Used Weiss Wg200 for sale (134)

Year of construction: 2021, condition: like new (used), WeissTechnik ClimeEvent C/180/70a/3 climatic chamber – year 2021 – EXCELLENT CONDITION For sale: a professional WeissTechnik ClimeEvent C/180/70a/3 climatic chamber, manufactured in Germany in 2021. The unit is in excellent technical and visual condition. It has only been used a few times, so it shows minimal signs of wear. The chamber was purchased from an official Polish distributor and has been serviced regularly. Key information: * Year of manufacture: 2021 * Used only a few times * Technical and visual condition: EXCELLENT * Unit is 100% functional * Regularly serviced * Purchased from an official distributor in Poland * German production – high quality and reliability Technical specifications: * Manufacturer: Weiss Technik * Series: ClimeEvent * Model: C/180/70a/3 * Year of manufacture: 2021 * Chamber volume: 180 liters * Temperature range: from -70°C to +180°C * Relative humidity control: typically from 10% to 98% RH * Rated current: 15 A * Rated power: 5.3 kW * Power supply: 3/N/PE AC 400 V * Country of manufacture: Germany Temperature and humidity control The WeissTechnik ClimeEvent climatic chamber enables precise environmental testing under controlled temperature and humidity conditions. The humidity control system allows for simulating various climatic conditions, including high-humidity environments, which makes it possible to test the resistance of materials, electronic components, and finished products. Possible applications: * Climatic and environmental testing * Resistance testing to high and low temperatures * Testing under high-humidity conditions * Material aging studies * Testing of electronic components Fpjdoz Tzvvjpfx Actop * Quality control in industry * Laboratory and research & development (R&D) studies Condition of the unit The chamber has been used sporadically and is in excellent condition. It represents an attractive alternative to purchasing a new unit, offering professional research capabilities at a significantly lower cost. The unit is fully functional and ready for further use.

Condition: ready for operation (used), WEISS 168928B-001 spindle, used, normal signs of wear, 100% functional, delivery contents as shown in photos. ATTENTION: Please enquire for charges for packing and transport separately! Fpsdpfjz Adkvsx Actop

Condition: ready for operation (used), WEISS 168928B-002 spindle, used, with normal signs of wear, 100% functional, delivery contents as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Fjdez Adk Aspfx Actjpp

Condition: used, Year of construction: 2020, operating hours: 21,398 h, machine/vehicle number: IntNr231185, EMAG WEISS W11 CNC SL650 – Universal Cylindrical Grinding Machine – Year of Construction: 2020 For sale is a used EMAG WEISS W11 CNC SL650 – a high-performance universal cylindrical grinding machine with CNC control. This machine is ideally suited for demanding grinding operations on individual parts, prototypes, and small to medium production runs. Machine Specifications Manufacturer: EMAG WEISS Type: W11-CNC SL650 Year of Construction: 2020 Operating Hours: Approx. 8,850 spindle hours / approx. 22,000 power-on hours Condition: Used, well-maintained, ready for immediate operation Technical Data Control: CNC-controlled (e.g., Heidenhain / Siemens / Fanuc – depending on the configuration) Max. Grinding Length: 650 mm (between centers) Center Height: Approx. 200 mm External Grinding Diameter: Up to approx. 390 mm Max. Workpiece Weight (overhanging): Approx. 100 kg (MK4) Max. Workpiece Weight (between centers): Approx. 250 kg X-Axis Traverse: Approx. 380 mm Z-Axis Traverse: Approx. 1,150 mm Grinding Wheel Diameter: 400 – 500 mm depending on equipment Rated Power: 9 – 11 kW (approx. 12 – 15 hp) Peripheral Speed: 20 – 50 m/s Equipment and Performance Features CNC touchscreen operation with Windows-based interface – user-friendly programming via dialogue or DIN/ISO (optional) Two-in-one concept: The machine can be operated both conventionally and CNC-controlled. Fpsdpfx Acs Ahq Sbotop High-precision linear and ball screw guides for high accuracy Direct measuring system (glass scales) (optional on many machines) Automatic dressing of the grinding wheel with compensation Crash control & gap monitoring for machine and process safety Coolant system, emulsion separator, and chip conveyor available (depending on equipment) Preparation for automation / robot interface possible The machine can be inspected in operation by appointment. Subject to changes and errors in technical data and specifications as well as prior sale!

