Climatic cabinet

WEISS 3'Plus 20 DU-SD-DT

Condition: not inspected (used), White Type: SD/17'/30 DU Water-cooled Control system: S!MCON 32 with touch panel and RS 232 interface Working temperature range: Temperature range: -40 °C ... +95 °C Temperature stability: ± 0.5 K ( temporal ) Cooling speed from +80 °C to -40 °C 1 K/min on average Heating speed from -40 °C to 80 °C 1 K/min on average Working range Climate: Civdabzabq Temperature range: +10 °C ... +95 °C Temperature constancy: < ± 1.0 K ( temporal ) Humidity range 15 ... 80 % r.h. ( without thermal load ) Humidity constancy < ± 3-5 % r.h. ( temporally ) Dew point temperature range +9 °C ... +78 °C without load Dimensions and further data: Internal dimensions: Height approx. 2000 mm Width approx. 2500 mm Depth approx. 3500 mm External dimensions with units Height approx. 2500 mm Width approx. 2900 mm Depth approx. 5520 mm Air circulation system depth approx. 600 mm Control cabinet Height approx. 2200 mm Width approx. 1800 mm Depth approx. 400 mm Test chamber equipment Measuring cable bushing 1 pc. DN 100 with blind plug Door (2-panel) Height approx. 2000 mm, width approx. 2200 mm Access ramp width 600 mm, length 1200 mm Wall window: height approx. 600 mm, width approx. 450 mm Floor load capacity: 30,000 N/m² (surface load) Refrigerant: R-404 A Refrigeration unit: water-cooled Mains connection 3/N/PE AC 400 V ±10 % 50 Hz Rated output: approx. 64 kW Rated current: 99 A Volume: 17m³ Commissioning and wiring must be carried out by the buyer. Chamber is untested, all documents/wiring diagrams are available. Weight: approx. 4000 kg Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), White SD 1400/+20...100DU Pulsator Climatic cabinet Oven Heating cabinet Drying cabinet INSIDE: H 80 cm W 2 m D 90 cm from 20 to 100°C Humidity from 10 to 98 frequency 100-1000 strokes/minute Load from top 450N each Celiefjoct heating 0,5 Kmin

Condition: excellent (used), White Blylwevzlj3 Type: T/210/40/3 Technical data: Air-cooled Cooling/heating operation: -40°C...+180 °C Temperature change rate: Cooling: approx. 3.1 K/min Heating up: approx. 2.5 K/min Temperature deviation temporal ±0.2 to ±0.5 spatial ±0.5 to ±1.5 External dimensions: 1640 x 850 x 1290 mm Test chamber dimensions: 630 x 560 x 570 mm Test chamber volume 201 liters The supply voltage is Power supply 230 V (+-10%) 1/N/PE AC 50 Hz. Rated current: 7A Nominal output: 1.5 kW Refrigerant: R449A Weight 325 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 1991, Condition: used, temperature max. ? ° length ? mm Ukvw7Iyt9P width ? mm height ? mm total power requirement ? kW weight of the machine ca. ? t dimensions of the machine ca. ? m

Condition: used, axle configuration: 3 axles, first registration: 10/2005, color: other, Year of construction: 2005, Empty weight: 3.750 kg Coo7P8Ika0 Axle 1: left 12 mm right 7 mm Axle 2: left 4 mm right 6 mm Axle 3: left 10 mm right 10 mm We have the possibility to stack trailers!

Year of construction: 1993, Condition: ready for operation (used), There are 2 Finnrose/Dustcontrol drying channels available. 1) Finnrose A/S Fodo-3-1, year of manufacture: 1993. 2)Dustcontrol DC/DT 5000/1300, year of manufacture: 1984. Air capacity supply air/exhaust air: 1200/1200m³/h, power requirement supply air: 7.5kN ex, heating medium: 120-100°C, heat quantity: 66.2kW. Solvent vapor quantity/D max.: 140l/min, solvent quantity/C max. 480g/min. On-site inspection is possible. Dfymjukbv

Condition: used, machine/vehicle number: 516210H00326, Year of construction: 2017, operating hours: 6,172 h, load capacity: 1,500 kg, lifting height: 3,300 mm, free lift: 1,740 mm, mast type: duplex, construction height: 2,110 mm, drive type: Elektro, net weight: 3,000 kg, Electric 3-wheel forklift truck Fahrgestellnummer: 516210H00326 Mast type: Duplex Technical condition: good Battery Volt: 48V Battery Ah: 690Ah Dpsl8H Battery year of construction: 2017 Description: Still RX 20-15 M0519 Year of construction: 2017 Operating hours: 6,172 The device is visually in very good condition and technically in good condition. Subject to errors and prior sale. If you have not found your truck, please contact us. We still have a large selection of other appliances on site 3rd valve, 4th valve,

