Used Ciata 245 S for sale (68,712)

Condition: good (used), Year of construction: 2010, CNC Milling / Turningcenter Machine type: Mazak Integrex 200 IV S Control: Mazatrol Matrix Year: 2010 Available after: Dezember 2026 SPECIFICATIONS Max. turning length: 995 mm Turningdiameter: 660 mm Bar capacity: 65 mm Spindle speeds: 35-5.000 rpm Spindle power: 22 kW 3-jaw chuck: Kitagawa BB-208 200 mm mm Subspindle 3-jaw chuck: Kitagawa BB-208 200 mm mm Lsdpjz A A Epefx Ai Rsag Travel X-Axis: 580 mm Y-Axis: 160 mm Z-Axis: 1.045 mm W-axes: 1.050 mm CNC-Spindle tilting for cutting and turningopertations Tool: Capto C6 Tool capacity: 40 revolution driven tools: 12.000 Equipment Chip conveyor Tool measurement Internal cooling: 15 bar

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Wide Belt Sander SCM Sandya S600 RCS 110 | Excellent Condition | Year of Manufacture 2015 For sale is a high-quality wide belt sander from SCM (Sandya S600 RCS 110) in very good condition. The machine is fully operational and ready for immediate use. Working width: 1,100 mm Working height: 4–170 mm Laedey Hn U Ajpfx Ai Rsg Main motor: 15 kW Belt speed: 3–16 m/s Feed speed: 3–18 m/min Belt length: 2,150 mm Steel calibration roller R (Ø 140 mm) Combination unit CS: Rubber roller (Ø 160 mm, 30 Sh) Electronic segmented pad (segment width 30 mm) Year of manufacture: 2015 Well maintained, technically flawless All information provided without guarantee. Technical data according to manufacturer or previous owner. Subject to errors, changes, and prior sale. No guarantee or warranty.

Condition: used, Year of construction: 2006, functionality: fully functional, The desiccant air dryer, model Card 40 S, from Ferratech is for sale. Lodszvulqjpfx Ai Roag Heating capacity: 1.1 kW Volume: 40 liters

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Condition: Well-maintained Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm Lajdozu T Smepfx Ai Rsg EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Sold on behalf of a customer! Technical data without guarantee!

Condition: used, Year of construction: 2010, machine/vehicle number: 1008801, The machine is designed for electro-resistance spot welding of gabion mesh panels. It can also be used for welding a new type of mesh; in this case, the welding points are reprogrammed. Wire diameter: 3-6mm Maximum mesh dimensions: approx. 2x2 m Operation of the welding machine is semi-automated. Wires are manually inserted on one side of the machine. After automatic welding, the finished mesh is manually removed, and new wires are inserted. Power supply: 400 V AC Machine dimensions: approx. 10.5 x 3 m Ljdpfx Ajzy Eq Sji Reag Location: In our workshop

