Used Weiss Wm500 X 1000 Mm for sale (137)

Condition: used, Weiss SC 1000/+20IU Corrosion Climate Change Test Chamber Weiss SC 1000/+20 JU Corrosion Climate Change Test Chamber The test system is a combination of a climate test cabinet with variable temperature and humidity and a corrosion test cabinet with a salt spray test. In a time-lapse sequence, susceptible metallic components are tested for corrosion according to the relevant standards. Temperature operating range: Temperature: +20 °C ... +60 °C Temporal temperature deviation: +0.5K Climate operating range: Temperature: +20 °C ... +60 °C Temporal temperature deviation: +0.5K Relative humidity: 10...98 % RH Temporal humidity deviation: 3...5% RH Dew point: +12 °C ... +59 °C Salt spray test SS (temperature range ambient temperature +5 K ... +50 °C) according to DIN 50 021 (salt spray via 2-nozzle diffuser, 1.5 x 0.5 m, 80 cm height) Control: Digital measurement and control system SIMCON/32*-Net with touch panel Interfaces: serial interface RS 232 C, parallel printer interface Operating modes adjustable via process controller: - Temperature operation - Climate operation - Salt spray test - Direct spraying with salt solution Bsdpfx Ansph U Dhjqjww - Condensation load - Flushing of test chamber walls - Drying/ventilation of test chamber Temperature sensor: Pt 100 resistance thermometer Humidity sensor: psychrometric fresh measuring device TFT (with forced humidification) Technical data SC 1000/+20 JU Usable space dimensions: Height up to roof slope approx. 1000 mm + Roof approx. 350 mm Width approx. 1100 mm Width between heating elements approx. 1000 mm Depth approx. 1000 mm Test chamber door made of glass, left-hinged Height approx. 1350 mm Width approx. 1000 mm External dimensions including unit components and control cabinet Height approx. 2100 mm Width approx. 1450 mm Width with touch panel approx. 1700 mm Depth approx. 2600 mm Floor load max. 100 kg Brine storage tank approx. 200 l, with level monitoring, located separately beside/behind the unit Height approx. 1000 mm Width approx. 600 mm Depth approx. 900 mm Electrical connection: 400 V Connection power: 13 kW Weight: 1300 kg You can find more new and used items in our shop! International shipping costs on request!

Condition: used, WEISS Weiss WK3-1000/70 climate testing chamber with temperature and humidity control – 990 liters – -70 to +180 °C Weiss WK3-1000/70 Air-cooled climate and temperature testing chamber with touch panel, 990 liters test chamber volume, and a temperature range of -70 to +180 °C For sale is a Weiss climate testing chamber, type WK3-1000/70, with temperature and humidity control. The unit is suitable for temperature and climate testing of components, assemblies, and industrial products. The integrated touch panel allows for setting and monitoring temperature, humidity, and test programs. Technical data: Manufacturer: Weiss Type: WK3-1000/70 Product type: Climate and temperature testing chamber Serial number: 59226115080010 Test chamber volume: approx. 990 liters Cooling: Air-cooled Operation: Touch panel Weight: approx. 955 kg Test chamber dimensions: Height: 950 mm Width: 1,100 mm Depth: 950 mm External dimensions: Height: approx. 2,000 mm Width: 1,415 mm Depth: 2,105 mm Data for temperature testing: Temperature range: -70 to +180 °C Heating rate: approx. 4.0 K/min Cooling rate: approx. 2.5 K/min Data for climate testing: Temperature range: +10 to +95 °C Humidity range: 10 to 98 % relative humidity Electrical data: Rated voltage: 3/N/PE AC 400 V ± 10 % Mains frequency: 50 Hz Rated current: 29 A Rated power: 13.8 kW Refrigerant: R404A: 4.6 kg R23: 1.2 kg Equipment: Touch panel for operation and program control Test chamber made of stainless steel Viewing window with lighting Bodo Aghkuspfx Anqsww Air circulation system with fans Insert shelf Side openings: approx. 50 mm and 130 mm Communication interfaces Testing: The climate testing chamber has been tested. Heating, cooling, and humidity functions have been checked. Scope of delivery: 1 × Weiss WK3-1000/70 climate testing chamber with integrated equipment and insert shelf Scope of delivery as shown in the pictures. Condition: Used The unit has been tested. Condition and scope of delivery, see pictures. Tools, machines, and other items not explicitly mentioned are not part of the sale. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Weiss   Type: WT11-1000/40   Weiss temperature chamber, air-cooled, with Weiss condenser cooler   Test chamber volume approx. 