Used Ciata E-160 Tig Pulse for sale (72,461)

Condition: used, Year of construction: 1991, Technical details: Pressure: 160 t stroke: 500 mm throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250 x 630 x 100 mm passage opening in table: 4x D=62 mm ram speed - forward: 200 m/s ram speed - reverse: 125 m/s ram surface area: 450 x 850 mm mortise hole in ram: 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter * Gsdpfx Asw D Awmondoui

Condition: used, Year of construction: 1980, Technical details: Pressure: 160 t stroke: 20-160 mm throat: 400 mm ram adjustment: 120 mm no. of strokes: 71 Hub/min daylight dimension : table/slide up: 720 (bei Hub 160mm) mm daylight dimension : table/slide low: 560 (bei Hub 160mm) mm ram surface area: 900 x 660 mm distance between columns: 500 x 450 mm table surface area: LxBxØ: 1200 x 750 x 100 mm total power requirement: ca. 23.0 kW weight of the machine ca.: ca. 15,0 t dimension machine xH: 2,7 x 1,5 x 3,45 m Gjdpsu N A U Isfx Andeui dimensions electric cabinet LxWxH: 2,0 x 0,65 x 2,15 m Operation via control panel/operator stand/foot control and hand-held control unit The press can be offered with two options. 1st option: Sold as is, not connected, not complete, not functional. 2nd option: The baler will be refurbished, all parts will be exchanged, replaced and puddled. The press will be set up again. For inquiries about this press, please select your offer option! in progress. *

Condition: used, Year of construction: 2011, A well-preserved EMAG laser welding machine with EMAG ultrasonic testing system including Laser Rofin type: DC 060 built in 2009 Without exhaust unit Gujdpfsixxqkex Andoi The machine used to weld gears with coupling rings. Diameter 60-80 mm. Weld depth 4-6 mm. *

Condition: used, Technical details: Guodpfxou Nwaxo Andji welding current - continuous: 320 A protection class: IP21 total power requirement: 17 kVA kVA weight of the machine approx.: 132 kg dimensions of machine: 1,3 x 0,6 x 0,9 m TIG with 2-stroke; 4-stroke; spot welding and pulse welding Switching from 2-stroke to 4-stroke Cooling mode AF New components like: -hose package 4.0 meter, water cooled -mass tongs and mass cable 4.0 meters -pressure reducer *

Condition: refurbished (used), Diosna SPV 160 AD - 2 kneading bowls included Guodpfx Ans Aibmaedji - 2 speeds, 2 timers - traditional timers - 160 kg dough capacity - after a complete overhaul - I can provide a tipping device for the machine upon request.

Condition: like new (used), Year of construction: 2024, Used double-sided cantilever racking: hot-dip galvanized bolted system Scope of supply: 4 double-sided racking uprights, height 4,160 mm with base section 1,200 mm 24 cantilever arms with 1,200 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Per upright, 6 screwable cantilever arms and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels on top of each other per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length 4,000 mm - Including fastening material (without floor anchors) Gusdpfxsh Ek Das Andei - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The subsoil must be made of concrete, level and suitable for dowels, and must be able to absorb the acting loads. The customer must check and ensure the ground conditions, load-bearing capacity, and any required official permits. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: new, Elster SM-RI-X-E G1600 turbine gas meter, volume meter, gas meter Guedpsd I Tz Tefx Andei Elster turbine gas meter SM-RI-X-E-G1600-200-98.5-K (170) Qmax: 2500 m³/h Qmin: 130 m³/h pmax: 89.5 bar No.: 10520813-2014 Pulse generator HF2, 162.370 pulses/m³ Manufacturer's price: €21,540.00 net You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: new, For sale: a NEW, unused KSB ETABLOC-G 40-160/552.2 centrifugal pump with a 5.5 kW electric motor. The pump comes from warehouse stock. It is new and unused. The set includes the original KSB carton and operating manual. Pump technical data: Manufacturer: KSB Model: ETABLOC-G 40-160/552.2 Ident-No.: 48862664 Flow rate Q: 7.5–63 m³/h Head H: 35.8–24 m Pump speed: 2900 rpm Guodpez Sn Aajfx Andei Design: G11 Motor: Power: 5.5 kW Power supply: 3-phase Frequency: 50 Hz Voltage: 380–420 / 660–725 V Speed: 2880 rpm Protection class: IP55 Insulation class: F Condition: NEW / UNUSED – warehouse stock. The pump is in its original KSB packaging. The operating manual is included. The item for sale is exactly the one shown in the pictures.

