Used Weiss Heating for sale (133)

Condition: used, Weiss climate testing chamber with seat pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test chamber: Material: Stainless steel Dimensions Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Volume: 1440 liters Outer housing Material: Double-coated Zincor sheet Dimensions Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paint: light gray (RAL 9002) Door, double-leaf: hinged on the left and right Equipment: Passage through the floor and ceiling: 2 pieces each, nominal diameter 100 mm, for installing the pulsation table Passage in the side walls: 1 piece each, left, right, 100 mm Refrigeration unit: air-cooled Control: Digital measuring and control system DMR Basic control panel: integrated in the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS-Windows Performance data: Temperature range without climate control: +20...+100 °C Temperature stability without climate control: +0.2 … ±0.5 K (time-dependent) depending on the range, in the stable state Temperature range with climate control: 20...+95 °C Temperature stability with climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the stable state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH, depending on the range, in the stable state Temperature change rate measured in the outlet without test specimen and without load - Cooling: 0.5 K/min on average, between +100 and +20 °C - Heating: 0.5 K/min on average, between +20 and +100 °C The performance data refer to an ambient temperature of max. +25 °C and the specified rated voltage. Hodpfxoxbgrgj Abaow For proper operation of the system, the ambient temperature must be between +10 and +35 °C. Connections / Other Protection class: IP 32 for the control cabinet Sound pressure level during free-field measurement at a distance of 1 m in front of the device: 60 dB (A) Humidification water: fully demineralized, conductivity max. 20 μS/cm, pH value 6 - 7, automatic replenishment Condensate drain: backpressure-free, 3/4" hose connection Mains connection: 400 V; 3 PH+N PE; 50 Hz Connection value: max. 10 kVA Weight: approx. 1160 kg Seat testing device with steel structure for mounting and securing to the climate testing chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for test specimen changeover, 12 weights each with 5 kg • 1 base frame in normal steel welded construction for fastening to the underside of the climate testing chamber. This frame is equipped with removable sheets on all sides and has 2 folding doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric disks with bearing and tachometer, 2 connecting rods, 2 ball guides • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for connecting the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for connecting the buttock simulation • 2 load rods, 600 mm long, made of stainless steel (The connection to the test specimen is not included in our price, but can be offered at a later date after a precise definition.) • 2 three-phase motors, 2 belt drives with tensioning devices • 1 pneumatic control with 2 hand valves, a filter-regulator unit and a shut-off valve, 1 electrical control cabinet with 2 SEW frequency inverters, hand switch, emergency stop button, 2 push buttons, 2 release buttons, 2 speed indicators, 2 potentio

Condition: used, Weiss   Type: WT-1000/70/5   Weiss temperature testing chamber, water-cooled With a temperature change rate of 5 K/min   Hjdpfoy D Nyuex Abaew Data for temperature tests: Temperature range: -70 °C to +180 °C Temporal temperature deviation in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature homogeneity: ± 0.5 to ± 2 K   Temperature change rate: Heating: 6.1 K/min Cooling: 6 K/min   Permissible test specimen weight: Total load on the test chamber floor: 150 kg Load per insert shelf: 50 kg   Dimensions: Test chamber dimensions: Height 950 mm, Width 1100 mm, Depth 950 mm External dimensions: Height 2000 mm, Width 1415 mm, Depth 2105 mm   Test chamber volume: 990 liters   Data for operation: Nominal voltage: 3/N/PE AC 400 V ± 10% 50 Hz Nominal current: 38 A Nominal power: 26 kW Refrigerant: R404 / R23 Weight: approx. 955 kg   Information for buyers: To ensure the safety of our customers, the following work will be carried out on the offered climate chambers in advance:   1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. Documented test run after successful inspection   Condition: used   Scope of supply: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Type: WT1-600/70 Weiss Temperature Test Chamber, Water-Cooled Technical Data: Test chamber designation: WT1-600/70 Hodozd R Svjpfx Abajw External dimensions (without hinges and door closure) Height 1980 mm, Width 1085 mm, Depth 1655 mm Internal dimensions Height 950 mm, Width 800 mm, Depth 800 mm Test chamber volume: approx. 600 liters Cold/heat operation: -70 to 180°C Temperature change per unit of time Cooling: approx. 