990 liters   Data for temperature tests:   Temperature range -40°C to +180°C   Temporal temperature deviation in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature gradient (according to IEC 60068-3-5) 1 to 4 K   Temperature change rate (according to IEC 60068-3-5) Heating 4 K/min Cooling 3 K/min Bwedpfx Aezfzamjnqsw   Heat compensation max. 4500 W   Feedthroughs installed as standard R1: NW 125 mm L1: NW 50 m   Dimensions:   Test chamber dimensions: Width 1100 mm x Depth 950 mm x Height 950 mm Housing dimensions: Width 1390 mm x Depth 1525 mm x Height 1995 mm   Maximum load (evenly distributed over the area) of the test chamber floor 150 kg Per insert shelf 50 kg Total load of the shelf supports 100 kg   Data for operation:   Test chamber lighting: Halogen bulb 24V, 50W   Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 11.5 kW Rated current 22 A Heat dissipation water-cooled test cabinets max. heat dissipation to the environment 1.3 kW   Noise measurement: Sound pressure level approx. 64 dB(A)   Refrigerant: (converted to R-452a)   Weight: approx. 840 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by telephone.

Condition: used, Weiss   Type: WT11-1000/70/5   Weiss temperature chamber, air-cooled, with Weiss condenser cooler   Test chamber volume approx. 990 liters   Data for temperature tests:   Temperature range -70°C to +180°C   Temporal temperature deviation in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature gradient (according to IEC 60068-3-5) 1 to 4 K   Temperature change rate (according to IEC 60068-3-5) Heating 5 K/min Bwjdpfx Anjzfy Rwoqsw Cooling 5 K/min   Heat compensation max. 2750 W   Feedthrough installed as standard R1: NW 125 mm L1: NW 50 m   Dimensions:   Test chamber dimensions: Width 1100 mm x Depth 950 mm x Height 950 mm Housing dimensions: Width 1390 mm x Depth 1525 mm x Height 1995 mm   Maximum load (evenly distributed over the area) of the test chamber floor 150 kg per insert grid 50 kg Total load of the grid supports 100 kg   Data for operation:   Test chamber lighting: Halogen bulb 24V, 50W   Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 27.0 kW Rated current 42.02 A Heat dissipation water-cooled test cabinets max. heat dissipation to the environment 1.3 kW   Noise measurement: Sound pressure level approx. 64 dB(A)   Refrigerant: (converted to R-452a)   Weight: approx. 960 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data and information are subject to change!)   We will gladly answer any further questions you may have by telephone.

Condition: used, Weiss   Temperature test chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, operating hours 5128 h   For sale is a used temperature test chamber from Weiss Technik. The test chamber is used to test components and materials under various temperature conditions (e.g., cold, heat, aging).   Explanation of the designation: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = Low-temperature range (-70 °C) Bsdpfx Aey Dck Tsnqeww e = energy-optimized design 5 = Temperature change rate (series)   Equipment: Stainless steel interior Circulation fans Touch operation (WEBSeason) Viewing window Temperature control, automatic / manual   Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C   Temperature change: Cooling approx. 6 K/min Heating approx. 8 K/min   External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D)   Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW   Refrigerant: R449A / R23   Weight: approx. 1200 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss   Temperature testing chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021 Operating hours: 5018 h   For sale is a used temperature testing chamber from Weiss Technik. The testing chamber is used to test components and materials under various temperature conditions (e.g., cold, heat, aging).   Meaning of the designation: T = Temperature testing chamber 1000 = approx. 1000 liters volume 70 = Low-temperature range (-70 °C) e = energy-optimized version 5 = Temperature change rate (model series)   Equipment: Stainless steel interior Circulation fans Touch operation (WEBSeason) Viewing window Temperature control, automatic / manual   Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C   Temperature change: Cooling approx. 6 K/min Heating approx. 8 K/min   External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D)   Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW   Refrigerant: R449A / R23   Weight: approx. 1300 kg   For your security as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components Bjdpfx Aney Dclqeqeww 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by telephone.

