Used Weiss Wm400 for sale (125)

Condition: new, Weiss W-175229B / 175229B grinding spindle SN: 175229B-0033, unused in original packaging, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Iodpfx Aoxtwctof Soik

Condition: excellent (used), Weiss Model: WK11-1000/40 For sale is a professional Weiss Umwelttechnik WT-WK 1000/40 climate test chamber with integrated Zander K-MT 2 steam humidification unit. This unit is suitable for precise temperature and humidity testing of components, assemblies, and devices. Ideal for applications in industry, development, quality assurance, and research. Weiss Climate Test Chamber, Water-Cooled Specifications for Temperature Testing: - Temperature range: -40°C to +180°C - Temporal temperature fluctuation in the center of the usable space: ±0.1 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±2.0 K Isdpfx Aox Hxkzef Seik - Rate of temperature change: * Heating: 4 K/min * Cooling: 3 K/min Specifications for Climatic Testing: - Temperature range: +10°C to +95°C - Humidity range: 10 to 98 % RH - Temporal temperature fluctuation in the center of the usable space: ±0.1 to ±0.3 K - Spatial temperature deviation: ±0.5 to ±1 K - Temporal humidity fluctuation in the center of the usable space: ±1 to ±3 % RH - Heat compensation: * In the range from +25°C to +95°C * At relative humidity up to 90%: 500 W Specifications for Humidification System: - Reservoir capacity: 20 L - Water quality: demineralized - pH value: 6 to 7 - Conductivity: 5 to 20 µS/cm3 - Water consumption at constant +40°C, 92 % RH: 21/24 h - Temperature gradient (according to IEC 60068-3-5): 1 to 2 K Test chamber dimensions: Height: 950 mm, Width: 1100 mm, Depth: 950 mm External dimensions: Height: 1980 mm, Width: 1385 mm, Depth: 1850 mm Test chamber volume: approx. 990 liters Rated voltage: 3/N / PE AC 400 V + 10% 50 Hz Rated power: 11.5 kW, Rated current: 22.0 A Refrigerant: R 404A Weight: 840 kg For your peace of mind as a buyer, please note the following information: The following actions are performed on all chambers we offer before sale: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) Should you have further questions, we are happy to answer them by phone.