Year of construction: 2021, condition: good (used), • Manufacturer: Weiss Technik GmbH • Model: HeatEvent F 60/90 (Basic Line) • Year of manufacture: 2021 • Maximum temperature: 220 °C • Usable volume: 324 liters • Internal dimensions (usable space): approx. 600 mm (W) x 900 mm (H) x 600 mm (D) • Control: Touchscreen interface • Safety standard: Compliant with DIN EN 1539 (drying of flammable materials) • Connection: 400 V (3~/N/PE AC 50 Hz) Fodpfs Agfinjx Actopp • Weight: approx. 350 kg

Condition: used, Year of construction: 2002, Power 18.5 kW Rotor 600 mm Fodpfxs Afhk Ao Actjpp Opening 100cm/100cm Hours : 2677 380 V

Condition: used, Rotary table, welding positioner, Used Machine Manufacturer: Weiss GMBH Type: TC 320-06 Fods Ahyn Sjpfx Actspp Overall Dimensions: Width: 1010 mm Depth: 1010 mm Height: 1000 mm Electrical Data: 400V, 0.7A Table Size: Ø 1010 mm

Condition: excellent (used), functionality: fully functional, 1. Mawera PS silo discharge system, in very good condition. 2. Weiss silo discharge system with chain. Year of manufacture: 1989, very robust design. Already dismantled. Arm length: 3 m. Motor: 5 kW. 3. Mawera SST hydraulic silo discharge system with 2 push rods, length: 14.5 m / piece. With hydraulic cylinders, unit, documentation, etc. The Mawera SST two-beam, hydraulically operated discharge system is used for the uniform and continuous discharge of wood chips from a rectangular silo. The slides or shovels move the material in alternating strokes to feed the boiler. Silo length: • Design with 12 slides: 14.50 m Internal width of the silo: 4.24 m Shovel blade width: 900 mm, shovel depth: 250 mm, shovel height: 70 mm Fpodjzv Eiaopfx Actsp 4. Mawera RSS spring arm silo discharge system: Design: Rotating silo discharge system with spring arms. Application area: Discharge of wood chips, wood shavings, sawdust, and biomass fuels. The rotating arms located on the silo floor convey the fuel to the central discharge point. Outlet: Central discharge opening / transition to a further conveying system.

Condition: excellent (used), We are offering a Weiss climate test chamber with humidity control! The chamber was serviced by Weiss/Vötsch as recently as December 2020. All tests were performed, and we conducted an additional test run on-site; humidity and temperature levels were verified using calibrated instruments. The chamber has undergone annual inspections and is in impeccable condition! The logbook is included. WEISS 1500SB/010JU/40DU Fpsdpfszn U A Tex Actop Temperature range: -40°C to +180°C Humidity: 15% to 95% Climate operation: +10°C to +95°C Test chamber volume: 1,500 liters Internal dimensions: 1,490 mm deep, 1,100 mm wide, 945 mm high External dimensions: 2,470 mm wide, 2,000 mm high, 1,450 mm deep Weight: approx. 1,100 kg Refrigerant: R404a (2.00 kg) The unit does not have feet and stands securely on a frame. Please feel free to contact us if you have any further questions!

