Used Ciata Thi-30 for sale (24,890)

Year of construction: 2007, condition: good (used), Volume flow rate: 4.6 m3/min. Pressure: 10 bar Main motor power: 30 kW Lasdpfxoi D D Nis Ak Aod Power supply: 400 volts, 50 Hz Connection thread: 1 1/2 inches Operating hours: 8000 h Includes compressed air dryer!!! Space requirement (L x W x H): 1850 x 1050 x 1760 mm Weight: 910 kg Good condition.

Condition: new, Rexroth Indramat MDD112C-N-015-N2L-130GA1, serial number: MDD112-14925, unused, 100% functional, scope of delivery as shown in the photos. Lasdpfsi D Ndzsx Ak Aed

Condition: new, Rexroth Indramat MDD112D-N-015-N2L-130GA0 Permanent Magnet Motor, Serial No.: MDD112-22413, without encoder, unused, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! ATTENTION: Please enquire for charges for packing and transport separately! Lajdpfoi D Nfbsx Ak Aod

Condition: new, Rexroth Indramat MDD112D-N-040-N2L-130GA0 Permanent Magnet Motor, serial number: MDD112-20415, unused, 100% functional. Scope of supply as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Ljdpfxoi D Nffj Ak Aead

Condition: repair required (used), Manufacturer: Thieme Model: 3020 L Table size: 100 x 130 cm Lodpfxsx H Rybs Ak Ajad Electrical inspection required!

Condition: excellent (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive Lodpjb A Hfwefx Ak Aead -Typical current: 40 A -DC circuit nominal voltage: AC 700 V -Dimensions: 65/410/H260 mm -Weight: 7 kg

Condition: used, Computer cabinet, control cabinet, terminal cabinet, terminal housing, control panel stand housing, control panel stand foot, stand column -Stand: stand housing for control desks / terminals -Execution: solid metal housing Laodpfxjizk Rws Ak Asd -Dimensions: see photos -Dimensions: 385/335/H730 mm -Weight: 32 kg

Condition: used, Permanent magnet motor, permanent magnet motor, electric motor, permanent magnet motor, permanent magnet motor, servo motor -Manufacturer: Rexroth / Indramat, the motor comes from the Werner TC 2.6K machining center -Type: MAC112A-0-LD-2HC / 130-A-1 Laedjgz Ti Nspfx Ak Asd -Speed: 3000 rpm -Shaft: Ø 32 x 60 mm -Brake: 14 Nm -Dimensions: 385/192 / H240 mm -Weight: 26 kg

Condition: new, Rexroth Indramat TDM 2.1-030-300-W0 Controller, part number: R911220111, serial number: 220111-21644, unused, in opened original packaging, 100% functional. Scope of delivery as shown in the photos. Lodpfx Aoi Eczgok Aoad

Condition: used, Year of construction: 2009, printing size 75x105cm, parallel lift, moving printing bed, with gripper system and belt delivery to the right, infinitely adjustable squeegee stroke, with pneumatic squeegee pressure control, screen frame insertion from the front, with pneumatic squeegee clamping, control panel with keyboard (useable on the left or on the right side), max. sheet size: 78x108cm, max. screen frame size: 120x140cm, additional with cleaning unit model TEKNEK, completely with 3sets squeegees and floodbars, connection: 380/400V, 50Hz, compressed air 6bar necessary. Used, year of construction: 2009, will partly be overhauled and will then be technically and optically in mint condition. Ledpfxjyu Tu Aj Ak Ajad

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: CAI965725, overall weight: 470 kg, power: 22 kW (29.91 HP), pressure (max.): 7 bar, type of cooling: air, Equipment: compressed air system, compressor, type plate available, The Worthington RLR 30E V G10 is a lubricated compressor, ideal for those seeking a robust and efficient machine. Manufactured by the renowned WORTHINGTON brand, this specific model is well-suited for a range of industrial applications thanks to its capability to operate at 7 bar pressure. Weighing 470 kg, it is designed to deliver stable and continuous performance while remaining relatively compact for its category. This used compressor maintains the high quality and reliability expected from the Worthington name. This piece of compression equipment is a viable solution for businesses looking to optimize their performance while managing costs effectively. Its robustness and technical specifications make it a relevant choice for those who prioritize both durability and efficiency. Ledpfjy Eyr Rsx Ak Aoad

