Used Weiss Wm330A for sale (134)

Year of construction: 2021, condition: like new (used), WeissTechnik ClimeEvent C/180/70a/3 climatic chamber – year 2021 – EXCELLENT CONDITION For sale: a professional WeissTechnik ClimeEvent C/180/70a/3 climatic chamber, manufactured in Germany in 2021. The unit is in excellent technical and visual condition. It has only been used a few times, so it shows minimal signs of wear. The chamber was purchased from an official Polish distributor and has been serviced regularly. Key information: * Year of manufacture: 2021 * Used only a few times * Technical and visual condition: EXCELLENT Hedsz Tzvvopfx Abajw * Unit is 100% functional * Regularly serviced * Purchased from an official distributor in Poland * German production – high quality and reliability Technical specifications: * Manufacturer: Weiss Technik * Series: ClimeEvent * Model: C/180/70a/3 * Year of manufacture: 2021 * Chamber volume: 180 liters * Temperature range: from -70°C to +180°C * Relative humidity control: typically from 10% to 98% RH * Rated current: 15 A * Rated power: 5.3 kW * Power supply: 3/N/PE AC 400 V * Country of manufacture: Germany Temperature and humidity control The WeissTechnik ClimeEvent climatic chamber enables precise environmental testing under controlled temperature and humidity conditions. The humidity control system allows for simulating various climatic conditions, including high-humidity environments, which makes it possible to test the resistance of materials, electronic components, and finished products. Possible applications: * Climatic and environmental testing * Resistance testing to high and low temperatures * Testing under high-humidity conditions * Material aging studies * Testing of electronic components * Quality control in industry * Laboratory and research & development (R&D) studies Condition of the unit The chamber has been used sporadically and is in excellent condition. It represents an attractive alternative to purchasing a new unit, offering professional research capabilities at a significantly lower cost. The unit is fully functional and ready for further use.

Condition: ready for operation (used), WEISS 168928B-001 spindle, used, normal signs of wear, 100% functional, delivery contents as shown in photos. ATTENTION: Please enquire for charges for packing and transport separately! Hsdpfxez Adkvj Abaow

Condition: ready for operation (used), WEISS 168928B-002 spindle, used, with normal signs of wear, 100% functional, delivery contents as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Hjdpfx Asz Adk Aobaow

Year of construction: 2021, condition: good (used), • Manufacturer: Weiss Technik GmbH • Model: HeatEvent F 60/90 (Basic Line) • Year of manufacture: 2021 • Maximum temperature: 220 °C • Usable volume: 324 liters • Internal dimensions (usable space): approx. 600 mm (W) x 900 mm (H) x 600 mm (D) Hsdps Agfinsfx Abasw • Control: Touchscreen interface • Safety standard: Compliant with DIN EN 1539 (drying of flammable materials) • Connection: 400 V (3~/N/PE AC 50 Hz) • Weight: approx. 350 kg

Condition: used, Year of construction: 2002, Power 18.5 kW Rotor 600 mm Hjdpfx Aj Afhk Asbasw Opening 100cm/100cm Hours : 2677 380 V

