Used Bernardo Ebs 150 G for sale (210)

Condition: new, cutting diameter 225 mm saw band length 2480 mm table height 910 mm capacity 90 degrees: flat 245 x 150 mm capacity 90 degrees: square 200 x 200 mm Psdpfx Aboxaa Tboaorc capacity 45 degrees: round 160 mm capacity 45 degrees: square 160 x 160 mm capacity 60 degrees: round 100 mm capacity 60 degrees: square 100 x 100 mm turning speed range: 45/90 m/min dimensions of saw-band 2480x27x0,9 mm total power requirement 1,5 kW weight of the machine ca. 200 kg dimensions of the machine ca. 1430x720x1700 mm Scope of delivery : - saw band - workpiece stop - underframe - Manometer for belt tension - Vice with quick lock - coolant device - Hydraulic lowering cylinder - Motor protection switch - Automatic limit switch-off

Condition: new, Bernardo TM 16 BLO/ R 1100 Electric thread cutting machine Technical specifications Tapped holes* M3 - M16 Speed max. 120 - 325 rpm Adjustable angle 0° - 90 Max. Working radius R 1100 mm Quick change chuck DIN 371: M3 / M4 / M5-6 / M8 / M10 DIN 376: M12 / M14 / M16 Motor power 600 W Voltage 230 V weight approx. 26 kg * Material strength 400 N / mm2 Scope of delivery Operation via touch screen Digital drilling depth display Micro spray system Psdpepag Npsfx Abaorc Blow-out device Quick change chuck Quick change chuck according to DIN Electric motor 90° angle adjustment Mounting flange Features Standard with micro-spray system for constant cooling and minimal cooling lubricant consumption Including blow-out device for removal of chips, thus optimal view of the drill hole Including quick-change chuck for the use of taps for through and blind holes Swiveling motor unit for tapping at any desired angle between 0° and 90 Higher accuracy compared to manual tapping, thread is guaranteed right angle (90°) High productivity, significant time savings compared to manual thread cutting Quick-change chuck with integrated slip clutch prevents tap breakage Including swivel arm with large radius for easy positioning of the tap on the workpiece For tapping in steel, stainless steel, aluminum and non-ferrous metals Price: Base 900 x 600 mm with 2 drawers for TM series 830,00

Condition: new, square edge steel 20x20 / 25x25 mm flat steel 100 x 7.0 mm round bar steel 22.0 / 27.0 mm L-beam 100 x 10 mm weight of the machine ca. 33.0 kg. range L-W-H 900 x 430 x 310 mm Features - For precise cold and hot bending of flat, round and square steels - Sturdy design for bolting to the workbench - Infinitely adjustable bending stop - With eccentric quick clamping for efficient working - Readable bending angle up to 120 - High repeat accuracy thanks to bending angle stop - Ideal for repair workshops and locksmiths - - - - - Bending performance "cold" : Flat steel 100 x 7 mm 65 x 12 mm Round steel 22.0 mm Square steel 20 x 20 mm Angle steel 100 x 10 mm - - - - - Bending capacity "hot" : Flat steel 100 x 15 mm 75 x 20 mm Round steel 27.0 mm Square steel 25 x 25 mm Angle steel 100 x 15 mm - - - - - Scope of delivery Podpfx Abjxcuyhoaorc - Bending plate - Angle stop stepless - Clamping block with eccentric clamp - Material stop

Condition: new, turning length 1000 mm turning diameter 360 mm swing diameter over bed slide 220 mm turning dia. in gap 502 mm spindle bore 52,0 mm turning speeds 70 - 2.000 U/min bed width 185 mm spindle taper 55029 D 1-5 taper in tailstock 3 MK quill travel 100 mm total power requirement 1,5 / 2,2 kW weight of the machine ca. 575 kg. range L-W-H 1825 x 750 x 1600 mm Scope of delivery - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 70 mm - Follow-on steady rest - passage diameter max. 60 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disc 280 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - Base frame with drawers Pedpfx Aoxaaz Esbasrc - Operating tools