Condition: used, Weiss   Temperature testing chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, operating hours 4748.2 h   For sale is a used temperature testing chamber from Weiss Technik. The testing chamber is used to test components and materials under various temperature conditions (e.g., cold, heat, aging).   Meaning of the designation: T = Temperature testing chamber 1000 = approx. 1000 liters volume 70 = Low-temperature range (-70 °C) e = energy-optimized design 5 = Temperature change rate (model series)   Equipment: Stainless steel interior Circulation fans Touch operation (WEBSeason) Viewing window Temperature control, automatic / manual   Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C   Temperature change: Bjdpfx Asy Dd Nqsnqjww Cooling approx. 6 K/min Heating approx. 8 K/min   External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D)   Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW   Refrigerant: R449A / R23   Weight: approx. 1200 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data, information are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Temperature test chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, operating hours 4748 h For sale is a used temperature test chamber from Weiss Technik. The test chamber is used to test components and materials under various temperature conditions (e.g., cold, heat, aging). Explanation of the designation: Bwsdpfx Ansy Dciisqew T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = Low-temperature range (-70 °C) e = energy-optimized design 5 = Temperature change rate (series) Equipment: Stainless steel interior Circulation fans Touch control (WEBSeason) Viewing window Temperature control, automatic / manual Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (HxWxD) Internal dimensions: approx. 950 x 1100 x 950 mm (HxWxD) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your security as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data, information subject to change!) We will be happy to answer any further questions you may have on the telephone.

Condition: used, Weiss   Temperature test chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, operating hours 5128 h   For sale is a used temperature test chamber from Weiss Technik. The test chamber is used to test components and materials under various temperature conditions (e.g., cold, heat, aging).   Explanation of the designation: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = Low-temperature range (-70 °C) e = energy-optimized design 5 = Temperature change rate (series)   Equipment: Stainless steel interior Circulation fans Touch operation (WEBSeason) Viewing window Temperature control, automatic / manual   Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C   Temperature change: Bsdsy Dclwspfx Anqjww Cooling approx. 6 K/min Heating approx. 8 K/min   External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D)   Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW   Refrigerant: R449A / R23   Weight: approx. 1200 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss   Temperature testing chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, operating hours 4979.69 h   For sale is a used temperature testing chamber from Weiss Technik. The testing chamber is used to test components and materials under various temperature conditions (e.g., cold, heat, aging).   Explanation of the designation: T = Temperature testing chamber 1000 = approx. 1000 liters volume 70 = Low-temperature range (-70 °C) e = energy-optimized version 5 = Temperature change rate (series)   Equipment: Stainless steel interior Circulation fans Touch operation (WEBSeason) Viewing window Temperature control automatic / manual   Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C   Temperature change: Cooling approx. 6 K/min Heating approx. 8 K/min   External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D)   Connection: 3/N/PE AC 400V =10% 50Hz Bwedpfxey El Ttj Anqsw Rated current: approx. 34 A Power: approx. 21 kW   Refrigerant: R449A / R23   Weight: approx. 