Used Gesan Dp 65 for sale (8,802)

Condition: used, power: 37 kW (50.31 HP), gearing type: other, fuel type: diesel, color: yellow, overall weight: 4,700 kg, empty load weight: 4,260 kg, maximum load weight: 440 kg, axle configuration: 4x4, number of seats: 1, first registration: 01/2000, brakes: other, Year of construction: 2000, operating hours: 6,320 h, driver cabin: day cab, wheelbase: 1,950 mm, Equipment: additional headlights, all wheel drive, cabin, pallet forks, * German machine * 6,320 operating hours * All-wheel drive * Condition: see photos * Articulated Komatsu WA 63 - 3 Lhjdpfszcbumex Am Toh * Turning radius 3,640 mm * Articulation angle 40° * Hydraulic 4-point quick coupler * Loading bucket 0.7 m³ - bucket width 1,850 mm * Bucket pivot height 3,115 mm * Planetary axles with automatic differential locks on both axles * EasyDrive (Hydrostatic drive) (SN) * 1st speed range 0 - 5.6 km/h - 2nd speed range 0 - 20 km/h * Hydrostatic steering * Working pressure 200 bar hydraulic * Power-assisted hydraulic controls * Towing hitch * ROPS and FOPS comfort cab * Double-door safety cab according to DIN/ISO * Easy operation via multi-function lever * Comfort driver's seat * Delta lift arm * Sliding window on the right * Heater * Heated rear window * All-around glazing * Optimal noise insulation * Engine: Komatsu Type Komatsu 4D 94E - 37 kW - 2,775 cm³ * Easy maintenance * Wide-opening engine hood * Side maintenance flap * Wheelbase 1,950 mm * Track width 1,450 mm * Weight 4,700 kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish. Note: We offer and strongly recommend an inspection and examination of the goods so that the buyer does not have any false impressions about the condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is assumed for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.

Condition: used, Year of construction: 2008, turning diameter 310 mm turning length 600 mm control Sinumerik 810 D PL Siemens turning diameter over bed 425 mm turning speed range - main spindle 500 - 4.500 min/-1 Lhsdpfx Amstqmqhs Tsh max. Torque 280 Nm power capacity - main spindel 16,5 kW Spindle diameter 100 mm C-Axis 360 ° chucking diameter 210-52 mm spindle bearing diameter 120 mm clamping cylinder 65 mm Bar feed max. 65 / (52) mm spindle nose A8 DIN 55026 x-axis 230 mm z-axis 740 mm rapid traverse X-axis 15 m/min rapid traverse Z-axis 24 m/min tool positions turret 12 pos. driven statition 12 pos. tool taper VDI 30 DIN 69880 Spindle speed driven tools 6.000 min -1 power capacity - driven tools 3,7 kW max. Torque 9,5 Nm dia. of quill MK 4 80 mm quill stroke 120 mm tailstock adjustment 475 mm tension force 500 daN weight of the machine ca. 4,2 t dimensions of the machine ca. 3,7 x 2,2 x 1,8 m CNC - Turning- and Milling Center SPINNER - TC 65 MC - Turret completely overhauld

Condition: used, Max. Stanzkraft: 650 kN Hole e.g. a 20 mm hole in 20 mm steel For other performance data see nameplate or on request Includes assortment of punches and dies Lhjdef Nwqlopfx Am Toh Very good condition

Condition: used, mileage: 44,185 km, power: 87 kW (118.29 HP), first registration: 05/1993, fuel type: diesel, empty load weight: 4,650 kg, maximum load weight: 2,250 kg, overall weight: 6,900 kg, tire size: 8R17,5, axle configuration: 4x2, wheelbase: 3,000 mm, color: red, driver cabin: other, gearing type: mechanical, emission class: none, suspension: steel, Equipment: additional headlights, cabin, differential lock, fog lights, Vehicle location: Bovenden, Doka, switch 5, differential lock, fog lights, rotating beacon, storage box, leaf suspension Wheelbase: 3000 mm Body: LF 8 fire engine with FP 8/8 front-mounted pump Sale to tradesmen or export is subject to 19% VAT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Lsdpfx Asvhku Aom Tjhh - .