Condition: used, Year of construction: 2020, operating hours: 6,875 h, machine/vehicle number: IntNr231185, EMAG WEISS cylindrical grinding machine EMAG WEISS type W11-CNC / UNIVERSAL CYLINDRICAL GRINDING MACHINE W 11-CNC SL650 Spindle hours: approx. 6,850 hours Power on hours: 20,422 hours This machine is characterized by its 2 in 1 control concept: 100% conventional cylindrical grinding or switching to 100% CNC cylindrical grinding Technical data: • Control: CNC-controlled (depending on year of manufacture Heidenhain, Siemens or Fanuc) Grinding length max. mm 650 / 1,500; in 25.5 / 59 Centre height mm 200 in 8 Grinding diameter outside mm1 / 390 in 0 / 15.5 Max. weight flying MK 4 kg 100 / lb 220.5 Max. workpiece weight between centres kg 250 /lb 551 Feed: X-axis travel mm 380 / 480 /in 15 / 19 Feed: Z-axis travel mm 1,150 / 1,650 in 45.5 / 65 Grinding wheel diameter mm 400 / 500 in 15.5 / 19.5 Rated power (100% ED) kW 9 / 11 hp 12 / 15 Peripheral speed m/s 20 - 50 Machine equipment: • Grinding wheel drive: Powerful Motor for precise grinding results • Tailstock: Adjustable tailstock for different workpiece lengths • Workpiece holder: Chuck or centering points (depending on the application) • Coolant system: Integrated, to avoid overheating and for optimal grinding results • User-friendly interface: Intuitive CNC user interface for easy programming and control • Measuring systems for real-time monitoring and quality assurance • Machine bed Cast bed Karstens base with high static-dynamic rigidity • X-axis High-precision linear guides, ball screw and glass scale • Z-axis V-flat or linear guides, ball screw and glass scale • Control Touch screen with integrated CNC control based on Windows Dialog programming, DIN programming, program memory. • Technical equipment Electrical cabinet according to VDE with CE mark • Coolant system and extraction system • Paper belt filter system with 250 | Container • Mechanical fume extraction with 1600 m²/3 with control without support foot • Measuring axis for moving to multiple diameters with wide range • Measuring head. Measuring position freely programmable. • Prepare robot interface. • Only provide 10 x l / O without interface plug software and PLC Applications: • Cylindrical external and internal machining • Precision grinding for mechanical engineering, the automotive industry and toolmaking • Production of shafts, bushings, rollers and other rotationally symmetrical workpieces Special features: • High rigidity of the machine body for vibration-free work • CNC control for complex grinding cycles and flexible processing • Adaptation to customer-specific requirements possible Optionally retrofittable Equipment: • Automated loading and unloading systems • Special mounts and special grinding wheel holders Optional grinding wheels available: • See photos The machine can be inspected by appointment. Subject to changes and errors in the technical data and information as well as prior sale! EMAG WEISS Cylindrical Grinding Machine EMAG WEISS Type W11-CNC / UNIVERSAL CIRCULAR GRINDING MACHINE W 11-CNC SL650 Spindle Hours: approximately 6,850 hours Iisdpfx Asx Hh R Dof Sek Power On Hours: 20,422 hours 2 in 1 control concept characterizes this machine: 100% conventional cylindrical grinding or switch to 100% CNC cylindrical grinding Technical data: - Control: CNC-controlled (Heidenhain, Siemens or Fanuc, depending on year of manufacture) Grinding length max. mm 650 / 1,500 ; in 25.5/59 Center height mm 200 in 8 External grinding Ø mm1 / 390 in 0 / 15.5 max. weight fl

Condition: good (used), Year of construction: 2010, Rotary table Fabr.WEISS Type: TC 220T Year: 2010. Isdpfx Aexr Dh Hof Ssik

Year of construction: 2015, condition: ready for operation (used), Main Drive Spindle motor power 7.5 KW Tool taper 60 Additional Equipment Festool gripper arms Prism table (prisms are adjustable in length) This WEISS Rundschleiftechnik K52 grinding machine was manufactured in 2015. It features a robust MK4 center size, can handle workpieces up to 650cm, and has a center height of 180mm. The grinding wheel diameter is 500mm, and it includes a Marposs measuring device and an Eckelmann Enc 66 control unit. Consider the opportunity to buy this WEISS Rundschleiftechnik K52 grinding machine. Machine was general overhaul in 2023. Contact us for further details regarding this machine. Iiodpfsx D Hiwsx Af Sek Application Types Grinding

Condition: used, Year of construction: 1980, functionality: unexamined, machine/vehicle number: GTTS 220, total height: 144 mm, total length: 135 mm, total width: 96 mm, Equipment: documentation/manual, Used Votsch/Weiss GTTS 220 Climate Chamber Manufacturer: Votsch/Weiss Model: GTTS 220 | 20 External dimensions: 135cm x 96cm x 144cm (length x width x height) Max internal dimensions: 65cm x 92cm x 54/40cm (width x depth x height) Voltage: 220/380 V Refrigerant type: R12 Iodpfx Afsx H N Dre Ssik Includes manual (installation and operation handbook)

Condition: new, Weiss 178377 grinding spindle 21kw / 7000 rpm = 0001, unused, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Iiodextwcgepfx Af Sek