Condition: used, machine/vehicle number: 516216G00892, Year of construction: 2016, operating hours: 11,600 h, load capacity: 2,000 kg, lifting height: 3,370 mm, free lift: 1,770 mm, mast type: duplex, construction height: 2,200 mm, drive type: Elektro, Electric 4-wheel forklift truck Fahrgestellnummer: 516216G00892 Mast type: Duplex Condition: Reconditioned without warranty Technical condition: good Dpsl77 Battery Volt: 48V Description: Still RX 20-20 P No.: R0443 Year of construction: 2016 Read operating hours: 11600 The device is visually in very good and technically in good condition. Subject to errors and prior sale. If you have not found your truck, please contact us. We have a large selection of other appliances on site. Sideshift, 3rd valve, 4th valve,

Condition: used, Functionality: fully functional, Year of construction: 2016, operating hours: 1,303 h, load capacity: 2,000 kg, lifting height: 3,150 mm, free lift: 1,560 mm, fuel type: electric, mast type: duplex, construction height: 2,121 mm, fork carriage width: 1,040 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Duplex Gearbox: 1-pedal control Condition: Ready for use and fully functional Bn7Y3Pgf Technical condition: good Front tires type: Superelastic Front tires size: 200 50 10 Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires size: 140/55-9 Rear tires condition: 60 - 80% Battery voltage: 48V Battery Ah: 750Ah Battery manufacturer: IBB Battery type: PzS Battery year of manufacture: 2016 Battery condition: 60 - 80% Description: Handover with new FEM.4004 test including test book If you have any further questions, please call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik Leasing & financing and we will be happy to inquire about delivery at favorable conditions for you. Linde equipment can also be traded in - even without purchasing a device from us. The operating hours shown were read off at the time of entry. Subject to prior sale, changes and errors. Sideshift, 4th valve up to fork carriage / sideshift integrated 3rd valve, 4th valve, rear work light, front work light, roof cover, full free lift, safety light,

Condition: used, machine/vehicle number: 13512, Year of construction: 2018, operating hours: 14,624 h, load capacity: 1,600 kg, lifting height: 3,300 mm, free lift: 1,580 mm, mast type: duplex, construction height: 2,150 mm, drive type: Elektro, Electric 3-wheel forklift truck Chassis number: 13512 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: normal Battery year of construction: 2019 Description: Toyota 8FBE16T No.: R0191 Year of construction: 2018 Operating hours: 14,624 The device is visually and technically in normal condition. Charger on request Errors and prior sale reserved. If you have not found your truck, please contact us. We have a large selection of other appliances on site. Beiyfgi Sideshift, 3rd valve,

Condition: used, axle configuration: 3 axles, first registration: 03/2008, color: other, Year of construction: 2008, Empty weight: 7.070 kg Axle 1: left 8 mm right 13 mm Axle 2: left 12 mm right 11 mm Axle 3: left 13 mm right 13 mm Dnveez

Condition: excellent (used), Year of construction: 1982, Cutting length 2040 mm max. sheet thickness 400 N/mm² 3 mm max. sheet thickness 700 N/mm² 2 mm Cutting angle 1° 30' Stroke rate 65 / min Backgauge 530 mm throat depth 100 mm Table width 270 mm Working height 960 mm Motor power 7.5 kW Dimensions, machine L x W x H 2600 x 1250 x 1300 mm Weight 2100 kg Qhctdsqx Accessories / Special features: - Manual back gauge 530 mm, adjustable from the rear - 1 side fence 1000 mm with scale - 2 support arms - Selector switch for 1 = off, 2 = stroke in, 3 = continuous stroke, 4 = jog mode - Electric foot switch The sheet metal hold-down bar has been professionally welded and has no adverse effect on the machine. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, axle configuration: 3 axles, first registration: 06/2005, color: other, Year of construction: 2005, Empty weight: 6.500 kg Drgaw9 Axle 1: left 6 mm right 9 mm Axle 2: left 2 mm right 2 mm Axle 3: left 8 mm right 8 mm

Condition: excellent (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hob cutter 6 pieces -Type: Mod.3 R1 EW 20° see photos -Hole: Ø 32 mm -Price/Delivery: complete Bw3Xgtv7Cw -Transport dimensions: 270/175/H115 mm -Total weight: 14.5 kg

Condition: ready for operation (used), Year of construction: 2017, Nominal payload: 20kg, nominal additional load arm: 10kg, nominal total load: 30kg, position repeatability: ±0.05mm, number of axles: 6, reach: 1611mm, height: 2026mm, weight: 254kg. No known defects, has been regularly serviced, on-site inspection is possible. Dqv7X7

Condition: new, The scope of delivery includes: 20x heavy-duty dowels, new Manufacturer: Fischer Type: FAZ II plus M12/ 10 Total length: approx. 110 mm Ø: 12 mm B2Du0D8Pho Weight per unit: approx. 0.060 kg Further technical data can be found in the enclosed picture material. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter Drdptb -Manufacturer: Fette, hob cutter 3 pieces -Type: Mod.1,5 EW 20° see photos -Hole: Ø 32 mm -Price/Delivery: complete -Transport dimensions: 190/170/H120 mm -Total weight: 9.5 kg

Condition: good (used), Max. diameter: 2000mm; Module: 30 Drdkrf

Condition: excellent (used), Year of construction: 2004, I sell the horizontal wood shredder DI Mechanik SDOP 400/3, Made in Slovakia Year 2004 Cylinder system with 3 knives. 400x150mm input in the shredder Motor 30KW Dpjqyl Productivity apprx 5-7 m3 / hr. Condition like new. Avialable immediately.