1200 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data and information are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Climate testing chamber ClimeEvent C/1000/70/5, water-cooled, 1000 liters, year of manufacture 2019, operating hours 3577.95 h. For sale is a high-quality climate testing chamber of the type ClimeEvent C/1000/70/5. The device is used in industry, development, and quality assurance to test components and products under extreme temperature and climatic conditions. The chamber enables realistic simulations of environmental conditions – from extreme cold to high temperatures and humidity levels. Ideal for electronics, automotive, material testing, and research. The device operates reliably and reproducibly and is designed for long-term tests and tests in accordance with standards. With this climate chamber, temperature and humidity conditions can be specifically set and controlled. This allows the aging, stress, and function of components to be tested under real environmental conditions. Typical applications include temperature cycling tests, climate tests with humidity, and endurance tests. Due to the rapid temperature change (up to approx. 5 K/min), accelerated tests are also possible. Technical data: Type: ClimeEvent C/1000/70/5 Year of manufacture: 2019 Temperature range: approx. -70 °C to +180 °C Temperature change rate: up to approx. 5 K/min Humidity range: approx. 10 % to 98 % RH Internal dimensions (test chamber): approx. 950 x 1100 x 950 mm Volume: approx. 1000 liters External dimensions (approx.): 2000 x 1415 x 2030 mm Power connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: approx. 21 kW Rated current: approx. 34 A Refrigerant: R449A / R23 Weight: approx. 1300 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Bwedpfey Iyx Aox Anqsw Condition: used Scope of supply: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Weiss Technik Salt spray chamber / corrosion test cabinet Weiss Technik SaltEvent SC 1000 Corrosion test equipment / salt spray test chamber For sale is a used Weiss Technik SaltEvent SC 1000 salt spray chamber. The device is suitable for corrosion tests, salt spray tests, material testing, surface testing, quality assurance, as well as research and development. Technical data Manufacturer: Weiss Technik GmbH Type: SaltEvent SC 1000 Device type: Salt spray chamber / corrosion test equipment Year of manufacture: 2019 Test chamber size: Size 1000 liters Rated voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.6 kW Rated current: 11.3 A Customer-side fuse: 16 A slow-blow Weight: approx. 370 kg Overall dimensions according to layout drawing: approx. 2910 × 900 × 960 mm Max. test chamber load: 150 kg Floor grid load: 150 kg Insertion rods: 8 kg per rod Shelf for machine part covers: 5 kg Temperature range salt spray test: Ambient temperature +5 K to +50 °C Temperature range condensation test: Ambient temperature +5 K to +42 °C Temperature compressed air humidifier: Ambient temperature +5 K to +70 °C Temperature stability over time: ±1 K Salt solution consumption during salt spray test: approx. 0.5 to 1.5 l/h Equipment S!MPAC control system WEBSeason / color control panel Touch operating panel Test chamber hood Storage tank Control cabinet Floor grid / test chamber grid Compressed air humidifier Hood locking Temperature monitoring Interface Documentation as shown in the pictures Connections / media supply Power connection: 230 V / 50 Hz Compressed air connection available Connection for demineralized water available Exhaust connection available Water drain / condensate drain available Application areas Salt spray test Corrosion test Condensation test Material testing Surface testing Coating testing Automotive Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of supply 1x Weiss Technik SaltEvent SC 1000 salt spray chamber Storage tank Accessories as shown in the pictures Documentation as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Inspection possible by appointment. Loading with a forklift is available. Shipping or freight forwarding is possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone. Bodszg Er Aopfx Anqsww

Condition: used, Weiss Type: WK1-1000/70 Weiss Climate Test Chamber, Water-Cooled (Refrigerant converted to R-452A) Control Panel “Touch Panel” All control and operating commands can be initiated on the “Touch Panel” control panel by simply touching the function symbols. Feedthroughs The test chamber is equipped with feedthroughs on the right and left sides. These allow measurement cables and testing equipment to be placed in the test chamber. Feedthroughs: 1 feedthrough, ∅ 125 mm, installed on the right 1 feedthrough, ∅ 50 mm, installed on the left Volume: 990 liters Test chamber dimensions: Test chamber: Width 1100 mm, Depth 950 mm, Height 950 mm Housing: Width 1385 mm, Depth 