Used Gesan Dvs 200 for sale (16,349)

Year of construction: 2019, condition: ready for operation (used), Two Linde high-pressure tanks are available for the storage of hydrogen (GH2/GHe). Diameter: 2000mm, height: approx. 10600mm, wall thickness: 100mm, usable volume: 21.9m³/3600Nm³, max. operating pressure: 200bar, medium weight hydrogen/helium: 305kg/465kg, empty weight: 45000kg. Documentation available. On-site inspection is possible. Djdpjwxd Uvjfx Af Deun

Year of construction: 2014, condition: ready for operation (used), A two-component injection moulding machine Engel with piggyback configuration, including Engel Viper 40 robot and safety enclosure, is available. Clamping force: 1800kN, nozzle diameter: 35mm, min. mould installation height: 270mm, max. platen distance: 1020mm, tie bar spacing: 980mm, centering: 180mm. Screw diameter 1/2: 22mm/15mm, injection pressure 1/2: 2392bar/2203bar, injection weight 1/2: 66g/19.5g. Robot year of manufacture: 2014, robot travel X/Y/Z: 700mm/1300mm/2360mm. Machine dimensions X/Y: approx. 6700mm/2100mm, control: CC400, operating hours: approx. 38567h. The 22mm screw needs to be replaced. Without conveyor belt. Documentation available. An on-site inspection is possible. Duodew Hth Iopfx Af Don

Year of construction: 1991, condition: ready for operation (used), A Hämmerle hydraulic press brake is available. Pressing force: 2000kN, working length: 2600mm, installation height: 830mm, stroke: 265mm, throat depth: 300mm, rapid traverse: 100mm/s. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 16000kg. The machine is not functional. Documentation available. On-site inspection is possible. Dusdpfxow A R Spe Af Den

Condition: ready for operation (used), Year of construction: 2006, A single-spindle pick-up lathe is available, max. swivel diameter: 130mm, spindle in front bearing: 90mm, max. chuck diameter: 160mm, weight: 10t, operating hours: approx. 88,000h, with documentation, an on-site inspection is possible. Dusdperdhh Iefx Af Dsn

Year of construction: 1978, condition: ready for operation (used), An oil-hydraulic press brake built in 1978 is offered, max. pressing force: 2000kN, max. stroke: 250mm, max. operating pressure: 295bar. Control panel defective. Viewing is possible by arrangement. Dedpfx Aox Aunfof Deun

Year of construction: 2001, condition: ready for operation (used), Working length: 2040mm, max. cutting capacity: 3mm, stroke rate: 30strokes/min, table height: approx. 850mm, back gauge: 750mm. Machine dimensions X/Y/Z: approx. 2400mm/2000mm/1450mm, weight: approx. 1500kg. An on site inspection is possible. Dodpfx Aex Hz Nyef Deun

Year of construction: 2006, condition: ready for operation (used), Turning diameter: 220mm, main spindle bore: 65mm, counter spindle bore: 60mm, tool positions: 12, Y-axis travel: 120mm, gripper diameter range: 4mm-45mm/40mm-65mm, coolant pump pressure: 8bar, high-pressure pump output: 80bar, chip conveyor discharge height: 1250mm. Overall system dimensions X/Y/Z: approx. 9150mm/3000mm/2000mm, weight: approx. 9500kg, control system: Siemens 840D, operating hours: approx. 115000h. Including multi-channel loading magazine Breuning/IRCO PROFImat 65.8-PR270/8, portal unloading unit, chip conveyor, coolant system, high-pressure pump and spare parts. Documentation available. On-site inspection is possible. Expected to be available from May 2026. Dujdpfeyfv Nqex Af Djn

Year of construction: 2014, condition: ready for operation (used), A mobile extraction and filter unit Höcker is available. Filter class: H3, motor power: 4kW, suction connection: 200mm, filter surface area: approx. 12m², max. volume flow: 3400m³/h, max. negative pressure: 2700Pa, collection container volume: 350l, machine dimensions X/Y/Z: approx. 2000mm/1100mm/2000mm, weight: approx. 420kg. On site inspection is possible. Dedpfxjyg Nu No Af Dsun

Condition: ready for operation (used), A slant bed lathe Traub Sonim is available. Turning diameter over bed/cross slide: 350mm/160mm, turning length: 200mm, speed: 5000rpm. Machine dimensions X/Y/Z: approx. 3200mm/1500mm/1700mm, weight: approx. 3500kg. An on-site inspection is possible. Duodpfx Afeyfhmho Don

Condition: used, Year of construction: 2019, functionality: fully functional, FLOW Waterjet Mach 200 4020 Construction Year 2019 - fully functional Axis Movement: X-Axis: 4.000 mm Y-Axis: 2.000 mm Z-Axis: 200 mm Ausstattung: - 1x Cutting Head 5-Axis - Flow CAD/CAM - Abrasive tank - manual pump for tank cleaning - High pressure Flow Hyplex Duodsyfhnrepfx Af Den

Condition: good (used), Year of construction: 2000, Turning diameter 200 mm Duedpjydm Tdjfx Af Den Turning length 400 mm Control: SIEMENS SINUMERIC Number of spindles: 2 Tool changer: 2x 14 Total power requirement: 39 kW Machine weight approx. 4,800 kg Without bar feeder, machine is integrated in automatic operation Machine is still powered. Videos of the machine's functionality are available and can be provided upon request.

