Used Gesan Dp 65 for sale (21,773)

Year of construction: 2012, condition: excellent (used), machine/vehicle number: B2.01127.1899, Stationary high pressure pump unit Hammelmann HDP 127 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 127 Working pressure: 650 bar Delivery rate: 72 l/min. Drive speed: 1500 rpm. Driving power: 87 kW with EMK KAE2G280M-4B3E3K electric motor 90 kW, IP55, IE3 Kjdpfsix I H Uex Af Sjfa with pressure control valve, with safety valve, with oil cooling system. dimensions LxWxH: approx. 1.700x850x1.350 mm weight: approx. 1.200 kg Year of manufacture: 2012 Condition: In very good used condition.

Condition: ready for operation (used), Mettler Toledo ICS425 K-3XS/ DR/F/m/65 Precision industrial scale There are 3 pieces available. Description see picture 2 Description was taken over. You are welcome to come by for a viewing You will receive a proper invoice. For foreign customers can also be a net invoice. Prerequisite is a valid Ust.Indent.Nr. Kedpsp E Dk Hefx Af Sofa Subject to prior sale. Visit our store and see our other offers. Indicated company names and trademarks are the property of their owners and serve only for identification and description of the products. Deviations from technical data and errors in the description of the article can happen and remain reserved.

Condition: good (used), Year of construction: 2007, Traub TNX 65/42 Milling and Turning Center Mfd. 2007 Serial #7060107 Commissioned in 2010 TX 8i-S control (Mitsubishi/Traub based control with Mitsubishi drives and motors) 15 CNC axis’s (4) X-Y-Z turrets with 10 positions each. Up to 20 tools per turret 65 mm thru hole main and sub spindle (sub spindle has coolant flush) Foot pedal control for clamp/unclamp of spindle chucks Servo driven gantry receiver Hydraulic swivel w/ pneumatic finished part and bar remnant gripper Finished part conveyor belt RESY paper band coolant filter Knoll Coolant tank with BKW refrigerated coolant temperature control 20 Bar High pressure and 8 Bar Low pressure coolant pumps Knoll chip conveyor FMB Turbo 5-55 magazine bar feeder (new in 2010) 2) Single stick turning tool holders 2) Double stick turning tool holders 1) Cut-off tool holder 1) Overdriven double radial live ER Collet tool holder 1) Overdriven radial live ER Collet tool holder 4) Radial live ER Collet tool holders 1) Radial live End Mill tool holder Ksdpfjq Npqmjx Af Sefa 1) Angle adjustable live ER Collet tool holder 2) Radial live Shell Mill tool holders 2) Axial live End Mill tool holders 6) Axial live ER Collet tool holders 43) Additional tool holders on separate list (see supplemental attachment) Hainbuch main spindle collet chuck Rohm sub spindle 2 jaw chuck 2 Spare sets of spare Z-axis ball screws and bearing packs.

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Kfedpfjhvz D Hox Af Sja Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery: 01x CS Sigma profile, used Material color: sendzimir galvanized profile length: approx. 1.750 mm CS Sigma: approx. 200 x 65 x 18 mm material thickness: approx. 1,50 mm weight / pcs.: approx. 7,950 Kg Remark: The pictured angles are not part of the offer. General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: used, Production line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 65 mm, weight 2.8 t /// Drive: Thyssen Henschel TPM 3-65-DOS-25, serial number 6333547/13, weight 710 kg (1) Calibration table Technical details: Table length approx. 6 m (1) Haul-off unit Technical details: Contact length approx. 1,500 mm (1) Film application unit Kedox I Itbopfx Af Sofa (1) Saw unit Technical details: Upward stroke, saw blade diameter 250–400 mm, profile gap WxH 340 x 20 mm / diameter 115 mm, sequence max. 40 cuts/min (1) Tilting table Technical details: Length approx. 6,000 mm

