Used Ciata E-230 Tig Pulse for sale (16,260)

Condition: refurbished (used), functionality: fully functional, ground cable length: 3,000 mm, warranty duration: 3 months, hose package length: 8,000 mm, welding current at 60% duty cycle: 205 A, welding current at 100% duty cycle: 170 A, protection type (IP code): IP23, welding current (min.): 3 A, welding current (max.): 230 A, For sale: EWM Tetrix 230 DC Comfort 5P 3-230 AMP 230 Volt 2/4 Step Pulse Gas-cooled Pre gas Post gas Up slope Down slope Start current End current Stick option Steel and Stainless Steel weldable Refurbished, tested, and serviced. Including 8 Meter TIG torch, earth work cable, gas cable, 3 months warranty. Cajdpfow N Iuyjx Adusa Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, warranty duration: 3 months, type of cooling: air, welding current (min.): 5 A, welding current (max.): 200 A, For sale: Cjays Tig 200 DC Pulse 5-200 AMP 230 Volt Gas-cooled 2/4 Step Pulse Pre gas Post gas Up slope Down slope Start current End current Elektrode option Steel + Stainless Steel weldable test welding possible Including 4 Meter SR17 welding torch, earht work lead, gas cable, and 3 months warranty. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. Caodpfx Adjx Afz Njuea The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: new, welding current 10 - 200 A connected load frequency 230 V weight 8,6 kg Dimensions (LxWxH) 380 x 120 x 250 mm TIG Welder Cedjxq Hhgepfx Adueaa AC/DC, Pulse Demo unit in aluminum box Includes all accessories See images

Condition: good (used), Year of construction: 2009, TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Merkle, TIG welding machine water-cooled, with transport trolley -Type: TIG 240 DC Caodpfsqw D Eiox Aduja -Welding power: max. 240 A -Cooling: Merkle WK 230 water circulation cooler -Accessories: incl. ground cable, hose package see photos -Dimensions: 970/560/H1085 mm -Total weight: 99 kg

Year of construction: 2003, condition: used, machine/vehicle number: 06H 127; Lg-Nr. 06565, Technical data: - water-cooled DC-AC equipment TIG TR 4, - water-cooled MIG-MAG equipment DV - IV - XT - E. Welding machine STH 400 - for welding of: Stainless steel , steel , aluminium , etc. - 16-fold welding program preselectable with: - - Preset: E-welding , TIG - welding AC / DC, MIG-MAG welding - Digital Volt + Ampere display - Welding current infinitely variable from 10 A / 15 V to 400 A / 34 A - max. welding current max. 400 A 60% ED - 315 A 100% ED - Power consumption 400 V / 43 A / 16 kVA - pulse device - Welding current increase and decrease adjustment - Backfire adjustment - Gas pre - post current adjustment - water-cooled WIG - hose package 8 running meters, light version - E.- welding cable + earth cable - water cooled MIG - MAG hose package - Separate wire feeder case DV - IV - XT for MIG - MAG welding - 4 rolls - wire feeder - Intermediate welding set - wire feed case 4500 mm - pressure reducer - E. - welding cable + earth cable - Space requirement approx. W 550 x H 1650 x D 1100 mm - Weight approx. 350 kg Codpfx Ascinmbjdusaa

Condition: used, L-TEC Inverter TIG Welding Machine Type Inverter TIG 200 DC TIG welding machine for direct current (DC) Serial No. 184548 Year of manufacture: approx. 1994 Output: 200 amps = 60% duty cycle 155 amps = 100% duty cycle Adjustment range: infinitely variable Current type: DC (direct current) Mains connection: 400 Volt, 50 Hz, 32 Amp plug - 4-meter hose package with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure regulator - DC only Caedsdzqb Eopfx Aduea - HF ignition Space required (L x W x H): 850 x 480 x 740 mm Weight: approx. 150 kg The welding test shows very good results when welding stainless steel with direct current. Overall in good condition.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, overall weight: 8 kg, warranty duration: 3 months, type of cooling: air, hose package length: 4,000 mm, welding current at 60% duty cycle: 155 A, welding current at 100% duty cycle: 120 A, protection type (IP code): IP21, welding current (min.): 10 A, welding current (max.): 200 A, For sale: Cjays Tig 200E ACDC 200 AMP 230 Volt Gas-cooled 2/4 Step Pulse ACDC Pre gas Post gas Up slope Down slope Start current End current Elektrode option Steel, Stainless steel, and Aluminum weldable Codpfexr Nzfjx Adusaa Test welding possible Including 4 meter SR17 welding torch, earth work lead with clamp, gas cable, and 3 months warranty. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, TIG welding machine, electric welder KESTRA type WIG 350 AC/DC E-welding machine Serial No. Year of manufacture approx. 1985 Output: 350 amps = 60% duty cycle Adjustment range: 3 stages and fine adjustment Current type: AC / DC Power connection: 400 V, 50 Hz, 32 A plug - 4-metre hose package with TIG torch - 2-stroke / 4-stroke welding function - Water-cooled - Gas pressure regulator Dimensions (L x W x H): 1050 x 560 x 900 mm Weight: 250 kg The welding test shows good results when welding stainless steel with DC Casdpfx Aodzql Sjduoa and good results when welding aluminium with AC. The HF ignition does not work, the arc can be started via brief contact.