Condition: used, WEISS TECHNIK Weiss Technik WK1-180/70 Climate Test Chamber, Temperature Test Chamber – -70 to +180 °C – 5.5 kW Weiss Technik WK1-180/70 Climate and temperature test chamber with a stainless steel test chamber, digital control panel, and a temperature range of -70 to +180 °C. For sale is a used climate test chamber from the manufacturer Weiss Umwelttechnik GmbH. This device is suitable for temperature and climate testing of components, assemblies, and industrial products. Hsdpfx Abj Agmfnjaew The temperature range extends from a minimum of -70 °C to a maximum of +180 °C. The test chamber features a stainless steel test chamber, an insulated door with a viewing window, and a digital control panel. Lateral cable entries allow for the connection of measuring cables during testing. Technical data: Manufacturer: Weiss Umwelttechnik GmbH / Weiss Technik Model: WK1-180/70 Product type: Climate and temperature test chamber Device no.: 58226012250020 Material no.: 67609071 Temperature range: -70 to +180 °C Operating hours according to display: 45,555.3 h Permissible operating overpressure: 25 bar Test chamber volume: approx. 190 liters Electrical data: Voltage supply: 3/N/PE AC 400 V ± 10 % Mains frequency: 50 Hz Rated power: 5.5 kW Rated current: 12 A Refrigerant: R404A: 2.3 kg R23: 0.8 kg Equipment: Digital control and operating panel Stainless steel test chamber with insert grid Insulated test chamber door with viewing window Interior lighting Circulation fan Lateral cable entries Cable entries: Measured diameters: approx. 57.69 mm approx. 87.23 mm approx. 132.42 mm Scope of supply: 1 × Weiss Technik WK1-180/70 Climate Test Chamber with integrated control panel and insert grid as shown in the picture. The sale is made in the condition shown. Condition: Used Signs of wear and tear due to age and use. Condition and scope of supply see pictures. Tools, machines, and other items not explicitly mentioned are not included in the sale. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, WEISS Weiss WK3-1000/70 climate testing chamber with temperature and humidity control – 990 liters – -70 to +180 °C Weiss WK3-1000/70 Air-cooled climate and temperature testing chamber with touch panel, 990 liters test chamber volume, and a temperature range of -70 to +180 °C For sale is a Weiss climate testing chamber, type WK3-1000/70, with temperature and humidity control. The unit is suitable for temperature and climate testing of components, assemblies, and industrial products. The integrated touch panel allows for setting and monitoring temperature, humidity, and test programs. Technical data: Manufacturer: Weiss Type: WK3-1000/70 Product type: Climate and temperature testing chamber Serial number: 59226115080010 Test chamber volume: approx. 990 liters Cooling: Air-cooled Operation: Touch panel Weight: approx. 955 kg Test chamber dimensions: Height: 950 mm Width: 1,100 mm Depth: 950 mm External dimensions: Height: approx. 2,000 mm Width: 1,415 mm Depth: 2,105 mm Data for temperature testing: Temperature range: -70 to +180 °C Heating rate: approx. 4.0 K/min Cooling rate: approx. 2.5 K/min Data for climate testing: Temperature range: +10 to +95 °C Humidity range: 10 to 98 % relative humidity Electrical data: Rated voltage: 3/N/PE AC 400 V ± 10 % Mains frequency: 50 Hz Rated current: 29 A Rated power: 13.8 kW Refrigerant: R404A: 4.6 kg R23: 1.2 kg Equipment: Touch panel for operation and program control Test chamber made of stainless steel Viewing window with lighting Air circulation system with fans Insert shelf Side openings: approx. 50 mm and 130 mm Communication interfaces Testing: The climate testing chamber has been tested. Heating, cooling, and humidity functions have been checked. Scope of delivery: 1 × Weiss WK3-1000/70 climate testing chamber with integrated equipment and insert shelf Scope of delivery as shown in the pictures. Condition: Used The unit has been tested. Hjds Aghkuspfx Abajw Condition and scope of delivery, see pictures. Tools, machines, and other items not explicitly mentioned are not part of the sale. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: new, WEISS 174282-014 spindle, dimensions see acceptance protocol, unused in opened original packaging, 100% functional, scope of delivery as per photos Hsdoz Adk Nopfx Abasw

Condition: used, Year of construction: 2020, operating hours: 21,398 h, machine/vehicle number: IntNr231185, EMAG WEISS W11 CNC SL650 – Universal Cylindrical Grinding Machine – Year of Construction: 2020 For sale is a used EMAG WEISS W11 CNC SL650 – a high-performance universal cylindrical grinding machine with CNC control. This machine is ideally suited for demanding grinding operations on individual parts, prototypes, and small to medium production runs. Machine Specifications Manufacturer: EMAG WEISS Type: W11-CNC SL650 Year of Construction: 2020 Operating Hours: Approx. 8,850 spindle hours / approx. 22,000 power-on hours Condition: Used, well-maintained, ready for immediate operation Technical Data Control: CNC-controlled (e.g., Heidenhain / Siemens / Fanuc – depending on the configuration) Max. Grinding Length: 650 mm (between centers) Center Height: Approx. 200 mm External Grinding Diameter: Up to approx. 390 mm Max. Workpiece Weight (overhanging): Approx. 100 kg (MK4) Max. Workpiece Weight (between centers): Approx. 250 kg X-Axis Traverse: Approx. 380 mm Z-Axis Traverse: Approx. 1,150 mm Grinding Wheel Diameter: 400 – 500 mm depending on equipment Rated Power: 9 – 11 kW (approx. 12 – 15 hp) Hedpjz E Rbdefx Abaew Peripheral Speed: 20 – 50 m/s Equipment and Performance Features CNC touchscreen operation with Windows-based interface – user-friendly programming via dialogue or DIN/ISO (optional) Two-in-one concept: The machine can be operated both conventionally and CNC-controlled. High-precision linear and ball screw guides for high accuracy Direct measuring system (glass scales) (optional on many machines) Automatic dressing of the grinding wheel with compensation Crash control & gap monitoring for machine and process safety Coolant system, emulsion separator, and chip conveyor available (depending on equipment) Preparation for automation / robot interface possible The machine can be inspected in operation by appointment. Subject to changes and errors in technical data and specifications as well as prior sale!