Condition: used, Year of construction: 2015, turning diameter 250 mm turning length 600 mm control FANUC Series 31i-Model A travel -x axis 180 mm travel -y axis +/-45 mm - - - - - Main spindle - - - - - - - - - - - turning speeds 0 - 5.000 U/min bar capacity 65 mm --- Subspindle --- - - - - - - turning speeds 0 - 7.000 U/min bar capacity 42 mm --- upper turret 1 --- - - - - - - numbers of positions in the tool changer 12 tool taper BMT 45 Number of axles X1 / Y1 / Z1 St. Tools speed 8.000 U/min --- upper turret 2 --- - - - numbers of positions in the tool changer 12 tool taper BMT 45 Tools speed 8.000 U/min Number of axles X3 /Y3 / Z3 St. --- lower turret 3 --- - - - numbers of positions in the tool changer 12 Kfjdox I Shpspfx Af Sea tool taper BMT 45 Number of axles X2 / Z2 St. Tools speed 8.000 U/min CNC Turning- and Milling Center | SPINNER - TTS 65 Triplex equipped with a main spindle and a sub-spindle, each including a C-axis, three triplex turrets designed for driven tools, as well as a bar feeder (Top Automazioni X-Files-S Series 3000, SX version). The machine has only 3.500h processing time hours. The machine is in good condition and can be inspected under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TTS65Triplex | TTS 65Triplex | TTS-65-Triplex | TTS-65 Triplex

Condition: excellent (used), Year of construction: 2006, Dimensin: 2650 x 2100 x 2100 mm Clamping Force: 635 KN Working pressure: 206 bar Piston diameter: Ø200 mm Stroke: 140 mm Daylight: 150/180 mm Kedpfex I N Hiox Af Sofa Heating plant dimension: 250 x 300 mm Max. mass of heating plant: 70 kg Oil reservoir: 100 l Rated power: 19.66 kW Heater capacity: 9.6 kW Vacuum motor power: 2,6 kW Between light curtain and mould area: 270 mm Stroke of vacuum cover: 140 mm The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, spindle speed (max.): 4,000 rpm, travel distance Y-axis: 50 mm, bar passage: 77 mm, counter spindle speed (max.): 4,000 rpm, distance between spindles: 1,300 mm, Original purchase price of the machine was over €500,000! Turning-milling center equipped with 2 turrets including milling drive and 2 Y-axes! TECHNICAL DETAILS Spindle distance: 1,300 mm Y-axis travel range: ± 50 mm Main spindle (BigBore 77) Main spindle speed range: 0 - 4,000 rpm Main spindle drive power: 29 kW Main spindle nose (DIN 55026): A2-8 Main spindle bar capacity max.: 77 mm Max. torque: 250 Nm Main spindle draw tube connection: M85 x 2 Counter spindle (BigBore 77) Counter spindle speed range: 0 - 4,000 rpm Counter spindle drive power: 29 kW Counter spindle nose (DIN 55026): KK 8 Max. torque: 250 Nm Max. chuck diameter: 250 mm Counter spindle draw tube connection: M85 x 2 BMT turret (upper right) Max. speed BMT turret (upper): 12,000 rpm Max. drive power BMT turret (upper): 10 kW BMT turret (lower) Max. speed BMT turret (lower): 12,000 rpm Max. drive power BMT turret (lower): 10 kW Ksdpfxox Iz U So Af Ssfa EQUIPMENT Hollow clamping cylinder including draw tube Part ejector Through-spindle coolant for sub spindle Sinumerik 840D-sl/OPERATE CNC control 22" multi-touch display IPC with 240 GB SHOPTURN conversational programming USB interface Network drive / Ethernet 3D simulation 2x 12-position BMT tool turrets C-axis for main and counter spindle TRANSMIT Software Chip conveyor Minimum quantity lubrication Control cabinet air conditioning unit Hydraulic unit Machine lamp 230 V power socket at the operator panel 5 leveling elements Documentation

Condition: good (used), grinding stone, grinding pin -Recording: M12 -Outer diameter: 65 mm -Length: 67 mm Ksdpsb A Hiuofx Af Sofa -Radius: 30 mm -Sale: only complete set -Weight: 38 kg

Condition: good (used), Technical data for the pallet rack upright: Racking system: Bito Type: PL 38 Included in delivery are: 01x pallet rack upright, used material color: sendz. galvanized type of upright: P 20 upright profile dim.: 90 x 65 x 2.0 mm Incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) Kfedsnfvlyjpfx Af Sja 4.800 mm high 900 mm deep Note: The yellow upright protectors are not part of the delivery delivery scope, but can be purchased as an option.

Condition: ready for operation (used), Siemens 1FT5046-1AF71-3EA0 permanent magnet motor SN EF186446105001 + HE-65-M rotary encoder, used, minor signs of wear, 100% functional, scope of delivery as per photos Kfedol Syhgspfx Af Ssa

Condition: excellent (used), Year of construction: 2015, operating hours: 7,110 h, functionality: fully functional, DMG DMU 65 Monoblock 5-Axis Machining Centre (2015) Manufacturer: DMG Model: DMU 65 Monoblock Year of manufacture: 2015 Condition: Used, very good, still in production. Power-on hours: 21,336 h Spindle hours: 7,112 h Control: Heidenhain iTNC 530 X-axis: 735 mm Y-axis: 650 mm Z-axis: 560 mm Tool holder: SK40 Spindle speed: 10,000 rpm Kjdpfxex Iwb Ie Af Sefa Chip conveyor Internal coolant supply (IKZ) 40 bar Band filter system 3D probe Documentation Additional accessories optional.