Condition: good (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 210 mm, turning length: 1,000 mm, turning diameter: 330 mm, spindle bore: 40 mm, spindle speed (max.): 3,500 rpm, spindle motor power: 7 W, Equipment: documentation/manual, bj. 2000 Draailengte 1000 mm draaidiam. boven het bed 330 mm boven dwarsslede 210 mm Lengte tussen de centers 1000 mm Type besturing FANUC Spindel conisch Camlock D1-4 Spindel boring 40 mm Draaisnelheid max. 3500 rpm Vermogen van de spindelmotor 7.5 kW Lengte x breedte x hoogte 2100,0 × 1200,0 × 1600,0 Laedpfx Aiexd Aigs Rjg Gewicht 1200 kg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning length: 1,045 mm, spindle motor power: 18,500 W, spindle speed (max.): 6,000 rpm, spindle bore: 82 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 1,045 mm, total height: 2,900 mm, total length: 4,500 mm, total width: 2,400 mm, overall weight: 9,200 kg, Multi-tasking lathe MAZAK - INTEGREX 200-4 S MACH-ID 9810 Make: MAZAK Type: INTEGREX 200-4 S Control: MAZATROL MATRIX Year: 2010 The Mazak INTEGREX 200-IV S is a multi-tasking CNC turning and milling center with a second/sub-spindle. The “S” indicates the sub-spindle, allowing complete machining of both sides of a workpiece in a single setup. Typical specifications include a maximum machining diameter of approximately 660 mm, a machining length of around 995 mm, and X/Y/Z travels of approximately 580 / 160 / 1,045 mm. The machine features a B-axis milling head, a main spindle and sub-spindle up to approximately 5,000 rpm, and a milling spindle typically capable of 12,000 rpm. It normally uses Capto C6 tooling and is often equipped with a 40-position automatic tool changer. Machines manufactured around 2006–2010 are commonly equipped with the Mazatrol Matrix CNC control. The INTEGREX 200-IV S is designed for complete machining of complex components, combining turning, milling, drilling, tapping and 5-axis positioning in one machine. This significantly reduces the number of setups and eliminates the need to move components between separate turning and milling machines. Lodpfx Aiez Ar Ucj Rsag Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1045mm B Axis: 225° Spindle bore: 82mm Speedrange: 5000Rpm Spindle power: 18.5kW Subspindle speeds:6000Rpm Subspindle bore: 82mm Subspindle power:18.5kW ATC / revolver: 80 Speed live tools:12.000Rpm Length: 4500mm Width: 2400mm Height: 2900mm Weight: 9200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2020, functionality: fully functional, For sale is a WMF 5000-S-Plus fully automatic coffee machine. Ljdew S T Htopfx Ai Rjag The machine is sold with all accessories, as shown in the pictures. Viewings are possible at any time and with short notice, subject to prior appointment. VAT is shown separately!

Condition: used, Year of construction: 2012, machine/vehicle number: 7363126525, Item No. 26261 Hydraulic CNC Press Brake Technical data: - Pressing force 320 t - Working width 3050 mm - Distance between uprights 2550 mm - Overhang 460 mm - Installation height approx. 630 mm - Ram stroke 365 mm - Motor power approx. 37 kW - Space requirement approx. W 5700 x H 3250 x D 2450 mm - Weight approx. 17500 kg - Including: - Pivoting arm – control panel with control system CYBELEC EVA-10S; Y1 + Y2; X, R, Z - Motorized back gauge - Motorized crowning - Safety light curtain - Electric foot pedal Lasdpfx Aiezzzcmj Reg - 4-way universal die, split - V-dies - Split top tool set, various other tools

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 15 m/min, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, position of the milling head: osa A 105°+ osa B 90°, spindle speed (max.): 3,500 rpm, spindle speed (min.): 3,500 rpm, table width: 800 mm, table load: 8,500 kg, table length: 3,000 mm, table height: 1,000 mm, total height: 3,400 mm, total width: 4,360 mm, total length: 7,760 mm, type of input current: three-phase, rotational speed (max.): 3,500 rpm, workpiece weight (max.): 8,500 kg, overall weight: 18,000 kg, year of last overhaul: 2025, spindle motor power: 22,000 W, power: 22 kW (29.91 HP), Equipment: rotational speed infinitely variable, FSQ 80(100) S/A3 CNC - TOS KUŘIM Bed Milling Machine, Table Length 3m Control System: Heidenhain 415F Complete Mechanical Overhaul: 2024 Availability: IMMEDIATE DELIVERY Warranty: 6 months FSQ 80(100) O/A3 CNC – Technical Specifications: Basic machine data: Manufacturer: TOS Kuřim Overall length: 7,760 mm Overall width: 4,360 mm Overall height: 3,400 mm Total weight: 18,000 kg Total power consumption: 40 kVA Working range: Longitudinal travel X-axis: 3,000 mm Cross travel Y-axis: 1,000 mm Vertical travel Z-axis: 900 mm Spindle head (S Head): Max. power: 22 kW Speed range: 16 – 3,500 rpm Lasdpfjxp Dkcjx Ai Rog Number of speed ranges: stepless Spindle rotation around A-axis: 105° Spindle rotation around B-axis: 90° Feed range X – Y / Z: Number of speed ranges / range: stepless / 1 – 5,000 mm/min Rapid traverse Y – Z / X: 10,000 / 15,000 mm/min Table: Table area: 800 x 3,000 mm Max. load: 8,500 kg Control System: Heidenhain 415F Further details on request.

