Used Ciata 245 S for sale (10,976)

Condition: new, Year of construction: 2025, Drum chipper series ATH S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation ATH 220 series - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg ATH 330 series - Feed height: 300 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pieces - Number of counter knives: 2 pieces - Rotor diameter: 700 mm - Number of feed rollers: 3 pieces - Throughput capacity: up to approx. 70 rm/h * - Chipping length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Drive power feed rollers: 2 x 3.0 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chipper length, kW main motor, number of knives, feed Dsdpeuz Hmxofx Adusla Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: good (used), Year of construction: 2023, functionality: fully functional, Rotor is a machine for spray cleaning and flood cleaning. The basket is inserted into the chamber manually or automatically. It is possible to adjust the rotation speed of the basket and the type of movement - full rotation or swiveling. Dsdpfel Rbk Rsx Aduela Hot air drying is included in the basic model, but can be supplemented with vacuum drying. In this version, the system has two separate tanks, one for cleaning and one for rinsing. Data: Cleaning area 300 x 450 mm H 300 mm Load 50 kg Exterior dimensions: Width 140 cm Depth 220 cm Height 220 cm Loading weight 50 kg Capacity of tank 1 500 l Tank 2 capacity 500 l Pump 1 1.5 kW 2.5 bar 200 l/min Pump 2 1.5 kW 2.5 bar 200 l/min Heating tank 1 16 kW Heating tank 2 16 kW Steam condenser 0.20 kW Tank emptying pump 0.37 kW Drying 7.5 kW Ultrasound (peak value/effective) 2 kW/ 1KWkW

Condition: excellent (used), Loos UL-S 2000kg/h 13Bar Djdpfx Aou I Ry Ajduola

Year of construction: 2004, condition: used, functionality: fully functional, machine/vehicle number: MA / 03 - 718, PRODUCTION LINE FOR THE PRODUCTION OF 330 X 330 MM ¼ AND 330 X 420 MM 1/6 FOLD NAPKINS PRICE: PRINTING MACHINE Producer: S-d-f Model: Omega Plus 8/500 09/2004 Serial number: MA / 03 - 718 Production date: 2004 EQUIPMENT 1. Single shaftless unwinder for reels up to: 1500 mm with lift • intake for roll core R 76 mm • single motor drive with multi-V-belt • drive speed controlled by dancer • automatic machine stop at reel end • dust removal system 2. Calendering Unit • for equalizing the tissue thickness, reducing of dust, and improving the printing quality • single motor drive • hardened and ground cylinders • Web tension measuring roller for single drive control with mechanical stop 3.Web Aligner No. AND • BST web aligner positioned in front of printing station 4. Flexographic Printing Press • 2 printing tower frames for max eight (8) printing units • s-wrap pull rollers and guide roller • moveable operating platform for operating the printing units • touch panel operator • range format 330 mm 2 • single drive for each printing unit • motorized 360° radial register • angle synchronizer • quick-change device for plate cylinder (with spherical valves) • integrated quick-change device with air support for printing plate sleeves • automatic register pre-adjustment ('Make-Ready') • ceramic coated anilox roller • 2 sets mounting cylinders – for 330mm (Lunch) and 420mm (Buffet) napkins formats • ink level detector with acoustic or visual alarm • lifting and dropping of ink trays • protection covers, safety switches 5. Web Inspection Device Type BST 6. Infrared Drying Equipment • two drying infra-red cassettes • drying cassettes separately adjustable • cassette cooling by integrated fans (with temperature control) Dlsdpfx Adjwnx N Housa • automatic shut-off and lifting upon printand machine stop 7. BST Web Aligner No. II for embossing 8. Double embossing station • two-position embossing station • two sets rollers for embosiing – Formats: Lunch 330x330mm, Buffet 330x420mm) 9. Folding frame 10. ¼ Folding Head 11. Manual product transfer to the packaging machine. 12. Electrical Equipment TECHNICAL DATA Max printing speed: 300m/min Real speed printing: 230m/min Supply voltage: 230 / 400 V, 3 – phases + PE, 50 Hz Control – Siemens S7 Max Power: 93 KW 3 PACKING MACHINE Producer: Senning Model: 522 SE/M Serial number: 71,660 Production date: 2004 Formats: • Lunch 330 x330 mm ¼ folded • Buffet 420 x 330 mm 1/6 folded • minimum package height 18mm • maximum package height 40 mm. TECHNICAL DATA Maximum packing speed: 60 packs/min Standard packing speed: 40 packs/min Foil material: • Polyethylene (PE) – 35-40um • Polypropylene (OPP) – 22-28um • Polypropylene (PP) 35-40 um. • Core from foil diameter – 76 mms ELECTRICAL DATA Supply voltage: 230 / 400 V, 3 – phases + PE, 50 Hz Max power: 20 KW.