Condition: used, Weiss climate testing chamber with seat pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test chamber: Material: Stainless steel Dimensions Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Volume: 1440 liters Outer housing Material: Double-coated Zincor sheet Dimensions Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paint: light gray (RAL 9002) Door, double-leaf: hinged on the left and right Equipment: Passage through the floor and ceiling: 2 pieces each, nominal diameter 100 mm, for installing the pulsation table Passage in the side walls: 1 piece each, left, right, 100 mm Refrigeration unit: air-cooled Control: Digital measuring and control system DMR Basic control panel: integrated in the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS-Windows Performance data: Temperature range without climate control: +20...+100 °C Temperature stability without climate control: +0.2 … ±0.5 K (time-dependent) depending on the range, in the stable state Temperature range with climate control: 20...+95 °C Temperature stability with climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the stable state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH, depending on the range, in the stable state Temperature change rate measured in the outlet without test specimen and without load - Cooling: 0.5 K/min on average, between +100 and +20 °C - Heating: 0.5 K/min on average, between +20 and +100 °C The performance data refer to an ambient temperature of max. +25 °C and the specified rated voltage. For proper operation of the system, the ambient temperature must be between +10 and +35 °C. Connections / Other Protection class: IP 32 for the control cabinet Sound pressure level during free-field measurement at a distance of 1 m in front of the device: 60 dB (A) Humidification water: fully demineralized, conductivity max. 20 μS/cm, pH value 6 - 7, automatic replenishment Condensate drain: backpressure-free, 3/4" hose connection Mains connection: 400 V; 3 PH+N PE; 50 Hz Connection value: max. 10 kVA Weight: approx. 1160 kg Seat testing device with steel structure for mounting and securing to the climate testing chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for test specimen changeover, 12 weights each with 5 kg Hodpfx Aexbgrgsbaow • 1 base frame in normal steel welded construction for fastening to the underside of the climate testing chamber. This frame is equipped with removable sheets on all sides and has 2 folding doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric disks with bearing and tachometer, 2 connecting rods, 2 ball guides • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for connecting the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for connecting the buttock simulation • 2 load rods, 600 mm long, made of stainless steel (The connection to the test specimen is not included in our price, but can be offered at a later date after a precise definition.) • 2 three-phase motors, 2 belt drives with tensioning devices • 1 pneumatic control with 2 hand valves, a filter-regulator unit and a shut-off valve, 1 electrical control cabinet with 2 SEW frequency inverters, hand switch, emergency stop button, 2 push buttons, 2 release buttons, 2 speed indicators, 2 potentio

Condition: excellent (used), functionality: fully functional, 1. Mawera PS silo discharge system, in very good condition. Hedpfxjzv Eiao Abajw 2. Weiss silo discharge system with chain. Year of manufacture: 1989, very robust design. Already dismantled. Arm length: 3 m. Motor: 5 kW. 3. Mawera SST hydraulic silo discharge system with 2 push rods, length: 14.5 m / piece. With hydraulic cylinders, unit, documentation, etc. The Mawera SST two-beam, hydraulically operated discharge system is used for the uniform and continuous discharge of wood chips from a rectangular silo. The slides or shovels move the material in alternating strokes to feed the boiler. Silo length: • Design with 12 slides: 14.50 m Internal width of the silo: 4.24 m Shovel blade width: 900 mm, shovel depth: 250 mm, shovel height: 70 mm 4. Mawera RSS spring arm silo discharge system: Design: Rotating silo discharge system with spring arms. Application area: Discharge of wood chips, wood shavings, sawdust, and biomass fuels. The rotating arms located on the silo floor convey the fuel to the central discharge point. Outlet: Central discharge opening / transition to a further conveying system.