Condition: used, WIG welding machine, electric welder DALEX type TGKW 55 (AC-DC) Serial No. 532521 Year of manufacture approx. 1975 Output 225 amps = 60 % duty cycle 125 amps = 100 % duty cycle Adjustment range 2.8 to 225 amps Current type: DC and AC (AC-DC) Mains connection 380 Volt, 50 Hz - Power adjustment in 5 coarse stages and stepless fine adjustment via potentiometer - 2-stroke and 4-stroke welding function - Remote control with potentiometer for fine adjustment Csdsdzqacspfx Adujaa - Digital ampere display - 4-meter WIG torch package - Welding gas pressure-reducing valve - Water-cooled Dimensions (L x W x H): 1050 x 610 x 890 mm Weight: 290 kg Good condition

Condition: excellent (used), mileage: 243,957 km, power: 338 kW (459.55 HP), fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: retarder, gearing type: automatic, emission class: euro6, loading space width: 2,550 mm, loading space length: 7,500 mm, loading space height: 1,300 mm, Year of construction: 2019, Equipment: retarder, = Further Options and Accessories = - Intarder - Power Take-Off (PTO) = Notes = WMA92SZZ3KM815032 = Further Information = General Information Year of manufacture: Feb. 2019 Driveline AdBlue system: Yes Axle Configuration Front axle 1: Steering Front axle 2: Twin tyres; Steering Rear axle 1: Twin tyres; Brakes: Disc brakes Rear axle 2: Twin tyres; Steering; Brakes: Disc brakes Weights Unladen weight: 16,025 kg Payload: 18,975 kg Gross vehicle weight (GVW): 35,000 kg Functional Mast: Telescopic (5 sections) Mast length: 18 m Lifting capacity: 4,700 kg Crane: Yes Superstructure brand: PALFINGER PK23001EH CE marking: Yes Cedsxxmtropfx Adueaa Condition Technical condition: very good Visual condition: very good Further Information Please contact Sales for more information. = Company Information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours. Prices are excluding VAT. No rights can be derived from the information provided. Office Phone: MOB: Dutch - English - German - French - Spanish - Italian) Available on WhatsApp and Viber. MOB: Dutch) Available on WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account below. Always verify the payment details listed on our website. If you have received different information, please contact us. If you have any doubts, please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Condition: refurbished (used), Year of construction: 2008, operating hours: 4,639 h, load capacity: 3,000 kg, lifting height: 122 mm, load center: 500 mm, fuel type: electric, mast type: simplex, construction height: 1,400 mm, fork length: 1,150 mm, empty load weight: 565 kg, FRIEDMANN FORKLIFTS – RECONDITIONED BY EXPERTS. FOR PROFESSIONAL USE Our forklifts are technically refurbished according to FEM-4.004 and current safety standards – for maximum quality and your safety. From chassis to battery, including drive system, brakes, steering, and electrics – every machine undergoes thorough inspection and reconditioning. Caedpsw D T Enofx Aduja ✔ Made in Germany – with responsibility and precision ✔ Rigorous technical inspection ✔ 400+ units available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after purchase Test and get expert advice on site – we’ll find the right solution for you. Industrial Truck Specifications: Manufacturer: Jungheinrich Model: Low-Lift Pallet Truck EJE 230 Drive type: Electric Load capacity: 3,000 kg Year of manufacture: 2008 Operating hours: 4,639 Lift height: 122 mm Mast type: None Initial lift: Yes Overall height: 1,400 mm Fork length: 1,150 mm Unladen weight: 565 kg Load center: 500 mm Tyres: Polyurethane Model designation: EJE 230 Battery type: PzS