Condition: used, Year of construction: 2013, Technical details: turning diameter over bed: 284 mm turning length: 406 mm x-axis: 218 mm longitudinal traverse (z-axis): 406 mm control: Siemens 828D revolution per minute: 5000 U/min spindle bore: 62 mm max. torque on the spindle: 125 Nm rapid motion - x-axis: 30 m/min rapid traverse Z-axis: 30 m/min tool turret - number of stations: 12 Stationen / Stations Weight approx.: 2,8 t Duodpfx Aoydddtjf Don dimension machine xH: 3,10 x 1,40 x 2,29 m dimension L-W-H: Späneförderer: 3400 x 1150 x 2180 mm

Condition: used, machine/vehicle number: 008170, X axis working area: 4300 mm Y axis working area: 2250 mm Dujdpfx Asx A Tcuof Djn Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Total number of drilling spindles: 12 Total number of tool changer positions: 14

Condition: good (used), Year of construction: 1993, with oil filtration system Dujdpfx Aeydldhjf Don Unfortunately, no further technical data is available.

Condition: good (used), Year of construction: 2002, Pig slaughterhouse, approx. 200 animals/hour. Location: 26215 Wiefelstede/ Germany The plant has been disassembled into individual parts. -consisting of the following components: -1): 1x Rider seat retainer with automatic cardiac/brain anesthesia, Banss color, type LVR-8940L -2): 1x bleeding plate conveyor, make Banss, type EFB -4): 1x plate conveyor type PB-1500 -5): 2x flame/hygiene flame oven, make Banss, type BF2 -6): 1x Dry whipping machine, manufacturer Banss, type T3S -7): 1x Whip washing machine, manufacturer Banss, type AW -8): 1x Pre-wash machine, manufacturer Banss, type V3S -9): 1x condensation brewing tunnel, make KBT-220 -10): 1x Continuous hair removal machine, manufacturer Banss, type 300-2/1 -11): 1x cable lot -12): 1x bleeding and brewing tunnel conveyor -13): 1x internal conveyor -14): 1 Slaughter conveyor -15): 1x PLC controller, manufacturer Siemens, type S7-414-2DP -16): 1x Weighing rail conveyor, manufacturer Banss, type WSF560 Li -17): 1x evaluation terminal, manufactured by Bizerba, type Banss, type ST(SWE) -18): 1x overhead conveyor scale, manufacturer Bizerba type ST(NSW) -19): 1x empty hook conveyor system for slab conveyor, manufacturer Höcker -20): 1x steam generator, manufacturer Certuss, type Universal 1300 oil -21): 1x intestinal feces separator, make Itec, type 300 -22): 1x rotary lobe pump, manufacturer Itec/Vogelsang, type VX136/186Q -23): 1x pump for bowel transport -24): 1x Typhoon packaging transport system for raw meat, manufactured by MariMatic, type E0800-150-200FB -25): 1x ejector, manufacturer MariMatic, type TF852 -26): 1x separator, make MariMatic, type 200 L -27): 6x suction points with slide valve, manufactured by Stafsjö, type DN150 Duodpfx Afsh Db Hcs Djn -28): 1x shaft cabinet, manufacturer MariMatic, type S5-200 -29): 1x car marker, make Carometec Food Technology -30): 1x Item Box Stall -31): 1x lot of pipework -32): 1x Item of drawings/operating instructions, circuit diagrams -34): 1x supporting structure Individual components can be sold separately; please inquire.

Condition: good (used), Year of construction: 2000, Parts shown by hand not come. Tool cabinet and cutting tools not come. Only tool holders will come. Djdpfx Afsx Atyae Deun

Year of construction: 1999, condition: ready for operation (used), There are two identical Emag VSC 200 available, x-travel: 685mm, z-travel: 160mm, chuck diameter: 200mm, circumferential diameter: 290mm, connected load: 29kW, controls: SIEMENS SINUMERIK, length: 2700mm, width: 1150mm, height: 2800mm, weight: 6.5t, with documentation. Djdpfxjm H Urhs Af Dsun

Condition: ready for operation (used), Memory: 128MB, including controls. Dusdsk Adg Tepfx Af Den

Condition: ready for operation (used), Max. power: 4000W, max. compressed air supply: 6ar, with Conveying System APS/ALS and Chiller Hyfra LWK 31/1-S. Dsdjixqkzopfx Af Dsun