Condition: used, Year of construction: 2023, operating hours: 495 h, power: 186 kW (252.89 HP), maximum speed: 50 km/h, front tire size: 600/70 R30 | 0%, rear tire size: 710/70 R42 | 0%, tire size: 710/70 R42, number of beds: 43, Tires (front): 600/70 R30, Tires (rear): 710/70 R42, Operating hours: 495, First registration: 12/17/2024_____Price: 175,900.00 Euro net. Standard equipment/technical data: ENGINE: Maximum power 180/245 kW/hp (ISO 14396), Maximum torque 1100 Nm. Maximum power with power management 194/265 kW/hp, Maximum torque with power management 1178 Nm. 6 cylinders, 7.4l AGCO Power - 74 LFNT-5D, CR, 4V. Emission standard (DOC+SC+SCR) without exhaust gas recirculation, Stage 5. Electronic engine control with Vistronic fan control. Engine speed memory. Powercore engine air filter with coarse dirt pre-separation. EasyCare radiator package. Additional fuel pre-filter with water separator. 500-liter fuel tank. Ljdjvv Dp Njpfx Ai Rjag

Condition: good (used), Year of construction: 1987, functionality: fully functional, For sale: well-maintained REX ZA-800/S cutting machine, manufactured in 1987. The machine is fully functional and currently still in operation. It is in good condition and available immediately upon agreement. Ljdpjzux Hcofx Ai Roag

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, REF: MM6424 Lodpfjy Uni Nex Ai Rjag 1 x AL Tech UK Labelling Technologies Ltd high-performance 'print and apply' label applicator with infeed conveyor and Zebra ZE500 printer. Used to apply labels onto the short and long sides of pre-formed cardboard boxes. Manufacturer - ALTech UK Labelling Technologies Ltd. Model - ALritma S. Date of manufacture – 2020. Controls - 40 x programs, controlled by colour 4.3'' touch-screen. Label width - 20 mm to 107 mm wide. Speed - 50 m/minute. Electrical requirements - 110-230 V / 50-60 hz / 1 phase. Video available on request.

Condition: good (used), Year of construction: 2007, operating hours: 10,490 h, functionality: fully functional, Channel baling press Presto HPK 20/50 S, year of manufacture 2007 Manufacturer: Presto Type: HPK 20/50 S Lsdpfx Aiozvbbrs Rsag Year of manufacture: 2007 Operating hours: 10,490 (as of 08/2026) Drive: 22 kW Pressing force: 50 t Feed opening: 1200 x 700 mm (L x W) Channel cross-section: 700 x 750 mm Feed volume, max. 0.63 m³ Cycle time: 23 s Tying: 3-fold, automatic Throughput at 35 kg/cbm: 2.9 t/h 60 kg/cbm: 4.3 t/h 100 kg/cbm: 6.3 t/h Bale weight: up to 450 kg Machine dimensions: 6750 x 1350 x 2350 mm (L x W x H) Machine weight: approx. 7,500 kg Materials: Paper, cardboard, film Note: The press is in good condition and is currently still in operation. An inspection can be arranged. The machine will be available from the end of 2026. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections can be arranged. The sale is made with advance payment, ex works, without warranty.

Condition: used, mileage: 171,000 km, power: 331 kW (450.03 HP), first registration: 11/2017, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Mercedes Antos 3245 8x2 chassis * Euro 6c * Automatic transmission * Urban transport cab * Steerable on the 2nd and 4th axles * 4th axle lift axle Laodpfxjz Ddqpj Ai Rsg * Power take-off (PTO) * Air conditioning * Auxiliary heater * Refrigerator compartment * EFH (presumably a specific feature or component – further context needed for a precise translation)

Condition: good (used), Year of construction: 2007, Workpiece height – max. 100 mm Workpiece width – max. 1300 mm Feed rate 0.4 – 2.6 m/min Number of spindles 6 pcs Spindle length 6 x 350 mm Lsdpfx Aioz Dvyve Rjag Total power consumption 7.5 kW Machine weight approx. 2.3 t Space requirement approx. 2.07 x 2.3 x 2.21 m Additional information Includes a circulating conveyor system for workpiece carriers and an extraction/filtration system.