Condition: new, Bernardo belt grinder MS 75 x 2000 DC-2 / 400 V Technical specifications belt dimensions 75 x 2000 mm Belt speed 18 / 36 m/sec. contact wheel Ø x W 200 / 75 mm surface grinding table 500 x 75 mm suction connection Ø 2x 100 mm Suction capacity 520 m3/h speed suction 2780 rpm Motor power extraction 0,37 kW Motor output power S1 100% 2,5 / 3,3 kW Motor input power S6 40% 3,3 / 4,3 kW Voltage 400 V length 1130 mm Width 520 mm Height 1130 mm Prsdpfx Abepag Tdsaec Weight approx. 104 kg Scope of delivery - Sanding belt K 80 - Hinged protective disk - Integrated suction - 2x aluminum suction hose diam. 100 mm - filter bag - Grinding and support table - Workpiece stop - Motor protection switch - Rubberized grinding roller - Graphite coating - Separate emergency stop button - Base frame

Condition: new, bore capacity in steel (diameter) 32,0 mm throat 230 mm bore stroke 120 mm Predpfx Abew U U N Ieasc morse taper 3 MK table: 400x320 mm turning speeds 105 - 1725 U/min total power requirement 1,2 kW weight 245 kg range L-W-H 470x810x1710 mm Furnishing: - Compact, stable cast iron construction in a modern design - Infinitely variable speed control - is changed The speed is read on a digital display - Table height adjustment via rack and crank - Right and left rotation of the quill for thread cutting - Powerful 2-stage motor, speed range from 105 - 1725 rpm - Base plate with T-slots for clamping high workpieces - Safety switch with undervoltage release - The spindle runs in the precision ball bearing scope of delivery - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MK 3/2 - Digital speed display - LED machine light - Height-adjustable protective cover

Condition: new, pressure 30 t stroke 150 mm table surface area 185 mm Breite Psdjxabg Nopfx Abaorc column travel between the guideways 530 mm weight of the machine ca. 162 kg dimensions of the machine ca. 800 x 700 x 1805 mm

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 190 mm, spindle bore: 40 mm, turning diameter: 350 mm, turning length: 1,000 mm, total length: 700 mm, total width: 1,730 mm, total height: 1,340 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 70 rpm, metric thread diameter (max.): 7 mm, metric thread steps: 32, overall weight: 272 kg, three-jaw chuck diameter: 160 mm, The Standard 165 Top precision lathe is distinguished by its robust design and high functionality. Its rich standard equipment, including essential accessories such as a 3-axis digital readout, steadies, LED work lighting, and CE-compliant safety features, makes it an extremely versatile model. Additionally, the machine is supplied with a quick-change tool post system. - The ideal solution for toolmaking companies, vocational training workshops, and repair shops - Bed made of cast iron, ground and induction hardened - Easy and precise speed and feed adjustment with an ergonomically designed control panel - Standard equipment includes a leadscrew and feed shaft for threading and automatic feed - Convenient—single-handed tailstock clamping system, suitable for taper turning - Removable gap bridge enables the machining of larger workpieces - Modern main spindle bearing system - Hardened and ground gearbox and shaft gears - Standard equipment includes: 3-axis digital display, LED lighting, and base - Foot brake significantly reduces downtimes - Motor with magnetic brake according to CE standards - Standard fitted front chip tray - Quick-change toolholder set, Multifix system included in the delivery Pedpfoyr Hnkjx Abajrc Centre distance 1000 mm Centre height 175 mm Swing over bed 350 mm Swing over removable gap 450 mm Swing over cross slide 190 mm Bed width 180 mm Spindle bore 40 mm Spindle nose DIN 55029, D1-4 Spindle speed min. 70 rpm Spindle speed max. 2000 rpm Number of spindle speeds / Infinitely variable 8 Longitudinal feed range (40) 0.053–1.29 mm/rev Cross feed range (40) 0.013–0.31 mm/rev Metric thread pitch (32) 0.4–7 mm Inch thread pitch (36) 4–60 TPI Tailstock quill stroke 110 mm Tailstock taper MT 3 Motor power 2.2 kW Motor power S1 100% 1.5 kW Voltage 400 V Dimensions (W × D × H) 1730 × 700 × 1340 mm Weight approx. 515 kg Scope of delivery: - 3-jaw chuck DK11-160 mm / D4 - 4-jaw independent chuck K72-200 mm / D4 - 3-axis digital readout - Service tools - Fixed steady rest – clearance max. 60 mm - Traveling steady rest – clearance max. 60 mm - Faceplate 250 mm - Friction clutch - Micrometer longitudinal stop - Walking system - Motor with magnetic brake in compliance with CE - Foot brake - Thread dial indicator - LED work light - Reducing sleeve - Change gears - 2 live centers - Stand - Partition - Multifix system (4 tool holders included) - Legally required safety guards - Complete technical documentation in Polish - CE Certificate - 24-month warranty for all users at no extra charge