Condition: excellent (used), Weiss Type: WKL 64/40 For sale is a professional Weiss climate chamber. Air-cooled -40°C to 180°C with humidity range from 10% to 98% Chamber volume: 64 liters Internal dimensions: Height 400 mm, Width 470 mm, Depth 345 mm External dimensions: Height 1,780 mm, Width 760 mm, Depth 800 mm Temperature change rate: Cooling: 5.0 K/min Heating: 3.5 K/min Temporal temperature fluctuation: ±0.3 K to ±1.0 K Temperature uniformity within chamber: ±0.5 K to ±2.0 K Max. heat compensation: 800 W Climate testing Maximum temperature: +95°C Minimum temperature: +10°C Dew point temperature range: 5.5 ... 93.5°C Humidity range: 10 ... 95 % r.h. Humidity stability (steady state, depending on set value): ±1 to ±3 % r.h. Temporal temperature deviation (steady state, depending on set value): ±0.3 K to ±0.5 K Temperature uniformity within chamber (depending on set value): ±0.5 K to ±1.5 K Rated power: 1.8 kW; Rated current: 8.0 A Power supply: 1/N/PE AC 230V ±10% / 50Hz Refrigerant: R-404A, 0.8 kg Iiodpfxjx Ek Uve Af Sjk Weight: 120 kg Important note: "The table shown in the photos is not included in the sale." For your safety as a buyer, please note the following information: The following tasks are carried out on our offered chambers prior to sale: 1. Functional inspection and replacement of necessary components 2. Recharging with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run, monitored with calibrated equipment. Condition: used Scope of delivery: (See picture) (Specifications and technical information subject to change and error!) Should you have any further questions, we are happy to assist you by phone.

Condition: excellent (used), CATALOGUE NUMBER 6907 TECHNICAL DATA - Loading hopper inlet at the top: 1980x1050mm - Loading hopper inlet at the bottom: 980x1050mm - Discharge for shredded wood: diameter 210mm - Rotor working width: 980mm - Main motor: 30kW - Pump motor: 1.1kW - Number of knives: 36 pcs - Knife size: 40x40mm - Screen: 18mm - Pusher drawer Iiedpekvn T Nofx Af Sjk - Electric auto-reverse - Dimensions (L/W/H): 2100x2030x2070mm - Weight: approx. 3500kg – French-made – Similar to WEIMA WL 10 – New knives installed – Auto-reverse – Pusher drawer – Very good condition – Used shredder Net price: 88,900 PLN Net price: 2,160 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (in case of major rate fluctuations, price may change)

Condition: good (used), Year of construction: 2008, functionality: fully functional, A used agglomerator from WEISS is being offered. Model: RL 900/2. Motors: 2 x 110 kW. Iiedpfx Afoxl Rw Uj Sok