2.5 K/min Heating: approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19 A Permissible weight of test specimens Total load on the shelf supports: 80 kg Refrigerant: R 404A + R23 Weight: 600 kg For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Hsdszd R Dropfx Abaew   Type: WT-600/70   Weiss Temperature Test Chamber, Water-Cooled   Technical Data: Test chamber designation: WT-600/70   External dimensions with hinges and door closure Height 1995 mm, Width 1090 mm, Depth 1660 mm   External dimensions without hinges and door closure Height 1995 mm, Width 1000 mm, Depth 1660 mm   Internal dimensions:   Height 950 mm, Width 800 mm, Depth 800 mm   Test chamber volume: approx. 600 liters   Cooling / Heating operation -70°C to 180°C   Temperature change per unit of time Cooling down approx. 2.5 K/min Heating up approx. 4 K/min   3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19 A Fuse on customer side: 32 A, slow-blow Permissible test item weight Total load of the shelf supports 80kg   Test chamber floor 80kg, insert shelf 40kg   Refrigerant: R 404A/R23   Weight: 675 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss   Type: WK-600/70 (I)-(II) 2 G EEx /22605147   Weiss Climate Chamber, Water-Cooled   (Test chamber, explosion-proof) INERTING WITH NITROGEN / EXPLOSION-PROOF TEST CHAMBER   Technical Data: Test chamber designation: WK-600/70 (I)-(II) 2 G EEx   External dimensions with hinges and door closure Height 1995 mm, Width 1090 mm, Depth 1660 mm   External dimensions without hinges and door closure Height 1995 mm, Width 1000 mm, Depth 1660 mm   Test chamber volume: approx. 600 liters   Cold / Heat operation -70 to 180°C   Climate operation 10 – 95°C Humidity 10...98 % RH Hjdpjzh D Ryefx Abaew Temperature change per unit of time Cooling approx. 2.5 K/min Heating approx. 4 K/min   3/N/PE AC 400V ±10% 50Hz Rated power: 14 kW Rated current: 25 A Fuse, customer-supplied: 32 A slow-blow Permissible test item weight Total load of the grid supports 80 kg   Test chamber floor 80 kg, insert grid 40 kg   Weight: 800 kg   Refrigerant: R 404A/R 23   (Evaporator of the air conditioning system has been replaced)   For your safety as a buyer, here is the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data and information are subject to change!)   We will gladly answer any further questions you may have by phone.

Condition: used, Weiss   Type: WT1-340/30   Converted to R452a   Weiss temperature chamber, air-cooled   Temperature range: from -30°C to 180°C   Temperature change rate, cooling: 1.6 K/min Temperature change rate, heating: 2.1 K/min   Test chamber dimensions: Width 550 mm x Depth 750 mm x Height 800 mm Housing dimensions: Width 800 mm x Depth 1500 mm x Height 1800 mm Hjdpfx Abszd Rw Ssajw   Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 4.9 kW, Rated current: 9 A   Refrigerant: R452a   Weight: 515 kg   For your safety as a buyer, please note the following information:   The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have over the phone.

Year of construction: 2021, condition: like new (used), WeissTechnik ClimeEvent C/180/70a/3 climatic chamber – year 2021 – EXCELLENT CONDITION For sale: a professional WeissTechnik ClimeEvent C/180/70a/3 climatic chamber, manufactured in Germany in 2021. The unit is in excellent technical and visual condition. It has only been used a few times, so it shows minimal signs of wear. The chamber was purchased from an official Polish distributor and has been serviced regularly. Key information: * Year of manufacture: 2021 * Used only a few times * Technical and visual condition: EXCELLENT * Unit is 100% functional * Regularly serviced Hsdpfxez Tzvvs Abasw * Purchased from an official distributor in Poland * German production – high quality and reliability Technical specifications: * Manufacturer: Weiss Technik * Series: ClimeEvent * Model: C/180/70a/3 * Year of manufacture: 2021 * Chamber volume: 180 liters * Temperature range: from -70°C to +180°C * Relative humidity control: typically from 10% to 98% RH * Rated current: 15 A * Rated power: 5.3 kW * Power supply: 3/N/PE AC 400 V * Country of manufacture: Germany Temperature and humidity control The WeissTechnik ClimeEvent climatic chamber enables precise environmental testing under controlled temperature and humidity conditions. The humidity control system allows for simulating various climatic conditions, including high-humidity environments, which makes it possible to test the resistance of materials, electronic components, and finished products. Possible applications: * Climatic and environmental testing * Resistance testing to high and low temperatures * Testing under high-humidity conditions * Material aging studies * Testing of electronic components * Quality control in industry * Laboratory and research & development (R&D) studies Condition of the unit The chamber has been used sporadically and is in excellent condition. It represents an attractive alternative to purchasing a new unit, offering professional research capabilities at a significantly lower cost. The unit is fully functional and ready for further use.