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: OCTME230 - 2200388958, type of input current: three-phase, cooling capacity: 66.2 kW (90.01 HP), overall weight: 383 kg, input voltage: 400 V, volume flow: 11.4 m³/h, warranty duration: 12 months, type of cooling: water, temperature: 7 °C, total height: 1,200 mm, total length: 1,735 mm, total width: 660 mm, pressure: 10 bar, Equipment: type plate available, Split-Type Chiller, Water-Cooled Chiller Unit Manufacturer: MTA S.p.A. Model: OCEAN Tech OCTME 230 – 66 kW The OCEAN Tech OCTME 230 is a water-cooled chiller unit for indoor installation in split version (without condenser), supplied without hydraulic kit (pump, buffer tank) but including crankcase heater and phase monitoring. Cooling capacity: 66.2 kW Chilled water temperature (outlet/inlet): 7 / 12°C Flow rate: 11.4 m³/h Caodpfxexxq U Ts Adusa Condensing temperature: 45°C Refrigerant: R 410A Electrical Data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. Power Consumption: 27 kW Max. Current: 45 A Starting Current (circuit): 178 A Protection class: IP22 Dimensions: Length: 1,735 mm, Width: 660 mm, Height: 1,200 mm Weight: 383 kg Chilled water connection: G 2" B Refrigerant connection Ø (mm): 22 / 28 ODF Serial no.: 2200388958 Year of manufacture: 2022 Condition: Visual 1, Technically OK (storage unit, as new) Price: on request (Technical changes and prior sale reserved!)

Condition: new, Year of construction: 2025, laser power: 6,000 W, working range: 6,000 mm, We, Airtech Stickstoff GmbH, have been partners with Bodor Laser for 8 years. We offer customers cost-effective, up-to-date laser cutting machines that are economically viable. Comprehensive service as well as system setup with our own service team. German-language training is also part of our services. Top quality at top prices. - Operable with or without loading system; here you have two options: fully automatic with bundle storage or a semi-automatic that can transport several rods of long material. - Simple programming. Casdpfx Adefbg E Tjusa - 3 machine types with tube diameters up to 120 mm-350 mm available - Laser power up to 12 kW.

Condition: like new (used), Year of construction: 2023, operating hours: 30 h, functionality: fully functional, machine/vehicle number: 282974, warranty duration: 6 months, Rehm Tiger 230 AC/DC Ultra is a high-end TIG welding power source designed for professional use. Manufactured by the German company Rehm, this unit offers both AC and DC modes, making it ideal for welding steel, stainless steel, and aluminum. The machine is used only 30 hours in excellent working condition, having been regularly maintained and tested. We provide a 6-month warranty. It is ready for immediate deployment in industrial or workshop settings. ⚙️ Technical Specifications* Model: Tiger 230 AC/DC Ultra Welding current range: approx. 5 – 230 A Supply voltage: 3~ 400 V, 50/60 Hz Modes: AC for aluminum/soft metals, DC for steel/stainless steel Processes: TIG Lift-Arc, Pulsed TIG, MMA/Stick (if option included) Duty cycle: e.g., 230 A (eta) 40% (check actual configuration) Control: Digital interface with memory programs and clear display Cooling: Air-cooled / optional water-cooled (depending on version) Weight: approx. 7.9 kg ✅ Key Features Excellent versatility — AC/DC capability for a wide range of materials. Digital controls and memory programming simplify setup and recurrent jobs. High build quality and reliability from Rehm. Ideal for workshops, fabrication, repair work, and production use. Caodpfx Adoxuvb Djuoa Used unit in strong condition — a great cost-efficient choice. 🎯 Applications Aluminum fabrication Stainless steel and steel construction Precision TIG welding in industrial, aerospace, or automotive sectors Repair and maintenance work

Condition: ready for operation (used), Siemens 6SL3210-1NE26-0UL0 SINAMICS Power Module 230 Version: B SN:T-F31912000116, used, normal signs of use, 100% functional, scope of delivery as per photos Cjdexahbgopfx Adusaa

Condition: good (used), Counting scale, scale, digital scale, market scale, shop scale, price calculation scale -Manufacturer: EXA, market scale shop scale -Type: E 10 -Weighing range: max. 10 kg -Display:Price / kg / Tare, double-sided display -Dimensions: 320/310/H120 mm -Own weight: 3 kg Codpsw S T D Eofx Adueaa

Year of construction: 1997, condition: like new (used), Maximum temperature: 1290 °C Interior dimensions: 630 x 530 x 760 mm Electrical connection: 400 V kW Space required: 1200 x 870 x 1810 mm Weight: 470 kg Cedpst Ebpujfx Aduoaa Heating output: 16.5 kW

Year of construction: 2013, condition: good (used), functionality: fully functional, working width: 2,300 mm, Equipment: documentation/manual, GTA, Standard Line, 2300 mm (Low-E) Horizontal glass washer-dryer Codpfx Ajwplgboduoaa Manufacturer: Glastechnik-Anlagenbau, Germany Year of construction: 2013/2014 6 brushes, diameter: 160 mm Working width: 2300 mm Glass thickness: 2 - 19 mm Minimum glass size: 260 x 150 mm Feed speed: 2 - 8 m/min. Electrical connection: 400/230 V, 50 Hz, 35.5 kW In good working condition. Disassembled and ready for transport.

