Used Ciata E-160 Tig Pulse for sale (73,625)

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 1,860 h, load capacity: 1,600 kg, lifting height: 4,800 mm, free lift: 1,600 mm, fuel type: electric, mast type: triplex, construction height: 2,171 mm, fork length: 1,150 mm, empty load weight: 1,400 kg, total length: 800 mm, drive type: Elektro, construction width: 800 mm, High-lift stacker Load centre: 600 Mast type: Triplex Technical condition: standard Front tyre type: Polyurethane Front tyre condition: 40 - 60% Bedpoyfx Ntefx Aaqewh Rear tyre type: Polyurethane Rear tyre condition: 40 - 60% Battery voltage: 24V Battery capacity: 500Ah Battery year: 2018 Description: Machine cleaning, complete replacement of wheels / rollers / bearings, new inspection, fresh black paintwork, new acceptance according to FEM (ex UVV). Pulse control, initial lift,

Condition: used, Year of construction: 2017, filter area: 9.5 m², negative pressure: 2,200 Pa, total height: 2,200 mm, total width: 1,000 mm, total length: 1,800 mm, volume flow: 1,593 m³/h, overall weight: 350 kg, nominal flow rate: 1,447 m³/h, input voltage: 400 V, suction capacity: 1,593 m³/h, space requirement length: 1,800 mm, space requirement width: 1,000 mm, space requirement height: 2,200 mm, power: 2.2 kW (2.99 HP), nominal power: 2.2 kW (2.99 HP), transport width: 1,000 mm, transport length: 1,800 mm, tank capacity: 240 l, transport height: 2,200 mm, No. 04517 Mobile extraction unit / mobile dust extractor Schuko Vacomat 140/160 XPe Unused, year of construction 2017, in new condition Extraction diameter 140 / 160 mm, can be changed using a reducer Residual dust value H3, 0.1 mg/m3 Suitable for extracting combustible dusts The Vacomat 140/160 XPe mobile dust extractor is ideal for single machine extraction. Air volumes of up to 1593 m3/h can be conveyed with this extraction system using the vacuum method, e.g. for dedusting sliding table saws, jointers or thicknessers. The dust/chip mixture is discharged into a dust-tight chip collection container (240 l) with an inserted plastic bag. A vacuum channel holds the plastic bag securely in the collection container. Viewing windows make it easier to check the fill level. The Vacomat 140/160 XPe mobile dust extractor automatically monitors its extraction performance via a pressure cell and guarantees maximum operational safety. In the Vacomat 140/160 XPe, a vibrating motor cleans the filter bags electro-mechanically. No connection to compressed air and therefore no compressor is required. It can be controlled via the query of the woodworking machine using potential-free contacts. The Vacomat 140/160 XPe mobile dust extractor is fitted with patented SchukoCone filter bags as standard. The SchukoCone filter bags are particularly suitable for fine dusts. Nominal volume flow 1447 m3/h Bwjdpfx Aoygbbhoaqoh Vacuum pressure 2200 Pa Motor power 400 V, 2.2 kW Filter area 9.5 m2 Filter material dust class “M” CE-compliant GS-tested Complete technical documentation available Transport dimensions approx. 1800 x 1000 x 2200 mm LWH Weight approx. 350 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: ready for operation (used), Year of construction: 2012, operating hours: 73,437 h, clamping force: 1,600 kN, screw diameter: 45 mm, total height: 2,095 mm, overall weight: 8,700 kg, product length (max.): 5,155 mm, This Engel VICTORY 650/160 tech was manufactured in 2012. It features a tie-bar-less design, enhancing flexibility and accessibility for various mould sizes, with a clamping force of 1600 kN and a screw diameter of 45 mm. It's equipped with a robot, ensuring efficient automation. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 650/160 tech machine we have for sale. Contact us for more information about this machine. • Operating hours: 73,437 h • Condition: Excellent • Status: In production • Maximum injection volume: 318 cm³ • Minimum mould height: 292 mm • Maximum mould height: 900 mm • Platen opening stroke: 609 mm • Platen dimensions: 750 × 750 mm • Tie-bar distance: Tie-bar-less design • Motor power: 22 kW • Heater power: 13.35 kW • Number of electrical connection pins: 16 • Injection nozzle radius (tip): R35 • Centering ring diameter: 125 mm Bwsdex Nr Huepfx Aaqjh • Number of cores: 0 • Number of heating zones: 0 Additional equipment • Equipped with robot: Yes • Robot interface: Euromap 67

