Used Gesan Dvs 200 for sale (16,348)

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 1,300 h, lifting height: 20,000 mm, fuel type: diesel, TRUCK MOUNTED PLATFORMS Multitel MXE 200 Dwodpfxoz Dixro Akcec Year 2021 Working height 20 meters Horizontal outreach 9 meters Basket capacity 200 kg Hours 1300 km 24.000 Excellent conditions Complete of all documents and ex Inspected and refurbished by MULTITEL service provider

Condition: ready for operation (used), functionality: fully functional, total length: 3,000 mm, total width: 1,500 mm, total height: 1,750 mm, spindle speed (max.): 2,300 rpm, spindle speed (min.): 1 rpm, type of input current: three-phase, overall weight: 1,800 kg, The lathe runs and operates very well. A video of the machine in operation can be sent upon request. In addition, all possible manuals for this lathe are included. Damage: - A piece has broken off the tool holder, but this does not affect the operation. Djdpsz Dlbiofx Akcowc One connector on the rear is broken and needs to be replaced.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: RC 14-43, power: 810 kW (1,101.29 HP), GLASTON RC200 2136-380-R - Tempering furnace, 2100 x 3600 mm Group: Tempering - With convection (Low-e) Process: Tempering furnace, 2100 x 3600 mm Code: 90010x7 Manufacturer: GLASTON Model: RC200 2136-380-R Year of manufacture: 2014 Condition: As is Tempering furnace Dedpfjz D Ic Njx Akcewc - Maximum glass size: 2100 x 3600 mm - Minimum glass size: 100 x 250 mm - Glass thickness: 4 - 19 mm - Total power: 810 kW - Vortex Plus convection system (top) - Technical description can be found in the appendix as technical data - In good working condition, still in operation - In very good and clean condition - As is - Immediately available Dismantling and installation can be carried out by our service team upon request.

Condition: used, Year of construction: 2005, Mazak QTN 200 lathe, year of manufacture 2005 Mazatrol 640T Djdsxgpqpspfx Akcjwc 210 mm Kitagawa BB 208 chuck Spindle bore 65 mm Turning length 500 mm Turning diameter 380 mm Tailstock Tool probe

Condition: new, Hello, Dodpezx Upzjfx Akcjwc I would like to offer high-pressure KSB pumps with ABB electric motors. Applications for the pumps: - Chemical industry - Fuel industry - Gas industry - Paper industry I have various models available: - 5 units: MCPK150-125-200 VX LXM - 5 units: MCPK065-040-200 VC EXM - 2 units: MCPK100-065-200 VC LXM - 2 units: MCPK080-050-315 VC EXM The stated price is for 1 complete pump with motor, model MCPK150-125-200 VX LXM. If you are interested in a different pump model, please contact me.

Condition: used, mileage: 12,850 km, power: 90 kW (122.37 HP), first registration: 05/2025, fuel type: electric, overall weight: 2,550 kg, fuel: electricity, color: black, gearing type: automatic, suspension: steel, number of seats: 5, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, traction control, E07 Hill-start assist, F2W Winter package, EY5 Mercedes-Benz emergency call system, SD1 i-Size child seat mounting, EY6 Breakdown assistance, B25 Parking brake, electric, EI0 Wireless charging system for mobile devices, T68 Child safety lock for doors and windows in the passenger compartment, Z1M Approval M1, IA0 Wheel formula 4x2, LG7 LED High Performance headlights, XO7 Mercedes-Benz Mobilo with breakdown assistance and extended warranty, EZ7 Active parking assist, R2H 40.6 cm (16) light alloy wheels in multi-spoke design, T78 Sliding door rail cover in vehicle color, Y10 First-aid kit, 804 AEJ X3/1, VL2 Velour floor mats, SF6 Driver's seat, height-adjustable with lumbar support, RD9 Tires without specified manufacturer, H00 Warm air duct to the passenger compartment, NM5 MB-NA 60 2b with flange, low mounting, M-engine speed, C6L Multifunction steering wheel, H10 Seat heating for driver and front passenger, H22 Heated rear window, EM7 2 USB ports in the center console at the rear, Y44 Warning triangle, GA2 Automatic transmission for electric drive, P2F Active safety package, FP3 Mirror package, FP4 Chrome interior package, XC8 VIN visible from the outside, SZ6 Table and illuminated trim elements on the backrest, Z6L Progressive, JH3 Communication module (LTE) for digital services, X30 Vehicle registration certificate, part II, X2W Weight variant 2,550 kg, FQ3 Glove compartment, passenger side, closed, I5T Underbody protection, plastic, RY2 Tire pressure monitoring system on front and rear axle, wireless, CK4 Handle strip above license plate in vehicle color, 054 AEJ X3/2, CK8 Heated steering wheel, XU1 Labels / printed materials in German, IG4 Standard, SK5 Automatic front passenger airbag deactivation, I6I With seat belt, center seat in the rear, W29 Fixed rear windows, CL1 Steering wheel adjustable in inclination and height, CL3 Leather steering wheel, FR8 Rear, We are available by phone Monday - Friday until 8:00 PM and Saturday until 4:00 PM!! Furthermore:!! Leasing/financing and trade-in possible!! !! !! -Errors and prior sale excepted!! Dwedpfx Akjzqt T Aocec -All information without guarantee ... more on our homepage