Condition: excellent (used), Year of construction: 2011, operating hours: 26,882 h, functionality: fully functional, travel distance X-axis: 310 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 270 mm, Exeron S 310 MF Year of manufacture: 2011 Generator hours: 26882 Control system: Exowin 20 X, Y, Z travel: 310 x 270 x 270 mm C-axis 3R tool holder in the spindle Erowa chuck on the machine table with magnetic plate Generator: 64 A C-box for carbide and PKD tools Ljdpszguk Ujfx Ai Rsag 20-position tool changer Fire extinguishing system Chiller Aluminum clamping plate, Erowa Documentation Machine is connected and available for inspection.

Condition: excellent (used), Year of construction: 2019, operating hours: 198 h, functionality: fully functional, Magnus Trendsetter Achieve 800 V Manual S Model TEE Year of manufacture 2019 Lajdpfxozlr H Ds Ai Reg

Year of construction: 2010, condition: excellent (used), functionality: fully functional, machine/vehicle number: 101210/001, For sale is a VISCOM Inline-AOI S3088-III, manufactured in May 2011, serial number 101210. The system is no longer in its original technical condition from 2011. At the end of 2022, it underwent a comprehensive modernization and maintenance by a VISCOM service technician. Approximately €29,000 was invested in the modernization, including hardware, software, and service. Condition: Used, functional. Technical specifications: - Manufacturer: VISCOM AG - Model: S3088-III - Year of manufacture: 05/2011 - Serial number: 101210 - VISCOM upgrade to VEG 101 - VISCOM conversion kit RK.C.0119 - Software: vVision - System is recognized as S3088 Flex on the software side - 8M-CBW4 (4SR) Combi camera module, White Left - 4 orthogonal cameras + 4 cameras for oblique view - VISCOM Type 126.209.B.47e - vVerify - VISCOM 2D libraries - ePM interface, dongle-based, for test program creation based on Gerber data and component/part data - Import of pad geometries for post-reflow test program creation - Multilingual user interface, including German, English, French, Italian, Spanish, Portuguese, Czech, Polish, Hungarian, Romanian, Russian, Swedish, and Chinese New system computer: As part of the modernization, a new system computer was installed: Intel Core i7-11700K 32 GB RAM Windows 10 Enterprise Additionally, a new 24" touchscreen monitor from Fujitsu was installed. The following work was carried out, among other things: - VEG-101 upgrade - Installation of the new system computer Lasdpfezuw R Hjx Ai Rsg - Data transfer from the previous to the new system computer - Switch to vVision - M3 annual maintenance - Cleaning of the sensors - General cleaning of the system The work performed is documented in the available VISCOM service reports and invoices. The scope of supply includes, among other things: - VISCOM calibration case - Calibration plates - UPS system - UPS equipped with a new RBC123 battery in August 2026 - Operating manual - Transportation manual - VISCOM service reports - Invoices for the work performed - VISCOM training materials - vVision user training materials Special feature of the machine This system is not simply an older S3088-III in its original condition. The machine has undergone extensive technical modernization and has been equipped with a new system computer, a more up-to-date VISCOM operating environment vVision, and the VEG-101 platform. The investment of approximately €29,000 in modernization, hardware, software, and VISCOM service is accordingly documented. The system is particularly suitable for companies that are looking for a VISCOM inline-AOI with extensive features and completed modernization and prefer a used system over a new machine.