Condition: used, empty load weight: 3,710 kg, maximum load weight: 14,290 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2016, next inspection (TÜV): 02/2025, loading space length: 6,500 mm, loading space width: 2,300 mm, loading space height: 1 mm, suspension: air, tire size: 315/80R22.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, turntable, air suspension, ABS (anti-lock braking system), U-protection, twin tires, stanchions Construction: 2-axle timber transport trailer with 4x Exte bolsters, 2x 10t BPW axles, drum brakes! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Lhedpjvaicvjfx Am Tjh - .

Condition: like new (used), Year of construction: 2022, operating hours: 850 h, functionality: fully functional, turning length: 610 mm, turning diameter over cross slide: 500 mm, turning diameter: 725 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 260 mm, feed length Y-axis: 80 mm, feed length Z-axis: 610 mm, torque: 250 Nm, bar passage: 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE with ShopTurn control! CNC turning center for complete machining of turned and milled parts. Features integrated spindle motors and a water-cooled sub-spindle (preloaded roller guides) with Y-axis on both main and counter spindle. State-of-the-art SINUMERIK ONE control with ShopTurn dialogue programming. Main spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Sub-spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Turret: - 12-station VDI 30 radial tool turret with directional logic for up to 12 driven tool holders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis travel: +/- 40 mm Includes hollow clamping cylinder with draw tube, C-axis on main and sub-spindle, Sinumerik ONE/OPERATE control, 22" multi-touch display, ShopTurn, 3D simulation, residual material detection, USB interface, electrical cabinet climate unit, reinforced coolant unit (24 bar), chuck flushing (additional pump 3.5 bar), part ejector and flushing through sub-spindle. Hydraulic unit, interface for chip conveyor, documentation and CE certificate. Control language: German/English Electronic handwheel EMCO tool breakage and wear monitoring/SINUMERIK ONE Alternating spindle speed Sub-spindle as tailstock: This cycle allows using the sub-spindle with mounted live center for workpiece support, enabling shaft part machining on machines without a tailstock by using the sub-spindle. Max. thrust force limited to 50% of max. axis force. EMCO PROFI-NET ROBOT INTERFACE: Interface for robot integration using HARTING connector, signal exchange via Profinet, safety signals two-channel/potential-free. Digitalization package for Sinumerik: Condition monitoring SIEMENS ONE INTERFACE for integration with MDE/BDE systems, standard with the following information: - Machine ON - AUX ON - Automatic operation - Production mode - active program - Program running and override between 95 and 105% - Part count impulse (M30) - Programmable impulse (M300) 3D machine data/MT65-G2: 3D data model of the machine included. Pneumatically operated finished part catcher for gentle unloading – parts are transferred into a catch box (standard) or onto a conveyor belt (optional). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000 for connection of EMCO's SL1200 short bar loader. Further options available… Lhedpfx Asx E Dncsm Tsh Machine is available immediately!

Condition: used, diameter 250 mm boring diameter / mm Lhsdpfx Aoy S D Euem Tjh - / hollow 65 mm Forkardt power chuck including flange Type: 3NHF250-65-Z8-S12 nmax: 4500/min Diameter: 250mm Passage: 65mm Factory no.: Y615126