Year of construction: 2012, condition: ready for operation (used), screw diameter: 55 mm, This Engel victory 750/160 Spex was manufactured in 2012. It is a hydraulic injection moulding machine featuring core pull, an ejector plate safety device, a 1/2" air valve, and a 10-way water distributor. Consider the opportunity to buy this Engel victory 750/160 Spex hydraulic injection moulding machine. Contact us for more information. • 2 units available • Machine 1: 29,462 hours • Machine 2: 28,713 hours Bjdpfx Aasx D I Egsqswh • Core pull • Ejector plate safety device • Air valve 1/2" Additional equipment • 10-way water distributor

Year of construction: 2010, condition: ready for operation (used), screw diameter: 55 mm, This Engel 750/160 Spex was manufactured in 2010. It is a hydraulic injection moulding machine featuring a 55mm screw diameter, core pull, ejector plate safety device, and a 6-way water distributor. If you are looking to get high-quality moulding capabilities, consider the Engel 750/160 Spex machine we have for sale. Contact us for more information. • Units available: 2 • Machine 1 hours: 35,066 h • Machine 2 hours: 38,769 h • Core pull • Ejector plate safety device • Air valve 1/2" Bwedsx D I Eaopfx Aaqoh • Water distributor: 6-way

Condition: used, Year of construction: 2016, operating hours: 816 h, 2016 | Dücker HM 160 Wood Chipper | Used Shredder | 816 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 14400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 13 inspection points 13 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39536 Equippo" is commonly used when looking up more details online. Bedjydr A Rspfx Aaqjwh 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2006, condition: good (used), CNC control Sinumerik 810D 12-fold revolver bar loading device Breuning Irco Simag 42.1R (max. bar diameter 42mm) chip conveyor tail stock Bodpfx Aaelfdazsqjwh Technische Daten / technical details: Umlaufdurchmesser über Bett / rotary diameter over bed 550 mm max. Drehdurchmesser / max. turning diameter 300 mm max. Drehlänge / max. turning lenght 300 mm X-Weg / X-travel 170 mm Z-Weg / Z-travel 335 mm max. Stangendurchlass / max. bar diameter 45 mm Drehzahl / spindle speed 6000 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes Eilgang X / rapid feed X 36 m/min Eilgang Z / rapid feed Z 36 m/min. Antriebsleistung / drive capacity 20 kW Gewicht der Maschine ca. / weight ca. 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, mileage: 965,000 km, first registration: 01/2014, tire size: 305/70 R19.5, axle configuration: 4x2, brakes: engine braking, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, Year of construction: 2014, Equipment: ABS, central locking, cruise control, electric window regulation, parking heater, power mirror, spoiler, tail-lift, = Additional options and equipment = - CD player - Roof spoiler - Spare key - Speed limiter - Aluminum fuel tank - Rear-view camera - Headlights - Stability control - Standard air conditioning - Alternating current - Toolbox = Further information = Tire size: 305/70 R19.5 Brakes: Disc brakes Front axle: Steerable; Left tire tread: 9 mm; Right tire tread: 7 mm; Suspension: Leaf spring Bwodpfx Aaeygd Udsqeh Rear axle: Twin tires; Left inner tread: 3 mm; Left outer tread: 2 mm; Right inner tread: 5 mm; Right outer tread: 10 mm; Suspension: Air suspension Unladen weight: 8,155 kg Payload: 7,845 kg Gross vehicle weight: 16,000 kg Damages: none