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 59 226 035 580 030, Type: SC/KWT 450 Salt Spray Chamber Technical Data: - Test chamber volume: 450 liters - System weight: 140 kg (test chamber + machine unit; without brine and without test specimens) - Brine reservoir: 180 liters - Maximum load: 100 kg, 8 kg per support rod - External dimensions: Height without hood 920 mm, height with hood 1370 mm, width 1930 mm, depth 800 mm - Test chamber dimensions: Height 740 mm, width 850 mm, depth 570 mm - Control unit: Simcon/32 - Condition: used - Operating hours: 22,914 h Connection Data: - Voltage: 1/N/PE AC 230V ±10% 50Hz - Rated power: 2.0 kW - Rated current: 8.5 A - Power consumption: 450 Wh/h - Brine consumption: approx. 0.5–1 liter per hour - Compressed air consumption: approx. 1.5 m3/h at 0°C and 1 bar Isdpsx Ig Tmsfx Af Soik - Deionized water consumption: approx. 0.4 liters per hour Application Areas: - Salt spray test in accordance with DIN 50021 - Condensation water test in accordance with DIN 50017 - Standard climate (ventilation): DIN 50014 The system has been serviced and calibrated annually by the manufacturer, with no outstanding repairs (full maintenance contract). Last maintenance/calibration/DGUV3 inspection: 03/2025. The system will remain connected until week 3 and can be inspected during this time. All installation and operating manuals as well as the service manual are available.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, center height: 200 mm, workpiece weight (max.): 30 kg, grinding length: 400 mm, grinding wheel diameter: 350 mm, total width: 2,600 mm, total length: 1,800 mm, grinding diameter: 100 mm, workpiece weight between centers: 30,000 g, distance between centers: 400 mm, type of input current: AC, spindle speed (max.): 1,000 rpm, spindle speed (min.): 90 rpm, grinding spindle motor power: 3,700 W, grinding spindle speed: 2,000 rpm, overall weight: 2,000 kg, pivoting range: 30 °, input voltage: 400 V, Equipment: rotational speed infinitely variable, incl. swiveling internal grinding attachment General Diameter over table: 200 mm Ijdpfx Aex E U Hiof Ssik Distance between centers (ABC): 400 mm Grinding length: 400 mm Grinding diameter (max. / min. OD): 100 / 6 mm Grinding diameter (max. / min. ID): 85 / 6 mm Max. weight between centers: 30 kg Max. weight incl. chuck: 10 kg Grinding spindle Grinding wheel size: 350 x 127 x 50 mm Minimum usable grinding wheel size: 300 mm Spindle speed: 1800 – 2000 rpm Spindle motor power: 3.7 kW (Peripheral) speed: 33 m/sec Rapid traverse: 40 mm Rapid traverse with handwheel: 20 mm Max. automatic infeed on diameter: 1.7 [3.4] mm Minimum diameter increment: 0.001 mm Infeed speed on diameter (coarse/fine): 0.015 – 6 / 0.015 – 3 mm/min Table Table speed: 0.1 – 5 m/min Table stroke: 450 mm Minimum travel: 2 mm Maximum table swivel range: -2° to +30° Work spindle Taper bore: MT-4 Spindle speed: 90 – 1000 rpm Spindle motor power (2-stage): 0.28/0.37 kW Including complete set of Schaublin collets DM 2.5 – 20 Incl. 3-jaw chuck Incl. flange with grinding wheel

Condition: new, WEISS 174282-014 spindle, dimensions see acceptance protocol, unused in opened original packaging, 100% functional, scope of delivery as per photos Iijdpfsxtwb Nsx Af Sjk

Condition: excellent (used), Weiss Type: WT11-1300/70/15/S Weiss Umwelttechnik Temperature Chamber WT11-1300/70/15/S 1300 litres –70°C to +180°C – 44 kW – Industrial Unit Water-cooled For sale is a professional temperature chamber from Weiss Umwelttechnik. This unit is engineered for demanding environmental simulation in industrial applications and is ideal for material testing, electronics, automotive, aerospace, and research sectors. The test chamber offers extremely rapid temperature changes and a large test volume. Technical data: Model: WT11-1300/70/15/S Test chamber volume: 1300 litres Temperature range: –70 °C to +180 °C Heating rate: up to 15 K/min Cooling rate: up to 15 K/min Temperature deviation: over time ±0.3–0.8 K / spatial ±0.5–2 K Humidity range (optional): 10–95 % rh, +10 to +95 °C Sound pressure level: approx. 73 dB(A) Electrical data: Voltage: 3/N/PE AC 400 V ±10 % Rated power: 44 kW Rated current: 63 A Refrigerants: R404A (14.0 kg) R23 (5.4 kg) Pressure stages: ND 18 bar / LP 19 bar / HD 25 bar External dimensions: Overall width: approx. 3,200 mm Overall depth: approx. 2,125 mm (1,385 mm housing + 740 mm door area / radius when open) Overall height: approx. 2,020 mm Internal dimensions – test area: Inside width: approx. 1,000 mm Inside depth: approx. 1,060 mm Inside height: approx. 1,230 mm Equipment: Test chamber made from stainless steel 1.4301 Viewing window in the door Touch panel control Ports: R1: 125 mm L1: 50 mm Connection for automatic water top-up Chilled water inlet & outlet connections Iiodpfex Eknpjx Af Sek Overflow/condensate connection Safety monitoring & alarm system Ideal for: Automotive / E-Mobility Aerospace Research & Development Electronics testing Materials laboratory / Quality assurance Volume: 1300 litres Weight: approx. 1,900 kg For your security as a buyer, the following steps are carried out on all chambers we offer: 1. Functional test and replacement of required components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted.) Please feel free to contact us by phone for further questions.

