Used Weiss Wm250 for sale (125)

Condition: new, Center length ----- 500 mm Center height ----- 125 mm Turning diameter above bed ----- 250 mm Turning diameter above slide ----- 150 mm Spindle intake ----- MK4 Passage of main spindle ----- 26 mm Bed width ----- 140 mm Spindle speed ----- 80-1600 rpm Loose head ----- MK3 Motor ----- 750W Dwodpfx Aopz Iy Aedujf Lathe equipped with automatic longitudinal and transverse feeding Includes: lower case, 3-jaw chuck, 4-jaw chuck, chuck, fixed goggles, moving goggles, CE shield

Condition: excellent (used), Weiss Type: WKL 64/40 For sale is a professional Weiss climate chamber. Air-cooled -40°C to 180°C with humidity range from 10% to 98% Chamber volume: 64 liters Internal dimensions: Height 400 mm, Width 470 mm, Depth 345 mm External dimensions: Height 1,780 mm, Width 760 mm, Depth 800 mm Temperature change rate: Cooling: 5.0 K/min Heating: 3.5 K/min Temporal temperature fluctuation: ±0.3 K to ±1.0 K Temperature uniformity within chamber: ±0.5 K to ±2.0 K Max. heat compensation: 800 W Climate testing Maximum temperature: +95°C Minimum temperature: +10°C Dew point temperature range: 5.5 ... 93.5°C Humidity range: 10 ... 95 % r.h. Humidity stability (steady state, depending on set value): ±1 to ±3 % r.h. Temporal temperature deviation (steady state, depending on set value): ±0.3 K to ±0.5 K Temperature uniformity within chamber (depending on set value): ±0.5 K to ±1.5 K Rated power: 1.8 kW; Rated current: 8.0 A Power supply: 1/N/PE AC 230V ±10% / 50Hz Refrigerant: R-404A, 0.8 kg Weight: 120 kg Important note: "The table shown in the photos is not included in the sale." For your safety as a buyer, please note the following information: The following tasks are carried out on our offered chambers prior to sale: 1. Functional inspection and replacement of necessary components 2. Recharging with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run, monitored with calibrated equipment. Dwsdpfx Aox Ek Uvsduef Condition: used Scope of delivery: (See picture) (Specifications and technical information subject to change and error!) Should you have any further questions, we are happy to assist you by phone.

Condition: ready for operation (used), WEISS 168928B-002 spindle, used, with normal signs of wear, 100% functional, delivery contents as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Dwedpsx Evbnjfx Adusf

Year of construction: 2015, condition: ready for operation (used), Main Drive Spindle motor power 7.5 KW Tool taper 60 Dsdpsx D Hiwsfx Aduswf Additional Equipment Festool gripper arms Prism table (prisms are adjustable in length) This WEISS Rundschleiftechnik K52 grinding machine was manufactured in 2015. It features a robust MK4 center size, can handle workpieces up to 650cm, and has a center height of 180mm. The grinding wheel diameter is 500mm, and it includes a Marposs measuring device and an Eckelmann Enc 66 control unit. Consider the opportunity to buy this WEISS Rundschleiftechnik K52 grinding machine. Machine was general overhaul in 2023. Contact us for further details regarding this machine. Application Types Grinding

Condition: good (used), Year of construction: 2010, Rotary table Fabr.WEISS Type: TC 220T Year: 2010. Dsdpfx Adexr Dh Hsuswf

Condition: excellent (used), CATALOGUE NUMBER 6907 TECHNICAL DATA - Loading hopper inlet at the top: 1980x1050mm - Loading hopper inlet at the bottom: 980x1050mm - Discharge for shredded wood: diameter 210mm - Rotor working width: 980mm - Main motor: 30kW - Pump motor: 1.1kW - Number of knives: 36 pcs - Knife size: 40x40mm - Screen: 18mm - Pusher drawer - Electric auto-reverse - Dimensions (L/W/H): 2100x2030x2070mm - Weight: approx. 3500kg – French-made – Similar to WEIMA WL 10 – New knives installed – Auto-reverse – Pusher drawer – Very good condition – Used shredder Net price: 88,900 PLN Net price: 2,160 EUR Net price calculated at exchange rate of 4.2 PLN/EUR Dwedskvn T Njpfx Aduef (in case of major rate fluctuations, price may change)

