Used Weiss Fs 1320 for sale (129)

Condition: excellent (used), Weiss SC 1000/+20IU Corrosion Climatic Cycle Test Chamber Weiss SC 1000/+20 JU Corrosion Climatic Cycle Test Chamber The test system is a combination of a climatic test chamber with variable temperature and humidity and a corrosion test chamber with a salt spray test. At-risk metallic components are tested for corrosion in a time-lapse manner according to the relevant standards. Temperature Working Range Temperature: +20 °C ... +60 °C Temperature variation over time: +0.5 °C Ppedpfx Aioph U Dhj Ret Climatic Working Range Temperature: +20 °C ... +60 °C Temperature variation over time: +0.5 °C Relative Humidity: 10...98 % RH Temperature variation over time: 3...5 % RH Dew point: +12 °C ... +59 °C Salt spray test SS (ambient temperature range +5 °C ... +50 °C) according to DIN 50 021 (salt spray via dual-fluid nozzle, 1.5 x 0.5 mV 80 cm h) Control Digital measurement and control system SIMCON/32*-Net with touchscreen control panel Interfaces - Serial interface RS 232 C - Parallel printer interface Operating modes adjustable via process controller: - Temperature mode - Air conditioning mode - Salt spray test - Direct spraying with saline solution - Condensate load - Flushing test chamber walls - Drying/ventilating test chamber Temperature sensor: Pt 100 resistance thermometer Humidity sensor: Psychrome fresh measuring device TFT (with forced humidification) Technical data SC 1000/+20 JU Usable space dimensions Height up to sloped roof approx. 1000 mm + roof approx. 350 mm Width approx. 1100 mm Width between heaters approx. 1000 mm Depth approx. 1000 mm Test room door made of glass, hinged on the left Height approx. 1350 mm Width approx. 1000 mm External dimensions including unit components and control cabinet Height approx. 2100 mm Width approx. 1450 mm Width with touch control panel approx. 1700 mm Depth approx. 2600 mm Floor load max. 100 kg Brine storage tank approx. 200 l, with level monitoring separately next to/behind the unit Height approx. 1000 mm Width approx. 600 mm Depth approx. 900 mm Electrical connection: 400 V Power rating: 13 kW Weight: 1300 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 1990, condition: good (used), Weiss temperature test chamber WT 11-18 KWP 500/40  Spring, summer, autumn and winter - your products must be able to withstand different temperatures during manufacture, transport, storage and use. The temperature test chambers from Weiss Technik help you to test the influence of thermal conditions on the properties, function and service life of your products. Manufacturer: Weiss Technik Type: KWP 500/40 - 180 DU Designation: WT 11-18 Type: Temperature test chamber Test chamber volume: 500 ltr. Temperature range: -40°C to +180°C Outside dimensions: 110 cm wide, 173 cm deep and 204 cm high Ppedpfx Aeh Izh Isi Ret Dimensions inside: 80 cm wide, 85 cm deep and 85 cm high Pressure: 25 bar Voltage: 380 V Frequency: 50 Hz kVA: 4.7 Refrigerant: R 502 Year of manufacture: 1990 Condition: used complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: as good as new (ex-display), Year of construction: 1997, machine/vehicle number: 1MB241H-6D-A111-A1, spindle speed (max.): 5,000 rpm, input voltage: 380 V, overall weight: 400 kg, power: 18 kW (24.47 HP), Spindle from Weiss GmbH, type 174405B, year of manufacture 1997. Unused, stock. For further details see type plate / pictures. Packaging and loading included. Ppedpfxjtq H Suo Ai Rot

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: CR300589, overall weight: 600 kg, This is a turntable with one axis from Weiss The servo motor on this rotary table has been replaced with one from KUKA so that you can easily install this rotary table as the seventh axis on the control cabinet of your KUKA robot. Psdpfx Ajttwglsi Rjpt Dimensions: Diameter of the plate: 910mm Table height: 500mm

Condition: used, Weiss Gallenkamp SGC 110 Cabinet Weiss Gallenkamp SGC 110 Cabinet 230 volts, Pjdpoyn Ediofx Ai Rept 480 watts, width: 140 cm, height: 200 cm, depth: 83 cm Temp: 15 Celsius Good working condition. Please check out our other listings as well.

Year of construction: 1994, condition: ready for operation (used), functionality: limited functionality, Capper of the type Weiss W-1-8 for sale. The machine is operational but requires some maintenance/TLC. Suitable for both screw caps and press caps in various formats. Format parts are included; a list can be provided upon request. More photos and video are available if needed. Pjdpfx Aiexztkpj Ropt

Condition: ready for operation (used), Year of construction: 1994, heating capacity: 6,000 kW (8,157.72 HP), temperature: 120 °C, Steam boiler Manufacturer: Weiss Last TÜV inspection: 2024! For firing with wood chips and shavings Including oil burner as alternative firing option Output: 6000 kW Permissible operating overpressure: 1.0 bar Ppjdoyhlvfjpfx Ai Ret Permissible superheated steam temperature: 120 degrees Celsius Boiler volume at nominal water level: 16,670 l Without dismantling