Condition: used, Weiss   Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled   Item description:   For sale is a Weiss Technik TS 60 thermal shock test chamber. The chamber is ideally suited for rapid temperature cycling tests (e.g., according to IEC, MIL-STD, JEDEC) and has been well maintained.   Volume & Internal Dimensions:   Test volume: 60 liters   Internal dimensions of basket / test chamber (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm   Temperature ranges & cycling   Hot chamber +50 °C to +220 °C Cold chamber −72 °C to +70 °C   Transfer time (basket between both zones): < 10 seconds   Heating rate / heating speed up to 17 °C/min Cooling rate / cooling speed up to 3.7 °C/min   In single mode (cold zone only), heating rate: approx. 3.2 °C/min   Temperature deviation & homogeneity   Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C   Load / payload & lifting system   Basket / lifting system load: 20 kg maximum load capacity Transfer basket secured by protective grilles on all sides   Other features & equipment   Hjdpezii A Rsfx Abaew Noise level: approx. 58 dB(A) during operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces   Electrical connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power approx. 8.5 kW Rated current approx. 25 A Fuse on customer's side 32 A Refrigerant R-404A / R-23   Weight: 800 kg   For your safety as a buyer, please note the following:   The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run.   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Year of construction: 2001, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 58226018400020, Weiss Temperature Chamber Type: WT11-270/70/10 Hodpfxev T Tnce Abaew Section No.: 58226018400020 Control: Simcon/32-NET Version: 00.1902 Ports: Left (2x) NW 50 mm, Right (3x) NW 125 mm Temperature Range: -70°C to 180°C Test Chamber Volume: 270 liters Door with window, interior lighting Water-cooled temperature chamber Compressed air dryer type: ZANDER Temperature change rate cooling: 10 K/min Temperature change rate heating: 10.0 K/min Temperature deviation over time ± 0.1 to ± 0.5 K Temperature homogeneity over space ± 0.5 to ± 2.0 K Test Chamber Dimensions: Width 580 mm x Depth 615 mm x Height 750 mm Housing dimensions: Width 895 mm x Depth 2080 mm x Height 1950 mm Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 14 kW, Rated current 26 A Refrigerant: R-404A/R-23

Condition: used, Weiss SC 1000/+20IU Corrosion Climate Change Test Chamber Weiss SC 1000/+20 JU Corrosion Climate Change Test Chamber The test system is a combination of a climate test cabinet with variable temperature and humidity and a corrosion test cabinet with a salt spray test. In a time-lapse sequence, susceptible metallic components are tested for corrosion according to the relevant standards. Temperature operating range: Temperature: +20 °C ... +60 °C Temporal temperature deviation: +0.5K Climate operating range: Temperature: +20 °C ... +60 °C Temporal temperature deviation: +0.5K Relative humidity: 10...98 % RH Temporal humidity deviation: 3...5% RH Dew point: +12 °C ... +59 °C Salt spray test SS (temperature range ambient temperature +5 K ... +50 °C) according to DIN 50 021 (salt spray via 2-nozzle diffuser, 1.5 x 0.5 m, 80 cm height) Control: Digital measurement and control system SIMCON/32*-Net with touch panel Interfaces: serial interface RS 232 C, parallel printer interface Operating modes adjustable via process controller: - Temperature operation - Climate operation - Salt spray test - Direct spraying with salt solution - Condensation load Hjdpfjph U Dhox Abaew - Flushing of test chamber walls - Drying/ventilation of test chamber Temperature sensor: Pt 100 resistance thermometer Humidity sensor: psychrometric fresh measuring device TFT (with forced humidification) Technical data SC 1000/+20 JU Usable space dimensions: Height up to roof slope approx. 1000 mm + Roof approx. 350 mm Width approx. 1100 mm Width between heating elements approx. 1000 mm Depth approx. 1000 mm Test chamber door made of glass, left-hinged Height approx. 1350 mm Width approx. 1000 mm External dimensions including unit components and control cabinet Height approx. 2100 mm Width approx. 1450 mm Width with touch panel approx. 1700 mm Depth approx. 2600 mm Floor load max. 100 kg Brine storage tank approx. 200 l, with level monitoring, located separately beside/behind the unit Height approx. 1000 mm Width approx. 600 mm Depth approx. 900 mm Electrical connection: 400 V Connection power: 13 kW Weight: 1300 kg You can find more new and used items in our shop! International shipping costs on request!