Condition: used, Year of construction: 2014, grinding diameter 100 mm grinding length 400 mm centre height 100 mm z-axis 425 mm table speed -stepless- 0,05 - 5,00 m/min workpiece spindle head rotation speed 90 - 1.000 U / min. grinding head swivelling -2 - +30 Grad tailstock quill taper MT 3 grinding wheel speeds 1.800 / 2.000 U/min grinding motor 3,70 kW dimensions of grinding wheel 350 x 50 x 127 mm total power requirement 7,00 kW weight of the machine ca. 2,50 t Hodpey Rah Asfx Abaew dimensions of the machine ca. 3,00 x 2,50 x H2,20 m With 2-axis digital display FAGOR, coolant device

Condition: excellent (used), We are offering a Weiss climate test chamber with humidity control! The chamber was serviced by Weiss/Vötsch as recently as December 2020. All tests were performed, and we conducted an additional test run on-site; humidity and temperature levels were verified using calibrated instruments. The chamber has undergone annual inspections and is in impeccable condition! The logbook is included. WEISS 1500SB/010JU/40DU Hsdozn U A Tjpfx Abaew Temperature range: -40°C to +180°C Humidity: 15% to 95% Climate operation: +10°C to +95°C Test chamber volume: 1,500 liters Internal dimensions: 1,490 mm deep, 1,100 mm wide, 945 mm high External dimensions: 2,470 mm wide, 2,000 mm high, 1,450 mm deep Weight: approx. 1,100 kg Refrigerant: R404a (2.00 kg) The unit does not have feet and stands securely on a frame. Please feel free to contact us if you have any further questions!

Condition: new, WEISS 5.5AZK 71L-4T B14P105 motor, serial number: 303194, unused, 100% functional, scope of delivery as per photos. Hodjy Sdu Aspfx Abaew

Condition: used, Weiss Type: WT 5.1'/ Mini-SHED for diurnal loss measurements Test chamber dimensions: Width 1600 mm x Depth 2140 mm x Height 2150 (usable 1600) mm Hsdozd Slkspfx Abasw Housing dimensions: Width 1760 mm x Depth 3100 mm x Height 2790 mm Maximum floor load: 250 kg Operating temperature range: +18 °C ... +45 °C (at higher temperatures, SHED operation is only possible without a Tedlar bag) Temperature range: +18 °C ... +45 °C Temperature stability: ≤ ±1 K (over time) Temperature change rate (heating and cooling): approx. 0.5 K/min, without test specimen Channel connection (air inlet and outlet): ∅ 80 mm, in the rear wall of the chamber Shut-off valve, gas-tight (air inlet and outlet): ∅ 80 mm, gas-tight, pneumatic operation. Delivery scope: Connection flange of the shut-off valve Cooling water consumption: approx. 0.8 m3/h Voltage: 230/400 V; 3 phases + N + PE; 50 Hz Rated power: 4.1 kW Rated current: 14.0 A Weight: approx. 2500 kg Type: WT 5.1'/ Condition: used Sale from current location Scope of delivery: (Only the Weiss emissions test chamber WT 5.1' + Mini-SHED) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2020, grinding diameter 390 mm grinding length 650 mm centre height 200 mm workpiece weight max. 250 kg Hsdpfex Rn Uqjx Abaow x-axis 380 mm z-axis 1150 mm sanding disc diameter 400 mm peripheral speed 20-50 m/sec workpiece spindle stepless 1 - 650 U/min tailstock quill taper MT 4 quill stroke 45 mm dia. of quill 50 mm total power requirement 22 kW