Condition: excellent (used), Steam cleaner for crates/containers 60x40 Brand Maskinfabrikken Hillerslev a/s, plastic chain, belt width: 350 mm, clearance: 650 mm x 200 mm, Dljdpfx Adov Ey Ugouea overall dimensions: 7300 mm x 1500 mm x 2000 mm

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: EcoPurge30, pneumatic purging pump for 2K-metering pump max. flow: 6l/min max. pressure: 21MPa pressure ratio: 30:1 Dlodopz H Hqjpfx Adusa

Year of construction: 2025, condition: new, Oscillating screen ASM series S&F oscillating screens and horizontal screens are used in many areas of the wood processing industry (sawmills, pelleting plants). Screening machines of the "ASM" series screen wood chips, wood pellets, sawdust and sawdust, waste wood, biomass and many other sawmill by-products in dry and wet applications. The material-protecting, horizontal-circular screening movement of the inclined screen box ensures a high separation efficiency of the vibrating screen. One advantage of the screening machine is that long and fibrous particles glide diagonally to tangentially over the screening surface. This means that - in contrast to throw screens - no jamming or plugging grain occurs. Further advantages are the robust design, the high screening capacity and the long, low-maintenance running time of the screening machine. In addition to standard dimensions, the company also supplies the "ASM" series as a "customising solution" in a split design for existing plants. This makes it possible to use new screening machines in cramped and difficult-to-access spaces in existing plants or sawmills. Screening machines of the "ASM" series offer screen sizes from 0.5 to 15 m² (per screen deck) and are characterised by a high screening capacity (up to 350 m³/h - depending on the material). At a glance: - Ideal for: Wood chips, pellets, sawdust, biomass, bark, waste wood, substitute fuel. - Areas of application: Wood industry, recycling and waste disposal, animal feed - Screening area: 0.5 - 15 m² (30 m² as double deck) - Screening capacity (depending on material): up to 350 m³/h - Separation size: 0.1 - 150 mm (depending on size) - Drive power: 0.55 - 15.0 kW (depending on size) Advantages: - High screening capacity - High separation efficiency - No jamming and plugging - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Dlsdpfx Asin Ey Sjdusa Please contact us! We will be happy to advise you.

Condition: excellent (used), COSTA LEVIGATORS Series S model SN 5-groups first group electronic sectioned transverse belt Dlsdpfxjr Iyvme Adusa second group 1 roller third group 1 roller fourth group electronic sectioned pad super finisher fifth group electronic sectioned transverse belt machine width 1350 vacuum inverter on all belt groups inverter on belt outfeed brush group blower group on outlet

Condition: excellent (used), Year of construction: 2013, operating hours: 11,347 h, functionality: fully functional, machine/vehicle number: 50433-115-4291, Power supply: Voltage 400 V AC, 50 Hz, Main motor power 2 X 200 kW, Main switchboard, rated current 760 A. Main motor, full load current 2 x 341 Amp, PLC controller. Drive principle, hydrostatic transmission with power consumption limiter. Working, cutting cassette: 2 asynchronously operating shafts. Speed ​​33 rpm. Number of rotary knives 2 x 12 pieces, number of lower, fixed knives 2 x 24 pieces. Bearings 2 x 2 barrel. Drive system after general renovation - pumps, engines. The M&J waste shredder is an ideal solution for shredding various types of waste, industrial, municipal. The waste is shredded using one or two rotating shafts equipped with spirally mounted knives, which ensures optimal shredding of the material. The waste shredder is equipped with a fully automated control system that monitors the device's operation and protects it from overload. The device consists of modules, which is why it is a very flexible solution. Dlsdpfx Adoh Nu Tveusa