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 120 h, load capacity: 1,600 kg, lifting height: 205 mm, fuel type: electric, fork length: 1,150 mm, empty load weight: 480 kg, total length: 538 mm, drive type: Elektro, construction width: 726 mm, Low-lift pallet truck Load centre: 600 Mast type: None Technical condition: very good Front tyre type: Polyurethane Front tyre condition: 100% Rear tyre type: Polyurethane Rear tyre condition: 100% Battery voltage: 26V Battery capacity: 150Ah Battery year: 2020 Description: Factory-refurbished used unit by Toyota, including new inspection and new certification in accordance with FEM (formerly UVV). Bjdpfx Aaeyauq Ajqewh Pulse control, CE certificate,

Condition: used, pressure 160 t passage width / mm stroke / mm Working height 800 mm total power requirement 15 kW weight of the machine ca. 11,8 t Bodpsiulkqjfx Aaqowh - Table size: 1000x1000mm - Distance table/ram, large stroke above, gain. above: 800mm extra information Removable table

Condition: new, capacity Ø 30 - 160 mm Saw Body 30 Grad Linear Schlitten Bjdpfjud Iw Iex Aaqjwh sawing motor 15 kW hydraulic motor 3 kW Saw Feeding Servo 1,5 KW Siemens Saw speed 30-120 rpm /min saw-blade dia. Ø480 x 2,25 x 2,7 x 50 mm control Siemens hydraulic Rexroth Valve coolant Pulverisiertes Schneidöl weight of the machine ca. 5550 kg required space 3200 x 7600 mm Please use the contact form for price information. GERD WOLFF GLS-160 High-performance circular saw Introducing the new generation of High-Performance Metal Circular Saws, seamlessly blending precision and efficiency with German quality. Our High-Performance Metal Circular Saw machines are setting the standard in metalworking thanks to their innovative technology, allowing for precise and effortless cutting of steel of any kind. From 10 millimeters to an impressive 250 millimeters in steel diameter, our machines cut with utmost accuracy within seconds. At the core of these machines are their automatic functionalities, coupled with an advanced ball screw spindle and an automatic material feeding system. This combination ensures not only maximum precision but also impressive speed. A Siemens motor and Siemens PLC screen guarantee reliable performance and easy control. Moreover, our High-Performance Metal Circular Saw machines feature a special system for quick and convenient blade changes. The hydraulic material tension provides secure fixation of the workpiece during the cutting process. Additionally, a programmable misting system is integrated to ensure optimal lubrication and cooling of the saw blade, extending the tool's lifespan. With our servo and driver technology, you have full control over your manufacturing processes, allowing you to optimize production and achieve the highest quality standards. Choose our High-Performance Metal Circular Saw machines and embrace the future of metalworking – precise, efficient, and reliable. Hochleistungskreissäge, Präzisionssäge, Industriekreissäge, Starkstromsäge, Metallsäge, Präzisionsschneidemaschine, Schwerlastkreissäge, Großsäge, Industrie-Kreissäge, Kreissägeautomat, Metallkreissäge, Leistungssäge, Profi- Kreissäge, Sägeautomat, Grobschneidemaschine, Industrie-Metallsäge, Säge mit großer Leistung, Produktivitätssäge, Große Kreissäge, Schneidemaschine für industrielle Anwendungen, Schnellkreissäge, Industrie-Hochleistungssäge, Industrie-Sägemaschine, Schneidemaschine für schwere Anwendungen, Hochleistungs- Schneidemaschine, Industrie-Maschinensäge, Starkstromkreissäge, Automatische Metallsäge, Industriepräzisionssäge, Großraumsäge, High-Performance Circular Saw, Precision Saw, Industrial Circular Saw, Heavy-Duty Circular Saw, Metal Cutting Saw, Precision Cutting Machine, Heavy-Duty Cutting Saw, Industrial Saw, Power Circular Saw, Metal Circular Saw, Precision Cutting Saw, Professional Circular Saw, Automated Circular Saw, Large Circular Saw, Precision Industrial Saw, Industrial Metal Saw, High-Power Cutting Saw, Productivity Saw, Big Circular Saw, Industrial Cutting Machine, Fast Circular Saw, Heavy-Duty Industrial Saw, Industrial Saw Machine, Heavy-Duty Cutting Machine, High- Performance Cutting Machine, Industrial Machine Saw, Power Circular Saw, Automatic Metal Saw, Industrial Precision Saw, Large Capacity Circular Saw.