Year of construction: 1992, condition: ready for operation (used), Working length: 4300mm, pressing force: 2000kN, connected load: 15kW, weight: 18t, including tools. Duodpfx Afsi Dx Sbo Den

Condition: used, Year of construction: 2015, Brand: Piovan Type: Dryer HR2000651 Model: HRM200 Serial No.: 08 020 044/07 0135 Dry Air Quantity: 200 m³/h Hopper capacity: 3 × 300 dm³ Connected load max: 38 kW Year of manufacture: 2015 and Model: PTUSET Dedpfx Aexvdh Isf Deun Year of manufacture: 2017 Connected load max: 9.0 kW

Condition: ready for operation (used), Leadscrew & feedscrew lathe GEMA LZ 200 from educational institution Dodpfx Asyh Hrxof Deun - Three-axis digital readout "NEW" - Guides in perfect condition - Center height: 200 mm - Distance between centers: 1000 mm - Spindle bore: 54 mm - Swing over bed: 400 mm - Swing over cross slide: 200 mm - Speed range: 36 – 2200 rpm - Automatic longitudinal / cross feeds - Tailstock MK4 – quill stroke 200 mm - Three-jaw chuck 250 mm - Electric chuck guard - Multifix toolpost with inserts - Coolant system - Work light - Chip tray - Machine feet Dimensions: LxWxH 2x1.2x1.6 meters / Weight: 1800 kg Subject to errors and input mistakes.

Condition: used, Year of construction: 2000, Year of manufacture: 2000 Control: Mazatrol 640 Documents included Chip conveyor TECHNICAL DATA – MAZAK INTEGREX 200SY Performance / Capacity Max. swing: Ø 540 mm Chuck size: 8" Max. machining diameter: Ø 540 mm Max. machining length: 1018 mm Max. outside diameter for bar material: Ø 51 mm Main spindle Spindle nose: JIS A2-6" Spindle bore diameter: Ø 61 mm Spindle speed: 35 – 5000 rpm (Standard) / 35 – 4500 rpm (Option: 5000)* Motor power (30 min. rating): 22 kW (18.5 kW*) Max. torque: 350 Nm (35.7 kgf·m) Sub spindle (counter spindle) Spindle nose: JIS A2-6" Spindle bore diameter: Ø 44 mm Spindle speed: 35 – 5000 rpm Motor power (10 min. rating): 7.5 kW Max. torque: 57 Nm (5.8 kgf·m) Turret / Tool data Turret type: With ATC, spindle turret External turning tool size: □ 25 mm Internal turning tool size: Ø 40 mm Milling tool: Max. Ø120 × 250 mm length Indexing time (90°): 0.5 s Milling spindle speed: 15 – 6000 rpm (Option: 10000) Dodpfjyh E Irex Af Dsun Milling spindle motor power: 7.5 kW Max. milling spindle torque: 62.29 Nm (6.35 kgf·m) Feed axes X-axis: Travel 530 mm / Rapid traverse 30,000 mm/min Z-axis: Travel 1065 mm / Rapid traverse 33,000 mm/min Y-axis: Travel 140 mm / Rapid traverse 15,000 mm/min Z2-axis: Travel 1005 mm / Rapid traverse 20,000 mm/min Media / Control Coolant tank volume: 250 L Power consumption (continuous): 32.7 kVA Machine dimensions / Weight Overall length: 3485 mm Overall width: 2105 mm Overall height: 2416 mm Weight: 73,575 N (7,500 kgf)

Condition: as good as new (ex-display), BIA class H Dedpfoyhn Svox Af Djun

Condition: excellent (used), Year of construction: 2001, You are bidding here on a brand-name guillotine shear from the well-known German manufacturer Schechtl. Device features: - Shear model: MSB 200 - Cutting capacity: according to the nameplate, up to 3mm steel; considerably more for aluminium - Working length: slightly over 2m - Manual backgauge: 500 mm - Side/angle stop - Foot pedal operation - Weight: approx. 1.3 t The condition is absolutely excellent and extremely rare. The price is a little less than half of the original new price (price list is from last year, 2024). Optionally, we also have further machines in stock, such as the Schechtl MAX 200 (2.5mm), Schechtl MA 200 (2mm), HA 2mm, KSV 1.5mm, and KS 1mm, as well as folding machines and shears from RAS, Schröder, etc. Current net price for a new unit – see photos (2024–2026 prices are significantly higher). You will receive an invoice with VAT shown separately. Transport/shipping can be arranged upon request; forklift is available on site. Free loading as shown in the pictures. Viewing and testing of the machine can be arranged by telephone appointment. Payment in cash upon collection. If you need anything else, please feel free to call me. Thank you. Dusdpfjyh Nqkex Af Den Collection should take place within 8 days after the end of the auction. Location: 97249 Eisingen (3 minutes from the motorway) Item number: MSB 260106