1850 mm, Height 1980 mm Data for temperature tests: Minimum temperature: -70 °C Maximum temperature: +180 °C Temperature deviation, temporal: ± 0.1 to ± 0.5 K Temperature homogeneity, spatial: ± 0.5 to ± 2 K Bodpjzgbtpefx Anqoww Temperature change rate, heating: 4 K/min Temperature change rate, cooling: 2.5 K/min Max. heat compensation: 2750 W Data for climate tests: Temperature range: +10°C to +95°C Humidity range: 10 to 98% RH Temperature deviation, temporal: ± 0.1 to ± 0.3 K Temperature homogeneity, spatial: ± 0.5 to ± 1 K Humidity deviation, temporal: ± 1 to ± 3% RH Data for operation: Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Nominal current: 29A, Nominal power: 19.8 kW Refrigerant: R-452A / R23 Weight: approx. 910 kg For your safety as a buyer, here is the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, WEISS TECHNIK Salt Spray Test Chamber / Corrosion Test Chamber SC 1000 Professional salt spray test chamber for corrosion, salt spray, and condensation tests For sale is a used salt spray test chamber from the manufacturer Weiss Umwelttechnik GmbH. The system is suitable for professional corrosion tests, salt spray tests, and condensation tests in laboratories, the automotive industry, research, and quality assurance. Equipped with a color touch panel, Ethernet interface, and a test chamber volume of approximately 950 liters. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Model: SC 1000 Year of manufacture: 2015 Test chamber volume: approx. 950 liters Supply: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.6 kW Rated current: 11.3 A Compressed air: 4–10 bar (max. 10 bar) Deionized water: 3–5 bar Control: Bwedpfxozlgyrs Anqow Programmable color touch control Ethernet network interface RS232 interface Dimensions: External dimensions (W × D × H): approx. 2,730 × 800 × 1,370 mm Test chamber dimensions (W × D × H): approx. 1,560 × 570 × 1,190 mm Test chamber volume: approx. 950 liters Weight: Tare weight (without brine): approx. 220 kg Equipment: 950-liter test chamber Color touch panel Ethernet interface RS232 interface Programmable control Salt spray testing Condensation testing Heated compressed air humidifier Integrated brine tank Compressed air connection Deionized water Exhaust connection Application areas: Corrosion testing Salt spray tests Condensation tests Material testing Coating testing Paint testing Automotive industry Quality assurance Testing laboratory Research and development Scope of supply: Weiss Technik SC 1000 Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. The table shown in the photos and other items not explicitly mentioned are not included in the sale. Shipping by freight forwarder is possible. Subject to change, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Weiss Type: WT3-1000/40 Weiss temperature testing cabinet with S!MCON / 32 control, water-cooled Control panel: "Touch Panel" All control and operating commands can be initiated on the "Touch Panel" control panel by simply touching the function symbols. Adjustable feet To compensate for uneven floors and to ensure sufficient ventilation of the machine, the testing cabinet is equipped with adjustable feet. Feedthroughs The testing cabinet is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be routed into the testing chamber. Feedthroughs installed as standard R1: 125 mm L1: 50 mm Testing chamber volume: approx. 990 liters Testing chamber dimensions: Height 950 mm, Width 1100 mm, Depth 950 mm External dimensions: Height 2000 mm, Width 1415 mm, Depth 2105 mm Data for temperature tests: Temperature range: -40 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K Temperature change rate Heating: 4.0 K/min Cooling: 3.0 K/min Maximum heat compensation: 4500 W Data for operation: Testing chamber lighting: Halogen bulb 2x 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 22.0 A, Rated power 11.5 kW Fuse, to be provided by the customer: 32 A, slow-blow Sound pressure level approx. Bsdpfxjzgbt Ne Anqjww measured at a distance of 1 m from the front, 1 m height: 56 dB(A) Refrigerant: R-404A Weight: 840 kg For your safety as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Weiss   Type: WT-1000/70/5   Weiss temperature testing chamber, water-cooled With a temperature change rate of 5 K/min   Data for temperature tests: Temperature range: -70 °C to +180 °C Temporal temperature deviation in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature homogeneity: ± 0.5 to ± 2 K   Temperature change rate: Heating: 6.1 K/min Cooling: 6 K/min   Permissible test specimen weight: Total load on the test chamber floor: 150 kg Load per insert shelf: 50 kg   Dimensions: Test chamber dimensions: Height 950 mm, Width 1100 mm, Depth 950 mm External dimensions: Height 2000 mm, Width 1415 mm, Depth 2105 mm   Test chamber volume: 990 liters   Data for operation: Nominal voltage: 3/N/PE AC 400 V ± 10% 50 Hz Nominal current: 38 A Nominal power: 26 kW Refrigerant: R404 / R23 Weight: approx. 