Year of construction: 2009, condition: like new (used), functionality: fully functional, with S!MPATI software with vacuum connection Vötsch Drying cabinet VTLF 160/150/110. Max temp 190°C. Dry format 1000x1400 mm. Stainless steel equipment. Filter H13. Funktion Der Reinraum-Trockner für Beschichtungsstoffe vom Typ VTLF ist nach der EN 1539 ausgelegt und konstruiert. Nachdem in den Trockner das Beschickungsgut eingebracht ist und die Türen verschlossen sind, wird das Beschickungsgut im Nutzraum des Trockners von der Umluft turbulent umströmt. Die turbulente Umströmung sorgt für eine gute und räumlich gleichmäßige Wärmeübertragung auf das Beschickungsgut. Bwjdpfev T I I Rox Aaqoh Technische Daten Innenraum (Nutzraum) m3 2,78 Innenmaße Breite Höhe Tiefe mm 1600 1500 1100 Gewicht (netto) kg ca. 1400 Drehzahl der Umluftventilatoren Einstellbereich min. Einstellbereich max. % 50 120 Mindestabluftvolumenstrom (Abluftbetrieb) Reduzierter Abluftvolumenstrom (Umluftbetrieb) m3/h 360 90 Spülzeit 5facher Luftwechsel sek. 300 Gesamtdampfraum m3 4,5

Condition: ready for operation (used), Year of construction: 2023, overall weight: 272 kg, This STAUBLI TX2-160 LHE was manufactured in 2023. A robust robot arm, ideal for precise and efficient automation tasks. Contact us for more information about this machine. Additional equipment • Accessories – for Overpressure Unit • Robot is from research project. Approx. 500 hours Machine Benefits Bjdpfxeyam E Es Aaqswh Technical Machine Benefits • Reach: 2010 mm • Robot controller // robot-controller cables • Cs9 controller • Handheld control device with mount • Documentation on dvd • Connectors and accessories • Mode selector switch with cable • Maintenance unit – for overpressure unit • Kit connect ethernet • Kit connect i/o Extra Information Machine still under power

Condition: used, mileage: 382,865 km, power: 540 kW (734.19 HP), first registration: 04/2013, fuel type: diesel, empty load weight: 11,200 kg, maximum load weight: 14,800 kg, overall weight: 40,000 kg, tire size: 385 / 65 R 22.5/10mm, axle configuration: 6x4, wheelbase: 3,300 mm, next inspection (TÜV): 07/2024, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, total length: 7,500 mm, total width: 25,500 mm, total height: 34,000 mm, front tire size: 385 / 65 R 22.5/10mm, number of seats: 2, operation weight: 26,000 kg, Equipment: air conditioning,

Condition: used, Year of construction: 2006, Kahl Twin Screw Extruder is a machine manufactured by Kahl in 2006. Currently stored in Germany, it comes equipped with a fine grain hopper, fine grain discharge, fine grain sack, a belt unit (Type: BTK 1510-0), water addition, extruder, supply air blower, reconditioned in 2016. It also includes dust removal, tumbler sieve, dedusting, final packaging, belt dryer, product hopper, pipe chain conveyor, cyclone, rotary valve, distributor, dust sack, exhaust air blower, air stream rotation dryer, feed table, mixer, and an additional air supply blower and belt dryer. The delivery terms are FCA. Equipment: 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, Bwodovfxqyjpfx Aaqeh 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 refurbished 2016