Condition: excellent (used), Weiss Type: WT11-1300/70/15/S Weiss Umwelttechnik Temperature Chamber WT11-1300/70/15/S 1300 litres –70°C to +180°C – 44 kW – Industrial Unit Water-cooled For sale is a professional temperature chamber from Weiss Umwelttechnik. This unit is engineered for demanding environmental simulation in industrial applications and is ideal for material testing, electronics, automotive, aerospace, and research sectors. The test chamber offers extremely rapid temperature changes and a large test volume. Technical data: Model: WT11-1300/70/15/S Test chamber volume: 1300 litres Temperature range: –70 °C to +180 °C Heating rate: up to 15 K/min Cooling rate: up to 15 K/min Temperature deviation: over time ±0.3–0.8 K / spatial ±0.5–2 K Humidity range (optional): 10–95 % rh, +10 to +95 °C Sound pressure level: approx. 73 dB(A) Electrical data: Voltage: 3/N/PE AC 400 V ±10 % Rated power: 44 kW Rated current: 63 A Refrigerants: R404A (14.0 kg) R23 (5.4 kg) Pressure stages: ND 18 bar / LP 19 bar / HD 25 bar External dimensions: Overall width: approx. 3,200 mm Overall depth: approx. 2,125 mm (1,385 mm housing + 740 mm door area / radius when open) Overall height: approx. 2,020 mm Internal dimensions – test area: Inside width: approx. 1,000 mm Inside depth: approx. 1,060 mm Inside height: approx. 1,230 mm Equipment: Test chamber made from stainless steel 1.4301 Viewing window in the door Touch panel control Ports: R1: 125 mm L1: 50 mm Connection for automatic water top-up Chilled water inlet & outlet connections Overflow/condensate connection Safety monitoring & alarm system Ideal for: Automotive / E-Mobility Aerospace Research & Development Dedpfx Aex Eknpsdujwf Electronics testing Materials laboratory / Quality assurance Volume: 1300 litres Weight: approx. 1,900 kg For your security as a buyer, the following steps are carried out on all chambers we offer: 1. Functional test and replacement of required components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted.) Please feel free to contact us by phone for further questions.

Condition: ready for operation (used), WEISS 168928B-001 spindle, used, normal signs of wear, 100% functional, delivery contents as shown in photos. ATTENTION: Please enquire for charges for packing and transport separately! Dsdjx Dxq Tepfx Aduswf

Condition: excellent (used), CATALOGUE NUMBER: 6943 TECHNICAL DATA - Feed hopper inlet: 1600x1500mm - Rotor working width: 1500mm - Main motor: 45kW - Pump motor: 5.5kW - Number of knives: 44 pcs - Knife dimensions: 50x50mm - Screen: 59mm - Pusher drawer Dwjdolnkxwspfx Adujf - Auto-reverse - Dimensions (L/W/H): 3430x2800x2850mm - Weight: approx. 9000kg ADVANTAGES – French manufacture - New knives installed – Auto-reverse – Pusher drawer – Very good condition – Used shredder Net price: 159,900 PLN Net price: 38,070 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Weiss Model: WK3 600/0-M Weiss Climate Test Chamber, Water-Cooled Series: WK3-../0 with SIMPAC* Controller Test chamber volume: approx. 600 liters Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm Operating data: Test chamber lighting: LED 24 V, 6.8 W / Halogen bulb 2 x 24V, 50W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Site-provided fuse: 16 A slow-blow Control cabinet and operator panel protection class: IP 54 Maximum heat emission to environment: 1200 W Sound pressure level: Measured at a distance of 1m from the front, at a height of 1.6m: 46 dB(A) Data for temperature tests: Temperature range: -5°C to +90°C Djdjx Ag R Sspfx Adujwf Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Temperature gradient (according to IEC 60068-3-5) Temperature change rate: Heating 0.6 K/min Cooling 0.3 K/min Heat compensation at +20°C to +50°C: 200 W Data for climatic tests: Temperature range: +10°C to +90°C Dew point range: 4 to +89.5°C Humidity range: 10 to 98 % r.h. Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity deviation: +1 to +3 % r.h. Refrigerant: R-404A Weight: 610 kg For your safety as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functionality check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Technical data and information subject to change and errors!) We are happy to answer any further questions you may have by phone.