Condition: used, Weiss Type: SWT 600/800-S Spray Water Test Unit for IP protection tests IPX1 / IPX2 / IPX3 / IPX4 / IPX4K / IPX9K For sale is a professional spray water test unit from Weiss Umwelttechnik GmbH. The unit is used to perform standardized water, spray water, and ingress protection tests on components, housings, electronic components, vehicle parts, and technical products. Suitable for industry, automotive, electronics, quality assurance, development, testing laboratories, as well as research and material testing. Operation is via an integrated touch panel. Test sequences can be automated. The unit features a stainless steel test chamber, rotating test table, swivel arm, water circulation, and available test accessories. Technical data according to the nameplate / documentation: Electrical data: Voltage: 3/N/PE AC 400 V ±10 % Frequency: 50 Hz Rated power: 17 kW Rated current: 30 A Wiring diagram No.: 82962 CE marking available Water connection according to documentation: Water inlet: R 3/4" Water outlet: R 1 1/4" Water pressure supply line: approx. 2 – 6 bar Water pressure IPX9K: adjustable approx. 80 – 100 bar Turntable speed: approx. 1 to 5 RPM Swivel speed: approx. 60 °/s Permissible ambient temperature according to documentation: approx. 10 °C to 35 °C Dimensions and weight: Test chamber SWT 600/800: approx. 2350 x 2400 x 2650 mm with hinges and door lock Test chamber without hinges and door lock: approx. 2350 x 2400 x 1850 mm Weight of the test chamber: approx. 650 kg High-pressure unit: approx. 850 x 1200 x 800 mm Weight of the high-pressure unit: approx. 380 kg Total weight according to available data: approx. 1030 kg Noise level according to documentation: approx. 88 dB(A) Heat dissipation to the environment: average approx. 1 kW maximum approx. 3.5 kW Equipment: Touch panel Hodozachcspfx Abasw Stainless steel test chamber Rotating test table Swivel arm Water circulation pump Nozzle ring / spray ring High-pressure unit Flow meter ESD earthing point CE marking Robust industrial design Available documentation: Operating manual EC declaration of conformity Quality test certificate Technical documentation as shown in the pictures Accessories include, among others, as shown in the pictures: Various spray and test components Nozzle ring / spray ring Swivel arm accessories Flow meter Connection components Tools / keys Test accessories Documentation and documents Inspection and testing on site is possible and desired after prior appointment. Scope of delivery: Weiss Umwelttechnik SWT 600/800-S Spray Water Test Unit High-pressure unit Turntable / swivel arm Test and spray accessories as shown in the pictures Operating manual / documentation Accessories and components as shown in the pictures Condition: Used Optical condition see pictures Scope of delivery as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale We will be happy to answer any further questions by telephone.

Condition: used, WEISS Weiss WK3-1000/70 climate testing chamber with temperature and humidity control – 990 liters – -70 to +180 °C Weiss WK3-1000/70 Air-cooled climate and temperature testing chamber with touch panel, 990 liters test chamber volume, and a temperature range of -70 to +180 °C For sale is a Weiss climate testing chamber, type WK3-1000/70, with temperature and humidity control. The unit is suitable for temperature and climate testing of components, assemblies, and industrial products. The integrated touch panel allows for setting and monitoring temperature, humidity, and test programs. Technical data: Manufacturer: Weiss Type: WK3-1000/70 Product type: Climate and temperature testing chamber Serial number: 59226115080010 Test chamber volume: approx. 990 liters Cooling: Air-cooled Operation: Touch panel Weight: approx. 955 kg Test chamber dimensions: Height: 950 mm Hjdpfxo Aghkuo Abasw Width: 1,100 mm Depth: 950 mm External dimensions: Height: approx. 2,000 mm Width: 1,415 mm Depth: 2,105 mm Data for temperature testing: Temperature range: -70 to +180 °C Heating rate: approx. 4.0 K/min Cooling rate: approx. 2.5 K/min Data for climate testing: Temperature range: +10 to +95 °C Humidity range: 10 to 98 % relative humidity Electrical data: Rated voltage: 3/N/PE AC 400 V ± 10 % Mains frequency: 50 Hz Rated current: 29 A Rated power: 13.8 kW Refrigerant: R404A: 4.6 kg R23: 1.2 kg Equipment: Touch panel for operation and program control Test chamber made of stainless steel Viewing window with lighting Air circulation system with fans Insert shelf Side openings: approx. 50 mm and 130 mm Communication interfaces Testing: The climate testing chamber has been tested. Heating, cooling, and humidity functions have been checked. Scope of delivery: 1 × Weiss WK3-1000/70 climate testing chamber with integrated equipment and insert shelf Scope of delivery as shown in the pictures. Condition: Used The unit has been tested. Condition and scope of delivery, see pictures. Tools, machines, and other items not explicitly mentioned are not part of the sale. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Weiss Type: WT 5.1'/ Mini-SHED for diurnal loss measurements Test chamber dimensions: Width 1600 mm x Depth 2140 mm x Height 2150 (usable 1600) mm Housing dimensions: Width 1760 mm x Depth 3100 mm x Height 2790 mm Maximum floor load: 250 kg Operating temperature range: +18 °C ... +45 °C (at higher temperatures, SHED operation is only possible without a Tedlar bag) Hjdezd Slkepfx Abaow Temperature range: +18 °C ... +45 °C Temperature stability: ≤ ±1 K (over time) Temperature change rate (heating and cooling): approx. 0.5 K/min, without test specimen Channel connection (air inlet and outlet): ∅ 80 mm, in the rear wall of the chamber Shut-off valve, gas-tight (air inlet and outlet): ∅ 80 mm, gas-tight, pneumatic operation. Delivery scope: Connection flange of the shut-off valve Cooling water consumption: approx. 0.8 m3/h Voltage: 230/400 V; 3 phases + N + PE; 50 Hz Rated power: 4.1 kW Rated current: 14.0 A Weight: approx. 2500 kg Type: WT 5.1'/ Condition: used Sale from current location Scope of delivery: (Only the Weiss emissions test chamber WT 5.1' + Mini-SHED) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, Hedpfx Ajyi Ezkebajw - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), - Plate conveyors and control panels. The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.