Condition: used, functionality: fully functional, Year of construction: 1999, operating hours: 23,000 h, Machine is in good condition. All Basic operations are functional. Ready for use Lsdpszam Dzefx Ak Aoad

Condition: like new (used), Ecran T 3000 Thieme. Sartech Europe Lda. Ljdpfx Asy Ah Alsk Aead In addition to selling equipment, we also provide technical support services to ensure your production line runs smoothly: * Custom manufacturing: We produce high-quality hot air tunnels, conventional UV and electronic UV systems. * Technical expertise: Our specialized teams handle installation, assembly, and both preventive and corrective maintenance. * Machine handling: We are capable of installing, removing, or relocating machines and industrial equipment up to 30 tons.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, total length: 4,500 mm, total width: 2,230 mm, total height: 3,000 mm, volume flow: 9,250 m³/h, power: 250 kW (339.91 HP), input frequency: 50 Hz, 1 rotary lobe blower Manufacturer: Kemostal (Tuthill M-D Pneumatics) Type: KPAB 1230 PD-Plus Flow rate: 9250 m³/hour (154 m³/minute) Laedjv T Tr Ijpfx Ak Ajd Differential pressure: 500 mbar Maximum process pressure: 1000 mbar Unit outlet line: Ø 406.4 mm Electric motor: ABB Type: M2CA 355MA 4 B3 Power: 250 kW Speed: 1487 rpm Voltage: 400/690 volts Soundproof booth: with 4 doors Length: 4500 mm Width: 2350 mm Height: 3000 mm

Condition: used, power capacity 10,4 Nm volt 0 V ampere 19,5 A weight of the machine ca. 24 kg Laedpfsvtr S Hex Ak Asd

Condition: used, power capacity 10,4 Nm volt 0 V ampere 19,5 A Laedsvtr Rpepfx Ak Ajd weight of the machine ca. 24 kg

Condition: used, power capacity 7,2 Nm volt 0 V Lajdpjvtr Riefx Ak Asd ampere 12,6 A weight of the machine ca. 18 kg

Condition: used, power capacity 6,6 Nm volt 0 V Lsdpfxjvtr Sts Ak Aoad ampere 10,8 A weight of the machine ca. 12 kg

Condition: used, power capacity 10,4 Nm volt 0 V ampere 12,1 A Lasdpfsvtr Syex Ak Aed weight of the machine ca. 22 kg

Condition: ready for operation (used), Year of construction: 1990, Two jigger dyeing machines from various manufacturers are available. 1) Thies type NT 2300, year of manufacture: 2015, max. working temperature: 98°C, max. fabric width: 2850mm, roller width: 3000mm, max. fabric length at thickness from 0.3mm: 3177mm. 2) MCS Maxi Jigger 98°, year of manufacture: 2021, batch liquor ratio: 1:2, roller diameter: 320mm, lower roller diameter: 139.7mm. Documentation available. An on-site inspection is possible. Individual sale is possible. Lasdpfxsyhqb Ho Ak Asd

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, year of last overhaul: 2025, Thieme model 3050L screen printing machine, fully refurbished. Format: 140x180 Year: 2007 Condition: Final stage of refurbishment Lsdpexk T D Iofx Ak Aoad Sartech is a company specializing in screen printing, automation, and robotics solutions, as well as the manufacturing of UV (electronic) or hot air tunnels.

Condition: used, Bar max: 8 m3/h: 211 KW: 22 Ljdpoc Sc E Rjfx Ak Ajad V / P / Hz: 400 / 3 / 50 min - 1: 3000 Kg: 465

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,550 mm, total height: 2,050 mm, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, type of cooling: air, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Ledjzntfmspfx Ak Aead Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) Laedpfx Akoznr Sxs Aed - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: used, Year of construction: 2003, functionality: fully functional, power: 30 kW (40.79 HP), Manufacturer: KAESER Model: ASD 57 Motor: 30 kW Capacity: 4.5 m³/h Lodpfx Akjwtz E Us Aoad Year of manufacture: 2003 Operating hours: 29,900 h