Condition: used, Year of construction: 1970, ja Bwedpfx Aovvx Exeaqeh weight of the machine ca. 9,5 t serial number 10457/2 160000 KG stroke of worktool slide 41 Hub/min +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, Eccentric Press - Single Column Manufacturer: ZTS Kosice Model: LEK 160 Year of manufacture: 1991 Capacity: 1600 kN = 160 tons Throat depth (vertical distance from ram axis to the front face of the frame in the working area): 355 mm Shut height (distance between table and ram surfaces in bottom dead center): 455 mm Adjustable stroke: 25 - 160 mm Working stroke: 5.3 mm Ram adjustment: 100 mm Max. strokes per minute: 50 SPM Usable strokes per minute: 32 SPM Table clamping surface: 1000 x 740 mm Bjdpfx Aasygh Ihjqowh Table plate size: 980 x 710 mm Ram size: 710 x 425 mm Table plate thickness: 100 mm Table opening: D 290 x H 8 mm Ram clamping opening: d 50 HB x 85 mm Motor power: 11 kW Voltage: 380 / 220 V Frequency: 50 Hz Working air pressure: 0.6 Pa Overall dimensions (L x W x H): 1380 x 2400 x 3350 mm Weight: 13,000 kg

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, Manufacturer: KOSICE Model: LE 160 C Year of manufacture: 1990 Machine No.: 2291458 Condition: Good / operational Table clamping surface: 1000 x 720 mm Weight: approx. 10,800 kg Width (including control cabinet): 1,500 mm Throat depth: 355 mm Pressing force: 160 tons Stroke rate: 50 / min continuous operation Stroke rate: 30 / min single operation Motor power: 11 kW Ram adjustment: 0 – 100 mm Stroke adjustment: 20 – 120 mm Ram clamping surface: 750 x 380 mm Max. distance ram – table: 450 mm Pass-through hole in table: 480 x 300 mm Air clutch: 6 bar External dimensions: Bedsyghx Topfx Aaqjwh Depth: 2,360 mm Height: 2,850 mm Including: Press safety control Starkstrom Gummersbach Electric auxiliary brake Desch Additional table plate: 900 x 580 mm Two-hand control panel Foot switch Central lubrication Intermediate table Latest safety inspection (UVV): 2024

Condition: used, functionality: fully functional, Year of construction: 2015, machine/vehicle number: 2474368, load capacity: 408 kg, platform length: 2,300 mm, platform width: 900 mm, overall weight: 7,500 kg, transport length: 7,090 mm, transport width: 2,380 mm, transport height: 2,470 mm, construction height: 2,940 mm, fuel type: diesel, tire size: 914 x 370 mm, color: red, Technical specifications Year of manufacture: 2015 Engine: Diesel Working height: 16.21 m Platform height: 14.21 m Platform dimensions: 2.30 m x 0.90 m Overall dimensions (L x W x H): 7.09 m x 2.38 m x 2.47 m Max. outreach: 8.52 m Articulation point: 7.39 m Lifting capacity: 408 kg Superstructure rotation: 350° Work basket rotation: 90° Travel speed: 1 - 5 km/h Climbing ability: 45% Bsdeyg D Iqjpfx Aaqewh Weight: 7,500 kg General signs of use, fully functional

Condition: good (used), Year of construction: 1988, table width: 900 mm, Pressure: 160 t Stroke: 500 mm Bedpfx Aajyg E Tboqswh Table size: 900 x 630 mm Floor clearance: 800 mm Downward speed: 200 mm/sec Upward speed: 125 mm/sec Total power requirement: 17 kW Machine weight approx.: 7 t