Condition: new, Year of construction: 2024, New dust extractor Year of manufacture: 2024 Technical specifications: Certified according to BGHM H3* / CE / GS Power consumption: 2.2 kW Current draw IE2: 4.4 A Filter area: 9.5 m² Dimensions: 1575 x 910 x 2110 mm Dust bin volume: 1 x 160 l Weight: 405 kg Suction nozzle: 160 mm, right Operating air volume: 2300 m³/h Volumetric flow max/nom.: 1780/1447 Vacuum at nominal air flow: 2450 Pa Vacuum before fan at VNenn: 3160 Pa Guedpfx Ansy R E Uusdsi Maximum sound pressure level: 74 dB(A) Filter regeneration: pneumatic, max. 7.5 bar Operating mode: continuous operation Compressed air connection required Availability: short notice Location: Hochheim

Condition: used, WIG welding machine, electric welding unit DALEX Type TGKW 55 (AC-DC) Serial No. 532521, Year of manufacture approx. 1975 Power: 225 Amps = 60% duty cycle 125 Amps = 100% duty cycle Setting range: 2.8 to 225 Amps Type of current: Direct current and alternating current (AC-DC) Mains connection: 380 Volts, 50 Hz - Power setting via 5 coarse stages and fine adjustment via rotary potentiometer, continuously adjustable - 2-cycle and 4-cycle welding system - Remote control with rotary potentiometer for fine adjustment - Digital display for amperage Godpjdzqacsfx Andjui - WIG hose package, 4 meters - Welding gas pressure regulator - Water-cooled Space requirement L x W x H: 1050 x 610 x 890 mm Weight: 290 kg Good condition

Condition: used, pressure 160 t stroke 8 ... 160 mm no. of strokes (im Leerlauf) 42 Hub/min mould space 560 mm Gedpfx Anj Agciijdjui ram adjustment 125 mm weight of the machine ca. 13,9 t

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized Gjdpfemhhf Sjx Andsui - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) Gusdpfx Ajmhh Dtjndei - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), Year of construction: 2004, T-Die Serial No.: L 1081-041391 // Calender Serial No.: F 1201-041392 Haul-Off Serial No.: F 1201-041392-T Max. winder speed: 50 m/min Type: Film system 1080 mm usable width Equipment / Additional information: Max. gross output PP up to 1000kg/h with film width up to 1200mm A special feature is the winding system, which can cut narrow films (150 mm - 100 mm) Gjdpsw Tbr Hofx Andsui or for example 8 x 175 mm or even 2 x 700 mm one nozzle lip with a max. film thickness of 2mm up to 1000kg/h. Total power consumption: 211 kW/h Main engine power: 250 kW Min. 068 mm film thickness in PS / min. 0.75 mm in PP Maximum calender speed: Max. 50 m/min. mechanically possible Consists of: -Dosing system 5-chamber Maguire -Extruder (160 mm screw) Amut EA 160 // Age: 2003 -Screen changer (for cleaning in food production) -Melt pump -Slot die (1 insert) 120 cm -Lip with max. film thickness up to 2mm up to 1000kg/h -Calender 140 cm -Thickness gauge SBI TMD-EC/140.20.200.R -Post-cooling rollers (4 pcs.) -Winder (Film jam during roll jam) -Cutting machine & film tensioner -Film winders (3 pcs.) -Mill MAZZA CBS 25 40 2T18 // Age 2003 Fully existing infrastructure; control cabinets, pumps, etc.

Condition: ready for operation (used), functionality: fully functional, NC machine vice / HOMGE HPAQ - 160 MULTIPOWER -CLAMPING RANGE / 750mm -Jaw width 160mm -Overall height 220mm -Overall length 1100mm -Total weight approx. 120 KG Guodpfx Ajz Hzatsndoi Errors and omissions excepted.