955 kg   Information for buyers: To ensure the safety of our customers, the following work will be carried out on the offered climate chambers in advance:   1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. Documented test run after successful inspection   Condition: used   Scope of supply: (See image)   (Changes and errors in the technical data are subject to change!) Bodpfxey D Nyue Anqsww   We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Temperature test chamber TempEvent T/1000/70/5, water-cooled, 1000 liters, year of manufacture 2020, operating hours 6126 h. Description: For sale is a high-quality climate test chamber from Vötsch Industrietechnik (Weiss Technik), model TempEvent T/1000/70/5. The device is used to simulate temperature conditions and is ideal for: Material tests Electronics tests Environmental and aging tests Quality and endurance tests The chamber can generate very low temperatures up to approx. -70 °C as well as high temperatures up to +180 °C and change these at a defined rate (temperature ramps). Precise control allows reproducible test conditions to be achieved. Operation is conveniently carried out via an integrated touch panel. Special features: Fast temperature changes (up to 5 K/min) Uniform temperature distribution in the test chamber Water-cooled system Bwedpfxoyxm Ule Anqjw Industrial standard – robust design Maintenance indicator and operating hour counter available Technical data: Model: TempEvent T/1000/70/5 Temperature range: approx. -70 °C to +180 °C Temperature change: up to 5 K/min High precision & stability: Temporal temperature deviation: ±0.1 to ±0.5 K → very stable temperature over time Spatial deviation: ±0.5 to ±1.0 K Temperature gradient: ≤ 2.0 K This makes the chamber ideal for demanding testing processes with high repeatability Test chamber: approx. 950 × 1100 × 950 mm (W × H × D) External dimensions: approx. 2000 × 1415 × 2030 mm (W × H × D) Side opening 50 cm / 125 cm Electrical data: 400 V / 3~ / 50 Hz Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A (approx. 2.9 kg) R23 (approx. 1.3 kg) Weight: approx. 1200 kg For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Year of construction: 2013, grinding diameter 390 mm grinding length 650 mm centre height 200 mm control Siemens 840D total power requirement 46 kW weight of the machine ca. 6 t dimensions of the machine ca. 3x3x2,4 m Universal cylindrical grinding – Type WUG21 (W27) Grinding length 650 mm EMAG Weiss stands for high-end technology in universal cylindrical grinding between centres. With its CNC-controlled WUG 21 machines, EMAG Weiss offers the right solution for virtually every user. --> Technical data Max. grinding length: 650 mm --> Centre height: 200 mm --> External grinding diameter: 1 – 390 mm --> Max. weight flying MK4: 100 kg --> Max. workpiece weight between centres: 250 kg --> Feed: --> X-axis travel: 480 mm --> Z-axis travel: 1.150 mm --> Workpiece headstock --> Tailstock --> Grinding spindle headstock --> Coolant device, manufacturer HYFRA, --> Belt filter, manufacturer Knoll, type KF 200 - year of manufacture 2012, --> Oil mist filter, manufacturer Cobaron Bjdpfxow Inr Nj Anqoww Here are a few specifications for the machine: - Grinding length / max. workpiece length: 650 mm - Max. workpiece diameter: 400 mm (center-to-center distance: 200 mm) - Workpiece headstock: MK4, speed up to 600 rpm, continuously adjustable - Hydraulic NC tailstock with 150 mm stroke, MK4 - 2 external grinding spindles—1 wheel on the left, 1 wheel on the right—B- axis infinitely adjustable - Grinding wheel peripheral speed: 50 m/s - Grinding spindle motors: 7.5 kW each, toothed belt drive - Machine dimensions (without external peripherals): Width 4130 x Depth 2400 x Height 2300 mm - No rotating dressing device for CBN grinding wheels; only a holder for a stationary dressing tile