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 180 h, load capacity: 250 kg, empty load weight: 2,782 kg, construction height: 1,998 mm, fuel type: diesel, total length: 5,324 mm, drive type: Diesel, arm reach: 8,500 mm, construction width: 780 mm, working height: 20,000 mm, Track-mounted aerial work platform Dwsdpfx Aowx Txqjkcoc Technical condition: very good Battery condition: very good Description: Our equipment is regularly serviced and inspected. We offer rental, sales, service, and repair – you can get everything you need from a single source. We also offer lease-to-own options, financing, and the purchase of used machinery. Our team will be happy to provide you with competent and personalized advice. Just call us or send us a message via SMS or WhatsApp. The CTE TRACCESS 200 diesel is a compact track-mounted aerial work platform for working at height in confined spaces, on sensitive surfaces, or in challenging terrain. With a working height of up to 20 m, a lateral reach of up to 8.5 m, and track chains, this machine is ideal for assembly, maintenance, and tree care work, even in hard-to-reach locations. Compact, all-terrain capable, and easy to operate. You can find more information and submit a non-binding inquiry on our website – safe working at any height.

Condition: like new (used), TETRA PAK CARDBOARD PACKER CBP 32 Dwedpfx Aeya I Sgekcjc VERSION 400 YOM 2010 2177 RUNNING HOURS ONLY!! MULTI PACKER FOR 200/250/1000 ml AS NEW CONDITION LOCATION - POLAND READY FOR SHIPPING

Condition: used, Year of construction: 2011, mileage: 265,853 km, power: 243 kW (330.39 HP), first registration: 01/2011, overall weight: 19,000 kg, fuel type: diesel, color: green, axle configuration: 2 axles, gearing type: mechanical, emission class: euro5, loading space volume: 9 m³, Equipment: ABS, air conditioning, Internal vehicle number: G300460 Available immediately at our yard in Kaufungen More information at: Luis Lucena Viktoria Sologubova Mercedes-Benz Axor 1833 4x2 road sweeper VAL?AIR – 9 m³ – 200 bar high-pressure system Mercedes-Benz Axor 1833 road sweeper, manufactured in 2011, featuring a VAL?AIR sweeper body, a 9 m³ debris container, and a high-pressure cleaning system with a pressure of up to 200 bar. The vehicle is equipped with a 330 hp diesel engine, a manual transmission, and air conditioning. Technical specifications: * Vehicle number: G300460 * Vehicle condition: Used * Category: Road sweeper / municipal vehicle * Manufacturer: Mercedes-Benz * Model: Axor 1833 * First registration: 01/2011 * Year of manufacture: 2011 * Mileage: 265,853 km * Fuel type: Diesel * Drive type: Combustion engine * Engine displacement: 7,201 cm³ * Power output: 243 kW (330 hp) * Transmission: Manual transmission * Emissions class: Euro 5 * Environmental badge: 4 (Green) * Axle configuration: 4x2 * Number of axles: 2 * Permissible total weight: 19,000 kg * Unladen weight: 12,625 kg * Payload: 6,375 kg * Color: Green/white Sweeper body: Djdpfxoyfy Ane Akcswc * Manufacturer: VAL?AIR * Debris container capacity: approx. 9 m³ * High-pressure cleaning system * High-pressure output: up to 200 bar * Suction sweeping system * Hydraulically driven rotary brushes * Sweeping unit located beneath the vehicle * Rear discharge via tilting debris container * Suitable for street, area, and municipal cleaning Equipment: * Air conditioning * Manual transmission * Work lights * LED warning bar on the cab * Rear rotating beacon * Striking red and white safety markings * Exterior mirrors with wide-angle mirrors * Municipal vehicle equipment * Steel rims Inspection and functional testing are possible after prior arrangement. Further information, photos, and videos are available upon request. Errors, changes, and prior sale are subject to change.