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 01 - 346, year of last overhaul: 2025, PRODUCTION LINE FOR THE PRODUCTION OF 330 X 330 MM AND 250 X 250 MM ¼ FOLD NAPKINS 1. Single shaftless unwinder for reels up to: 1500 mm with lift • intake for roll core R 70 or 76 mm • max roll weight 350 kg • single motor drive with multi-V-belt • drive speed controlled by dancer • automatic machine stop at reel end • dust removal system 2. Calendering Unit • for equalizing the tissue thickness, reducing of dust, and improving the printing quality - Ø 254 mm • single motor drive • hardened and ground cylinders • Web tension measuring roller for single drive control with mechanical stop 3. Web Aligner No. AND • BST web aligner positioned in front of printing station 4. Flexographic Printing Press • 2 printing tower frames for max eight (8) printing units • s-wrap pull rollers and guide roller • moveable operating platform for operating the printing units • push-button operator panel • maximum format range 500 mm 2 • single drive for each printing unit • motorized 360° radial register • angle synchronizer • quick-change device for plate cylinder. • integrated quick-change device with air support for printing plate sleeves • ceramic coated anilox roller • 2 sets mounting cylinders – for 330mm (Lunch) and 500 mm (cocktail) napkins formats • ink level detector with acoustic or visual alarm • lifting and dropping of ink trays Dljdpfx Aewnxgleduja • protection covers, safety switches 5. Web Inspection Device Type BST with S-VGA Monitor 6.Infrared Drying Equipment • two drying infra-red cassettes • drying cassettes separately adjustable • cassette cooling by integrated fans (with temperature control) • automatic shut-off and lifting upon print end machine stop 7. BST Web Aligner No. II for embossing 8. Double embossing station • two-position embossing station • two sets rollers for embosiing – Formats: Lunch 330x330mm, cocktail 250x250mm 9. Folding frame 10. ¼ Folding Head 11. Manual product transfer to the packaging machine. 12. Electrical Equipment TECHNICAL DATA Max printing speed: 300m/min Real speed printing: 200 – 230 m/min Supply voltage: 230 / 400 V, 3 – phases + PE, 50 Hz Control – Siemens S7 Max Power 93 KW. 3 PACKING MACHINE Producer: Senning Model: 522 SE/M-30 Serial number: 71,155 Production date: 2002 Formats: • Lunch 330 x330 mm ¼ folded • cocktail 250 x 250 mm 1/4 folded • minimum package height 18mm • maximum package height 40 mm. TECHNICAL DATA Maximum packing speed: 30 packs/min Standard packing speed: 30 packs/min Foil material: • Polyethylene (PE) – 35-40um • Polypropylene (OPP) – 22-28um • Polypropylene (PP) 35-40 um. • Core from foil diameter – 76 mm ELECTRICAL DATA Supply voltage: 230 / 400 V, 3 – phases + PE, 50 Hz Max power 20 KW.

Year of construction: 2025, condition: new, Screening plant for loading wood pellets, stationary New production Screening capacity: 10 - 50 t/h (depending on design) consisting of: Dlodpfx Ajinkw Ajduja - Modul-Silo type M-300 (45 °) - Oscillating screen type ASM - Conveyor belt type MFB incl. magnetic separator - Veralde set // MODULFLEX loader - Pipe screw conveyor (option) - Dust extractor (option) Functional description and mode of operation: The pellets are fed into the modular silo by means of a wheel loader. The pellets then pass through the ASM oscillating screen. The screen separates the pellets into two size classes (pellets and dust). The screened pellets are loaded into the silo vehicle by means of a conveyor belt and loading equipment. Thanks to the integrated level indicator in the loading set, the system switches off automatically when the silo vehicle is sufficiently full. The dust fractions are discharged by means of a screw conveyor. To minimise the dust load, it is possible to equip the screening plant with an additional dust extractor type NE. The capacity of the screening plant (depending on the design) is between 10 - 50 t/h (70 m³/h) for wood pellets. Advantages: - High screening capacity - High separation efficiency - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you. We look forward to your feedback!

Year of construction: 2025, condition: new, Screening plant for screening wood chips Design: stationary or semi-mobile New production Screening capacity: approx. 20 - 40 m³/h (depending on design) consisting of: - Vibrating hopper type AVB - Screening machine type ASM - Bottom frame / hook lift (option) - Trough belt conveyor belt type MFB - Electrical installation Functional description and mode of operation: Dodpfx Aoin Ewlodujla The woodchips are fed into the vibrating hopper by means of a wheel loader. The wood chips then pass onto the oscillating screen type ASM. The screen separates the wood chips into three size classes (overlengths, chips, dust). The fractions are discharged from the wood chip screen by means of conveyor belts. The capacity of the screening machine (depending on the design) is between 20 - 40 m³/h for wood chips. Advantages: - High screening capacity - High separation efficiency - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you.