Condition: used, Weiss climate testing chamber with seat pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test chamber: Material: Stainless steel Dimensions Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Volume: 1440 liters Outer housing Material: Double-coated Zincor sheet Dimensions Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paint: light gray (RAL 9002) Door, double-leaf: hinged on the left and right Equipment: Passage through the floor and ceiling: 2 pieces each, nominal diameter 100 mm, for installing the pulsation table Passage in the side walls: 1 piece each, left, right, 100 mm Refrigeration unit: air-cooled Control: Digital measuring and control system DMR Basic control panel: integrated in the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS-Windows Fsdpfexbgrgex Actepp Performance data: Temperature range without climate control: +20...+100 °C Temperature stability without climate control: +0.2 … ±0.5 K (time-dependent) depending on the range, in the stable state Temperature range with climate control: 20...+95 °C Temperature stability with climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the stable state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH, depending on the range, in the stable state Temperature change rate measured in the outlet without test specimen and without load - Cooling: 0.5 K/min on average, between +100 and +20 °C - Heating: 0.5 K/min on average, between +20 and +100 °C The performance data refer to an ambient temperature of max. +25 °C and the specified rated voltage. For proper operation of the system, the ambient temperature must be between +10 and +35 °C. Connections / Other Protection class: IP 32 for the control cabinet Sound pressure level during free-field measurement at a distance of 1 m in front of the device: 60 dB (A) Humidification water: fully demineralized, conductivity max. 20 μS/cm, pH value 6 - 7, automatic replenishment Condensate drain: backpressure-free, 3/4" hose connection Mains connection: 400 V; 3 PH+N PE; 50 Hz Connection value: max. 10 kVA Weight: approx. 1160 kg Seat testing device with steel structure for mounting and securing to the climate testing chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for test specimen changeover, 12 weights each with 5 kg • 1 base frame in normal steel welded construction for fastening to the underside of the climate testing chamber. This frame is equipped with removable sheets on all sides and has 2 folding doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric disks with bearing and tachometer, 2 connecting rods, 2 ball guides • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for connecting the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for connecting the buttock simulation • 2 load rods, 600 mm long, made of stainless steel (The connection to the test specimen is not included in our price, but can be offered at a later date after a precise definition.) • 2 three-phase motors, 2 belt drives with tensioning devices • 1 pneumatic control with 2 hand valves, a filter-regulator unit and a shut-off valve, 1 electrical control cabinet with 2 SEW frequency inverters, hand switch, emergency stop button, 2 push buttons, 2 release buttons, 2 speed indicators, 2 potentio

Condition: used, Year of construction: 2014, grinding diameter 100 mm grinding length 400 mm centre height 100 mm Fedpfx Acoy Rah Aotepp z-axis 425 mm table speed -stepless- 0,05 - 5,00 m/min workpiece spindle head rotation speed 90 - 1.000 U / min. grinding head swivelling -2 - +30 Grad tailstock quill taper MT 3 grinding wheel speeds 1.800 / 2.000 U/min grinding motor 3,70 kW dimensions of grinding wheel 350 x 50 x 127 mm total power requirement 7,00 kW weight of the machine ca. 2,50 t dimensions of the machine ca. 3,00 x 2,50 x H2,20 m With 2-axis digital display FAGOR, coolant device

Condition: used, Year of construction: 2020, grinding diameter 390 mm grinding length 650 mm centre height 200 mm workpiece weight max. 250 kg x-axis 380 mm z-axis 1150 mm sanding disc diameter 400 mm peripheral speed 20-50 m/sec workpiece spindle stepless 1 - 650 U/min tailstock quill taper MT 4 Fpedpfex Rn Uqox Actsp quill stroke 45 mm dia. of quill 50 mm total power requirement 22 kW

Condition: used, WEISS TECHNIK Temperature Test Chamber Weiss WT 450/70 Fpjdpfxs Aipk So Actop Temperature range -70 °C to +180 °C according to the current data sheet 450 liter test chamber volume / Air-cooled For sale is a used temperature test chamber from the manufacturer Weiss Technik. Suitable for temperature tests, environmental simulation, material and component testing, as well as quality assurance. Technical data: Manufacturer: Weiss Technik Type: WT 450/70 Device type: Temperature test chamber Test chamber volume: 450 liters Cooling: air-cooled Temperature data according to the current manufacturer's data sheet: Temperature range: -70 °C to +180 °C Heating rate: 4.0 K/min Cooling rate: 2.5 K/min Maximum heat compensation: 3,000 W Speeds according to IEC 60068-3-5 Internal dimensions (W × D × H): 800 × 700 × 800 mm Transport dimensions (W × D × H): 1,190 × 1,310 × 1,950 mm Power connection according to manufacturer's data sheet: 1P+N+PE / 230 V AC / 16 A Ethernet interface Further details from a previous sales advertisement: Rated power: 1.5 kW Rated current: 9.2 A Refrigerant: R404A and R23 Weight: approx. 310 kg Details to be verified against the nameplate. Equipment: Test chamber with 450 liter volume Cable entry on the right, Ø 50 mm Air-cooled version Ethernet interface Accessories as shown in the pictures Application areas: Temperature tests Material and component testing Electronics and component testing Research and development Quality assurance Scope of delivery: 1 × Weiss WT 450/70 temperature test chamber Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered test and climate systems in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Other items not explicitly mentioned are not included in the sale. Shipping or freight transport possible. Subject to change, errors and prior sale. We are happy to answer any further questions by phone.