Condition: excellent (used), Year of construction: 2008, Mossini press Servo drive Pressing force 2,000 kN Stroke adjustment 20 - 100 mm Stroke rate 30 - 90 strokes/min Ram adjustment 100 mm Tool installation height 455 mm Year of manufacture 2008 Includes Kohler conveyor system. Dedsz Dxh Aspfx Akcswc

Condition: used, Year of construction: 2007, MAZAK TURNING CENTRE TYPE INTEGREX 200 IV S - 1000 mm The machine is supplied in standard configuration and equipped with the following options: - Through‑spindle coolant 15 bar - Synchronized tapping with milling spindle - Cylindrical interpolation and polar coordinates - 40‑tool magazine Capto C6 - Preparation for visual tool (visual tool probe) - Form/geometry compensation for rotary axes - 3D coordinate conversion - Management of rapid traverses - Preparation for flash tool (tool‑change flash tooling) - Simultaneous 5‑axis functions - Tool pivot point management - 5‑axis tool radius compensation - Part catcher (automatic part collector) - Double clamp pressure on the secondary spindle - Overload detector Maximum swing 660mm Dwodpfx Akszuy Tdococ Swing over cross slide 660mm Swing during Y-axis process 660 to 500mm Maximum machining diameter 660mm Through-hole diameter 76mm

Condition: excellent (used), Year of construction: 2011, operating hours: 361 h, functionality: fully functional, machine/vehicle number: 7428122100001.105, pressure: 6 bar, power: 16,500 kW (22,433.73 HP), temperature: 120 °C, operating temperature: 120 °C, total height: 4,300 mm, total length: 8,700 mm, nominal heat output: 165 kW (224.34 HP), total width: 3,700 mm, tank capacity: 33,500 l, empty load weight: 35,000 kg, We offer this Viessmann VITOMAX 200 hot water boiler in very good condition, manufactured in 2011. It is currently stored and preserved with nitrogen. Dodpfx Akszlc Edocewc Manufacturer: Viessmann Model: VITOMAX 200 Year of manufacture: 2011 Type: hot water boiler Operating hours: 361 If you have any further questions or require additional information, please do not hesitate to send us a message or call us. Ioan Munteanu

Condition: like new (used), Grundfos NB 32-200/206 Single-stage block pump, centrifugal pump Speed: 2915 min⁻¹ Flow rate Q: 33.7 m³/h Head: 46.3 m Max. pressure: 16 bar You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. Dodpfx Akszzllxocjwc The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: used, Technical details: weight: 400 kg number of strokes: - Hub / Min Dwjdpfx Aozxxftekcec Torque: - kp dimensions L x W x H: 1,24 x 0,84 x 1,0 m For sale is an extensive package of high-quality tool holders, clamping devices, fixtures and accessories from the inventory of a Gleason-Pfauter P200 gear hobbing machine. The package comprises a large number of precision-manufactured components in various designs and dimensions, including: ·Various workpiece fixtures and clamping devices ·Precision clamping and locating mandrels ·Various clamping sleeves and clamping bodies ·Mounting and adapter rings in various diameters ·Tool holders and tooling fixtures ·Form/clamping jaws and associated interchangeable elements ·Various precision fixtures manufactured by the German manufacturer BUNA ·Various special-purpose fixtures and adapters ·Extensive additional accessories as shown in the pictures Among the items included is a marked BUNA precision fixture No. 2457368.0, Ø32, A5, Made in Germany. *

Condition: used, Year of construction: 2012, fuel type: diesel, Lifting capacity: 230 kg Dedpfx Akszqkatecjwc Please contact Gebrauchtgeräte Center for more information