Condition: used, functionality: fully functional, machine/vehicle number: 34554, Mayer & Cie. RELANIT S single-jersey circular knitting machine. Mayer & Cie. single-jersey circular knitting machine, model RELANIT S, machine number 34554. Manufactured in Germany. NAMEPLATE DATA Nominal diameter: 762 mm / 30 inches Gauge: 28 E Pitch: 0.91 mm Number of needles: 2,664 Manufacturer: Mayer & Cie. Maschinenfabrik, Emil-Mayer-Straße 10, Albstadt (Germany) The nameplate indicates “Made in Western Germany” APPLICATION Single-jersey fabric in fine gauge, suitable for shirts, underwear, nightwear, lightweight outerwear, and fine technical fabrics. RELANIT TECHNOLOGY Relative motion cam system, which reduces friction, extends needle life, and reduces yarn tension. INSTALLED EQUIPMENT REIVAX DC-3 electronic defect detector (Taube, Mataró), with sensitivity, current, defect, needle stroke, memory, stop, and reset warnings. OLI-FOX lubricator (Talleres Guerra, Mataró). Analog control panel with A / B / C revolution display. Autonics FX4S counter. Complete upper rail installed on the machine. CONDITION Complete and assembled machine. It does not need to be disassembled to be removed from the warehouse. Currently, fabric from the last production run is still in the machine. A visit can be arranged for an on-site inspection and operational test. YEAR Approximately 1990, based on the serial number and the nameplate. CE MARKING Ljdjzvhx Repfx Ai Rsag The machine does not have CE marking. For its commissioning within the European Union, the buyer must carry out the corresponding conformity assessment and, if necessary, the required adaptations. DIMENSIONS AND TRANSPORT Approximate dimensions: Length: 2.70 m Width: 2.00 m Height: 2.70 m Disassembly: No disassembly required Location: Albacete, Spain

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 3075419, spindle speed (max.): 2,400 rpm, travel distance X-axis: 432 mm, travel distance Z-axis: 1,118 mm, swing diameter over cross slide: 635 mm, turning diameter over bed slide: 1,016 mm, For sale is a HAAS SL-40HE CNC turning center, manufactured in 2006, in a High-Center configuration with a full C-axis and driven tools. This robust CNC turning machine is suitable for demanding turning and milling operations. TECHNICAL DETAILS Travel in X-axis: 432 mm Travel in Z-axis: 1,118 mm Spindle speed max.: 2,400 rpm Swinging diameter over bed: 1,016 mm Swinging diameter over cross slide: 635 mm Bar capacity max.: 101.6 mm C-axis: full C-axis Spindle power: 29.8 kW / 40 hp Spindle nose: A2-8 Spindle bore: approx. 116.8 mm Gearbox: 2-speed Turret capacity: 10 stations Driven tools: yes MACHINE DETAILS Ledpfjzy Npfex Ai Roag Dimensions & Weight Dimensions (L x W x H): approx. 5,500 x 2,300 x 2,300 mm Machine weight approx.: 11,000 kg

Condition: used, Year of construction: 2015, functionality: fully functional, sheet thickness (max.): 2 mm, overall weight: 2,600 kg, total length: 1,000 mm, input voltage: 480 V, We offer this used Prinzing BEA2-S riveting and flanging machine, year of manufacture 2015. Type: BEA2-S Material thickness: 1.5 mm Length: 1000 mm Lsdpfxoy Ev Smo Ai Roag Serial number: 1007 Year of manufacture: 2015 Weight: 2600 kg Voltage: 480 V Frequency: 60 Hz Power: 19.5 kW Current: 40 A The machine is already disassembled. If you have any questions or need further information, please don't hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, clamping force: 500 kN, mold height (min.): 225 mm, ejector force: 300 N, overall weight: 2,450 kg, input voltage: 380 V, Equipment: documentation/manual, ARBURG 320 S in excellent condition, low operating hours, and with a Piovan dryer. Year of manufacture: 1998. Piovan dryer, model TDM604. Year of manufacture: 2005. Includes documentation. Ledjzxg Amspfx Ai Rjag The machine is powered on for inspection.

Condition: new, Rexroth TKK-225-AL-1 rail guide table MNR R055711245 FD 557, unused in opened original packaging, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Laedoqigidspfx Ai Rsg

Year of construction: 2017, condition: like new (used), Used industrial X-ray system Lajdpfszttg Iox Ai Reg Manufacturer: VisiConsult Type: XRH 222-S Year of manufacture: 2017 X-ray voltage: 225 kV Equipment: CT and ADR expansion Workpiece dimensions: max. 650 × 860 mm Workpiece weight: max. 120 kg The system is designed for industrial X-ray inspection and features CT and ADR functionality. Further technical data and information available upon request.