Condition: used, External dimensions (L x W x H) 3,000 x 850 mm x 1,970 mm, Internal dimensions (L x W x H) 1,990 x 750 mm x 1,400 mm, Fedjz Eup Espfx Actspp Usable area 1.5 m², Growth height 1.4 m, Temperature range from approximately 5°C to +45°C, Adjustable humidity from 40% to 95%, 2 units in stock.

Condition: used, Vötschtechnik Climate chamber / Temperature chamber Fedo Af Ig Aepfx Actjpp Vötschtechnik ClimeEvent C/480/70/15 Temperature and climate chamber, water-cooled Approx. 480 liters / -72 °C to +180 °C / 10 to 98 % RH For sale is a used climate chamber from Vötschtechnik GmbH. The test chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development, aging, and stress tests. The integrated touchscreen control allows temperature and humidity profiles and automatic test programs to be created and executed. Existing test programs include tests according to IEC 60068, among others. Technical data Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/480/70/15 Device type: Climate chamber / Temperature chamber Test chamber volume: approx. 480 liters Country of manufacture: Germany Temperature range: -72 °C to +180 °C Temperature change rate heating: approx. 17 K/min Temperature change rate cooling: approx. 21 K/min Max. heat compensation at +20 °C: approx. 8,000 W Temperature homogeneity spatially: ±0.5 to ±2 K Temperature gradient up to +180 °C: ≤2 K Climate range temperature: +10 °C to +95 °C Dew point range: +4 °C to +94 °C -3 °C to +4 °C discontinuous Humidity range: 10 to 98 % RH Humidity deviation over time: approx. ±1 to ±3 % RH Temperature deviation over time in climate operation: ±0.1 to ±0.3 K Temperature homogeneity spatially in climate operation: ±0.5 to ±1 K Refrigerant: R449A / R23 Refrigerant quantity: 4.00 kg / 2.30 kg GWP: 1,397 / 14,800 CO₂ equivalent: 5.59 t / 34.04 t Max. operating pressure ND/HD: 19 / 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 24 kW Rated current: 43 A Cooling Water-cooled design Cooling water supply and cooling water return available Connection for demineralized water Overflow and condensate drain Dimensions and weight Test chamber volume: approx. 480 liters External dimensions according to installation plan (W × D × H): approx. 2,807 × 1,000 × 2,020 mm Transport dimensions with overhangs (L × W): approx. 2,857 × 1,115 mm Weight according to series documentation: approx. 1,350 kg Equipment Touchscreen control / WEBPanel Program and manual test operation Temperature and humidity control Stainless steel interior Large viewing window Test chamber lighting Several shelves / insertion levels Water-cooled design Side test chamber openings Safety temperature limiter RS232 interface RS485 / RS422 interfaces USB interface Status, alarm and maintenance display Operating hour counter Program management and reporting function Areas of application Temperature testing Climate testing Environmental simulation Humidity testing Material testing Electronics testing Component testing Quality assurance Research and development Aging and stress tests Condition Used Workshop inspected Optical condition according to pictures Scope of supply 1x Vötschtechnik ClimeEvent C/480/70/15 climate chamber Shelves according to pictures Existing documentation / operating manual Accessories according to pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or forwarding possible. Subject to changes, errors and prior sale.