Condition: good (used), Year of construction: 2001, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, For sale is a machining center with Gentry design of the DMC brand and type 65V linear Particularly noteworthy is the high-speed spindle with 18,000 rpm The machine is in good condition and fully functional Technical data Kfodpfx Afot I Tpls Ssa Commissioning: 2001 Control: Heidenhain TNC 430 i Table size: 850x600 mm Tool holder: SK 40 Tool changer: 30-fold Travel X/Y/Z: 650x500x500 mm Max. speed: 18,000 1/min Feed rate max: 60 m/min Dimensions lxwxh: 2650x2700x2500 mm Weight: 10,500 kg On request, for an extra charge, dismantling, loading & transport can be organized for you throughout Europe Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), grinding stone, grinding pin -Recording: M12 -Outer diameter: 50 mm -Length: 65 mm -Quantity: 74 pieces Kjdjb A Nc Ropfx Af Sofa -Sale: only complete set -Weight: 28 kg

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery: 01x CS Sigma profile, used material color: sendzimir galvanized profile length: approx. 1.650 mm CS Sigma: approx. 200 x 65 x 18 mm material thickness: approx. 1,50 mm weight / pcs.: approx. 7,500 Kg Remark: The pictured angles are not part of the offer. General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Kfodpohwduxjfx Af Sja Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: new, Eaton XN-2AI-PT/NI-2/3 input module SN 42369-65 Part No. 140067, unused in opened original packaging, 100% functional, scope of delivery as per photos Kfjdpfxepnpl Hj Af Sea

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: 65 mm -Piston rod: Ø 45 mm -Stroke: 600 mm Ksdjb A Sh Dopfx Af Sefa -Piston rod mounting: M30 x 1.5 mm - universally applicable: can be used -Quantity: 1 cylinder available Price: per piece -Dimensions: 110/1430 mm -Weight: 30 kg/piece

Condition: good (used), Technical data for the pallet rack upright: Racking system: Bito Kedpfjh Svtpex Af Ssfa Type: PL 38 Included in delivery are: 01x pallet rack upright, used Material color: sendzimir galvanized profile dim.: 90 x 65 x 1,80 mm Profile type: SP18 Incl. cross and diagonal braces, Base plates The stands are pre-assembled ( screwed truss ) 2.030 mm high 1.100 mm deep

Condition: new, Hilscher KPO 104-DPM Profibus-DP module , unused in opened original box, 100% functional Kodsi Ea I Nspfx Af Sjfa

Condition: good (used), Plug Kfedpfsb A Rpbjx Af Sea -Type: SACC-M12FR-5CON-PG9-M -Quantity: 65x Available Price: complete -Weight: 4.5 kg

Condition: like new (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery: 01x CS Sigma profile, used material color: sendzimir galvanized profile length: approx. 1.400 mm CS Sigma: approx. 200 x 65 x 18 mm material thickness: approx. 1,50 mm weight / pcs.: approx. 6,500 Kg Remark: The pictured angles are not part of the offer. General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Kodpfxjhwdu Hj Af Sefa Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: ready for operation (used), Siemens 1FT5062-1AF71-4EB0 permanent magnet motor SN EF186446104001 + HE-65-M rotary encoder, used, minor signs of wear, 100% functional, scope of delivery as per photos Kedpfxsmbr Ire Af Sefa

Condition: good (used), The scope of delivery includes: Kfsdoi Enyuopfx Af Soa 01x Shelf connector, used Shelf system: Nedcon type: NS suitable for frame profile width: 100 mm for shelf distance: 300 mm profile dim.: U 65 x 40 mm weight: 0,83 kg | pcs.

Condition: ready for operation (used), Siemens 1FT5066-1AF71-4EB0 permanent magnet motor SN EF186519101002 + HE-65-M rotary encoder, used, normal signs of use, 100% functional, scope of delivery as per photos Kjdpfx Afjl Ucypj Sofa

Condition: ready for operation (used), Bosch BA 400 Euro Module PCD 52 DP DC-DC Converter, used, 100% functional Kfodei D T Tpepfx Af Sea