Condition: new, roll diameter 520 mm throat 520 mm workpiece height 310 mm cutting speed 25 - 500 m/min table surface area 600 x 500 mm band length 3.880 x 3-16 mm mm Table tiltable up to 15° Grad work height max. 1000 mm total power requirement 1,5 kW weight of the machine ca. 500 kg. dimensions of the machine ca. 1,3 x 0,76 x 2,14 m Furnishing: - Solid gray cast iron table - Safe working is guaranteed by the large contact surface - Standard with band welding device, annealing device - Scissors and sharpening stone - As standard with continuously adjustable cutting speed - Machine body made of robust steel construction for smooth running - Precision blade guide for optimal cutting results - Ideal for sawing complicated contours and shapes - Work table can be swiveled by 15 ° in all 4 directions - Blow-out device with compressor included in delivery - For radius sawing saw bands from 3 mm wide available Prjdjxaazxjpfx Abaoc scope of delivery: - saw band - Tape welding device with annealing device - halogen light - Scissors - grindstone - Chip brush - blow-out device - LED digital display - Longitudinal table groove

Condition: new, sheet width 2065 mm Podpfoxabvwjx Abaorc plate thickness 1,20 mm daylight opening mit WZ 35,0 mm daylight opening ohne WZ 60,0 mm bending angle max. 0 - 135 ° total power requirement manuell weight of the machine ca. 520 kg. dimensions of the machine ca. 2400 x 1115 x 1150 mm - Segmented upper beam for a large number of bending options - Universally applicable bending machine for plumbing and repair shops - High upper beam for the production of high-edged profiles - Quick and easy bending process using a bow handle - Easy adjustment of the upper beam for efficient work - The bending angle is set using a scale - Individually removable segments for bending boxes - Robust construction in a modern design Furnishing : - segmented upper beam + bending beam - Foot clamp - Fixed stop for angle adjustment - back gauge - bending segments 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 | 254 mm

Condition: new, tube diameter 1/2 - 2.0 Zoll wall strength 2.75 - 4.5 mm ST pressure 10.0 t weight of the machine ca. 46.0 kg With a hinged bending frame for efficient work Pjdpfx Abjxaac Nsaorc - Various bending dies included - Universally applicable for gas, boiler, and water pipes - Fast work thanks to rapid feed - With a tripod stand for safe work - Also ideal for copper and coated pipes - Bends up to 90° can be created Features: - Bending dies: ½" - ¾" - 1" - 1 ¼" - 1 ½" - 2"

Condition: new, square edge steel 16 x 16 mm flat steel 100 x 5 mm L-beam 60 x 8 mm round bar steel 18.0 mm weight of the machine ca. 33.0 kg Properties : - For precise cold and hot bending of flat, round and square steels - Sturdy design for bolting to the workbench - Infinitely adjustable bending stop with locking pin - With eccentric quick clamping for efficient working - Readable bending angle up to 120 - High repeat accuracy thanks to bending angle stop - Ideal for repair workshops and locksmiths - - - - - - - - - - Cold bending capacity Flat steel 100 x 5 mm 65 x 10 mm Round steel 18.0 mm Square steel 16 x 16 mm Angle steel 60 x 8 mm Bending capacity hot Flat steel 100 x 15 mm 75 x 20 mm Round steel 27.0 mm Square steel 25 x 25 mm Angle steel 100 x 12 mm Pjdpfx Asxcux Rebajrc - - - - - - - - - - Scope of delivery: - Bending plate sharp / round - Radius bending plate R 20 / R 25 - Offset block - Bending plate for round bar - Offset plate - Radius bending plate R 10 / R 15 - Angle stop - Clamping block with eccentric clamp - Material stop

Condition: new, bore capacity in steel (diameter) 50,0 mm arm length 320 - 1.220 mm workpiece height max. 330 - 1.170 mm turning speeds 25 - 2000 U/min spindle taper MT 5 MK base plate 1300 x 980 mm threading 42 M quill stroke 335 mm total power requirement 4,0 kW weight of the machine ca. 3000 kg. range L-W-H 2035 x 1000 x 2830 mm Furnishing: - Large-sized base plate, ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good gliding ability of the drill head on the boom - sanded surface Scope of delivery: - Cube table - Drill chuck arbor MK 5 / B 16 - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - lifting motor - hydraulic motor Podjxaaabspfx Abaerc - operating tool - Height-adjustable protective cover