Year of construction: 2025, condition: new, Screening plant for loading wood pellets, semi-mobile New production Screening capacity: 10 - 50 t/h (depending on design) consisting of: - Trough belt conveyor type TFB - Screening machine type ASM - Troughed belt conveyor type MFB incl. magnetic separator - Veralde set // MODULFLEX loader - Pipe screw conveyor (option) - Dust extractor (option) Functional description and mode of operation: The pellets are fed into the trough belt conveyor (incl. bunker attachment) by means of a wheel loader. The pellets then reach the oscillating screen type ASM. The screening machine separates the pellets into two size classes (pellets and dust). The screened pellets are loaded into the silo vehicle by means of a trough conveyor belt and loading equipment. Thanks to the integrated level indicator in the loading set, the system switches off automatically when the silo vehicle is sufficiently full. The dust fractions are discharged by means of a screw conveyor. To minimise the dust load, it is possible to equip the screening plant with an additional dust extractor type NE. Dledpfeiux Tfex Adusa The capacity of the screening plant (depending on the design) is between 10 - 50 t/h (70 m³/h) for wood pellets. Advantages: - High screening capacity - High separation efficiency - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: X66609, clamping force: 6,600 kN, screw diameter: 84 mm, injection pressure: 1,650 bar, ejector stroke: 300 mm, controller model: CDS700, TECHNICAL DETAILS Clamping unit Clamping force: 6,600 kN Platen size (H x W): 1,370 x 1,370 mm Tie bar spacing (H x W): 900 x 900 mm Minimum/maximum mold height: 300 - 900 mm Maximum opening stroke: 1,840 mm Centering ring diameter: 200 mm Ejector stroke: 300 mm Injection unit Screw diameter: 84 mm Shot volume: 2,575 cm³ Shot weight (PS): 2,369 g Injection pressure: 1,650 bar Maximum injection speed: 500 mm/s MACHINE DETAILS Control system: CDS700 Dsdpfex A Awzex Adujla Clamping unit weight: 25,400 kg Injection unit weight: 7,000 kg EQUIPMENT Pneumatic valves (6 pcs.) Core pull (1 pcs.)

Year of construction: 2008, condition: ready for operation (used), General Data Measurements height 250 mm Measurements depth 1700 mm Dimensions Machine Length 3530 mm Dledpfx Ajx D Hqnedusa Main Drive Spindle Speed 24000 RPM This 3-axis CNC processing center manufactured in 2008 features a robust Felder Format4 Profit 2.s with a working area of X=3530 mm, Y=1700 mm, and Z=250 mm. It achieves speeds up to 60 m/min in X and Y, and 15 m/min in Z. Includes a mobile dust extractor Felder RL200, enhancing operational cleanliness and efficiency. Consider the opportunity to buy this Felder Format4 Profit 2.s CNC processing center. Contact us for more information about this machine. Application Types CNC Wood Machining