Condition: used, WEISS TECHNIK Climate testing chamber / Temperature testing chamber / Climate chamber Weiss Umwelttechnik WK-180/70/5 Temperature range -70 °C to +180 °C Test chamber volume approx. 190 liters Water-cooled – Temperature and humidity testing system For sale is a used climate testing chamber from the manufacturer Weiss Umwelttechnik GmbH, model WK-180/70/5. The climate testing chamber was developed for carrying out temperature and climate tests. It is suitable for the testing of materials, components and electronic parts under different temperature and humidity conditions. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Model: WK-180/70/5 Type of equipment: Climate testing chamber / Temperature testing chamber Design: water-cooled Test chamber volume: approx. 190 liters Country of manufacture: Germany Temperature data: Temperature range: -70 °C to +180 °C Temperature change rate according to the manufacturer: Heating: approx. 7.5 K/min Cooling: approx. 7.5 K/min Climate data according to the manufacturer for the WK series: Climate temperature range: +10 °C to +95 °C Relative humidity: 10 % to 95 % r.h. Humidity control for climate tests Hodpj Abbidefx Abaow The specifications for the temperature change rates and the climate range are the manufacturer's stated values. The actual performance depends on the operating and test conditions. Refrigerant circuit: Refrigerant 1: R404A Fill quantity: 2.50 kg Max. low pressure: 19 bar g Max. high pressure: 25 bar g Refrigerant 2: R23 Fill quantity: 0.75 kg Max. low pressure: 19 bar g Max. high pressure: 25 bar g Standby pressure: 13 bar g Refrigerant and fill quantities according to the nameplate. An up-to-date leak test certificate is not included in the available documentation. Electrical data: Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 21 A Test chamber: Test chamber volume: approx. 190 liters Internal dimensions (W × D × H): approx. 580 × 450 × 750 mm Test chamber with viewing window Metallic shelves / grid trays Test specimen feed-throughs Dimensions / Transport: External dimensions (W × D × H): approx. 870 × 1,285 × 1,775 mm Weight: approx. 460 kg Dimensions according to the manufacturer's drawing. Weight according to the manufacturer's specifications without options. Actual dimensions and weight may vary depending on the equipment. Equipment: Climate testing chamber with temperature and humidity control Water-cooled cooling system Electronic temperature control S!MCON / 32 control unit of the series External control panel Viewing window Test chamber lighting Metallic shelves Lateral test specimen feed-through Multi-stage refrigeration system Electrical power connection Industrial housing with adjustable feet Equipment according to the pictures Application areas: Temperature tests Climate tests Environmental simulation Material testing Electronics and component testing Aging and stress tests Quality assurance Research and development Product and component testing Workshop inspection from 15.10.2026: Measured temperature change Heating: approx. 9.7 K/min Measured temperature change Cooling: approx. 12.1 K/min Condition & Notes: Used Optical condition according to the pictures Scope of supply: 1 × Weiss Technik WK-180/70/5 climate testing chamber External control panel Existing shelves Existing connection components Otherwise, scope of supply as shown in the pictures. Collection or shipping by forwarding agent possible by arrangement. Loa

Condition: used, WEISS TECHNIK Salt Spray Test Chamber / Corrosion Test Chamber SC 1000 Professional salt spray test chamber for corrosion, salt spray, and condensation tests For sale is a used salt spray test chamber from the manufacturer Weiss Umwelttechnik GmbH. The system is suitable for professional corrosion tests, salt spray tests, and condensation tests in laboratories, the automotive industry, research, and quality assurance. Equipped with a color touch panel, Ethernet interface, and a test chamber volume of approximately 950 liters. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Model: SC 1000 Year of manufacture: 2015 Test chamber volume: approx. 950 liters Supply: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.6 kW Rated current: 11.3 A Compressed air: 4–10 bar (max. 10 bar) Deionized water: 3–5 bar Control: Programmable color touch control Ethernet network interface RS232 interface Dimensions: External dimensions (W × D × H): approx. 2,730 × 800 × 1,370 mm Test chamber dimensions (W × D × H): approx. 1,560 × 570 × 1,190 mm Test chamber volume: approx. 950 liters Weight: Tare weight (without brine): approx. 220 kg Equipment: 950-liter test chamber Color touch panel Ethernet interface RS232 interface Programmable control Salt spray testing Condensation testing Heated compressed air humidifier Integrated brine tank Compressed air connection Deionized water Exhaust connection Application areas: Corrosion testing Salt spray tests Condensation tests Material testing Coating testing Paint testing Automotive industry Quality assurance Testing laboratory Research and development Scope of supply: Weiss Technik SC 1000 Accessories as shown in the pictures Condition: Hjdpfx Abezlgyreaow Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. The table shown in the photos and other items not explicitly mentioned are not included in the sale. Shipping by freight forwarder is possible. Subject to change, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Weiss Climate chamber / Temperature and humidity chamber Weiss WK3-340/70 Climate chamber Temperature range from -70 °C to +180 °C with humidity control Approx. 