Condition: used, Weiss Type: TS 130 Weiss Temperature Shock Test Chamber, Air-Cooled (Compressor has been replaced!) Specifications: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Hot/cold chamber switching time: 10 s Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with swivel arm): without… approx. 1820 mm, with… approx. 1915 mm Hjdjzp D Axepfx Abajw Depth (without and with test chamber door): without… approx. 900 mm, with… approx. 1155 mm Dimensions of the lift basket (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. circuit breaker rating: 35 A (32 A CEE plug) Sound pressure level, 1 m in front of the unit: approx. 65 dB(A) Connection values: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Vötschtechnik Climate chamber / Temperature chamber Vötschtechnik ClimeEvent C/480/70/15 Temperature and climate chamber, water-cooled Approx. 480 liters / -72 °C to +180 °C / 10 to 98 % RH For sale is a used climate chamber from Vötschtechnik GmbH. The test chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development, aging, and stress tests. The integrated touchscreen control allows temperature and humidity profiles and automatic test programs to be created and executed. Existing test programs include tests according to IEC 60068, among others. Technical data Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/480/70/15 Device type: Climate chamber / Temperature chamber Test chamber volume: approx. 480 liters Country of manufacture: Germany Temperature range: -72 °C to +180 °C Temperature change rate heating: approx. 17 K/min Temperature change rate cooling: approx. 21 K/min Max. heat compensation at +20 °C: approx. 8,000 W Temperature homogeneity spatially: ±0.5 to ±2 K Temperature gradient up to +180 °C: ≤2 K Climate range temperature: +10 °C to +95 °C Dew point range: +4 °C to +94 °C -3 °C to +4 °C discontinuous Humidity range: 10 to 98 % RH Humidity deviation over time: approx. ±1 to ±3 % RH Temperature deviation over time in climate operation: ±0.1 to ±0.3 K Temperature homogeneity spatially in climate operation: ±0.5 to ±1 K Refrigerant: R449A / R23 Refrigerant quantity: 4.00 kg / 2.30 kg GWP: 1,397 / 14,800 CO₂ equivalent: 5.59 t / 34.04 t Max. operating pressure ND/HD: 19 / 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 24 kW Rated current: 43 A Cooling Water-cooled design Cooling water supply and cooling water return available Connection for demineralized water Hsds Af Ig Aspfx Abasw Overflow and condensate drain Dimensions and weight Test chamber volume: approx. 480 liters External dimensions according to installation plan (W × D × H): approx. 2,807 × 1,000 × 2,020 mm Transport dimensions with overhangs (L × W): approx. 2,857 × 1,115 mm Weight according to series documentation: approx. 1,350 kg Equipment Touchscreen control / WEBPanel Program and manual test operation Temperature and humidity control Stainless steel interior Large viewing window Test chamber lighting Several shelves / insertion levels Water-cooled design Side test chamber openings Safety temperature limiter RS232 interface RS485 / RS422 interfaces USB interface Status, alarm and maintenance display Operating hour counter Program management and reporting function Areas of application Temperature testing Climate testing Environmental simulation Humidity testing Material testing Electronics testing Component testing Quality assurance Research and development Aging and stress tests Condition Used Workshop inspected Optical condition according to pictures Scope of supply 1x Vötschtechnik ClimeEvent C/480/70/15 climate chamber Shelves according to pictures Existing documentation / operating manual Accessories according to pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or forwarding possible. Subject to changes, errors and prior sale.

Condition: used, External dimensions (L x W x H) 3,000 x 850 mm x 1,970 mm, Hodpfxsz Eup Ee Abajw Internal dimensions (L x W x H) 1,990 x 750 mm x 1,400 mm, Usable area 1.5 m², Growth height 1.4 m, Temperature range from approximately 5°C to +45°C, Adjustable humidity from 40% to 95%, 2 units in stock.

Condition: excellent (used), CATALOGUE NUMBER: 6943 TECHNICAL DATA - Loading hopper inlet: 1600x1500mm - Rotor working width: 1500mm - Main engine: 45kW - Pump engine: 5.5kW Hsdpfszrna Hsx Abaow - Number of knives: 44 pcs - Knife dimensions: 50x50mm - Screen size: 59mm - Pressing drawer - Auto-reverse - Dimensions (L/W/H): 3430x2800x2850mm - Weight: approximately 9000kg ADVANTAGES - Made in France - New knives installed - Auto-reverse - Pressing drawer - Very good condition - Used shredder Net price: 129,900 PLN Net price: 30,209 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Year of construction: 2013, condition: used, Designation: Plant Growth Chamber Manufacturer: Weiss Technik / Vötsch Model: SGC120 Usable Volume: nominal 1,200 liters Interior Dimensions: 1310 x 675 x 1410 mm (W/D/H) External Dimensions: 1440 x 810 x 1975 mm (W/D/H) The Fitotron SGC 120 from Weiss Technik is a highly flexible plant growth chamber designed specifically for Arabidopsis cultivation, insect incubation, and tissue culture. It offers maximum usable area with minimal space requirements. Climatic conditions: Temperature range: Precisely controllable for day and night cycles via a color touch panel. Humidity: Optional humidification up to 80% relative humidity (RH) possible. Dehumidification: For seed storage, the system can reduce humidity to as low as 15% RH at 4°C. Usable Volume: The chamber has a nominal volume of approx. 1,200 liters. Maximum Growth Height: Without shelves, the maximum growth height is up to 1,275 mm (depending on the specific LED or lamp configuration). Hsdpfxsyu Svlj Abasw Footprint: With a depth of just 810 mm, the unit fits through standard laboratory doors and requires only minimal floor space. Item condition: Used item as shown in the pictures. Please contact us if you have any questions.