Condition: excellent (used), CATALOGUE NUMBER: 6943 TECHNICAL DATA - Feed hopper inlet: 1600x1500mm - Rotor working width: 1500mm - Main motor: 45kW - Pump motor: 5.5kW - Number of knives: 44 pcs - Knife dimensions: 50x50mm - Screen: 59mm - Pusher drawer Iiedpfx Afolnkxws Sek - Auto-reverse - Dimensions (L/W/H): 3430x2800x2850mm - Weight: approx. 9000kg ADVANTAGES – French manufacture - New knives installed – Auto-reverse – Pusher drawer – Very good condition – Used shredder Net price: 159,900 PLN Net price: 38,070 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: new, Weiss 178377 grinding spindle 21kw / 7000 rpm = 0002, unused, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Iiedpjxtwcmefx Af Sjk

Condition: excellent (used), Weiss Model: WK3 600/0-M Weiss Climate Test Chamber, Water-Cooled Series: WK3-../0 with SIMPAC* Controller Test chamber volume: approx. 600 liters Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm Operating data: Test chamber lighting: LED 24 V, 6.8 W / Halogen bulb 2 x 24V, 50W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Site-provided fuse: 16 A slow-blow Control cabinet and operator panel protection class: IP 54 Maximum heat emission to environment: 1200 W Sound pressure level: Measured at a distance of 1m from the front, at a height of 1.6m: 46 dB(A) Data for temperature tests: Temperature range: -5°C to +90°C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Temperature gradient (according to IEC 60068-3-5) Temperature change rate: Heating 0.6 K/min Cooling 0.3 K/min Heat compensation at +20°C to +50°C: 200 W Data for climatic tests: Isdpfxex Ag R Ss Af Ssik Temperature range: +10°C to +90°C Dew point range: 4 to +89.5°C Humidity range: 10 to 98 % r.h. Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity deviation: +1 to +3 % r.h. Refrigerant: R-404A Weight: 610 kg For your safety as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functionality check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Technical data and information subject to change and errors!) We are happy to answer any further questions you may have by phone.

Condition: new, Weiss 175342 spindle motor designation mW13.5/15.5-4 DBL.311002 EN60034, unused, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Iodpfx Aoxtwcaef Sjik

Condition: excellent (used), Weiss Type: SWT 1000 – IPX9K Weiss Spray and Splash Water Test Chamber Description: Offered for sale is a WaterEvent SWT 1000 test chamber from Weiss Technik – ideal for standardized testing of enclosure or component water ingress protection (IP) classes. With optional features, testing according to IPX9K (high-pressure/steam jet), ISO 20653, and additional standards is possible. High-pressure/steam jet nozzles for IPX9K Jet nozzles for IPX5/6, among others, compliant with standards: ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Possible Protection Classes & Tests Iisdpfxoxzprco Af Sek Depending on configuration, the SWT system covers a wide range of tests: Standard configuration: IPX3 / IPX4 tests (spraying and splashing water from all directions). Optionally: Higher protection classes up to IPX5 / IPX6 (jetting water), and – with corresponding high-pressure configuration – up to IPX9 and IPX9K. Tests are based on standards such as DIN EN 60529 (for IP protection levels) and ISO 20653 (e.g. for vehicle or outdoor applications) – depending on intended use. Typical Applications Typical application scenarios for such a test chamber include: • Electronic devices or enclosures intended for outdoor use or humid environments, such as outdoor lighting, control housing, assemblies, panels. • Components for vehicles or machines, especially those exposed to rain, splashing water, or high-pressure cleaning (e.g., construction machinery, e-bike or vehicle parts). • Batteries or electrical components requiring water ingress protection testing – e.g., automotive industry or e-mobility applications. Technical Data: Applicable protection classes: IPX3 / IPX4 Oscillating tube radius (for IPX3/4 tests): standard 200 mm (for SWT 1000), optionally up to 400 mm. Test chamber (interior): Internal dimensions: approx. 1,000 × 1,015 × 1,000 mm (W × H × D) Operation / Control: Web panel or GUI for test programming and control. Condition: used Scope of supply: (see photo) (Data subject to change and correction. Technical specifications may be updated without notice.) Further questions welcomed by phone.