Condition: new, Year of construction: 2023, functionality: fully functional, Atling steady rest Gedpjxvibmefx Andjui Type: AX4E NAOS 12 160 Cylinder diameter: 80 mm Max pressure: 70 bar

Year of construction: 2006, condition: good (used), CNC control Sinumerik 810D Guodpfx Ajlfdazjndoi 12-fold revolver bar loading device Breuning Irco Simag 42.1R (max. bar diameter 42mm) chip conveyor tail stock Technische Daten / technical details: Umlaufdurchmesser über Bett / rotary diameter over bed 550 mm max. Drehdurchmesser / max. turning diameter 300 mm max. Drehlänge / max. turning lenght 300 mm X-Weg / X-travel 170 mm Z-Weg / Z-travel 335 mm max. Stangendurchlass / max. bar diameter 45 mm Drehzahl / spindle speed 6000 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes Eilgang X / rapid feed X 36 m/min Eilgang Z / rapid feed Z 36 m/min. Antriebsleistung / drive capacity 20 kW Gewicht der Maschine ca. / weight ca. 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: new, functionality: fully functional, feed length X-axis: 1,200 mm, feed length Y-axis: 700 mm, feed length Z-axis: 500 mm, table length: 1,600 mm, table width: 500 mm, Fully operational, heavy-duty FU series milling machines equipped with infinitely variable feed speed control on all 3 axes, including rapid traverse mode, and a 3-axis digital display. The FU line features a multi-universal milling head with 360-degree rotation. Electrical components supplied by the renowned Schneider Electric. ISO 50 spindle taper, table size 1600x500 mm. Equipped with a class-leading SERVO axis feed drive. Key Features: - Infinitely variable feed speed adjustment on all 3 axes, with rapid traverse in all axes - Universal milling head with patented "HURON" system, adjustable at any angle - Swiveling control panel with ergonomically arranged switches - Heavy-duty, solid cast iron construction ensuring vibration-free operation - All guideways are hardened and ground - Precision ball screws on all axes for enhanced machining accuracy - Centralized lubrication system - Automatic table feed for X, Y, Z axes, including rapid feed for all axes - Large, robust T-slotted table designed for maximum loads - 3-axis digital display ensures maximum work efficiency - Safety guards complying with the latest CE standards - Quiet operation due to ground and hardened gears in the oil-bath gearbox - State-of-the-art axis feed technology - High performance maintained even under heavy load - Precision and dynamics on par with modern CNC machines - Greatly reduced backlash for exceptional accuracy - Integral actuator characteristics, delivering a theoretically zero static error - Thanks to feedback, the servo drive can detect overload or positional errors. Upon such detection, the controller immediately halts all machine axes. Technical Specifications: - Table size (width): 1600 mm Gsdpfeytffqex Andjui - Table size (depth): 500 mm - Spindle taper: ISO 50 - Spindle speed range: 30 – 2050 rpm - Number of spindle speeds / Infinitely variable: 27 - Travel X-axis: 1200 mm - Travel Y-axis: 700 mm - Travel Z-axis: 500 mm - Spindle to table distance: 50 – 550 mm - Spindle to column min.: 28 mm - Spindle to column max.: 728 mm - Max. table load: 1800 kg - Automatic feed X-axis: 10 – 1000 mm/min - Automatic feed Y-axis: 10 – 1000 mm/min - Automatic feed Z-axis: 5 – 500 mm/min - Rapid traverse X, Y, Z: 2200 / 2200 / 1100 mm/min - T-slots (quantity, size, spacing): 5 / 18 / 80 mm - Motor power: 7.5 kW - Dimensions (width): 2200 mm - Dimensions (depth): 2285 mm - Dimensions (height): 2100 mm - Weight approx.: 4500 kg Scope of Delivery: - LED work lighting - Cooling system - Centralized lubrication - Table feed for X, Y, Z axes - Coolant tray - 3-axis digital display - Adjustable guards with modern safety features - Service tools - Servo drive - Legally required safety guards - Complete DTR technical documentation (Polish) - CE certificate - 24-month comprehensive warranty at no additional cost

Condition: used, Year of construction: 2002, Unloading system Polar TR 160-ER-6 Description Gujdpfsxy Rn Aex Andji - On the right side of the guillotine

Condition: used, pressure 160 t throat 360 mm stroke 500 mm table surface area 1250x630 mm ram surface 1000x450 mm table height 1000 mm Gusdpfx Ajlp U Hgjndsi dayligth 800 mm weight of the machine ca. 8 t