Condition: ready for operation (used), Weiss 175487A motor grinding spindle SN 175487A-0036 with Indramat connector, used, normal signs of wear, 100% functional, delivery as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Dodex Dwiuepfx Aduewf

Condition: excellent (used), Weiss Type: SWT 1000 – IPX9K Weiss Spray and Splash Water Test Chamber Description: Offered for sale is a WaterEvent SWT 1000 test chamber from Weiss Technik – ideal for standardized testing of enclosure or component water ingress protection (IP) classes. With optional features, testing according to IPX9K (high-pressure/steam jet), ISO 20653, and additional standards is possible. High-pressure/steam jet nozzles for IPX9K Jet nozzles for IPX5/6, among others, compliant with standards: ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Possible Protection Classes & Tests Depending on configuration, the SWT system covers a wide range of tests: Standard configuration: IPX3 / IPX4 tests (spraying and splashing water from all directions). Optionally: Higher protection classes up to IPX5 / IPX6 (jetting water), and – with corresponding high-pressure configuration – up to IPX9 and IPX9K. Tests are based on standards such as DIN EN 60529 (for IP protection levels) and ISO 20653 (e.g. for vehicle or outdoor applications) – depending on intended use. Typical Applications Typical application scenarios for such a test chamber include: • Electronic devices or enclosures intended for outdoor use or humid environments, such as outdoor lighting, control housing, assemblies, panels. Dwedpfjxzprcsx Adusf • Components for vehicles or machines, especially those exposed to rain, splashing water, or high-pressure cleaning (e.g., construction machinery, e-bike or vehicle parts). • Batteries or electrical components requiring water ingress protection testing – e.g., automotive industry or e-mobility applications. Technical Data: Applicable protection classes: IPX3 / IPX4 Oscillating tube radius (for IPX3/4 tests): standard 200 mm (for SWT 1000), optionally up to 400 mm. Test chamber (interior): Internal dimensions: approx. 1,000 × 1,015 × 1,000 mm (W × H × D) Operation / Control: Web panel or GUI for test programming and control. Condition: used Scope of supply: (see photo) (Data subject to change and correction. Technical specifications may be updated without notice.) Further questions welcomed by phone.