335 liters / 10 to 98 % RH / air-cooled For sale is a used climate chamber from the manufacturer Weiss Umwelttechnik GmbH. The climate chamber is suitable for temperature and humidity testing, environmental simulation, material testing, quality assurance, electronics and component testing as well as development, aging and stress tests. The unit features a programmable touch panel control, temperature and humidity control, a large observation window and lateral test specimen ports. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: WK3-340/70 Device type: Climate chamber / Temperature and humidity chamber Test chamber volume: approx. 335 liters Temperature range: -70 °C to +180 °C Temperature change rate cooling: approx. 3 K/min Temperature change rate heating: approx. 3 K/min Temperature deviation over time: ±0.1 to ±0.5 K Temperature homogeneity spatially: ±0.5 to ±1.5 K Climate range temperature: +10 °C to +95 °C Dew point range: -3 °C to +94 °C Humidity range: 10 to 98 % RH Temperature deviation over time in climate operation: ±0.1 to ±0.3 K Temperature homogeneity spatially in climate operation: ±0.5 to ±1 K Humidity deviation over time: ±1 to ±3 % RH Refrigerant 1: R404A Refrigerant quantity: 2.5 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Refrigerant 2: R23 Refrigerant quantity: 0.55 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Standby pressure: 13 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 5.5 kW Rated current: 16 A Dimensions and weight: Test chamber volume: approx. 335 liters Internal dimensions (H × W × D): approx. 750 × 580 × 765 mm External dimensions (H × W × D): approx. 1,775 × 870 × 1,600 mm Weight: approx. 585 kg Equipment: Programmable touch panel control Temperature control Humidity control Air-cooled design Stainless steel interior Large observation window Hjdpfoz A A T Hox Abaew Test chamber lighting Lateral test specimen ports Adjustable feet Program and manual operation Test specimen port right: DN 125 mm Test specimen port left: DN 50 mm Stainless steel inserts as shown in the pictures Areas of application: Temperature testing Climate testing Humidity testing Environmental simulation Material testing Electronics testing Component testing Assembly testing Quality assurance Research and development Lifetime testing Aging and stress tests Condition: Used Optical condition as shown in the pictures Scope of delivery: 1x Weiss WK3-340/70 Climate chamber Touch panel control Stainless steel inserts as shown in the pictures Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered test and climate systems in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Weiss Type: WT3-600/70/5 Weiss temperature testing cabinet WT3-600/70/5 water-cooled version with S!MCON / 32 control system and touch panel Control panel "Touch Panel" By simply touching the function symbols on the "Touch Panel" control panel, all control and operating commands can be activated. Adjustable feet To compensate for uneven floors and to ensure sufficient ventilation of the machine, the testing cabinet is equipped with adjustable feet. Feedthroughs The testing cabinet is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be routed into the test chamber. Feedthroughs installed as standard: R1: DN 125 mm L1: DN 50 mm Test chamber volume: approx. 600 liters External dimensions including hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions excluding hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Data for temperature tests: Temperature range: -70 °C to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5): Heating: 7.5 K/min Cooling: 7.5 K/min Maximum heat compensation: 2500 W Data for operation: Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: approx. 23 A Rated power: approx. 13 kW On-site fuse protection: 16 A slow-blow Sound pressure level: Measured at a distance of 1 m in front / 1 m height: approx. 58 dB(A) Refrigerant: R-404A / R23 Weight: approx. 620 kg Hedoy Nibpspfx Abaew For your safety as a buyer, here is the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Hjdozd Ultopfx Abaew Type: SB2/500/80 Water-cooled climate testing chamber Cold-heat operation: -75°C ... +180°C Climate operation: +10...+95°C Humidity range: 10...98 % RH Temperature stability, over time: ± 0.2K Humidity stability: ±1 % RH Temperature change rate: Cooling: approx. 1.4 K/min Heating: approx. 2.5 K/min External dimensions: Height 1980 mm, Width 1265 mm, Depth 1365 mm Connections: Left side: ∅ 100 mm Right side: ∅ 50 mm The connection voltage is: 400V/3Ph+N+PE/50 Hz Power: 10.4 kVA Weight: approx. 