Condition: new, bore capacity in steel (diameter) 60,0 mm arm length 350 - 1.600 mm workpiece height max. 665 x 1.250 mm turning speeds 38 - 2.000 U/min spindle taper MT 5 MK base plate 960 x 1.760 mm threading 42 M quill stroke 325 mm total power requirement 4,0 kW weight of the machine ca. 3.800 kg. range L-W-H 2.600 x 1.100 x 2.770 mm scope of delivery : - Cube table - Drill chuck arbor MK 5 / B 16 - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light Pedpfx Abexaa H Uoaorc - First filling with Shell Tellus 46 - coolant device - Frequency converter - Digital speed display - lift motor - hydraulic motor - Height-adjustable protective cover - operating tool

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 29.0 m/sek grinding width 460 x 75 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 66.0 kg range L-W-H 1080 x 440 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding Pedpfx Absxabtioasrc - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, power capacity 0,75 kW degree 45° Grad turning speeds 10.000 U/min milling height 4,0 mm motor 400 Volt range L-W-H 560 x 300 x 450 mm weight 44,0 kg Description : - Advantage of the sliding guide rail: Pjdpfxoxab H Ne Abaorc the workpiece is not moved and therefore cannot be scratched - Ideally suited for deburring and chamfering (visible edges) of various - Materials e.g .: steel, aluminum, non-ferrous materials, plastics, etc. - Ideal for producing visible edges with excellent surface quality - High dead weight for vibration-free work scope of delivery - Slidable guide rail 500 mm - milling head - HM indexable inserts - Operating tool

Condition: new, pressure 20,0 t stroke 185 mm table surface area 170 mm Breite column travel between the guideways 510 mm weight of the machine ca. 112 kg dimensions of the machine ca. 1630 x 560 x 730 mm Furnishing: - Standard with pressure cylinder that can be moved to the left and right - For aligning, pressing, bending, assembling gears, discs, etc. - Standard with foot pedal and hydraulic hand pump for piston delivery - Standard with support prism for aligning shafts - With automatic piston retraction by integrated return spring as standard Prodpfjxaapcjx Abaoc - Height-adjustable press table with locking bolts - Large manometer for reading the compressive force - Including two-stage hydraulic pump - Robust construction with welded steel frame

Condition: new, Bernardo Universal Lathe Titan 660 x 2000 Technical Specifications Distance between centers: 2000 mm Center height: 330 mm Swinging diameter over bed: 660 mm Swinging diameter over cross slide: 900 mm Swinging diameter over compound slide: 460 mm Bed width: 400 mm Spindle bore: 105 mm Spindle mounting: DIN 55029, D1-8 Speed range (16): 25 – 1600 rpm Range of longitudinal feeds (25): 0.044 – 1.48 mm/rev Range of cross feeds (25): 0.022 – 0.740 mm/rev Metric threads (54): 0.45 – 120 mm Inch threads (54): 7/16 – 80 TPI Tailstock diameter: 90 mm Tailstock travel: 235 mm Tailstock arbor: MK 5 Motor power: 7.5 kW (10.0 HP) Machine dimensions (W x D x H): 3630 x 1200 x 1520 mm Weight approx.: 2900 kg Features Versatile applications in general mechanical engineering, production, and individual part manufacturing… Central, easy-to-use control for feeds and threads with lead and driving screw Prismatic bed made of cast iron, inductively hardened and precision-ground Modern main spindle bearing with tapered roller bearing in a precision design Hardened and ground gears and shafts, including in the feed drive Standard with rapid traverse in longitudinal and cross directions to reduce idle times Large spindle bore (105 mm) for workpieces with a large diameter Soft start via the mechanical lamellar clutch Electromechanical foot brake to reduce idle times Excellent chip removal performance, even during facing operations The bed is provided with robust ribs to stiffen the bed guidance and minimize the influence of vibrations Scope of supply 3-axis digital display ES-12 V with LCD display Slip clutch Rapid traverse in longitudinal and cross directions LED machine light 3-jaw steel chuck PO3-315 mm / D8 Faceplate 450 mm Fixed steady rest – bore diam. max. 180 mm Prjdpfx Abjfbbx Roajc Traveling steady rest – bore diam. max. 120 mm 2 live centers Motor with magnetic brake according to CE standard Foot pedal with braking function according to CE Initial filling with Shell Tellus 46 Coolant system Quick-change tool holder with 4 inserts Protective device for quick-change tool holder Change gears Reducing sleeve Chip guard Cable routing via energy chain Operating tools