Condition: excellent (used), Weiss Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet This equipment tests the ingress of water into housings. In conjunction with a timer, the test cycle can be automated for an adjustable test duration from 3 seconds up to 30 hours. According to DIN VDE 0470 T1 and EN 60529 for testing protection ratings IPX3 and IPX4. Thanks to the integrated recirculation system, water consumption can be minimized. Features: - Glass door with wiper - Pneumatic drive for the oscillating tube - Adjustable oscillation angle - Interchangeable oscillating tubes - Swivel and exchangeable nozzle holders - Adjustable and monitored water flow rate - Test duration control Djdpfx Aoxxuytjduewf Mechanical Load Data: - Max. load with test object (evenly distributed over area) - Permissible test load weight for carrying rack (total): 25 kg - Spray radius: 200 mm / 400 mm Test Data for IP Protection Ratings: - Oscillation speed: approx. 60°/s - Oscillation angle for IPX3: approx. ±60° - Oscillation angle for IPX4: approx. ±180° to -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating Data: - Voltage: 3/N/PE AC 400V ±10% 50 Hz - Rated power: 1.5 kW - Rated current: 5.0 A - Weight: 375 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), White Type: WT3-1000/40 Weiss Temperature test chamber With S!MCON / 32 control unit Water-cooled Touch panel" control unit All control and operating commands can be triggered by simply touching the function icons on the all control and operating commands by simply touching the function icons. Levelling feet To compensate for uneven floors and to ensure adequate ventilation of the machine part, the test chamber is equipped with adjustable feet. Feed-throughs The test chamber is equipped with feed-throughs on the right and left side. Measuring cables and test equipment can be routed through these into the test chamber. Feed-through built into basic equipment R1: NW 125 mm Dwjdsthhw Ajpfx Adujf L1: NW 50 mm Test chamber capacity: approx. 990 liters Test chamber dimensions: Height 950 mm, width 1100 mm, depth 950 mm External dimensions: Height 2000 mm, width 1415 mm, depth 2105 mm Data for temperature tests: Temperature range: -40 to +180 °C Temperature deviation in time in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate Heating: 4.0 K/min Cooling: 3.0 K/min Heat compensation max. 4500 W Data for operation: Test room lighting Halogen bulb 2x 24V, 50W Nominal voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 22.0 A Rated power 11.5 kW On-site fuse 32 A slow-blow Sound pressure level approx. measured at a distance of 1 m from the front. 1m height 56 dB(A) Refrigerant: R-404A Weight: 840 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), White Type: Walk-in climate simulation cell WK 50 / 40-120 Technical data climatic chamber: Temperature range -40...+120 °C Temperature tolerance: +/- 0.5°C Temperature change rate: 1 K/min Humidity range 15...approx. 95 % r.h. Humidity tolerance +/- 5.0 % r.h. Dimensions: Test room volume: 50m³ External dimensions (WxDxH) approx. 4800mm X 6100mm X 2640mm Test chamber (WxDxH) approx. 4500mm Χ 5000mm Χ 2200mm Door opening (WxH) approx. 3000mm X 2200mm Dedpeuvi R Aefx Aduswf Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), White Type: WKL 34/60 Weiss air-cooled climate chamber Refrigerant converted to R-452A -60°C to 150°C Room volume: 34 liters Entry port installed in basic equipment: R1 NW 50 mm L1NW 120 mm Internal dimensions: Height 310 mm Width 324 mm Depth 300 mmm External dimensions: Height 1740 mm Width 630 mm Depth 970 mmm Characteristic values for temperature tests: Temperature range -60 to +150 °C Temperature differences in steady state, according to IEC 60068-3-5) Temperature fluctuation over time in the center of the usable space ± 0.3 to ± 1 K ± 1 to ± 2 K Temperature deviation in space (corresponds to temperature gradient) 2 to 4 Temperature change rate (according to IEC 60068-3-5) Heating 2.5 K/min Cooling 3 K/min Heat compensation max. 550 W Characteristic values for climate tests: Temperature range +10 to +95 °C Humidity range 10 to 98 %r.H. Temperature and humidity differences (in steady state, according