Condition: used, mileage: 260,356 km, power: 368 kW (500.34 HP), first registration: 04/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: blue, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,900 mm, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGA 28.500 6x2BL Gergen Roll-off Tipper VIN: M812898 Max. container length: 6.50m Chassis / Attachments: * Leaf/air suspension * 3rd axle lift axle, twin tyres (10t) * Wheelbase: 1-2 = 4,500 mm / 2-3 = 1,350 mm * Tyres: 385/65 R22.5 * Tyre tread depth remaining: axle 1: 70% / axle 2: 10/20% / axle 3: 20% * 1 x diesel tank * 1 x hydraulic tank * 1 x AdBlue tank * Alcoa aluminium rims Body: Ledownk Dvepfx Am Tohh * Gergen hooklift GRK 21/65 Ion * Roll-off tipper prepped for retractable crane * 2-way hydraulics with quick-release coupling at rear, incl. side oil cooler * 4 mechanical container locks Cab / Driver’s compartment * Flat, long cabin * Roof hatch * Refrigerator * Climate control system * Stationary air conditioning * Auxiliary heater * Hands-free kit * BT, AUX, USB * Distance control * Lane assist * Cruise control * Partial leather seats * Lightfix lamp bar with 4 spotlights * 2 x air horns Engine / Transmission * 368 kW // 12,419 cm³ // Euro 6c * ZF-AS Tronic / automatic * Engine brake * Differential lock Weights * Gross weight: 26,000 kg * Payload: 13,990 kg * Unladen weight: 12,010 kg Other * German vehicle * 1 previous owner * New roadworthiness certificate (TÜV) available upon request New main inspections / safety inspections or changes to gross vehicle weight (downgrade/upgrade) are available on request. We are pleased to assist you with export/transfer number plates, and vehicle delivery within Germany is also possible. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing or typographical errors. Subject to change, prior sale, and errors! ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge is the sale of new and used commercial vehicles. On our 11,000 m² premises, you’ll find a large selection of vehicles. Our company philosophy is characterised by fairness and integrity. Since customer satisfaction is very important to us, we provide our customers with an excellent all-round service package and assign a competent contact person to guide them through the purchase or sale process. See for yourself! Our services for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Organising special transports We are happy to assist you with the organisation of special transports. Temporary / Export number plates We are happy to assist you with obtaining export or temporary number plates. Customs clearance We are happy to assist you with customs formalities.

Condition: used, mileage: 323,500 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 01/2014, emission class: euro5, color: red, brakes: retarder, number of seats: 15, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Our internal no.: 1106 * MB 516 Sprinter Lhedpfx Amenp Dhus Tsh * VDL body * Mid-City * Lettering - V I N Y L - the vehicle is fully wrapped * Class M3 * Water pump and V-belt / idler pulley replaced new in 02/2024 * Automatic transmission * TELMA RETARDER * Driver's air conditioning * Passenger compartment – A/C * Auxiliary heater / stationary heating * Convector heating * Seats: 15 * Standing places: 12 * Vehicle speed approx. 99 km/h * Standing places * Manual folding ramp * Inspection book available * Length: 7.361 m * The vehicle has minor body damages – see pictures * More photos available on request * Front axle tires in good condition. * etc. * All information without guarantee * Subject to prior sale * Please refer to our general terms and conditions

Condition: used, mileage: 433,626 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 02/2013, next inspection (TÜV): 12/2025, emission class: euro5, color: white, number of seats: 14, Equipment: ABS, air conditioning, parking heater, * Our internal no.: 1089 * MB Sprinter 516 * Type: City 35 * EVOBUS - ORIGINAL * 2 x AIR CONDITIONING * First registration EURO 5 * New engine in 06/2021 at 341,638 km (current engine: 91,988 km), repair invoice amounting to 12,457.63 € is available * Auxiliary heater / stationary heating * Driver's seat heating * Gorba destination display with control unit CU5 Lhodjwnlhpjpfx Am Toh * TFT monitor preparation * Convector heating * Seats with 3-point seat belts * 13 seats + 1 wheelchair space * 9 standing places * Mechanical fold-out ramp, ... * The customer is obliged to independently verify the condition and equipment of the goods/vehicle! * etc. * The vehicle may be in use / mileage and condition may vary * All information without guarantee * We reserve the right of prior sale * We refer to our terms and conditions

Condition: used, mileage: 579,278 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 11/2017, emission class: euro6, color: white, number of seats: 15, Equipment: ABS, air conditioning, * Our internal no.: 1090 * MB Sprinter 516 * Type: City 35 * EVOBUS - ORIGINAL * 2 x AIR CONDITIONING * First registration 11/2017 - EURO 6 * New engine in 05/2024 at 534,162 km (current engine: 45,116 km), repair invoice amounting to approx. 15,000.00 € is available * Complete overhaul of automatic transmission including new torque converter in 07/2024 * Vehicle has dent/damage * Auxiliary heater / stationary heating * Driver's seat heating * LAWO destination display with SicmaControl unit * TFT monitor preparation * Convector heating * Seats with 3-point seat belts * 11 seats * 12 standing places including 4 emergency folding seats or 1 wheelchair space & 2 emergency folding seats * Mechanical fold-out ramp, ... Lsdownlhvopfx Am Tshh * The customer is obliged to independently verify the condition and equipment of the goods/vehicle! * etc. * All information without guarantee * We reserve the right of prior sale * We refer to our terms and conditions