Condition: new, Year of construction: 2025, laser type: fiber laser, laser power: 6,000 W, working range: 6,000 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, We, Airtech Stickstoff GmbH, have been partners with Bodor Laser for 8 years. Casdpfswra Dyjx Aduea We offer customers cost-effective, up-to-date laser cutting machines that are economically viable. Comprehensive service as well as system setup with our own service team. German-language training is also part of our services. Top quality at top prices. - Operable with or without loading system; here you have two options: fully automatic with bundle storage or a semi-automatic that can transport several rods of long material. - Simple programming. - 3 machine types with tube diameters up to 120 mm-350 mm available - Laser power up to 12 kW.

Condition: ready for operation (used), Siemens 6ES5466-3LA11 Analog input E-Stand: 3 SN:K2230524 ,used, normal signs of wear, 100% functional, scope of delivery according to photos Caodpfx Adei I I Ddjuja

Condition: used, Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Manufacturer: Jungheinrich, charger type Timetronic E230 G 24/65 B-ET Cjdpoizk Rtsfx Aduoaa -Input voltage: 230V 50-60Hz -Power: 24V/65A -Number: 1x charger available -Dimensions: 500/490/H7355 mm -Weight: 53 kg

Condition: used, Vise, bench vise, locksmith vise, parallel vise, heavy duty vise -Parallel vice: jaw width 135 x 20 mm with pipe clamping jaws Cedpfx Adeqxd Dzsusaa -Wingspan: 230 mm -Tube clamping jaws: integrated -Dimensions: 470/135/H185 mm -Weight: 16.5 kg

Condition: used, Frequency converter, frequency converter, drive converter, controller, variable speed drive -LTi REENERGY: Controller E230 G360/1,2 BWrg-CFpux -Power: 1.2 A -Input: 230 V AC 4.5 A -Output: 360 V DC 1.2 A -Price: per piece -Number: 3 pieces -Dimensions: 300/150/H110 mm Codpfefgpdgsx Aduoaa -Weight: 3.7 kg/piece

Year of construction: 1999, condition: refurbished (used), functionality: fully functional, We offer here a screw with 160kW engine. Screw as well as the engine were overhauled by the manufacturer and has not been used since. Included in the offer are: Cjdpfx Aeic Rftsduoaa -Screw RO230 from GDW -motor 160kW Siemens 1LA6 316-4AA68-Z 315L

Condition: excellent (used), Year of construction: 2023, functionality: limited functionality, Manufacturer: Breyer Extrusion Item: Die, 3 layer die 2300mm 3-layer flat sheet die, 2,300 mm width (die opening) Deckling device for one die (max. 500 mm) Feed-block / distribution block Year of manufacture: 2023 Original purchase price at the time: €365,500 Total price at the time: €444,200 Key technical data of the die: - Total throughput: approx. 700 kg/h - Designed for HDPE material - Gross discharge width: 2,300 mm, adjustable via deckling - Lip opening: 16 – max. 26 mm - Heating: Electric via heating cartridges 400V / 50Hz - Die heating capacity: 137 kW - Co-extrusion adapter heating capacity: 7.5 kW Comprising: - Die (main die body) 3 channels - Co-extrusion adapter - Die body - Die lip body - Attachments / screws - Attachments for deckling and co-ex adapter parts - Attachments for adjustment mechanisms (Note: Photos are from 2023) The die now shows signs of use and is stored disassembled. The heating elements are included but not installed. The die is located in 78224 Singen (Hohentwiel) at the manufacturer’s premises. An inspection on site is possible by prior appointment. Further photos available on request. You are welcome to submit a price proposal. Reasonable offers will be considered. Please provide complete contact details with your enquiry! Delivery may be available for a fee. You are also welcome to inspect the item on site. Please call to arrange an appointment. A quick tip: Become a “FOLLOWER” of ours here on Kleinanzeigen to stay up to date with our latest listings and offers. This item comes from insolvency proceedings and thus shows signs of use. Maintenance and professional cleaning are the responsibility of the buyer. Sale is without any warranty. Liability, reduction or rescission is expressly excluded. An inspection prior to purchase is recommended, as it is sold as seen. All information is provided without guarantee. Errors and changes excepted. Casdpfxox A D Eme Aduja The item is sold as inspected on site, in used condition, with retention of title, and under exclusion of liability for visible and hidden defects, especially technical quality, performance, or usability issues. Due to time constraints, we will only respond to serious enquiries and price offers! This is an advertisement for informational purposes only. Inspection strictly by appointment only! Best regards, Leipziger Sicherstellungs- und Verwertungs GmbH R. Raum, Tel. 0152 31381635