to IEC 60068-3-5) Temperature fluctuation over time in the center of the usable space ± 0.3 to ± 0.5 K Temperature deviation in space ± 0.5 to ± 1.5 (corresponds to temperature gradient) 1 to 3 Humidity fluctuation over time in the center of the usable space ± 3 to ± 5 %RH Data for operation: Test room lighting Halogen bulb 12V, 20W Nominal voltage 1/N / PE AC 230 V ± 10 % 50 Hz Dwsdetr Dinopfx Aduef Rated power 2.5 kW Rated current 11 A On-site fuse 16A slow-blow Heat dissipation air-cooled test chambers Max. Heat dissipation to surroundings 1700 W Refrigerant: R-452A / R23 Weight: 140 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), White Type: SC/KWT 450 Salt spray chamber Technical data: Test chamber capacity 450 liters Max. load 100 kg Brine storage tank 180 liters External dimensions: Height 920 mm Width 1930 mm Depth 800 mm Test compartment dimensions: Height 740 mm Width 850 mm Depth 570 mm Areas of application: Corrosion tests: Salt spray test: room temp. up to + 50°C Condensation water test: Room temp. up to + 45°C Humidifier +75°C Dwedpjudvg Refx Adusf Temperature constancy The temperature deviation over time is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power 2.0 kW Rated current 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Weight: 180 kg Condition: second-hand / used Scope of delivery: (see picture) (We reserve the right to make changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Weiss Type: SC/KWT 450 Salt Spray Chamber Technical Data: Test chamber volume: 450 liters Maximum load: 100 kg Brine reservoir: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Applications: Corrosion tests: Salt spray test: Ambient temperature up to +50°C Condensation water test: Ambient temperature up to +45°C Humidifier +75°C Temperature stability The temporal temperature deviation is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.0 kW Rated current: 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Standard climate (ventilation): DIN 50014 Weight: 180 kg Dwjdpfsw Hz Trjx Aduef Condition: used Scope of delivery: (See picture) (Subject to technical modifications and errors! All provided data are subject to change!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Type: WK3-340/70 Weiss Climate Test Chamber, Water-Cooled Control Unit: “Touch Panel” All control and operating commands can be triggered simply by touching the function symbols on the “Touch Panel” control unit. Adjustable Feet The test chamber is equipped with adjustable feet to compensate for uneven floors and to ensure sufficient ventilation of the machine section. Feed-Throughs The test chamber is fitted with feed-throughs on both the left and right sides. These allow measuring cables and test devices to be routed into the test chamber. Feed-throughs included in the basic configuration: R1: nominal width 125 mm L1: nominal width 85 mm Volume: 335 liters Dwsdpsxmg Sdofx Aduof Test Chamber Internal Dimensions: Height: 750 mm, Width: 580 mm, Depth: 765 mm External Dimensions: Height: 1775 mm, Width: 870 mm, Depth: 1600 mm Specifications for Temperature Tests: Minimum temperature: –72°C Maximum temperature: +180°C Temperature deviation over time: ± 0.1 to ± 0.5 K Temperature uniformity spatially: ± 0.5 to ± 1.5 K Temperature change rate, cooling: 3 K/min Temperature change rate, heating: 3 K/min Specifications for Climate Tests: Temperature range: +10°C to +95°C Dew point range: –3°C to +94°C Humidity range: 10 to 98% RH Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature uniformity spatially: ± 0.5 to ± 1 K Humidity deviation over time: ± 1 to ± 3% RH Operating Data: Test chamber lighting: Halogen bulb 2 x 24V, 50W Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Nominal current: 16 A Nominal power: 4.9 kW Protection: 16 A slow-blow fuse, to be provided onsite Refrigerant: R-452A/R23 Weight: approx. 585 kg For your security as a buyer, please note the following information! The following procedures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Technical data, information and specifications are subject to change and errors.) If you have any further questions, we will be happy to assist you by phone.