Condition: new, pressure 50.0 t Prodpsxaa Ixsfx Abajc stroke 200 mm table surface area 730 x 205 mm dayligth 75 - 1050 mm column travel between the guideways 730 mm weight of the machine ca. 292 kg range L-W-H 1040 x 800 x 1880 mm Description : - Standard with cable winch - for easy height adjustment of the support table - Piston delivery either manually or pneumatically - Powerful workshop presses for craft and repair businesses - Optimum price-performance ratio thanks to rational design - The standard foot pedal keeps your hands free for the workpiece - Increased range of application thanks to the optionally . available pressure mandrel set (10 pieces). - Pressure cylinder with integrated return spring for piston return - Welded steel frame for heavy use and high stability - Versatile in use thanks to the pressure cylinder that can . be moved to the left and right

Condition: new, functionality: fully functional, Drill-milling machine FM 55 HSV equipped with height adjustment of the milling head via an auxiliary motor and automatic quill feed. The basic configuration already includes all essential accessories (3-axis digital readout, power feed for the milling table, central lubrication, cooling device, LED work light, cast iron base with coolant channel, CE-compliant safety equipment), making this machine suitable for universal applications. Standard equipment includes automatic quill feed and threading mode Rapid X-axis table adjustment thanks to automatic feed with rapid traverse function Cast iron machine base ensures vibration-free operation Enhanced productivity thanks to the standard 3-axis positioning display Two-stage motor with 12 selectable speeds (75 – 3200 rpm) Versatile use – e.g. slot milling, surface milling, boring, etc. Milling head tilts both sides for angled drilling, edge milling, etc. Stability due to dovetail guideways for the gear head Dovetail guideways in the X, Y, and Z axes, adjustable via gib strips Convenient milling head height adjustment by motor Manual central lubrication for all guideways Prsdpfx Asytdy Tjbaec Technical specifications Max. drilling capacity: 32 mm Max. drilling capacity in castings: 40 mm Max. face mill diameter: 80 mm Spindle/column distance max.: 220 mm Spindle/table distance: 95 – 485 mm Quill stroke: 120 mm Automatic quill feed – range: (3) 0.10 / 0.18 / 0.26 mm/rev Min. spindle speed: 75 rpm Max. spindle speed: 3200 rpm Speed change – number of steps / stepless: 12 Spindle taper: MK 4 Table size – width: 800 mm Table size – depth: 240 mm Travel in X-axis: 420 mm Travel in Y-axis: 200 mm Head vertical adjustment: 390 mm Head swivel: -60° to +60° T-slots (number, size, spacing): 14 mm Quill vertical lifting motor power: 90 W Motor power: 1.5 / 2.2 kW Motor power S1 100%: 1.1 / 1.5 kW Voltage: 400 V Dimensions – width: 1270 mm Dimensions – depth: 960 mm Dimensions – height: 2120 mm Weight approx.: 447 kg Scope of supply 3-axis digital readout ES-12V LCD 3–16 mm / B16 quick-action drill chuck Drill chuck arbor MK 4 / B16 Spindle M 16 Reducer sleeve MK 4/3 Combined milling arbor MK 4/27 mm Automatic quill feed Height-adjustable safety guard Milling head lifting motor Central lubrication X-axis table feed AL 450 D LED work lamp Electronic spindle speed indicator Electronic quill stroke indicator Thread-cutting mode Slat safety guard Cooling system Longitudinal scale Cast iron base with coolant system Operator tools

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 14.5 + 29 m/sek grinding width 460 x 75 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 67.0 kg range L-W-H 1080 x 440 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for Predpfx Ajxaarqebaec cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, sheet width 2020 mm plate thickness 2,0 mm daylight opening 124 mm bending angle max. 0 - 135 ° work height max. 930 mm total power requirement von Hand kW weight of the machine ca. 1.010 kg Pjdsxaaanepfx Abaerc dimensions of the machine ca. 2,75 x 0,56 x 1,26 m characteristics - Easy to use swivel bending machine - Flat guide for exact movement of the upper beam - Manually adjustable bending angle using a scale - Robust welded steel construction, designed for heavy use - Large opening width for processing tall workpieces - Optionally with back gauge for series work - Quick and easy bending process using a bow handle - Workpiece clamping by means of a large lever

