: No - Serial number: 2439 - Drive system: Conventional - Press force [ton]: 83 - Max. working width [mm]: 2500 - Column gap [mm]: 2700 - Crowning system: None - Punch holder: Standard - Transport dimensions: 3000mm x 600mm x 2130mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 3 Kedpsxr Dnmefx Ahwodh Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, - Fast cutting saw for solid material / profile up to 75mm - autom. loading magazine for bars up to 6300mm length and 3t weight - feed via ball screw - single stroke with 600mm Kjdpfxjggytqe Ahwedh - SIEMENS - electronics / drive / control - good parts / first cuts are sorted - on request with conveyor unit for sawn parts - robot connection possible - incl. suction

Condition: new, width of the strips 75 mm Kjdsk Uqg Sopfx Ahwsdh band length 2000 mm band speed 30 m/s total power requirement 3,0 kW weight of the machine ca. 70 kg dimensions of the machine ca. 610 x 944 x 1419 mm Mobile belt sander PASOVEC 75 RUNNER Pasovec 75 RUNNER - the special belt grinder developed for Surface grinding applications, especially for grinding weld seams in the material surface. Pasovec 75 Runner removes unwanted layers that occur when Sheet metal rolling or after sheet metal cutting with plasma or oxygen arise. Innovative, multifunctional machine Stepless adjustment of the grinding depth Equipped with a dead man's switch Station for flat grinding small workpieces Low running costs

Condition: new, bore capacity in steel (diameter) 30 mm throat 270 mm bore stroke 125 mm 4 Motor output 9 speeds 70 - 2800 U/min Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design * Industrial engine * Quiet running spindle thanks to new spindle design * Machine operation with safety electronics in 24 V direct current * Guaranteed concentricity = 0.02 mm in the measured drilling spindle * Clockwise/counterclockwise rotation * Precision spindle bore * Control panel with user-friendly, dirt and water resistant * Membrane keyboard * RPM display * Separate emergency stop button * Tapping function * Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° * Drilling depth stop * LED machine light integrated in the drill head * V-belt cover with safety switch * Thick-walled steel column for high power absorption and stability * Solid, large base plate with T-slots * Execution of the entire machine Scope of delivery: - Keyless drill chuck 0 - 16 mm - T-Nuts -expectors - Operating tool Kedpfx Ahoun Um Eowedh - BMP 160 machine vice

Condition: good (used), Gear motor, electric motor, electric gear motor, spur gear motor -Manufacturer: Swedrive Siemens, geared motor with brake -Gearbox: Swedrive 9103984 1 i= 19 -Speed speed: approx. 75 rpm -Motor: Siemens 1PP7096-4AA12-Z with fan -Power: 1.5 kW / 1420 rpm -Shaft: Ø 32 x 55 mm Kdsdpfx Ajq Syubjhwsh -Dimensions: 550/220/H235 mm -Weight: 37 kg

Condition: used, Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Vorwerk Rota, solid rubber tires 2 pieces -Tire size: 23x9-10 (225/75-10) RIM 6.50 F-10 -Bolt circle: Ø 162 x 20 mm -Recess: Ø 110 mm -Price/Delivery: complete Kdedpfxjutut Ao Ahweh -Dimensions each: Ø 525 x 220 mm -Weight: 49 kg/piece

Condition: good (used), Centrifugal pump, acid pump, caustic pump, water pump for groundwater lowering pump Kodpfx Asv Ai Epohwsdh -Manufacturer: DIGEP Diósgyor Maschinenfabrik, centrifugal pump type DP-AMIIV -Engine: Evig 2.2 kW -Performance: 14 l/s / 840 l/min / 50.4 m³/h -Delivery height: 8 m -Pipe connection input: Ø 100 mm -Pipe connection output: Ø 75 mm -Dimensions: 580/290/H380 mm -Weight: 83 kg

Condition: used, PLC control Kdedpfx Aeb Nfdfjhwoh -Type: Simatic S5 6ES5430-4UA14 -Simatic DP, decentralized peripheral DP/DP-coupler Coupling module for connecting two PROFIBUS-DP networks, redundant power pricing -Number: 21x available -Price: per package -Weight: 0.3 kg

Condition: excellent (used), three-phase motor, electric motor -Engine: unused -Power: 75 kW -Speed: 2955 rpm -Protection class: IP 23 -Type: B3-B5 -Shaft: Ø 60 mm -Number: 3x engines available Kdjdpfx Asb A Hzfehwsh -Price: per piece -Dimensions 900/560/H500 mm -Weight: 396 kg

Condition: good (used), Diaphragm pump, centrifugal pump, water pump, chemical pump Kdedpfxjb A Rkio Ahwoh -Flow rate: approx. 40 l/min -pneumatically driven -Connection: 8 bar max. -Dimensions: 270/200/H140 mm -Weight: 6 kg

Condition: good (used), Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tie rod cylinder -Hydraulic cylinder: tie rod cylinder stroke 75 mm -Piston rod: Ø 12 mm -Number: 2x cylinders available -Price: per piece -Dimensions: Ø 50 x 170 mm Kdsdpsv Ni Azsfx Ahwsh -Weight: 1.5 kg/piece

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders, lifting power jacks -Manufacturer: Bosch, double-acting hydraulic cylinder, stroke 75 mm -Type: Piston rod: Ø 20 mm / M14 -Holes: Ø 20 mm Kdsdjv Ta Dkspfx Ahwsh -Dimensions: Ø 65 x 300 mm -Weight: 3.0 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams Kedpfxev I R S Io Ahwedh -Hydraulic cylinder: double-acting, stroke 75 mm -Piston rod: Ø 40 mm / thread M35 -Mounting: Ø 35 mm -Dimensions: Ø 108 x 405 mm -Weight: 12.5 kg