Condition: excellent (used), Year of construction: 2012, Arburg 520S 1600-400/170 e² / Production Line with Geiger Robot Year of manufacture: 10.2012 Injection Unit: Bedpfoyctwgsx Aaqjwh Screw diameter: 35 mm Shot weight: 141 g Injection pressure: 2500 bar Dosage volume: 154 cc Clamping Unit: Clamping force: 160 t Tie bar spacing: 520x520 mm Platen size: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA – Touchscreen Additional equipment: 2K injection molding machine with rotary table and Geiger robot Very good technical condition Hybrid machine: energy-efficient and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 5 Hot runner control x 12 Reinforced injection units – bimetallic Machine with two cylinders / compressed nitrogen accumulators (additional charge for fast operation) Parallel movements Screw diameter in vertical injection unit: ⌀30 mm - 77 g/PS Integrated Arburg conveyor belt and sorting flap Original Weber rotary table, highly precise – electrically driven Purchase of the rotary table and robot for a surcharge Dimensions: Weight: 8140 kg Length/Width/Height: 4.81x1.84x3.45 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2013, Engel Victory 330H/80V/160 combi Ecodrive / Production line with the Sepro SR S5-25 S3 Trans robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2013 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2385 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 160 t Distance between tie bars: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Bsdsyctk Hepfx Aaqowh Operating hours: approx. 18,000 h in automatic mode Total number of operating hours: 24,312 h Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Screw diameter in the vertical injection unit: ⌀22 mm - approx. 28 g/hp It is possible to purchase a turntable Robot Sepro SR S5-25 S3 Trans Year of construction: 2013 3-axis robot: 3 axes are driven by servomotors (electric): X, Y, Z (telescopic) Travel distances in axes approx.: X-2000, Y-1000, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 8700 kg Length/width/height: 5.35x1.76x3.42 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: used, Year of construction: 1996, pressure 160 t distance between columns 1380 mm stroke 300 mm distance table/ram, max. stroke up, adjustment up 500 mm table surface area 1250 x 850 mm pressure of drawing cushion in table 80 t stroke of drawing cushion in table 150 mm Bjdpfxovut Ile Aaqjwh die cushion area 450 x 450 mm table height over floor 900 mm side window 250 x 400 mm ram surface 1350 x 850 mm speed down 400 mm/s speed up 350 mm/s working speed 50 mm/s oil volume 1850 l power requirement 58,0 + 11,0 kW weight 24,1 t dimensions (WxDxH) 2,85 x 2,15 x 4,6 m permitted for manual put-in according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure and way, hydraulic drawing cushion / ejector in table, cutting impact cushioning, mechanical depth stop (motoric adjustable), ram interlocking can be offered without or with putting into operation in given condition

Condition: used, Year of construction: 1979, pressure 160 t distance between columns 1620 mm stroke 600 mm Distance table/ram, stroke up 800 mm table surface area 1600 x 1100 mm table height over floor 750 mm die cushion pressure in table 63 t die cushion stroke in table 180 mm Die cushion area in table 1300 x 750 mm side window 600 mm ram surface 1600 x 1100 mm oil volume 1160 l power requirement 30,0 + 16,0 kW Bwedpsvut Ryofx Aaqoh weight 23,6 t dimensions (WxDxH) 2,9 x 2,3 x 4,65 m Height above floor 4,26 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F Video at seller's site before dismantling available

Condition: used, Year of construction: 1973, pressure 500 t distance between columns 1620 mm stroke 40 - 160 mm no. of strokes 32 / 48 Hub/min dayligth (stroke and adjustment up) 660 mm column travel -side 400 x 430 mm table surface area 1600 x 1300 mm table height over floor 750 mm ram surface 1400 x 1200 mm power requirement 44,0 / 66,0 kW weight of the machine ca. 56,00 t required space 3,55 x 2,55 x 5,1 m SPECIAL OFFER with motor, pneumatic clutch/brake combination (Desch), mechanical overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment as is where is, WITHOUT putting into operation / WITHOUT additional work, free loaded to truck Video of 'sister maschine' available Bwsdpfx Aaevuk Eujqsh