Condition: used, Year of construction: 2000, Empty weight: 1.500 kg Dimensions (LxBxH): 340 x 160 x 110 cm Four-sided planer Futura Module 4 - 220 S Dedpfxswnhbfo Adusla Max working width 220mm Max working height 120mm Spindle diameter 40mm Input table 2250mm 1st spindle under 5.5HP 2nd spindle, right 4HP 3rd spindle, left 4HP 4th spindle, above 5.5HP Tersa heads Year of construction 2000 380V Transport dimensions 3400x1100x1600mm, weight 1500kg - Year: 2000 - Documentation available: No - CE certificate present: No - Transport dimensions: 3400mm x 1600mm x 1100mm (l x w x h) - Transport weight [kg]: 1500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2024, New machine Year of construction 2024 Technical data Table size 1100 x 760mm Table height 905mm Milling spindle 30mm with quick-release nut Clamping height 140mm Height adjustment 125mm Suction nozzle 2 x Ø 120mm Infinitely variable speed control 150010000 rpm Motor power 7.5 kW (10 HP) Net weight approx. 880kg Technical description 7" touch control, can be used optionally, top and bottom 7" capacitive touchscreen, can also be operated with gloves can also be operated with gloves (e.g. with Maxi Flex) Language switching German, English, French (other languages on request) Milling cutter zero point selectable in the program, 3 reference points Simple menu structure thanks to innovative touch control (max. 2 levels) Display (work screen) for tool and program number program number, height, angle, speed and milling fence Operating hours counter Warning messages in the event of incorrect operation Remote maintenance via Internet (VPN tunnel) USB interface for data backup and importing Tool, program and user Tool database for 5 tools (20 programs possible per tool) 20 programs are possible per tool) Heavy-duty bench router with double-sided swivel-mounted, fixed built-in milling spindle for swivel range of +/- 45.5° 2-axis positioning control for height and tilt adjustment swivel adjustment Electronic position and speed displays Dlsdoxz Smpopfx Aduja Infinitely variable speed control 1500 10000 rpm 7.5 kW motor with 11 KW frequency converter Push button with electronic soft start Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Milling fence 301 Overall adjustment via 1 handwheel on the right-hand side, Adjustment range approx. 140 mm, dimension display, Total stop via touchscreen +/-0.1 mm, Partial stop adjustment, (chip removal) +5mm to -25mm is carried out via a star knob screw on the left side side, dimension display via one mm vernier, clamping on the machine table the machine table manually via clamping clamping screws, milling fence made of die-cast aluminum with 2 milled cast iron stop slats 500mm long with aluminum splitter tongues, maximum possible tool diameter is tool diameter is 250 mm Machine socket Lockable main switch Electronic, wear-free motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30mm with quick-release nut CE-compliant incl. - Milling fence type 301 - Cast stop plates and aluminum splitter tongues - Milling protection and pressure device GAMMA V 1629 Table pusher for table top 1100 x 760 mm Coated surfaces, for quick, convenient and tool-free tool-free adjustment to different tool diameters tool diameters up to max. 240 mm, the table insert Table insert with quick lock up to tool diameter 155 mm instead of standard table insert rings (not in conjunction connection with rotary table) - Zeromaster reference measurement setting device for exact 0-point height adjustment from the milling tool to the table top for 24 V DC - HSK-80 quick-change arbor system with spindle lock and spindle lock and milling arbor 30mm instead of milling spindle 30mm (higher concentricity and no sticking in the spindle as with the spindle as with the MK 5 system or steep taper) - Console to the

Condition: new, Year of construction: 2024, Panhans swivel milling machine type: 245/20 Solid German engineering Djdpfx Ajr Ig H Todusla Table milling machine with one-sided swiveling fixed milling spindle for the swivel range from -5° to +45.5° Positioning control for height and swivel adjustment with height zeroing and offset measurement travel Electronic position and speed displays 4 speeds 3000 / 4500 / 6000 / 9000 rpm Quick belt tensioning device Push button for spindle start and stop Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Lower control panel on rigid frame support Milling fence 216 total adjustment via handwheel and LCD display incl. cast fence plates and aluminum splitter tongues Machine socket Lockable main switch Mechanical motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE-compliant GS tested Table size 1100 x 760 mm Table height 870 mm Milling spindle not exchangeable 30 mm Clamping height 140 mm Height adjustment 125 mm Suction nozzle 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 800 kg Equipment: Top control panel Swivel +-45 degrees Motor 7.5 Kw Centerx Extendable frame support Location: ex stock 54634 Bitburg - immediately available -

Condition: used, mileage: 73,959 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,750 mm, first registration: 12/2021, fuel tank capacity: 80 l, CO₂ emissions: 222 g/km, emission class: euro6, color: white, number of seats: 3, number of previous owners: 3, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, sliding door, trailer coupling, = Additional Options and Equipment = - Front and rear parking sensors - Right-hand side sliding door - Android Auto - Apple CarPlay - Automatic dipped headlights - Heated exterior mirrors - Bluetooth hands-free kit - Roof rack - Electric front windows - Electrically folding exterior mirrors - Electrically adjustable exterior mirrors - Euro 6 - Driver airbag - Remote central locking - Height-adjustable driver’s seat - Height-adjustable steering wheel - Leather steering wheel - Multifunction steering wheel - Multimedia capability - Fog lights - Radio - DAB radio - Rain sensor - Start/stop system - Immobiliser - Heated windscreen - Partition wall = Further Information = General Information Number of doors: 5 Model range: May 2019 – July 2023 Cab: single Technical Information Torque: 360 Nm Number of cylinders: 4 Engine displacement: 1,995 cc Transmission: 6-speed manual Top speed: 157 km/h Dimensions Length/height: L3H2 Dimensions (L x W x H): 598 x 206 x 255 cm Weights Unladen weight: 2,280 kg Payload: 1,085 kg Gross vehicle weight (GVW): 3,365 kg Interior Interior: black Fuel Consumption Dledpfxex Dl Uxj Adusa Average fuel consumption: 6.3 l/100km Urban fuel consumption: 6.2 l/100km Extra-urban fuel consumption: 6.4 l/100km Maintenance, History and Condition APK (roadworthiness inspection): valid until 07/2026 Number of keys: 2 (2 remote fobs) Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: X88628, clamping force: 6,600 kN, screw diameter: 84 mm, injection pressure: 1,650 bar, ejector stroke: 300 mm, controller model: CDS700, The cylinder, screw, and screw tip of the injection system were replaced a year ago! TECHNICAL DETAILS Dodpfx Asx A Avqsduela Clamping Unit Clamping force: 6,600 kN Platen size (H x W): 1,370 x 1,370 mm Tie bar spacing (H x W): 900 x 900 mm Minimum mold height: 400 mm Maximum mold height: 1,125 mm Maximum opening stroke: 2,065 mm Centering ring diameter: 200 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 84 mm Injection volume: 2,575 cm³ Shot weight (PS): 2,369 g Injection pressure: 1,650 bar Maximum injection speed: 500 mm/s MACHINE DETAILS Control system: CDS700 Weight of clamping unit: 29,300 kg Weight of injection unit: 7,700 kg EQUIPMENT Pneumatic valves (4 pcs) Cores: (1 pc)