Condition: excellent (used), Year of construction: 2010, Model: Wittmann Tempro TP+D-S-2:160 Type: Dual-zone pressurized water temperature control unit Max temperature: 160 °C Heating power: approx. 9 kW per zone (up to 12–16 kW optional) Pump: Magnetically coupled, 40–60 l/min, up to 4.5–6 bar Medium: Water (pressurized system) Cooling: Plate heat exchanger, cooling water G 3/8″ Mould connections: G 3/4″ Voltage: 3 × 400 V / 50 Hz Control accuracy: ±0.2 °C Zones: 2 independent circuits Features: Automatic filling, pressure monitoring, leak-free pump, mold Guedpfxozw Drve Andei purging, SSR heater control Options included: SO-C safety package + S-PLUS D 160 performance upgrade Dimensions: approx. 880 × 550 × 1000 mm Weight: approx. 95–120 kg

Condition: used, power: 74 kW (100.61 HP), fuel type: diesel, color: white, first registration: 04/2017, Model year: 2017 Operating hours: 3,233 Number of cylinders: 4 Unladen weight: 10,200 kg CE marking: yes TEREX TL 160 WHEEL LOADER HIGH-DUMP BUCKET, BRAND RUHLE, GERMANY CENTRAL LUBRICATION SYSTEM SOLID TIRES, 80% TREAD TIRE SIZE 7.5 R 25 Gusdpfx Aoyymtwsndei ADDITIONAL HYDRAULIC FUNCTIONS ON THE LOADING ARM HOLMS HYDRAULIC BROOM WITH WATER TANK OPERATING HOURS: 3233 MACHINE IN EXCELLENT CONDITION

Condition: used, mileage: 965,000 km, first registration: 01/2014, tire size: 305/70 R19.5, axle configuration: 4x2, brakes: engine braking, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, Equipment: ABS, cruise control, electric window regulation, parking heater, power mirror, spoiler, tail-lift, = Additional options and accessories = - CD player - Roof spoiler - Spare key - Speed limiter - Aluminum fuel tank - Rearview camera - Headlights - Standard air conditioning - AC power - Tool kit Gusdpfx Aezxl Ihendji = Additional information = Year of manufacture: 2014 Tire size: 305/70 R19.5 Brakes: Disc brakes Front axle: Steerable; tire tread depth left: 9 mm; tire tread depth right: 7 mm; suspension: leaf spring suspension Rear axle: Dual tires; tire tread depth left (inside): 3 mm; tire tread depth left (outside): 2 mm; tire tread depth right (inside): 5 mm; tire tread depth right (outside): 10 mm; suspension: air suspension Unladen weight: 8,155 kg Payload: 7,845 kg GVWR: 16,000 kg Damage: none

Condition: used, WIG welding machine, electric welding unit KESTRA, type WIG 350 AC/DC Electric welding machine Manufacturer's No. / Year of manufacture approx. 1985 Power output 350 Amps = 60% duty cycle Setting range: 3 stages and fine adjustment Welding current: AC / DC Mains connection: 400 Volts, 50 Hz, 32 Amp plug - 4 meter hose pack with WIG torch - 2-cycle / 4-cycle welding unit - Water-cooled Gedpsdzql Sefx Andsui - Gas pressure regulator Space requirement L x W x H: 1050 x 560 x 900 mm Weight: 250 kg The welding test yields good results when welding stainless steel with direct current and good results when welding aluminum with alternating current. The HF ignition does not function; the arc can be ignited by briefly making contact.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 9,782 h, load capacity: 1,600 kg, lifting height: 8,500 mm, free lift: 2,960 mm, fuel type: electric, mast type: triplex, construction height: 3,530 mm, battery capacity: 620 Ah, battery voltage: 48 V, fork length: 1,150 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 3,808 kg, total height: 3,530 mm, total length: 1,800 mm, total width: 1,270 mm, fuel: electricity, Equipment: sideshift, BT RRE 160 – Reach trucks Gujdez Aqdvjpfx Andsi TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 8.500 mm Closed height: 3.530 mm Free lift: 2.960 mm Mast: Triplex (3F850) Fork length: 1.150 mm Fork carriage: 2a Drive: Elektro 48V Battery: 48 V 620 Ah Charger: Dreiphasig 48 V 85 A not tested Tyres: Polyurethan V Service weight: 3.808 kg Length: 1.800 mm Width: 1.270 mm Year of manufacture: 2011 Operating hours: 9.782 h Condition: working condition EQUIPMENT 4th valve, Pulse control ATTACHMENTS Sideshift Internal no.: 1309212 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.