Condition: used, mileage: 634,200 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 10/2013, emission class: euro5, brakes: retarder, number of seats: 11, Equipment: ABS, air conditioning, parking heater, * Our internal number: 1042 * Sprinter 516 * Original EVOBUS City 65 * Automatic transmission * Large passenger compartment - air conditioning * Driver's seat - air conditioning * Auxiliary heater / parking heater * Technical repair history includes: * Torque converter €1,114.78 * Reversing gear €3,900 * Automatic transmission €4,796.33 * Door drive with motor €2,025 * New rear axle air bellows 11/2022 * Headlights * TELMA €5,933.40 * Differential 1,159.52 * DIESEL ENGINE - Exchange €9,114.33 / February 10, 2022 * New front brakes 03/2023 * New front brake discs 05/2022 * New starter 02/2022 * Diesel particulate filter exhaust system 02/2022 * New front and rear engine mounts 02/2022 * New intercooler 02/2022 * New viscous fan 02/2022 Ledpfxstqk Hfs Am Tehh * New air conditioning compressor 06/2022 * Intercooler / charge air hose / 10/2022 * etc., ... List of €41,355.17 is available! - * Matrix * Cruise control * Convector heater * Mechanical folding ramp * Driver's compartment protective screen * etc. * All information without guarantee * We reserve the right to sell prior to sale * Please refer to our terms and conditions

Condition: used, mileage: 142,000 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 06/2018, emission class: euro6, color: white, brakes: retarder, number of seats: 15, Equipment: ABS, air conditioning, parking heater, * Our internal ref.: 1093 * Well-maintained vehicle * (Two identical vehicles available) * Sprinter 516 * Original EVOBUS bodywork * City 65 * RETARDER. TELMA * LOW GENUINE MILEAGE – VEHICLE ONE OWNER * LED matrix display: front / side / side / rear with control unit * Bus lifting system * Auxiliary heater * Stationary heating * Driver's cab air conditioning * Passenger compartment air conditioning * 2 fold-down seats * Double glazing * Convector heater * Manual folding ramp * Pre-installation for interior monitor (the monitor and cash register/printer shown will be removed prior to sale) * Clean vehicle * Vehicle in operation – mileage and condition may vary. * ALL INFORMATION WITHOUT GUARANTEE * INTERIM SALE RESERVED * PLEASE REFER TO OUR TERMS AND CONDITIONS. These are part of the sale! Lsdpfeyxi Riox Am Tjhh

Condition: good (used), overall weight: 41,000 kg, Year of construction: 2004, operating hours: 5,500 h, Single-toggle jaw crusher Lhsdpfxjtpakte Am Toh Inlet: 1,000 x 650 mm Finished product: approx. 0/70-0/200 mm Feed hopper, vibrating feeder Electric drive with 220 kVA generator Side and main discharge conveyor Overhead magnet

Condition: excellent (used), Dissolver IKA Ultra Turrax T 65 S 5 Power 1.6 kW Speed 3600 1/min, 7200 1/min Ledpfxjvkdlme Am Tohh IKA dispersing tool S 65 with trough and container lid mobile, movable on castors Very good working condition, directly from production!!!

Condition: used, power capacity / kW volt / V ampere / A PERMAMENTER MAGNETFELD-SERVOMOTOR Typ: 16.0071-65 FUNKTIONELL ! Ljdpjy Suugefx Am Tjhh Gewicht: ca. 30kg

Condition: used, LinMot Servo Drive servo controller Type:E2030-DP Ljdpfoy Sulxjx Am Tshh Condition: used (functional)

Condition: used, Year of construction: 1985, functionality: fully functional, overall weight: 6,200 kg, power: 30 kW (40.79 HP), The machine has seen little use and is still in very good condition! Lhodpfjzc Htbsx Am Teh

Condition: excellent (used), 113 sets, pallet collars type 65, Cordes, ideal for stacking goods on Euro pallets - second-hand : Lhodpor Imatjfx Am Tsh Price per piece blue pallet collars (net): only 45.-€ Price per piece in galvanized quality (net): only 55.-€ Manufacturer: Cordes Type: Pallet extension type 65 Year of manufacture: unknown With hook connection for pallet dimensions 1200 x 800mm Usable height; 800mm 800mm high 800mm wide Load capacity: 1.500kg Dead weight per set approx. 22kg 4 stacking plates for safe stacking collapsible New price: approx. 150.-€ Quantities available: 29 sets in galvanized and 84 sets in blue Condition: very good Available: immediately Location: 74080 Heilbronn