Condition: ready for operation (used), WEISS 168928B-002 spindle, used, with normal signs of wear, 100% functional, delivery contents as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Iiedpjx Evbnofx Af Sjk

Condition: excellent (used), Weiss Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet Iisdsxxuytopfx Af Sjk This equipment tests the ingress of water into housings. In conjunction with a timer, the test cycle can be automated for an adjustable test duration from 3 seconds up to 30 hours. According to DIN VDE 0470 T1 and EN 60529 for testing protection ratings IPX3 and IPX4. Thanks to the integrated recirculation system, water consumption can be minimized. Features: - Glass door with wiper - Pneumatic drive for the oscillating tube - Adjustable oscillation angle - Interchangeable oscillating tubes - Swivel and exchangeable nozzle holders - Adjustable and monitored water flow rate - Test duration control Mechanical Load Data: - Max. load with test object (evenly distributed over area) - Permissible test load weight for carrying rack (total): 25 kg - Spray radius: 200 mm / 400 mm Test Data for IP Protection Ratings: - Oscillation speed: approx. 60°/s - Oscillation angle for IPX3: approx. ±60° - Oscillation angle for IPX4: approx. ±180° to -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating Data: - Voltage: 3/N/PE AC 400V ±10% 50 Hz - Rated power: 1.5 kW - Rated current: 5.0 A - Weight: 375 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: ready for operation (used), WEISS 168928B-001 spindle, used, normal signs of wear, 100% functional, delivery contents as shown in photos. ATTENTION: Please enquire for charges for packing and transport separately! Iiedpfjx Dxq Tjx Af Sjk

Condition: excellent (used), White temperature shock test chamber Here we offer a temperature shock test chamber. Weiss temperature shock test chamber air cooled ( Compressor was renewed ! ) Specification: Temperature range hot chamber +60°C ... +220°C Temperature range cold chamber -10°C ... -80°C Change hot-/cold chamber 10 s Temperature constancy ±1 K Dimensions and further data: External dimensions: Height 1990 mm Iijdpjk E Htyefx Af Ssk Width ( without and with swivel arm ) without....ca. 1820 mm with....ca. 1915 mm Depth ( without and with test chamber door ) without....approx. 900 mm with....approx. 1155 mm Dimensions of the lifting basket ( test chamber ) height 450 mm, width 500 mm, depth 600 mm volume 130 liters Test space load max. 20 kg Test chamber floor load max. 20 kg Cooling water pressure min. 2 ... max. 6 bar Max. Backup fuse 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of unit approx. 65 dB(A) Cooling cascade water cooled Connected load: 3/N/PE/AC 400V ±10% 50Hz /14,0 kW nominal current 26,0 A Refrigerant R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: ready for operation (used), Weiss 175487A motor grinding spindle SN 175487A-0036 with Indramat connector, used, normal signs of wear, 100% functional, delivery as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Iisdpfx Aex Dwiujf Sok

Condition: good (used), White Type: Walk-in climate simulation cell WK 50 / 40-120 Technical data climatic chamber: Temperature range -40...+120 °C Temperature tolerance: +/- 0.5°C Temperature change rate: 1 K/min Humidity range 15...approx. 95 % r.h. Humidity tolerance +/- 5.0 % r.h. Dimensions: Test room volume: 50m³ Iisdpfx Afsuvi R Ae Sok External dimensions (WxDxH) approx. 4800mm X 6100mm X 2640mm Test chamber (WxDxH) approx. 4500mm Χ 5000mm Χ 2200mm Door opening (WxH) approx. 3000mm X 2200mm Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.