Condition: new, Year of construction: 2024, neu 2024 9739 prompt, Zwischenverkauf v Türkei 22300 € 457.15 € 1 1 2030 mm 6 mm 6 mm 5 mm 170 mm 4 kW 3600 mm 1020 mm Stlwxmhmw 1120 mm 2400 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo)

Condition: used, Year of construction: 2022, operating hours: 39 h, power: 67 kW (91.09 HP), next inspection (TÜV): 04/2025, Equipment: ABS, air conditioning, all wheel drive, cabin, front linkage, * EZ: 04/2023 * Power Setting 2 * Load sensing system with variable displacement pump * Comfort seat with air suspension * Swivel mudguards Dqspwv * Compressed air * Suspended front axle * Front loader Subject to errors and prior sale Viewing only possible by appointment

Condition: like new (used), machine/vehicle number: 00399, LT Industries – Quantum 1200 Plus, model 20 channel multiplexer • Real-Time Multi-Constituent Process Analyzers • Multipoint, Fiber Optic Multiplexing Capability • Shock and Vibration Free The LT Industries Quantum 1200 Process Analyzer Series is comprised of the rugged, rapid scanning Quantum 2000 and 1200 Systems which were developed for both Pilot Plant and dedicated stand-alone installations in closed-loop-control of manufacturing processes. Using rugged, proven technology, LT Industries' systems enhance quality control, increase yield and reduce waste by providing real-time analysis. The sampling process is non-destructive and non-extractive, involving none of the sample preparation required by other testing technologies. LT Industries' Quantum 1200 Process Analyzers provide continuous multiple analyses in real-time. These analyses have proven to be as accurate as traditional lab testing for liquids, powders, solids, slurries, pastes, emulsions and/or suspensions. These systems deliver the real-time data output that has made LT Industries a recognized NIR leader in process measurement for control. Artisan Scientific Corporation dba Artisan Technology Group is not affiliated with or a distributor for LT Industries. The depiction, description, or sale of products featuring names, trademarks, brands, and logos is for identification and/or reference purposes only and does not indicate any affiliation with or authorization by any rights holder. T Industries' Quantum 1200 Process Analyzers provide continuous multiple analyses in real-time. These analyses have proven to be as accurate as traditional lab testing for liquids, powders, solids, slurries, pastes, emulsions and/or suspensions. Our systems deliver the real-time data out-put that has made LT Industries a recognized NIR leader in process measurement for control. The Quantum 1200 Process Analyzer Series combines analytical power and intelligence with ease of use in an integrated systems package. A pre-dispersed, monochromatic beam of light travels through the patented harmonic drive grating mechanism, where is it separated into discrete wavelengths and sent through a fibre optic link to illuminate the sample. The light transmitted back through the fibre optic link is converted into an electrical signal, which is compared by the microprocessor to the calibrated responses in memory. The data output results of this comparison are then used for process control Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment Delivery condition, FCA: Oradea/Romania We can deliver/export everywhere in the World. Itrgptgr Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Handtmann DSD100SM64U20P incl. Baumüller RE-21-1-A05 (DSD 100 SM 64 U 20 P)   Condition  DE: used EN: used Dqzkid  

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 149930 € 2983.61 € 3 kW 12 mm 6 mm 6 mm 3 mm 6 mm 26,5 kW 250 mm 16 mm 160 x 160 mm 200 x 150 mm 6000 mm 58 kg/m +/- 0,2 mm +/- 0,05 mm rund, quadratisch, rechte 40 m/min 94 m/min 30 m/min 510 °/s The machine consists of the following components: - Encapsulated cutting room with protective glazing Dqxkbn - CNC graphic control with touchscreen - Laser source Brilase 3 kW Premium incl. chiller - Cutting head with automatic focus adjustment - manual loading -manual unloading table 3 m - Positioning laser - Central lubrication - slug car - CAD/CAM software with autonesting - Work area lighting PRICE FCA TÜRKIYE OPTIONS: Suction unit with filters Semi-automatic loading system Manual unloading table 6 m with conveyer Durma cloud license Lasersources with 4 or 6 kW on request

Condition: used, Year of construction: 2022, operating hours: 37 h, power: 60 kW (81.58 HP), next inspection (TÜV): 02/2025, Equipment: ABS, air conditioning, all wheel drive, cabin, front linkage, * EZ: 02/2023 * Compressed air supply system, two lines * Front loader with 3rd + 4th hydraulic working circuit * Load sensing * System with variable displacement pump * Comfort seat with air suspension * 38 mm automatic trailer coupling Egytfp92C * Swivel mudguards * Power Setting 2 * Front axle suspension Subject to errors and prior sale Viewing only possible by appointment