Condition: new, functionality: fully functional, control type: NC control, degree of automation: semi-automatic, actuation type: mechanical, working width: 1,360 mm, sheet thickness steel (max.): 3 mm, back gauge: 750 mm, control voltage: 400 V, overall weight: 1,240 kg, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, Standard equipment includes a sheet clamping device, making it optimal for thin sheets. Support arms at the front facilitate the handling of large panels. The electrically driven rear gauge ensures precise movement with rolling ball screws. A clearly laid-out control panel with integrated control system. Robust steel sheet construction ensures vibration-free operation. Support table with rectangular stops on both sides. High operator safety due to protective guard and rear-mounted light barriers. Double-edged knives made from high-quality steel guarantee clean and burr-free cuts. The automatically operating hold-down device ensures secure sheet clamping. Technical specifications: Cutting length: 1360 mm Maximum sheet thickness (mild steel): 3 mm Cutting angle: 2° 30‘ Strokes per minute: 31 Predjyt Ia Ropfx Abajc Working height: 810 mm Rear gauge: 0–750 mm Table width: 390 mm Motor power: 3 kW Voltage: 400 V Dimensions (W x D x H): 1930 x 2100 x 1260 mm Weight approx.: 1240 kg

Condition: new, functionality: fully functional, input voltage: 400 V, cutting height (max.): 90 mm, cutting width (max.): 3,200 mm, rotational speed (max.): 6,000 rpm, overall weight: 710 kg, Equipment: CE marking, saw blade guard, Rod guideways – a solution previously found only in top-tier machines, now available as standard Slide table made of aluminum equipped with hardened guideways ensures smooth and precise movement Table extension and widening as standard – ideal for supporting large sheet formats Robust support table enables processing of heavy and large panels without the need for additional support Powerful drive motor guarantees maximum cutting performance, even during intensive continuous operation Easy angle reading set directly on the handwheel – comfort and precision in adjustment Scoring unit with independent motor included as standard Extendable telescopic stop (up to 3100 mm), mountable at the front or rear of the support table – flexibility and convenient handling Stable saw unit ensures precise, clean cuts without vibration Machine body with reinforced, stable design made of steel and grey cast iron combination – ensures durability, rigidity, and precise operation even under heavy load. Parallel fence with a robust, round 40 mm guideway – the tilting option makes material loading easier Workspace – minimum required floor area is 5 × 6 m Technical specifications Table size – length: 935 mm Table size – width: 620 mm Sliding table length – panel/roller: 3200 mm Sliding table width – panel/roller: 370 mm Sliding table, carriage type: Panel Edge trimming length / table movement: 3200 mm Blade size: 315 x 30 mm Max. cutting height 90°: 90 mm Max. cutting height 45°: 65 mm Cutting width with guide: 1295 mm Working height: 850 mm Table extension: 600 x 615 mm Table widening: 900 x 600 mm Extension table: 1210 x 860 mm Pedpfx Asyt I Arebaorc Main saw rotation speed: 4000 / 6000 rpm Scoring saw rotation speed: 8000 rpm Scoring saw size: 120 x 20 mm Extraction port Ø: 100 mm Motor power: 5.5 kW Motor power S1 100%: 4 kW Scoring unit motor power: 0.75 kW Voltage: 400 V Dimensions – width: 3445 mm Dimensions – depth: 3560 mm Dimensions – height: 1570 mm Weight approx.: 710 kg

Condition: new, Bernardo BF 45 HSV Drilling and Milling Machine Technical Specifications Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Milling cutter arbor max.: 80 mm Overhang: 280 mm Spindle speed: (12) 75 – 3200 rpm Podpfxegd H Uxj Abaorc Spindle taper: MK 4 Quill stroke: 120 mm Quill feed: (3) 0.10 / 0.18 / 0.26 mm/rev Table size: 730 x 210 mm T-slot size: 14 mm Distance spindle / table max.: 640 mm Distance spindle / base plate max.: 1190 mm Travel (x / y): 495 / 200 mm Milling head swivel: -90° to +90° Height adjustment milling head: 260 mm Column diameter: 115 mm Working area base plate: 365 x 375 mm Motor output S1 100%: 1.1 / 1.5 kW (400 V) Motor input S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H): 1070 x 800 x 2060 mm Weight approx.: 362 kg Scope of supply • Quick-change drill chuck 3 – 16 mm / B 16 • Drill chuck arbor MK 4 / B 16 • Draw spindle M 16 • Reducing sleeve MK 4 / 3 • Combination milling arbor MK 4 / 27 mm • Automatic quill feed • Height-adjustable protective shield • Digital quill stroke indicator • Thread cutting device • Coolant system • LED machine light • Longitudinal measuring scale • Operating tool