Condition: new, functionality: fully functional, power: 197 kW (267.85 HP), fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO MCC-200 is small efficient model of CC series, those are a mobile type & closed circuit crushing and screening plants that is used for processing of hard materials such as basalt, granite, gabbro, dolomite and other types of hard stones. TECHNICAL SPECIFICATIONS: -Bunker: 15m3 -Production Capacity: 150-250 Tons Per Hour -Crusher Type: Cone Crusher -Maximum Feeding Size: 180mm -Vibrating Screen Size and Deck: 1700x4500mm 3-4 decks -Total Motor Power: 197 kW MCC-200 is a combination of: • Bunker(Hopper) • Vibrating Feeder • Cone Crusher • High Stroke Type Vibrating Screen Dodez E Rg Tjpfx Akcewc • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), Year of construction: 1994, Low-speed machine with hydraulic moving floor. Rotor width: 840 mm. Motor: 18.5 kW. Hopper with lid included. Ready for operation. Only 3400 operating hours. Dwedpfxex Ilp Ho Akcjc

Condition: excellent (used), CATALOGUE NUMBER 7908 TECHNICAL DATA - tool diameter, Wescott chuck 0-20mm - max. hole depth 155mm - max. milling length 250mm - adjustment via drilling unit, forward/backward, right/left + angle - table adjustment, up/down - table swivel angle 0-45˚ - working table dimensions 600x320mm - four-point cutting head 16-22-25-32mm - 2 material clamps - motor power 2.2kW - dimensions L/W/H 1050x800x1250mm - weight 200kg Dedpfx Aozr I H Tokcowc ADVANTAGES - German made - very good condition - eccentric clamps, 2 pieces - unpainted - used drilling machine Net price: 6500 PLN Net price: 1510 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total length: 5,650 mm, total width: 1,600 mm, total height: 2,520 mm, overall weight: 1,500 kg, input frequency: 50 Hz, type of input current: AC, input voltage: 400 V, vertical glass wasching machine 1600 mm OPEN TOP working direction : from LEFT to RIGHT min. glass size : 350 x H100 mm max. glass weight : 200 Kg in- en outlet conveyor size : 2000 mm working height : 550 mm glass thikness : 3 - 15 mm number of brushes : 4 Dwsdpfjz Dt Rfjx Akcec brushes diameter : 120 mm speed : 0,5 - 5 m/min . total power : 7 kw machine body in stainless steel

Condition: good (used), Year of construction: 2004, TURNING AND MILLING CENTER MAZAK INTEGREX 200 IV ST THE MACHINE IS IN GOOD CONDITION, VISIBLE AT OUR WAREHOUSE IN VILLORBA 20 TOOLS AND HIGH PRESSURE SYSTEM 20 BAR Producer MAZAK Model INTEGREX 200 IV S Dwsdpfx Aoiz Tmgokcoc Year 2007 Used condition Location Treviso, Italy Price Category Multitasking Machines Subcategories Stock number 633 Serial number 216700 Matrix governing unit Maximum workable length 1050 mm Maximum workable diameter 660 Bar passage 51 Main spindle diameter 210 Main spindle power and revolutions 22 KW 5000 rpm C axis 360° Counter spindle chuck diameter 210 Counterspindle power and revolutions 18.5 KW 5000 Rpm C axis on the 555 counter spindle X-axis (travel) 580 Y axis (strokes) 160 Z axis (strokes) 1050 B axis (strokes) 225° Milling spindle power 18.5 kW Milling spindle speed 12,000 rpm CAPTO C6 spindle mount Maximum warehouse capacity 20 UT High pressure system through the spindle 20 BAR Chip conveyor Si carpet

Year of construction: 2020, condition: excellent (used), functionality: fully functional, USED YAMAZAKI MAZAK HORIZONTAL MILLING AND TURNING CENTER INTEGREX J-200 X 500 with Smooth G CNC - 36-tool magazine package (500U) - 15 kW AC turning spindle power Dodpsz Ihmpofx Akcjwc - B-axis with mechanical locking every 1° - 15 bar coolant through the milling spindle and onto the flange - Lateral chip conveyor with belt (500U) - High/low pressure selection (requires opening/closing of the chucks with the spindle stopped) - Radio probing system - Renishaw RMP60 (complete system including probe and Mazatrol probing cycles, excluding the Renishaw "Inspection Plus" software) - SEI FILTRATION system - Tooling and mandrel kit Complete with operating manuals, CE certification, and standard accessories.