Condition: excellent (used), White temperature shock test chamber Here we offer a temperature shock test chamber. Weiss temperature shock test chamber air cooled ( Compressor was renewed ! ) Specification: Temperature range hot chamber +60°C ... +220°C Temperature range cold chamber -10°C ... -80°C Change hot-/cold chamber 10 s Temperature constancy ±1 K Dimensions and further data: External dimensions: Height 1990 mm Width ( without and with swivel arm ) without....ca. 1820 mm with....ca. 1915 mm Depth ( without and with test chamber door ) without....approx. 900 mm with....approx. 1155 mm Dimensions of the lifting basket ( test chamber ) height 450 mm, width 500 mm, depth 600 mm volume 130 liters Test space load max. 20 kg Test chamber floor load max. 20 kg Dwjdsk E Htyopfx Aduof Cooling water pressure min. 2 ... max. 6 bar Max. Backup fuse 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of unit approx. 65 dB(A) Cooling cascade water cooled Connected load: 3/N/PE/AC 400V ±10% 50Hz /14,0 kW nominal current 26,0 A Refrigerant R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a Weiss climate test chamber. Designation: SB2/500/80 water cooled Dwedpfx Asm Tvzcoduof Cold-heat operation: -75°C ...+180°C Climatic operation: +10...+95°C Humidity range: 10...98 % r. h. Temperature constancy, temporally ± 0.2K Humidity constancy: ±1 r.F. Temperature rate of change: Cooling: approx. 1.4 K/min Heating up: approx. 2.5 K/min External dimensions: Height 1980 mm, width 1265 mm, depth 1365 mm Feedthroughs: left side: ∅ 100 mm right side: ∅ 50 mm The connection voltage is: 400V/3Ph+N+PE/ 50 Hz Power: 10,4 kVA Weight: approx. 720 kg Refrigerant R404a / R 23 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: SB2/500/80 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a Weiss temperature chamber. Weiss temperature test chamber With S!MCON / 32 control unit Water-cooled Touch panel" control unit All control and operating commands can be triggered on the "touch panel" control unit by simply touching the all control and operating commands by simply touching the function icons. Levelling feet To compensate for uneven floors and to ensure adequate ventilation of the machine part, the test chamber is equipped with adjustable feet. Feed-throughs The test chamber is equipped with feed-throughs on the right and left side. Measuring cables and test equipment can be routed through these into the test chamber. Feed-through built into basic equipment R1: NW 125 mm L1: NW 50 mm (refrigerant converted to R-452A) Test chamber capacity: approx. 600 liters External dimensions with hinges and door lock Height 1995 mm, width 1090 mm, depth 1660 mm External dimensions without hinges and door lock Height 1995 mm, width 1000 mm, depth 1660 mm Internal dimensions: Height 950 mm, width 800 mm, depth 800 mm Dsdperak Rmefx Aduewf Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5) Heating: 4.0 K/min Cooling: 3.0 K/min Heat compensation max. 2500 W Data for operation: Test room lighting Halogen bulb 2 x 24V, 50W Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A Rated power 7.8 kW On-site fuse 16 A slow-blow Sound pressure level approx. measured at a distance of 1m from the front. 1m height 58 dB(A) Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a Weiss temperature chamber. Weiss temperature test chamber With S!MCON / 32 control Air-cooled (refrigerant converted to R-452A) Touch panel" control unit All control and operating commands can be triggered on the "touch panel" control unit by simply touching the function icons. all control and operating commands by simply touching the function icons. Levelling feet To compensate for uneven floors and to ensure adequate ventilation of the machine part, the test chamber is equipped with adjustable feet. Feed-throughs The test chamber is equipped with feed-throughs on the right and left side. Measuring cables and test equipment can be routed through these into the test chamber. Dedpfx Aorak S Djduewf Feed-through built into basic equipment R1: NW 125 mm L1: NW 50 mm Test chamber capacity: approx. 600 liters External dimensions with hinges and door lock Height 1995 mm, width 1090 mm, depth 1660 mm External dimensions without hinges and door lock Height 1995 mm, width 1000 mm, depth 1660 mm Internal dimensions: Height 950 mm, width 800 mm, depth 800 mm Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5) Heating: 4.0 K/min Cooling: 3.0 K/min Heat compensation max. 2500 W Data for operation: Test room lighting Halogen bulb 2 x 24V, 50W Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A Rated power 7.8 kW On-site fuse 16 A slow-blow Sound pressure level approx. measured at a distance of 1m from the front. 1m height 61 dB(A) Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Weiss temperature chamber Here we offer a Weiss temperature chamber. Weiss temperature chamber air cooled with Weiss condenser cooler Test chamber capacity approx. 990 liters Data for temperature tests: Temperature range -70°C to +180°C Temperature deviation in time in the center of the chamber ± 0.1 to ± 0.5 K Temperature deviation spatially ± 0.5 to ± 2.0 K Temperature gradient (acc. to IEC 60068-3-5) 1 to 4 K Temperature change rate (according to IEC 60068-3-5) Heating 5 K/min Cooling 5 K/min Heat compensation max. 2750 W Feedthrough built into basic equipment R1: NW 125 mm L1: NW 50 m Dimensions: Test chamber dimensions: Width 1100 mm x depth 950 mm x height 950 mm Housing dimensions: width 1390 mm x depth 1525 mm x height 1995 mm maximum load (evenly distributed over the surface) of the test chamber floor 150 kg per insert grate 50 kg total load of the grate supports 100 kg Data for operation: Test room lighting halogen bulb 24V, 50W Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 27,0 kW Rated current 42,02 A Heat output water-cooled test chambers max. heat output to environment 1.3 kW Noise measurement: Sound pressure level approx. 64 dB(A) Refrigerant: ( converted to R-452a ) weight: approx. 960 kg Type: WT11-1000/70/5 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. function check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Dwedpfjp Dun Aex Aduef Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), White Type: WK-340/70 Air-cooled Test chamber capacity: approx. 335 liters Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1805 mm, Width 780 mm, Depth 1700 mm Characteristics for temperature tests: Temperature range -70 to +180°C Temperature fluctuation over time: ± 0.1 to ± 0.5 K Temperature fluctuation over space: ± 0.5 to ± 2.0 K Temperature change rate for heating: 3 K/min Temperature change rate for cooling: 2 K/min Characteristics for climatic tests: Temperature range +10 to +95°C Humidity range: 10 to 98% RH Dwsdpfxjv Uap Ns Aduof Temperature fluctuation over time: ± 0.1 to ± 0.3 K spatial ± 0.5 to ± 1 K Humidity fluctuation in the center of the usable space ± 1 to ± 3% RH Electrical connection: 3/N/PE AC, 400 V ± 10%, 50 Hz Connected load: approx. 4.1 kW Rated current: 14.0 A Sound pressure level: approx. 60 dB(A) Weight: approx. 500 kg Refrigerant: R404A / R23 For your safety, please note the following information!   The following steps are carried out in advance on our chambers: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful testing, the chambers are subjected to a test run monitored by calibrated devices. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications!) We are happy to answer any further questions you may have over the phone.