Condition: used, Year of construction: 1980, x-travel:500 mm y-travel:500 mm z-travel:400 mm turning speed range:30 - 2240 U/min feeds -stepless-:1 - 750 mm/min rapid traverse:1500 mm/min table surface area:400 x 800 mm tool taper:SK 40 total power requirement:7,8 kW weight of the machine ca.:1.8 t dimensions of the machine ca.:2,1 x 1,6 x 2,2 m Ljdecxxq Depfx Am Tshh

Condition: used, mileage: 549,347 km, power: 350 kW (475.87 HP), first registration: 05/2015, fuel type: diesel, number of seats: 66, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, Year of construction: 2015, Equipment: ABS, air conditioning, cruise control, navigation system, = Further Options and Accessories = - DVD - Air conditioning - Front refrigerator - Toilet - Webasto heater = Further Information = Lsdpfx Amex S Iy Ae Tehh Height: 380 cm Damages: none = Company Information = We are an international company based in Belgium, located in the Brussels area (approx. 20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses and features a large parking area serving as a display site. We always have numerous buses from all brands, capacities, models, and in every price range in stock. We can find the right touring, school, or city bus for your needs and budget. All information provided without guarantee. Subject to errors, interim sale, and typographical mistakes. Visiting hours for used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mówimy po polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: excellent (used), INDEX ABC 65 is an INDEX CNC Turning‑Milling‑Drilling Center designed for high precision, accuracy and reliability. Capacity: 2 turning spindles, 2 turrets; spindle bore 65 mm; spindle diameters 140/110 mm; travels Z300 X140 Y100 mm; turret positions 10/9 (back 8). Specs: main spindle stepless 0–6000 rpm, 25/35 kW, torque 80/120 Nm; back spindle 6000 rpm, 5/9 kW; driven tools 7.5/9 kW; tool shank 45 mm; indexing 0.4 s; rapids X30/Z50 m/min; power supply 3x400 V 50 Hz; installed power 41 kW; weight ~6500 kg; dims 3600×1280×1950 mm. Accessories: 300 l coolant, 80 bar high‑pressure, paper filter, lamp, collet device, USB, parts conveyor, chip conveyor, toolholder set. Achieves tight tolerances; ideal for automotive, watchmaking, aerospace, medical and toolmaking. Ledjy S Dfuopfx Am Tjhh

Condition: good (used), Year of construction: 2014, total width: 600 mm, total length: 1,000 mm, total height: 600 mm, Manufacturer: MIBA Type: RNF-65 Year: 2014 Milling cutter laser guided Working range 2000 - 8000 mm Designed for mobile use on a 3000 mm gauge Specifications Metric US Standard There are (currently) no specifications for this machine. Dimensions (estimated) There are (currently) no dimensions for this machine. Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details. Lodpfxowq Hp Tj Am Tehh

Condition: good (used), Year of construction: 2014, Manufacturer: MIBA Type: LNF65 Control: SIEMENS 840D Year: 2014 Lodewq Hqkspfx Am Tohh Specifications Metric US Standard There are (currently) no specifications for this machine. Dimensions (estimated) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Condition: used, Year of construction: 1994, operating hours: 6,852 h, Type of fuel: Diesel Colour: Grey Empty weight: 3.920 kg Dimensions (LxBxH): 263 x 115 x 254 cm Lifting capacity: 2.500 kg Lift height: 400 cm Fork dimensions: 90 x 1.000 mm - Year: 1994 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 6BN10101 - Operating hours: 6852 - Lifting capacity: 2500kg - Lifting height: 4000mm - Overhead clearance: 2540mm - Free lift: 0mm - Fork length: 90mm - Maximum fork width: 1000mm - Minimum fork width: 210mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Half cabin, Work lights - Mast: Duplex - Drive: Diesel Lodpsyr D Easfx Am Tehh - Motor brand: Mitsubishi - Transport dimensions: 2630mm x 1150mm x 2540mm (l x w x h) - Transport weight [kg]: 3920kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom