Used Ciata E-160 Tig Pulse for sale (18,917)

Condition: used, machine/vehicle number: 6176906, Year of construction: 2011, operating hours: 15,571 h, load capacity: 1,600 kg, lifting height: 6,750 mm, mast type: triplex, construction height: 2,960 mm, fork length: 1,200 mm, drive type: Elektro, Reach truck Chassis number: 6176906 Cgsljuhwq Seq Igntst Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Description: BT RRE 160 No.: R0280 Year of construction: 2011 Operating hours: 1,557 The machine is visually and technically in good condition. Charger on request Errors and prior sale reserved. If you have not found your truck, please contact us. We have a large selection of other appliances on site. Push fork, sideshift, fork positioner,

Condition: used, Functionality: fully functional, Year of construction: 2023, operating hours: 1 h, load capacity: 1,600 kg, lifting height: 205 mm, fuel type: electric, fork length: 1,150 mm, total length: 538 mm, drive type: Elektro, construction width: 726 mm, net weight: 480 kg, Low lift truck Load center of gravity: 600 Mast type: None Technical condition: New Front tires Type: Polyurethane Front tires Condition: 100% Rear tires Type: Polyurethane Rear tires Condition: 100% Battery Volt: 24V Battery Ah: 225Ah Cgolqsqy U I No Igntot Battery year of construction: 2023 Description: New device Pulse control, CE certificate,

Year of construction: 2001, Condition: used, max. wheel diameter 40 - 160 mm gear width 90 mm Cgjlomld Nmeq Igntst control Siemens Sinumeric voltage 400 V frequency 50 Hz connected load 34 kVA loading 800 Euro

Condition: used, Year of construction: 1993, pressing force: 160 t, Press brake used Make: BBM Model: AP ME 160-40 year of construction 1993 Pressure capacity 160 to. folding length 4050 mm Table width 190 mm Cgslqstufbnj Igntot Stroke 250 mm throat 315 mm Equipment CNC control Swivel operation at the front right CNC backgauge (X-axis) CNC electric depth adjustment Manually adjustable stop fingers adjustable table crowning, by crank Rear and side guards 3 front support arms Double foot switch Accessories: 2 Multi-V-matrices as well as 1 brand. Deer foot stamp

Year of construction: 2006, Condition: good (used), Functionality: fully functional, machine/vehicle number: 138883, TECHNICAL DETAILS pressure: 160 t folding length: 4100 mm column width: 3100 mm Control: DELEM DA66W table width: 120 mm Stroke: max. 800 mm Cgjlelp Iq Roq Igntjt Speed downwards: 80 mm/sec Speed upwards: 80 mm/sec Speed under load: 8 mm/sec MACHINE DETAILS oil capacity: 185 l total power requirement: 24 kW machine weight: approx. 13 t space requirement: approx. 4.8 x 2.2 x 2.2 m

Condition: used, Year of construction: 2014, operating hours: 1,979 h, load capacity: 1,600 kg, drive type: Elektro, Low lift truck Load center: 600 Technical condition: very good Battery Volt: 24V Battery Ah: 225Ah Description: Prices are subject to change, ex stock, plus freight and VAT. No warranty/guarantee and no return. Inspection possible by arrangement. Our general terms and conditions apply. Cjlqju D Swue Igntogt Option creep speed, PIN code, drive wheel Topthan support wheel Vulkollan fork rollers Vulkollan apron steel, E-bar, writing console

Condition: used, machine/vehicle number: 6281021, Year of construction: 2013, operating hours: 9,125 h, load capacity: 1,600 kg, lifting height: 6,750 mm, mast type: triplex, construction height: 2,950 mm, fork length: 1,200 mm, drive type: Elektro, Reach truck Chassis number: 6281021 Cslqsuhwnqo Igntjgt Mast type: Triplex Technical condition: good Battery Volt: 48V Battery Ah: 625Ah Battery year of construction: 2016 Description: BT RRE 160 H No.: R0278 Year of construction: 2013 Operating hours: 9,125 The device is visually and technically in good condition. Charger on request Errors and prior sale reserved. If you have not found your truck, please contact us. We have a large selection of other appliances on site. Push fork, sideshift, fork positioner,

Condition: new, Year of construction: 2018, Functionality: fully functional, Hello Celqelc Euks Igntogt we offer here a brand new climate outdoor unit from Toshiba. The device was built in 2018 but was never installed. The device has 45kW.

Condition: used, pressure 160 t throat 360 mm stroke 500 mm table surface area 1250x630 mm Cjlqolp U Hgj Igntsgt ram surface 1000x450 mm table height 1000 mm dayligth 800 mm weight of the machine ca. 8 t

Condition: new, Exhibition machine Infeed width: 1,400 mm Infeed height: 550 mm Rotor diameter: 1,600 mm Rotor knives: 4 pcs Stator knife: 1 pc, externally adjustable Cgolq Ignjgabfbetjt Infeed unit: 2 x 5 rollers Motor: 250-500 kW Machine weight: approx. 30,000 kg

Condition: used, rated capacity 23 kW Cgslqjucgnio Igntst rated current 43 A voltage 400 V For sale is an electrical control cabinet, which originally belonged to the a single-column eccentric press, make Erfurt, type PEE III/160

Condition: used, Functionality: fully functional, Year of construction: 2018, operating hours: 3,824 h, load capacity: 1,600 kg, lifting height: 4,500 mm, free lift: 1,594 mm, fuel type: electric, mast type: triplex, construction height: 2,062 mm, fork length: 1,150 mm, drive type: Elektro, Pedestrian stacker Load center: 600 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tires type: Polyurethane Rear tires type: Polyurethane Battery Volt: 24V Battery Ah: 500Ah Battery year of construction: 2018 Description: Celq Ignjtuhmaotogt Initialhub, Initial lift, Electric steering, Driver's platform

Condition: new, Year of construction: 2025, Cormak press brakes are advanced devices that enable precise bending of sheet metal thanks to appropriately selected punches and dies. Our offer includes models equipped with DELEM DA-58T and DELEM DA-66T controllers, which provide a wide range of functions that allow for the implementation of the most demanding bending tasks. Main Features: Front supports: 2 pieces, ensuring stability during bending operations X axis AUTOMATIC on a servo motor!!! Y1, Y2, R axes - AUTOMATIC on a servo motor!!! Automatic deflection arrow adjustment Automatic deflection arrow compensation front support on linear guides Control and Functionality: One-click program generation Advanced operator support based on algorithms Advanced, graphical simulation of bending sequences Included operator tips Algorithms that shorten the production process Automatic deflection arrow calculation (crowning) High-resolution TFT touch screen USB interface Operation Modes: Manual: full operator control Automatic single: ideal for repetitive operations Automatic serial: ideal for mass production using simple CNC Safety and Quality: Branded Components: German Rexroth hydraulic valve, SCHNEIDER, DELTA, EATON electrics, and Omron and Schneider safety circuit elements Steel Hydraulic Connections: made of steel pipes, which minimizes the risk of leaks and increases durability System Safety: includes side and rear metal barriers, safety switches and warning signs. The machine also has a CE certificate of conformity. As standard, a laser safety system from the Italian company DSP significantly speeds up work Ergonomics and Additional Facilities: Mobile Controller and LED Lighting: increase comfort and safety of work front supports on linear guides oil cooling system divided dies and punches quick tool clamps Additional Options: DSP laser safety system Technical Parameters Max. thickness of bent sheet metal (S235) up to 8.0 mm Nominal pressure 1600 kN Cgelqouw Scde Igntet Maximum length of bent sheet metal 2500 mm Depth of cut-out in beams (throat) 320 mm Maximum stroke of moving beam 180 mm Maximum opening height 455 mm Distance between beams 2000 mm Rear bumper departure 600 mm Engine power 11.0 kW Length 2700 mm Width 1650 mm Height 2500 mm Weight 8200 kg In order for the effect of the performed step bending to be satisfactory, it is necessary to perform certain calculations, which, however, require knowledge of several most important parameters related to the bending process - these are: Arc length - the distance between the ends of the curve of the bent part of the sheet metal counted on the inside of the bend; Number of bends – the number of individual bends that must be performed to obtain a bent sheet with a specified radius; the greater the number of bends, the smaller the angle of a single bend and, as a result, the smoother the arc; Distance between bends – the distance between individual bends performed during the process. Selection of die and punch Due to the final effect, the appropriate selection of press brake tools, i.e. the die and punch, is also important.

Condition: excellent (used), Functionality: fully functional, spindle bore: 84 mm, turning diameter: 420 mm, Jashone lathe model M 215 -E 1600mm e.p with 84mm quill hole, speeds from 50 to 1500 rpm, swing over bed 440mm, over neck 650mm, 5.5 hp. With quick-change turret, with fixed steady rest (not original, has to be adapted), with protections, lathe in good condition. Cgjlq Igevv Nnqentst

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Cslq Igemhhf Sontjgt Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2024, Functionality: fully functional, working width: 1,600 mm, total width: 5,800 mm, total height: 4,280 mm, total length: 21,234 mm, overall weight: 15,000 kg, type of input current: three-phase, input voltage: 380 V, warranty duration: 6 months, Complete new bakery line for Flate bread as Pita bread and Naan bread, complete information in the attachements Cgslq Ignjui Ipnotot

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) Colsmhh Dtsq Igntsgt - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. Cgslsh Ek Dasq Igntet The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Year of construction: 2023, Condition: new, SEMIX M160S4 provides the highest capacity amongst mobile concrete batching plant in the world. SEMIX Mobile 160S4 equipped with 6000/4000 capacity twin shaft concrete mixers. In SEMIX Concrete Mixers NiHard4 or Hardox 450 wearings are used according to the Concrete recipe’s sillicium ratio. Cjlq Igegazc Tentjgt Aggregate storage hoppers can be fed by wheeled loaders with a single ramp. Aggregates are weighed in the weighing conveyor which transfers aggregates to the transfer conveyor. Having two separate conveyors providing accuracy in weighing and performance for reaching higher Concrete outputs. All SEMIX Aggregate Storage hoppers are bent trapezoidal shape for having an extra strength. All SEMIX Concrete Batching Plants are being controlled by a SCADA system with a Schneider PLC integrated. Users can follow all used materials and integrate it their CRM system. SEMIX's engineering team can intervene in the Automation system online to provide service.