Condition: good (used), Geared motor, electric motor, three-phase motor, right-angle gear motor -Speed: 25 rpm -Power: 0.6 kW Dodpfx Adecmtn Aeuela -Voltage: 500 VOLT Y -Design: B3 -Shaft diameter: Ø 38 mm -Protection class: IP 44 Price: per piece -Quantity: 2 available -Dimensions: 490/250/H290 mm -Weight: 39 kg

Condition: excellent (used), Year of construction: 2014, ARBURG A 1500 T 1600-400 rotary table (29.279 h) (S&P 3786) Manufacture year: 2014 Operating hours: 29,379 Stunden Screw: 35 mm Injection pressure: 2500 bar Stroke volume: 154 cm³ Clamping Force: 150 t Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4600 x 1900 x 2300 mm Eeight: 11000 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 4 x Corepuller, Airvalve, Interface Colorizing, Interface Robot etc... Price: on request Dledpjx Eb Taofx Aduoa contact: Mr. Ralf Schulz

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: X81559, clamping force: 9,000 kN, screw diameter: 115 mm, injection pressure: 1,740 bar, ejector stroke: 300 mm, controller model: CDS700, TECHNICAL DETAILS Clamping Unit Clamping force: 9,000 kN Platen size (H x W): 1,570 x 1,560 mm Tie bar spacing (H x W): 1,010 x 1,010 mm Min. mold height: 300 mm Max. mold height: 1,190 mm Max. opening stroke: 2,290 mm Centerring diameter: 250 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 115 mm Shot volume: 6,232 cm³ Shot weight (PS): 5,733 g Injection pressure: 1,740 bar Max. injection speed: 300 mm/s MACHINE DETAILS Control system: CDS700 Dljdox A At Njpfx Aduoa Weight of clamping unit: 44,500 kg Weight of injection unit: 20,000 kg EQUIPMENT Pneumatic valves (6 pcs.) Core pulls (1 pc.)

Condition: good (used), 2 columns punching tool, cutting tool, punching tool, punch, punching die, punching die, column frame -Punching tool: 2 columns Dlsdpfsmxpt Sox Aduja -Stroke: 40mm -Stamp: without accessories, see photos -Dimensions: 245/240/H240 mm -Weight: 30 kg

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: X81456, clamping force: 9,000 kN, screw diameter: 98 mm, injection pressure: 1,650 bar, ejector stroke: 300 mm, controller model: CDS700, Injection molding machine including Sytrama robot! TECHNICAL DETAILS Clamping Unit Clamping force: 9,000 kN Platen size (H × W): 1,570 × 1,560 mm Tie bar spacing (H × W): 1,010 × 1,010 mm Min. mold height: 300 mm Max. mold height: 1,190 mm Max. daylight: 2,290 mm Locating ring diameter: 250 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 98 mm Shot volume: 4,010 cm³ Shot weight (PS): 3,690 g Injection pressure: 1,650 bar Max. injection speed: 400 mm/s MACHINE DETAILS Control system: CDS700 Clamping unit weight: 44,500 kg Injection unit weight: 12,500 kg Djdpfx Adox A Ar Eouela EQUIPMENT Pneumatic valves: 4 units Core pulls: 1 fixed / 1 movable Sytrama 101 GL robot