Condition: used, Weiss Type: WT 5.1'/ Mini-SHED for diurnal loss measurements Test chamber dimensions: Width 1600 mm x Depth 2140 mm x Height 2150 (usable 1600) mm Housing dimensions: Width 1760 mm x Depth 3100 mm x Height 2790 mm Maximum floor load: 250 kg Operating temperature range: +18 °C ... +45 °C (at higher temperatures, SHED operation is only possible without a Tedlar bag) Temperature range: +18 °C ... +45 °C Temperature stability: ≤ ±1 K (over time) Temperature change rate (heating and cooling): approx. 0.5 K/min, without test specimen Channel connection (air inlet and outlet): ∅ 80 mm, in the rear wall of the chamber Shut-off valve, gas-tight (air inlet and outlet): ∅ 80 mm, gas-tight, pneumatic operation. Delivery scope: Connection flange of the shut-off valve Cooling water consumption: approx. 0.8 m3/h Voltage: 230/400 V; 3 phases + N + PE; 50 Hz Rated power: 4.1 kW Rated current: 14.0 A Weight: approx. 2500 kg Type: WT 5.1'/ Condition: used Sale from current location Bwodpozd Slkofx Anqow Scope of delivery: (Only the Weiss emissions test chamber WT 5.1' + Mini-SHED) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Umwelttechnik GmbH Salt spray chamber / Corrosion test cabinet Weiss SC/KWT 450 salt spray chamber Testing system for corrosion, salt spray, and condensation water tests Bwjdozd Axbjpfx Anqow For sale is a used salt spray chamber from the manufacturer Weiss Umwelttechnik GmbH. The system is suitable for corrosion tests, coating tests, material tests, quality assurance, and long-term durability tests under standardized environmental conditions. Technical data Manufacturer: Weiss Umwelttechnik GmbH Type: SC/KWT 450 Equipment type: Salt spray chamber / Corrosion test cabinet Test chamber volume: 450 liters Test chamber dimensions: approx. 850 x 570 x 740 mm (W x D x H) External dimensions: approx. 1930 x 800 x 920 mm (W x D x H) Weight: approx. 180 kg Max. load: 100 kg Brine reservoir: 180 liters Salt spray test: Room temperature to +50 °C Condensation water test: Room temperature to +45 °C Humidifier temperature: up to +75 °C Standards: DIN 50021 Salt spray test DIN 50017 Condensation water test KFW DIN 50014 Normal climate (ventilation) Power connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 8.5 A Equipment Programmable control Test chamber with sample holders Brine supply system Air purification Documentation / Service documents available Accessories as shown in the pictures Application areas Corrosion testing Salt spray tests Coating testing Automotive industry Material testing Quality assurance Research and development Scope of supply 1x Weiss SC/KWT 450 salt spray chamber Documentation / Service manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Weiss Umwelttechnik GmbH Salt spray chamber / Corrosion test cabinet Weiss SC/KWT 450 salt spray chamber Testing system for corrosion, salt spray, and condensation water tests For sale is a used salt spray chamber from the manufacturer Weiss Umwelttechnik GmbH. The system is suitable for corrosion tests, coating tests, material tests, quality assurance, Bedozd Az Ajpfx Anqoww and long-term durability tests under standardized environmental conditions. Technical data Manufacturer: Weiss Umwelttechnik GmbH Type: SC/KWT 450 Equipment type: Salt spray chamber / Corrosion test cabinet Test chamber volume: 450 liters Test chamber dimensions: approx. 850 x 570 x 740 mm (W x D x H) External dimensions: approx. 1930 x 800 x 920 mm (W x D x H) Weight: approx. 180 kg Max. load: 100 kg Brine reservoir: 180 liters Salt spray test: Room temperature to +50 °C Condensation water test: Room temperature to +45 °C Humidifier temperature: up to +75 °C Standards: DIN 50021 Salt spray test DIN 50017 Condensation water test KFW DIN 50014 Normal climate (ventilation) Power connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 8.5 A Equipment Programmable control Test chamber with sample holders Brine supply system Air purification Documentation / Service documents available Accessories as shown in the pictures Application areas Corrosion testing Salt spray tests Coating testing Automotive industry Material testing Quality assurance Research and development Scope of supply 1x Weiss SC/KWT 450 salt spray chamber Documentation / Service manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Year of construction: 2020, operating hours: 21,398 h, machine/vehicle number: IntNr231185, EMAG WEISS W11 CNC SL650 – Universal Cylindrical Grinding Machine – Year of Construction: 2020 For sale is a used EMAG WEISS W11 CNC SL650 – a high-performance universal cylindrical grinding machine with CNC control. This machine is ideally suited for demanding grinding operations on individual parts, prototypes, and small to medium production runs. Machine Specifications Manufacturer: EMAG WEISS Type: W11-CNC SL650 Year of Construction: 2020 Bwedpfx Ae Ahq Sbenqow Operating Hours: Approx. 