Condition: excellent (used), CATALOGUE NUMBER: 6943 TECHNICAL DATA - Loading hopper inlet: 1600x1500mm - Rotor working width: 1500mm - Main engine: 45kW - Pump engine: 5.5kW Fedpszrna Hofx Actepp - Number of knives: 44 pcs - Knife dimensions: 50x50mm - Screen size: 59mm - Pressing drawer - Auto-reverse - Dimensions (L/W/H): 3430x2800x2850mm - Weight: approximately 9000kg ADVANTAGES - Made in France - New knives installed - Auto-reverse - Pressing drawer - Very good condition - Used shredder Net price: 129,900 PLN Net price: 30,209 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: used, Weiss   Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled   Item description:   For sale is a Weiss Technik TS 60 thermal shock test chamber. The chamber is ideally suited for rapid temperature cycling tests (e.g., according to IEC, MIL-STD, JEDEC) and has been well maintained.   Volume & Internal Dimensions:   Test volume: 60 liters   Internal dimensions of basket / test chamber (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm   Temperature ranges & cycling   Hot chamber +50 °C to +220 °C Cold chamber −72 °C to +70 °C   Transfer time (basket between both zones): < 10 seconds   Heating rate / heating speed up to 17 °C/min Cooling rate / cooling speed up to 3.7 °C/min   In single mode (cold zone only), heating rate: approx. 3.2 °C/min   Temperature deviation & homogeneity   Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C   Load / payload & lifting system   Basket / lifting system load: 20 kg maximum load capacity Transfer basket secured by protective grilles on all sides   Other features & equipment   Noise level: approx. 58 dB(A) during operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces   Electrical connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power approx. 8.5 kW Rated current approx. 25 A Fuse on customer's side 32 A Refrigerant R-404A / R-23   Weight: 800 kg   For your safety as a buyer, please note the following:   The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run.   Condition: used   Scope of delivery: (See image) Fsdpozii A Rofx Actopp   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2016, We offer here a used rotary indexing table of the brand Weiss. Fpjdpfjni Awpex Actjp The turntable has a load capacity of approx. 30 tons and a diameter of approx. 3.5m as well as a dead weight with motor of approx. 6500Kg. The control of the turntable is also available, with SEW frequency converter, braking resistor etc.. All documentation is available.

Year of construction: 2013, condition: used, Designation: Plant Growth Chamber Manufacturer: Weiss Technik / Vötsch Fpedpfx Acsyu Svlotjp Model: SGC120 Usable Volume: nominal 1,200 liters Interior Dimensions: 1310 x 675 x 1410 mm (W/D/H) External Dimensions: 1440 x 810 x 1975 mm (W/D/H) The Fitotron SGC 120 from Weiss Technik is a highly flexible plant growth chamber designed specifically for Arabidopsis cultivation, insect incubation, and tissue culture. It offers maximum usable area with minimal space requirements. Climatic conditions: Temperature range: Precisely controllable for day and night cycles via a color touch panel. Humidity: Optional humidification up to 80% relative humidity (RH) possible. Dehumidification: For seed storage, the system can reduce humidity to as low as 15% RH at 4°C. Usable Volume: The chamber has a nominal volume of approx. 1,200 liters. Maximum Growth Height: Without shelves, the maximum growth height is up to 1,275 mm (depending on the specific LED or lamp configuration). Footprint: With a depth of just 810 mm, the unit fits through standard laboratory doors and requires only minimal floor space. Item condition: Used item as shown in the pictures. Please contact us if you have any questions.

Year of construction: 2001, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 58226018400020, Weiss Temperature Chamber Type: WT11-270/70/10 Section No.: 58226018400020 Control: Simcon/32-NET Version: 00.1902 Ports: Left (2x) NW 50 mm, Right (3x) NW 125 mm Temperature Range: -70°C to 180°C Test Chamber Volume: 270 liters Door with window, interior lighting Water-cooled temperature chamber Compressed air dryer type: ZANDER Temperature change rate cooling: 10 K/min Temperature change rate heating: 10.0 K/min Temperature deviation over time ± 0.1 to ± 0.5 K Temperature homogeneity over space ± 0.5 to ± 2.0 K Test Chamber Dimensions: Width 580 mm x Depth 615 mm x Height 750 mm Housing dimensions: Width 895 mm x Depth 2080 mm x Height 1950 mm Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 14 kW, Rated current 26 A Fsdpfx Aev T Tncectepp Refrigerant: R-404A/R-23

Condition: used, Year of construction: 2008, Here are some key details: - CNC universal cylindrical grinding machine WUG 21 base machine by CNC-Technik Weiss. (The WUG 21 features a Karstens machine bed on which the CNC system is mounted.) - Year of manufacture: 2008 / operated in single-shift use only - 1000 mm between centers - Workpiece spindle headstock and tailstock MK4 - Wheel diameter up to 500 mm - Wheel mounting at a 26.5° angle - Grinding wheel drive with programmable SUG - Grinding spindle headstock manually swivellable on air cushion - Wheel positioned on the right - Internal grinding attachment mounted at the rear, including dressing device - Eckelmann control system - DIN programming - Cycle programs - Manual grinding: yes Fodpfx Acjxmurxotjpp - Automatic dressing - Marposs acoustic emission monitoring for external grinding wheel, including software package - Grinding wheel spindle and workpiece spindle driven by V-belt drive