Condition: used, Year of construction: 2020, operating hours: 2,700 h, lifting height: 4,850 mm, free lift: 1,650 mm, fuel type: electric, mast type: triplex, fork length: 1,150 mm, total height: 2,250 mm, total length: 2,650 mm, total width: 800 mm, color: other, Empty weight: 1.939 kg Colq Igowgv Rrjntogt Lifting capacity: 1.600 kg - Mast: Triplex - Free lift: 1650mm - Type: Stand up stacker - Overhead clearance: 2250mm - Options: Doppelstock - Fork length: 1150mm - Fork width: 570mm - Lifting height: 4850mm - Lifting capacity: 1600kg - Year: 2020 - Documentation available: No - CE mark available: Yes - Operating hours: 2700 - Battery voltage: 24V - Brand/Type: 24V5PzB - Capacity: 500Ah - Battery year of construction: 2020 - Drive: Elektric - Transport dimensions: 2650mm x 800mm x 2250mm (l x w x h) - Transport weight [kg]: 1939kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 1994, faceplate diameter 1400 mm 51228 table turning speeds 315 U/min turning height 1500 mm swing dia. max. 1750 mm Cgolq Igewgi N Uontot

Year of construction: 2023, Condition: new, SEMIX M160S4 provides the highest capacity amongst mobile concrete batching plant in the world. SEMIX Mobile 160S4 equipped with 6000/4000 capacity twin shaft concrete mixers. In SEMIX Concrete Mixers NiHard4 or Hardox 450 wearings are used according to the Concrete recipe’s sillicium ratio. Cslqjgazdxe Igntjgt Aggregate storage hoppers can be fed by wheeled loaders with a single ramp. Aggregates are weighed in the weighing conveyor which transfers aggregates to the transfer conveyor. Having two separate conveyors providing accuracy in weighing and performance for reaching higher Concrete outputs. All SEMIX Aggregate Storage hoppers are bent trapezoidal shape for having an extra strength. All SEMIX Concrete Batching Plants are being controlled by a SCADA system with a Schneider PLC integrated. Users can follow all used materials and integrate it their CRM system. SEMIX's engineering team can intervene in the Automation system online to provide service.

Condition: ready for operation (used), Year of construction: 1994, Functionality: fully functional, machine/vehicle number: 51228, faceplate diameter: 1,400 mm, total height: 1,500 mm, rotational speed (max.): 315 rpm, Stock number 2052-06921 Machine type: Vertical Turret Lathe - Single Column Make: DöRRIES-SCHARMAN Type: VCE 1600/140 Year of manufacture: 1994 Condition: Used Control type: CNC Storage location: Schiefbahn Country of origin: Germany Cjljwf A Nrsq Igntjgt Delivery time: Immediately after receipt of payment Freight basis: ex warehouse - free on truck Maximum swing diameter: 1750 mm

Year of construction: 2023, Condition: new, SEMIX M160S4 provides the highest capacity amongst mobile concrete batching plant in the world. SEMIX Mobile 160S4 equipped with 6000/4000 capacity twin shaft concrete mixers. In SEMIX Concrete Mixers NiHard4 or Hardox 450 wearings are used according to the Concrete recipe’s sillicium ratio. Aggregate storage hoppers can be fed by wheeled loaders with a single ramp. Aggregates are weighed in the weighing conveyor which transfers aggregates to the transfer conveyor. Having two separate conveyors providing accuracy in weighing and performance for reaching higher Concrete outputs. All SEMIX Aggregate Storage hoppers are bent trapezoidal shape for having an extra strength. Cslq Ignegazdqstogt All SEMIX Concrete Batching Plants are being controlled by a SCADA system with a Schneider PLC integrated. Users can follow all used materials and integrate it their CRM system. SEMIX's engineering team can intervene in the Automation system online to provide service.

Year of construction: 2023, Condition: new, SEMIX M160S4 provides the highest capacity amongst mobile concrete batching plant in the world. Cgjlq Igsgazctsntet SEMIX Mobile 160S4 equipped with 6000/4000 capacity twin shaft concrete mixers. In SEMIX Concrete Mixers NiHard4 or Hardox 450 wearings are used according to the Concrete recipe’s sillicium ratio. Aggregate storage hoppers can be fed by wheeled loaders with a single ramp. Aggregates are weighed in the weighing conveyor which transfers aggregates to the transfer conveyor. Having two separate conveyors providing accuracy in weighing and performance for reaching higher Concrete outputs. All SEMIX Aggregate Storage hoppers are bent trapezoidal shape for having an extra strength. All SEMIX Concrete Batching Plants are being controlled by a SCADA system with a Schneider PLC integrated. Users can follow all used materials and integrate it their CRM system. SEMIX's engineering team can intervene in the Automation system online to provide service.