720 kg Refrigerant: R404a / R23 For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Weiss Type: WK1-1000/70 Weiss Climate Test Chamber, Water-Cooled (Refrigerant converted to R-452A) Control Panel “Touch Panel” All control and operating commands can be initiated on the “Touch Panel” control panel by simply touching the function symbols. Feedthroughs The test chamber is equipped with feedthroughs on the right and left sides. These allow measurement cables and testing equipment to be placed in the test chamber. Feedthroughs: 1 feedthrough, ∅ 125 mm, installed on the right 1 feedthrough, ∅ 50 mm, installed on the left Volume: 990 liters Test chamber dimensions: Test chamber: Width 1100 mm, Depth 950 mm, Height 950 mm Housing: Width 1385 mm, Depth 1850 mm, Height 1980 mm Data for temperature tests: Minimum temperature: -70 °C Maximum temperature: +180 °C Temperature deviation, temporal: ± 0.1 to ± 0.5 K Temperature homogeneity, spatial: ± 0.5 to ± 2 K Temperature change rate, heating: 4 K/min Temperature change rate, cooling: 2.5 K/min Max. heat compensation: 2750 W Data for climate tests: Temperature range: +10°C to +95°C Humidity range: 10 to 98% RH Temperature deviation, temporal: ± 0.1 to ± 0.3 K Temperature homogeneity, spatial: ± 0.5 to ± 1 K Humidity deviation, temporal: ± 1 to ± 3% RH Data for operation: Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Nominal current: 29A, Nominal power: 19.8 kW Refrigerant: R-452A / R23 Weight: approx. 910 kg Hodozgbtpopfx Abaow For your safety as a buyer, here is the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Weiss Type: WT3-600/40 Weiss temperature testing chamber with S!MCON / 32 control system, water-cooled Control panel »Touchpanel« All control and operating commands can be initiated on the »Touchpanel« control panel by simply touching the function symbols. Adjustable feet To compensate for uneven floors and to ensure adequate ventilation of the machine, the testing chamber is equipped with adjustable feet. Feedthroughs The testing chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be routed into the test chamber. Feedthroughs installed as standard R1: NW 125 mm L1: NW 50 mm (Refrigerant converted to R-452A) Test chamber volume: approx. 600 liters External dimensions with hinges and door lock Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock Height 1995 mm, Width 1000 mm, Depth 1660 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Data for temperature tests: Temperature range: -42 to +180 °C Temporal temperature deviation in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5) Heating: 4.0 K/min Cooling: 3.0 K/min Maximum heat compensation: 2500 W Data for operation: Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A, Rated power 7.8 kW Fuse: 16 A slow-blow (supplied by customer) Hjdpfx Absziyb Reaew Sound pressure level approx. measured at a distance of 1 m from the front, 1 m height: 58 dB(A) Refrigerant: R-452A Weight: 620 kg For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Weiss   Type: WK3-340/70   Weiss Climate Testing Chamber, Air-Cooled   Control Panel »Touch Panel« All control and operating commands can be initiated by simply touching the function symbols on the »Touch Panel« control panel.   Adjustable Feet To compensate for uneven floors and ensure sufficient ventilation of the machine section, the testing chamber is equipped with adjustable feet.   Feedthroughs The testing chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be routed into the test chamber.   Feedthrough installed as standard R1: 125 mm L1: 85 mm   Volume: 335 liters   Test chamber dimensions:   Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm   Data for temperature tests:   Minimum temperature -72°C Maximum temperature +180°C   Temperature deviation, over time ± 0.1 to ± 0.5 K Temperature homogeneity, spatially ± 0.5 to ± 1.5 K   Temperature change rate, cooling 3 K/min Temperature change rate, heating 3 K/min   Data for climate tests:   Temperature range +10°C to +95°C Dew point range -3°C to +94°C Hedpfx Abeziiwuoajw Humidity range 10 to 98% RH   Temperature deviation, over time ± 0.1 to ± 0.3 K Temperature homogeneity, spatially ± 0.5 to ± 1 K Humidity deviation, over time ± 1 to ± 3% RH   Data for operation:   Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 16 A Rated power 4.9 kW Fuse, to be provided by the customer: 16 A slow-blow   Refrigerant: R-452A/R23   Weight Approx. 585 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data, specifications are subject to change!)   We will be happy to answer any further questions you may have over the phone.

Condition: used, Weiss   Type: WK3 600/0-M   Weiss Climate Test Chamber, Water-Cooled Type series WK3-../0 with SIMPAC* control system   Test chamber volume: approx. 600 liters   Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm   Data for operation:   Test chamber lighting: LED 24 V, 6.8 W / Halogen bulb 2 x 24V, 50W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Fuse (on customer's side): 16 A, slow-blow Protection class, control cabinet and operating panel: IP 54 Max. heat dissipation to environment: 1200 W   Sound pressure level approx. Hedpfx Aoziywrsbaew measured at a distance of 1 m from the front, 1.6 m high: 46 dB(A)   Data for temperature tests: Temperature range: -5°C to +90°C   Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1 K   Temperature gradient (according to IEC 60068-3-5) Temperature change rate Heating: 0.6 K/min Cooling: 0.3 K/min   Heat compensation at +20 °C to +50 °C: 200 W   Data for climate tests:   Temperature range: +10°C to +90°C Dew point range: 4 to +89.5 °C Humidity range: 10 to 98 % RH Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.3 K Temperature deviation spatially: ± 0.5 to ± 1 K Humidity deviation over time: +1 to +3 % RH   Refrigerant: R-404A   Weight: 610 kg   For your security as a buyer, please note the following information!   The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers will be subjected to a test run, which will be monitored with calibrated equipment.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by telephone.