Condition: ready for operation (used), Year of construction: 1988, A textile cutting and winding system consisting of several individual machines is available. The machine sews tubular bales together, cuts and rolls them into large rolls (bobbins). Working width for elastic/non-elastic fabrics: 1860mm/2400mm, shear width: 980mm, production capacity: 200kg/h, tubular bale weight: approx. 30kg, large roll weight range: 300kg-500kg, roll width: 1780mm, roll width: 2700mm, current fabric web width: 1700mm, total system dimensions X/Y/Z: approx. 5200mm/4000mm/5200mm, total system weight: approx. 3000kg. On-site inspection is possible. Ppjdpfx Aiju Afzws Rot

Condition: used, Year of construction: 2008, Here are some key details: Pjdpjxmurxsfx Ai Rspt - CNC universal cylindrical grinding machine WUG 21 base machine by CNC-Technik Weiss. (The WUG 21 features a Karstens machine bed on which the CNC system is mounted.) - Year of manufacture: 2008 / operated in single-shift use only - 1000 mm between centers - Workpiece spindle headstock and tailstock MK4 - Wheel diameter up to 500 mm - Wheel mounting at a 26.5° angle - Grinding wheel drive with programmable SUG - Grinding spindle headstock manually swivellable on air cushion - Wheel positioned on the right - Internal grinding attachment mounted at the rear, including dressing device - Eckelmann control system - DIN programming - Cycle programs - Manual grinding: yes - Automatic dressing - Marposs acoustic emission monitoring for external grinding wheel, including software package - Grinding wheel spindle and workpiece spindle driven by V-belt drive

Condition: used, Year of construction: 1980, functionality: unexamined, machine/vehicle number: GTTS 220, total height: 144 mm, total length: 135 mm, total width: 96 mm, Equipment: documentation/manual, Used Votsch/Weiss GTTS 220 Climate Chamber Manufacturer: Votsch/Weiss Model: GTTS 220 | 20 External dimensions: 135cm x 96cm x 144cm (length x width x height) Max internal dimensions: 65cm x 92cm x 54/40cm (width x depth x height) Voltage: 220/380 V Refrigerant type: R12 Ppodpfsx H N Drex Ai Rst Includes manual (installation and operation handbook)

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: CR416871, overall weight: 661 kg, CR0700K Heavy-duty table Total transmission ratio: 260 Table drive speed [1/min]: 11.5 Table output torque [Nm]: 8000 MTM [kgm2]: 3,500 Turning time: in sec: 3.3 Shift angle in°: 180 Pause time (s): 4 Installation position: normal (MP1) Drive position: DP1 (laterally inside) Disc bearing: Standard Rotary encoder: without Motor: Fanuc Special clamping disk CR: Standard Partial accuracy: +/-15" Repeat accuracy: +/- 10" Ppedpetp T Smefx Ai Rjt Axial and radial run-out accuracy: 0.02mm Painted in RAL: 7035 Assembly instructions

Condition: good (used), Year of construction: 2012, Motor: 1.1 kW For technical data, see illustration. Ppodexbgg Rspfx Ai Rot

Condition: used, Year of construction: 2012, Motor: 0.75 kW Technical data: see illustration. Ppodexctw Sopfx Ai Rot

Condition: used, Year of construction: 2012, Motor: 0.75 kW Technical data: see illustration. Psdpjxcty Tjfx Ai Rspt

Condition: good (used), Year of construction: 2012, Motor: 1.1 kW Ppsdpfx Aexbgfmsi Ret For technical data, see illustration.

Condition: good (used), Year of construction: 2012, Motor: 1.1 kW For technical data, see illustration. Podpfxexbgfge Ai Ropt

Year of construction: 2001, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 58226018400020, Weiss Temperature Chamber Type: WT11-270/70/10 Section No.: 58226018400020 Control: Simcon/32-NET Version: 00.1902 Ports: Left (2x) NW 50 mm, Right (3x) NW 125 mm Temperature Range: -70°C to 180°C Test Chamber Volume: 270 liters Door with window, interior lighting Water-cooled temperature chamber Pedpfsv T Tncex Ai Rjpt Compressed air dryer type: ZANDER Temperature change rate cooling: 10 K/min Temperature change rate heating: 10.0 K/min Temperature deviation over time ± 0.1 to ± 0.5 K Temperature homogeneity over space ± 0.5 to ± 2.0 K Test Chamber Dimensions: Width 580 mm x Depth 615 mm x Height 750 mm Housing dimensions: Width 895 mm x Depth 2080 mm x Height 1950 mm Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 14 kW, Rated current 26 A Refrigerant: R-404A/R-23