8,850 spindle hours / approx. 22,000 power-on hours Condition: Used, well-maintained, ready for immediate operation Technical Data Control: CNC-controlled (e.g., Heidenhain / Siemens / Fanuc – depending on the configuration) Max. Grinding Length: 650 mm (between centers) Center Height: Approx. 200 mm External Grinding Diameter: Up to approx. 390 mm Max. Workpiece Weight (overhanging): Approx. 100 kg (MK4) Max. Workpiece Weight (between centers): Approx. 250 kg X-Axis Traverse: Approx. 380 mm Z-Axis Traverse: Approx. 1,150 mm Grinding Wheel Diameter: 400 – 500 mm depending on equipment Rated Power: 9 – 11 kW (approx. 12 – 15 hp) Peripheral Speed: 20 – 50 m/s Equipment and Performance Features CNC touchscreen operation with Windows-based interface – user-friendly programming via dialogue or DIN/ISO (optional) Two-in-one concept: The machine can be operated both conventionally and CNC-controlled. High-precision linear and ball screw guides for high accuracy Direct measuring system (glass scales) (optional on many machines) Automatic dressing of the grinding wheel with compensation Crash control & gap monitoring for machine and process safety Coolant system, emulsion separator, and chip conveyor available (depending on equipment) Preparation for automation / robot interface possible The machine can be inspected in operation by appointment. Subject to changes and errors in technical data and specifications as well as prior sale!

Condition: used, Weiss Type: WK 27'/50-150 Water-cooled climate chamber Technical data: Test chamber designation: WK 27'/50-150 External dimensions Height 3500 mm, Width 3400 mm, Depth 6000 mm Control cabinet dimensions Height 2000 mm, Width 2400 mm, Depth 400 mm Internal dimensions Height 3000 mm, Width 3000 mm, Depth 3000 mm Floor load 30000 N/m³ (surface load) Test chamber volume: approx. 27000 liters Bwjdpjzizhfjfx Anqjw Test specimen mass 1000 kg Cold / heat operation -50°C to 150°C Heating 1.0 K/min Cooling 1.0 K/min Temperature stability +- 0.3 to 1.0 K (over time) Temperature stability +- 0.1 to 0.5 K (over time) Climate operation 10 – 90°C Humidity 10...98 % RH Temperature stability +- 0.1 to 0.5 K (over time) Dew point range +4 to +84 °C 3/N / PE AC 400 V ±10% 50 Hz Weight: 7000 kg Refrigerant R23 and R404A With extra floor plates to increase the floor load For your security as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerants 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Weiss   Type: WT-600/70   Weiss Temperature Test Chamber, Water-Cooled   Technical Data: Test chamber designation: WT-600/70   External dimensions with hinges and door closure Height 1995 mm, Width 1090 mm, Depth 1660 mm   External dimensions without hinges and door closure Height 1995 mm, Width 1000 mm, Depth 1660 mm   Internal dimensions:   Height 950 mm, Width 800 mm, Depth 800 mm   Test chamber volume: approx. 600 liters   Cooling / Heating operation -70°C to 180°C   Temperature change per unit of time Cooling down approx. 2.5 K/min Heating up approx. 4 K/min   3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19 A Fuse on customer side: 32 A, slow-blow Permissible test item weight Total load of the shelf supports 80kg   Test chamber floor 80kg, insert shelf 40kg   Refrigerant: R 404A/R23   Weight: 675 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant Bodpfx Aezd R Drenqsww 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss   Type: WT1-340/30   Converted to R452a   Weiss temperature chamber, air-cooled   Temperature range: from -30°C to 180°C   Temperature change rate, cooling: 1.6 K/min Temperature change rate, heating: 2.1 K/min   Test chamber dimensions: Width 550 mm x Depth 750 mm x Height 800 mm Housing dimensions: Width 800 mm x Depth 1500 mm x Height 1800 mm   Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 4.9 kW, Rated current: 9 A   Refrigerant: R452a   Weight: 515 kg   For your safety as a buyer, please note the following information:   The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run.   Bsdpfx Anozd Rw Soqoww Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have over the phone.