Condition: used, Weiss Type: WK11 - 600/70/5 Weiss Climate Chamber, Water-Cooled The Weiss climate chamber WK11-600/70/5, with an approximate usable volume of 600 liters, is suitable for temperature and humidity testing as well as for conditioning samples and materials in the range of -70 °C to +180 °C. Simcon/32 - Net Controller Technical Data: Test chamber designation: WK11-600/70/5 External dimensions with hinges and door closure: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door closure: Height 1995 mm, Width 1000 mm, Depth 800 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Connections: 2x R1 NW 125 mm ∅ 1x L1 NW 50 mm ∅ Test chamber volume: approx. 600 liters Data for temperature tests: Temperature range -70 °C to 180 °C Temporal temperature deviations in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviations: ± 0.5 to ± 2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 6 K/min Cooling: 6 K/min Hodozimg Hopfx Abajw Thermal compensation: at +20 °C: 5000 W at -20 °C: 5000 W Data for climate tests: Temperature range +10 to +95 °C Humidity range 10 to 98 % RH Temporal temperature deviations in the center of the usable space: ± 0.1 to ± 0.3 K Spatial temperature deviations: ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Temporal humidity fluctuation in the center of the usable space: ± 1 to ± 3 % RH Thermal compensation: 500 W 3/N/PE AC 400V ±10% 50Hz Rated power: 16.5 kW Rated current: 29 A Fuse on customer side: 32 A slow-blow Permissible weight of test specimen: Total load of the shelf supports: 80 kg Test chamber floor: 80 kg, insert shelf: 40 kg Weight: 675 kg Refrigerant: R452A / R23 Important note: "The table shown in the photos is not included in the sale." For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Type: EmissionEvent VOC/240 Hjdpfsziyz Rsx Abasw Weiss Technik EmissionEvent VOC/240 Industrial emission test chamber / VOC test chamber / climate test chamber Water-cooled For sale is a professional emission test chamber: Weiss Technik EmissionEvent VOC/240 (year of manufacture 2018) from an industrial laboratory and testing facility. The device is used to perform emission tests in accordance with standards under precisely controlled temperature, climate and process conditions and is designed for continuous use in laboratories, industry and quality assurance. What does VOC mean / What does the device do? VOC = Volatile Organic Compounds The device measures and tests the outgassing (emission) of materials under defined conditions. This involves examining which substances a material releases into the air. Typical applications: Emission testing of plastics, components, materials Automotive interior material tests (odor / pollutants) Building products & furniture emissions Packaging, textiles, adhesives, paints Quality control and standard tests (e.g. ISO / VDA / DIN) The test system generates precisely defined temperature, humidity and air conditions. Emissions are passed from the test chamber via a carrier gas (e.g. nitrogen or air) and can then be measured with analysis devices. Device function / features: Stainless steel emission test chamber (hermetically sealed) Temperature and climate control Carrier gas system for emission measurements Automatic process control with touch panel Program operation / continuous operation possible Sampling connections for VOC analysis Industrial design (laboratory & continuous operation) Data for temperature tests: Temperature range +20 to +130 °C Temporal temperature deviation in the center of the usable space ± 0.1 to ± 0.3 K Spatial temperature homogeneity ± 0.1 to ± 0.5 K Temperature change rate (according to IEC 60068-3-5) Heating 0.4 K/min Cooling 0.3 K/min Temperature change rate (on average, with increased heating and cooling capacity) Heating up to +65 °C 1.5 K/min Cooling from +65 °C to +20 °C 1.3 K/min Data for climate tests: Temperature range +20 to +130 °C Dew point range +5 to +60 °C Humidity range 5 to 95 % RH Temporal temperature deviation 0.1 to 0.3 K Temporal humidity deviation -3 to 3 % RH Dimensions EmissionEvent VOC/240 External dimensions (device) Width: approx. 1350 mm, Depth: approx. 2500 mm, Height: approx. 1985 (2190) mm Internal dimensions (test chamber) Emission test chamber: 200 l Test chamber gross: 240 l Test chamber net: 208 l Max. test specimen: 80 kg Internal dimension VOC/240 Width: approx. 600 mm, Depth: approx. 560 mm, Height: approx. 600 mm Electrical: Voltage: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 12.1 kW Rated current: 30 A Protection class: IP54 Refrigerant R134a – 2.5 kg Weight: approx. 1080 kg For your security as a buyer, the following information! The following points will be carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions for you by telephone.