Condition: new, Year of construction: 2020, power: 85 kW (115.57 HP), gearing type: other, driver cabin: other, Vehicle location: Bovenden Maximum output in kW: 85 RPM: 1000 Dwodpfoz Hd T Nox Akcsc Maximum pressure: 150 bar New, from stock, manufactured in 2020! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 173600 € 3281.04 € 200 to 7 mm 1350 mm 800 mm 250 mm 18 - 180 mm 35 - 50 1/min 900x570 mm 8 110 mm 410 mm 820 mm 22 kW 1500 mm 2633 mm 3950 mm 20000 kg touch screen control semi automatic stroke adjustment die space adjustment with mechanical display decimal resolution Dsdpfx Ajyq Squjkcowc adjustable motor speed overload protector automatic cams reset double bolster plate oil circular lubrication dynamic brake safety light guard Keyence Automation and control of press parameters by PLC, alarms and informations displayd on human machine interface touch screen. Standard monitoring: - press speed view and adjustment - programmable piece counter and maintenance piece counter - die space adjustment with brake motor - Semi automatic or automatic stroke adjustment - die safety control - alarms view - overload protector PRICE FCA ITALY

Condition: excellent (used), Year of construction: 2008, CNC machine for applying Stellite to the teeth of bandsaw blades / Type GPA200 Stellite application machine Technical data for bandsaw blades: Blade width: 80 - 360 mm Blade length: 6 - 18 m Blade width: 35 - 100 mm Blade thickness: > 0.6 mm Technical data for frame saw blades: Blade width: 80 - 200 mm Blade thickness: > 1.6 mm Tooth pitch length: < 1700 mm Technical data for mini frame saws: Blade width: > 35 mm Blade thickness: > 0.5 mm Tooth pitch length: < 700 mm Dedpfx Aez Hdqbokcewc Rake angle: 10 - 40° External compressed air supply: < 6 bar Stellite diameter: 0.76 - 4 mm Working speed in teeth/minute: < 10 teeth/min Welding unit - large burner Current: < 150A, operating mode: Mono-gas/Bi-gas, plasma gas flow rate: 1.5 - 2 l/min, shielding gas flow rate: 5 - 8 l/min Welding unit - small burner Current: < 120A, operating mode: Mono-gas/Bi-gas, plasma gas flow rate: 0.2 - 0.6 l/min, shielding gas flow rate: 2 - 4 l/min Additional slider

Condition: ready for operation (used), Year of construction: 2009, operating hours: 15,600 h, functionality: fully functional, machine/vehicle number: 216615, turning length: 995 mm, turning diameter over cross slide: 660 mm, turning diameter: 660 mm, spindle motor power: 22 W, spindle speed (max.): 12,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, milling spindle length: 30 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 35 rpm, feed length X-axis: 580 mm, feed length Y-axis: 160 mm, feed length Z-axis: 1,045 mm, torque: 468 Nm, bar passage: 76 mm, total height: 2,500 mm, total length: 7,000 mm, total width: 2,000 mm, distance table center to spindle nose: 1,234 mm, overall weight: 9,760 kg, spindle diameter: 76 mm, feed force X-axis: 38 N, feed force Y-axis: 26 N, feed force Z-axis: 38 N, Equipment: documentation/manual, rotational speed infinitely variable, MAZAK INTEGREX 200-IV / 200-IVS Chuck size: 8 inches Max. swing diameter: Ø 660 mm Max. machining diameter: Ø 660 mm Max. machining length: 995 mm Max. bar capacity: up to Ø 65 mm Main spindle: Spindle speed: 35–5,000 rpm Main spindle motor power: 22 kW Spindle bore diameter: Ø 76 mm Milling spindle: Dwsdpfx Aksz A Huhscjc Spindle speed: 15–12,000 rpm Milling spindle motor power: 18.5 kW Max. torque of the milling spindle: 119 Nm Max. milling tool size: Ø 125 × 300 mm Travel ranges: X-axis: 580 mm Z-axis: 1,045 mm Y-axis: 160 mm