Condition: used, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), Fodpfx Acsyi Ezkjtspp - Plate conveyors and control panels. The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, In the Powder applicator it consists of a hopper and a vibrator feeder, that spreads out the granulate in an 130 cm and even coating Fpodpfsx R N Urjx Actop over the printed transfer paper on the under laying conveyer 140 cm wide net belt, 150 cm long. The machine is height adjustable 88-100 cm and has the total length 150 cm. The powder feeder as well as the conveyor are both individually adjustable for optimal processing. Excess powder is effectively removed by a combination of airstreams, scatter mechanism and brushing. The silent automatic self-cleaning filter system recycle the granulate back to the hopper for re-processing and exhausts filtered air. In order to minimise the influence of static electricity there is two antistatic bars across the conveyor.

Condition: like new (used), Year of construction: 2021, WEISS Ltd. used / tested CR heavy duty table with servo amplifier B&R 8V1180.00-2 EXTREME LOADABLE, FOR HORIZONTAL AND VERTICAL 585Kg axial runout : 0,02 mm Radial runout : 0,02 mm Center opening : 346 mm max. dynamic axial force : 70000 N B&R: 8V1180.00-2 Modular mechanical design by plug-in modules Integrated mains filter Integrated or optional external braking resistor All connections in pluggable design Fpedpfx Aopa Nz Doctsp Integrated electronic restart interlock ACOPOS servo drive, 3x 400-480 V, 19 A, 9 kW, line filter, braking resistor, DC link power supply and electronic safe restart interlock integrated

Condition: used, Weiss Type: SWT 600/800-S Spray Water Test Unit for IP protection tests IPX1 / IPX2 / IPX3 / IPX4 / IPX4K / IPX9K For sale is a professional spray water test unit from Weiss Umwelttechnik GmbH. The unit is used to perform standardized water, spray water, and ingress protection tests on components, housings, electronic components, vehicle parts, and technical products. Suitable for industry, automotive, electronics, quality assurance, development, testing laboratories, as well as research and material testing. Operation is via an integrated touch panel. Test sequences can be automated. The unit features a stainless steel test chamber, rotating test table, swivel arm, water circulation, and available test accessories. Technical data according to the nameplate / documentation: Electrical data: Voltage: 3/N/PE AC 400 V ±10 % Frequency: 50 Hz Rated power: 17 kW Rated current: 30 A Wiring diagram No.: 82962 CE marking available Water connection according to documentation: Water inlet: R 3/4" Water outlet: R 1 1/4" Water pressure supply line: approx. 2 – 6 bar Water pressure IPX9K: adjustable approx. 80 – 100 bar Turntable speed: approx. 1 to 5 RPM Swivel speed: approx. 60 °/s Permissible ambient temperature according to documentation: approx. 10 °C to 35 °C Dimensions and weight: Test chamber SWT 600/800: approx. 2350 x 2400 x 2650 mm with hinges and door lock Test chamber without hinges and door lock: approx. 2350 x 2400 x 1850 mm Weight of the test chamber: approx. 650 kg High-pressure unit: approx. 850 x 1200 x 800 mm Weight of the high-pressure unit: approx. 380 kg Total weight according to available data: approx. 1030 kg Noise level according to documentation: approx. 88 dB(A) Heat dissipation to the environment: average approx. 1 kW maximum approx. 3.5 kW Equipment: Touch panel Stainless steel test chamber Rotating test table Swivel arm Water circulation pump Nozzle ring / spray ring High-pressure unit Flow meter ESD earthing point CE marking Robust industrial design Available documentation: Operating manual EC declaration of conformity Quality test certificate Technical documentation as shown in the pictures Accessories include, among others, as shown in the pictures: Various spray and test components Nozzle ring / spray ring Swivel arm accessories Flow meter Connection components Tools / keys Fedpfx Aozachcoctopp Test accessories Documentation and documents Inspection and testing on site is possible and desired after prior appointment. Scope of delivery: Weiss Umwelttechnik SWT 600/800-S Spray Water Test Unit High-pressure unit Turntable / swivel arm Test and spray accessories as shown in the pictures Operating manual / documentation Accessories and components as shown in the pictures Condition: Used Optical condition see pictures Scope of delivery as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale We will be happy to answer any further questions by telephone.