Condition: used, Weiss Type: WT1-600/70 Weiss Temperature Test Chamber, Water-Cooled Technical Data: Test chamber designation: WT1-600/70 Hsdezd R Svepfx Abaew External dimensions (without hinges and door closure) Height 1980 mm, Width 1085 mm, Depth 1655 mm Internal dimensions Height 950 mm, Width 800 mm, Depth 800 mm Test chamber volume: approx. 600 liters Cold/heat operation: -70 to 180°C Temperature change per unit of time Cooling: approx. 2.5 K/min Heating: approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19 A Permissible weight of test specimens Total load on the shelf supports: 80 kg Refrigerant: R 404A + R23 Weight: 600 kg For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss   Type: WT-600/70   Weiss Temperature Test Chamber, Water-Cooled   Technical Data: Test chamber designation: WT-600/70   External dimensions with hinges and door closure Height 1995 mm, Width 1090 mm, Depth 1660 mm   External dimensions without hinges and door closure Height 1995 mm, Width 1000 mm, Depth 1660 mm   Internal dimensions:   Height 950 mm, Width 800 mm, Depth 800 mm   Test chamber volume: approx. 600 liters   Cooling / Heating operation -70°C to 180°C   Temperature change per unit of time Cooling down approx. 2.5 K/min Hodpfx Aszd R Drobaow Heating up approx. 4 K/min   3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19 A Fuse on customer side: 32 A, slow-blow Permissible test item weight Total load of the shelf supports 80kg   Test chamber floor 80kg, insert shelf 40kg   Refrigerant: R 404A/R23   Weight: 675 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss SC 1000/+20IU Corrosion Climate Change Test Chamber Weiss SC 1000/+20 JU Corrosion Climate Change Test Chamber The test system is a combination of a climate test cabinet with variable temperature and humidity and a corrosion test cabinet with a salt spray test. In a time-lapse sequence, susceptible metallic components are tested for corrosion according to the relevant standards. Temperature operating range: Temperature: +20 °C ... +60 °C Temporal temperature deviation: +0.5K Climate operating range: Temperature: +20 °C ... +60 °C Temporal temperature deviation: +0.5K Relative humidity: 10...98 % RH Temporal humidity deviation: 3...5% RH Dew point: +12 °C ... +59 °C Salt spray test SS (temperature range ambient temperature +5 K ... +50 °C) according to DIN 50 021 (salt spray via 2-nozzle diffuser, 1.5 x 0.5 m, 80 cm height) Control: Digital measurement and control system SIMCON/32*-Net with touch panel Interfaces: serial interface RS 232 C, parallel printer interface Operating modes adjustable via process controller: - Temperature operation - Climate operation - Salt spray test - Direct spraying with salt solution - Condensation load - Flushing of test chamber walls - Drying/ventilation of test chamber Temperature sensor: Pt 100 resistance thermometer Humidity sensor: psychrometric fresh measuring device TFT (with forced humidification) Technical data SC 1000/+20 JU Usable space dimensions: Height up to roof slope approx. 1000 mm + Roof approx. 350 mm Width approx. 1100 mm Width between heating elements approx. 1000 mm Depth approx. 1000 mm Test chamber door made of glass, left-hinged Height approx. 1350 mm Width approx. 1000 mm External dimensions including unit components and control cabinet Height approx. 2100 mm Width approx. 1450 mm Width with touch panel approx. 1700 mm Depth approx. 2600 mm Floor load max. 100 kg Brine storage tank approx. 200 l, with level monitoring, located separately beside/behind the unit Height approx. 1000 mm Width approx. 600 mm Depth approx. 900 mm Electrical connection: 400 V Connection power: 13 kW Weight: 1300 kg You can find more new and used items in our shop! International shipping costs on request! Hjdpeph U Dhjfx Abajw

Condition: used, Weiss   Type: WT1-340/30   Converted to R452a   Weiss temperature chamber, air-cooled   Temperature range: from -30°C to 180°C   Temperature change rate, cooling: 1.6 K/min Temperature change rate, heating: 2.1 K/min   Test chamber dimensions: Width 550 mm x Depth 750 mm x Height 800 mm Housing dimensions: Width 800 mm x Depth 1500 mm x Height 1800 mm   Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 4.9 kW, Rated current: 9 A   Refrigerant: R452a   Hodpfxszd Rw Se Abaow Weight: 515 kg   For your safety as a buyer, please note the following information:   The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have over the phone.