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 59 226 035 580 030, Type: SC/KWT 450 Salt Spray Chamber Psdox Ig Tmopfx Ai Rept Technical Data: - Test chamber volume: 450 liters - System weight: 140 kg (test chamber + machine unit; without brine and without test specimens) - Brine reservoir: 180 liters - Maximum load: 100 kg, 8 kg per support rod - External dimensions: Height without hood 920 mm, height with hood 1370 mm, width 1930 mm, depth 800 mm - Test chamber dimensions: Height 740 mm, width 850 mm, depth 570 mm - Control unit: Simcon/32 - Condition: used - Operating hours: 22,914 h Connection Data: - Voltage: 1/N/PE AC 230V ±10% 50Hz - Rated power: 2.0 kW - Rated current: 8.5 A - Power consumption: 450 Wh/h - Brine consumption: approx. 0.5–1 liter per hour - Compressed air consumption: approx. 1.5 m3/h at 0°C and 1 bar - Deionized water consumption: approx. 0.4 liters per hour Application Areas: - Salt spray test in accordance with DIN 50021 - Condensation water test in accordance with DIN 50017 - Standard climate (ventilation): DIN 50014 The system has been serviced and calibrated annually by the manufacturer, with no outstanding repairs (full maintenance contract). Last maintenance/calibration/DGUV3 inspection: 03/2025. The system will remain connected until week 3 and can be inspected during this time. All installation and operating manuals as well as the service manual are available.

Year of construction: 2013, condition: used, Ask for additional details! 2 units available. Pjdpox Nih Aefx Ai Ropt

Condition: ready for operation (used), Year of construction: 2017, operating hours: 20,995 h, functionality: fully functional, machine/vehicle number: W11106617/144, grinding length: 1,000 mm, grinding wheel diameter: 400 mm, grinding diameter: 390 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, TECHNICAL DETAILS Grinding length: 1,000 mm Grinding diameter: 0–390 mm Internal and external grinding: up to 1 m Max. workpiece weight, unsupported (MK 4): 100 Nm Max. workpiece weight between centers: 250 kg Podpfx Aew Nwxuoi Ropt X-axis Feed Rapid traverse: 350 mm Rapid feed rate: 12 m/min Fine feed increment: 0.0001 mm Z-axis Feed Max. travel: 1,150 mm Travel speed: 12 m/min Linear scale resolution: 0.0001 mm Spindle Data Internal grinding spindles: 80 x 350 mm Grinding Wheel Spindle Head Grinding wheel diameter: 400 mm Drive power: 5.5 – 7.5 kW Peripheral speed: 25 – 50 m/s Workpiece Spindle Head Speed range: 1 – 1,000 rpm Internal taper: MK4 Centering diameter: 63 / 80 mm Tailstock Quill taper: MK4 Quill stroke: 45 mm Filtration and Extraction Paper band filter system: 350 l tank Mechanical mist extraction: 600 m³/h MACHINE DETAILS Operating hours: 20,995 h EQUIPMENT Full enclosure Manual balancing system Touch-trigger longitudinal position indicator Leveling shoes for alignment Grinding centers MK 4 solid and half center (carbide-tipped) Dressing tool 0.5 carat diamond

Condition: used, Year of construction: 2020, grinding diameter 390 mm grinding length 650 mm centre height 200 mm workpiece weight max. 250 kg x-axis 380 mm z-axis 1150 mm sanding disc diameter 400 mm peripheral speed 20-50 m/sec workpiece spindle stepless 1 - 650 U/min tailstock quill taper MT 4 quill stroke 45 mm dia. of quill 50 mm total power requirement 22 kW Ppodpfx Ajx Rn Uqei Rjt

Year of construction: 2013, condition: used, Rotary Indexing Table Rotary Table Rotary Drive Welding Positioner Positioning Table WEISS TYPE: CR700 CAA Year: 2013 Rotary indexing table/positioning table with control cabinet including frequency inverter and PILZ PLC control. Diameter of mounting plate approx.: 700 mm Diameter of inner collar approx.: 320 mm Height without base approx.: 290/320 mm Base diameter approx.: 1600 mm Base height approx.: 190 mm Max. dynamic axial force: 70,000 N Pedpfoxdv N Hsx Ai Rspt Weight approx. 585 kg plus base There are 4 pieces of these rotary drives from Weiss available. For further details or purchase of multiple rotary drives: Please enquire.

Condition: used, Weiss clamping carriage fully hydraulic with auxiliary trolley Track width: 90 cm Ppodoq U N A Sepfx Ai Rst Has already been dismantled and is ready for loading at any time. Location: Austria, near Kufstein

Condition: used, Clamping trolley white fully hydraulic with auxiliary trolley with tracks track width 90 cm immediately available Location: Austria, near Vienna Ppedpfxjip Ty Te Ai Rst

Condition: new, Year of construction: 2013, machine/vehicle number: TC359308, overall weight: 112 kg, Weiss TC320T indexing table complete with TS004E control board - NEW IN PACKAGING Number of stations 08; Speed ​​level F; Mounting position - horizontal; Gear position - underneath; Motor position - inside. Power supply voltage 400/480V AC/three-phase User manual in English EC declaration of conformity The set also includes a new electronic TS004E control board. User manual in English Pjdpfx Aiev Rm S Ns Ropt