Used Hurlimann H-2000 Sx for sale (31,212)

Condition: new, axle configuration: 2 axles, overall weight: 2,000 kg, empty load weight: 452 kg, maximum load weight: 1,548 kg, loading space volume: 1.5 m³, loading space length: 3,050 mm, loading space width: 1,600 mm, loading space height: 300 mm, color: silver, construction height: 940 mm, working width: 1,660 mm, Hydraulics, automatic reverse drive, hot-dip galvanized, unbraked, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle with 2 years TÜV from first registration - Availability: Immediately available! - TÜV: 2 years - Floor: Multiplex screen printing with anti-slip surface - Gross vehicle weight: 2,000 kg - Unladen weight: 452 kg - Payload: 1,548 kg - Interior dimensions: 305 x 160 x 30 cm (L x W x H) - Exterior dimensions: 437 x 166 x 94 cm - Loading sill height: 64 cm - Tires: 195/50R13C steel rim - Brake: yes - Support wheel: yes, automatic - Incl. vehicle documents (letter) Vehicle documents (letter) -100 km/h at extra charge Standard equipment: - New dropside hinges incl. welded-on hooks for attaching a cargo net, among other things. - Aluminium drop sides with robust built-in locks - Anodized double-walled aluminium drop sides - All drop sides foldable and removable - Removable steel corner stanchions - Insertion option at all 4 corners for tarpaulin frames, lattice attachment, drop side attachments or front wall elevation - Sturdy eccentric locks - Screen-printed wooden floor, continuous without impact, slip-resistant and waterproof - Reinforced, sturdy bolted V-drawbar - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Many standard features: - Many standard features: - New drop side hinges incl. welded hooks for attaching a cargo net, etc. hot-dip galvanized - many cross beams therefore high point load - additional longitudinal struts welded in throughout - all cross and longitudinal beams rest on the floor - 6 lashing brackets recessed inside the side edge (1000DaN/kg) TÜV certified! - U-profile at the rear, for easier attachment of the ramps - cargo net hooks on the lower hinge sections - maintenance-free rubber spring axle from ALKO/BPW - automatic reversing - ALKO/BPW overrun device and parking brake - 13-pin plug - reversing lights - large, easy-to-reach, easy-to-clean, easy-to-clean, easy-to-clean, easy-to-clean, easy-to-clean, easy-to-clean, easy-to-clean, easy-to-clean, easy-to-clean.rear driving lights - large dimensioned safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic support wheel in the middle Special equipment included in the price : - Low chassis, 195/50R13C tires, loading floor height : approx. 64cm Accessories optionally available: - High front grille, 50cm - Tarpaulin + bows - Supports, grilles, side wall attachments, nets, etc. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Lasdpfxou N Nhzo Abkoh

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: GM2000.5000 H-322.41.9000.3E 130.20, Load capacity 5t Reeving 4/1 Lifting height 9m Lifting speeds 8/1.3m/min Cab travel speeds 20/5m/min FEM group 2M Operating voltage 400V Control voltage 230V Ledevx E I Sjpfx Abkeah Flange width 300mm Several immediately available in stock

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: 06 61 218, Comm. no.: Lg 32821 Single side decoiler BBT ABH 2000/400 exhibition machine, unused machine no.: 06 62 218 Lsdpfxsg U Utvs Abkoah year of manufacture: 2021 Technical data load capacity approx. max. 2.000 kg strip width max. 400 mm Coil inner diameter approx. 450 to 520 mm Coil outer diameter max. 1,500 mm Unwinding speed approx. 2 to 15 min.-1 With adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase geared motor. Spreading of the support segments manually by means of hand crank via joints Number of supporting segments 3 Coil side guide via strong limiting arms, clampable. Reel stand in strong box construction as welded design. construction. Additional equipment: Shutdown "belt loop too small" by antenna switch, attached to the column of the bottom housing of the loop control. Infinitely adjustable in height. Tape side guide at the bottom housing of the loop control, by means of lateral guide rods. The passage width is continuously adjustable.

Condition: ready for operation (used), functionality: fully functional, overall weight: 2,800 kg, color: blue, empty load weight: 1,800 kg, Year of construction: 2010, Beach cleaning trailer: - Kässbohrer Lodpfxsvnt N As Abkeah - BeachTech 2000 - Year of manufacture 2010 - PTO drive (540 rpm) - Working width 185 cm - Feeler wheels - 543 cm x 230 cm x 210 cm - Empty weight: 1,800 kg; permissible gross weight: 2,800 kg - Area performance: 22,200 m³/h - 30 cm max. working depth - 1.5 m³ collection container can be tilted backwards - Rake / sieve - Smoother - Preparation for irrigation - Working speed 12 km/h - Required tractor: 70 HP Receive all newly listed vehicles by email - sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: new, Year of construction: 2024, Handheld laser welder LWH-2000-N Relfar FWH20-S10A The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including the laser head holder) 630x1300x1500 mm Price included One-day training along with machine installatio - 1 day up to 8 hours – machine installation and operational training. Relfar FWH20-S10A laser head - Welding, cutting and cleaning Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual plasma cutter. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Lasdpfx Absh H Ngtekjh Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: good (used), Year of construction: 2001, functionality: fully functional, clamping force: 12,000 kN, screw diameter: 100 mm, clearance between the columns: 1,200 mm, injection weight: 4,363 g, New machine control TECHNICAL DETAILS Clamping force: 12,000 kN Distance between columns: 1,200 mm x 1,200 mm Minimum mold height: 500 mm Maximum mold height: 1,695 mm Laodpfxevpgwio Abkeh Distance between tables: 2,000 mm Injection unit Screw diameter: 100 mm (barrier screw) Injection volume: 4,800 cm³ Injection weight: 4,363 g Performance Pump motor power: 75 kW Heating power: 70 kW

Condition: new, axle configuration: 2 axles, overall weight: 2,000 kg, empty load weight: 476 kg, maximum load weight: 1,524 kg, loading space volume: 1.7 m³, loading space length: 3,050 mm, loading space width: 1,800 mm, loading space height: 300 mm, color: silver, construction height: 940 mm, working width: 1,860 mm, Hydraulics, automatic reversing, hot-dip galvanized, unbraked, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle with 2 years TÜV from first registration - TÜV: 2 years - Floor: Multiplex screen printing with anti-slip surface - Gross vehicle weight: 2,000 kg - Unladen weight: 476 kg - Payload: 1.524 kg - Internal dimensions: 305 x 180 x 30 cm (L x W x H) - External dimensions: 437 x 186 x 30 cm (L x W x H) - Loading sill height: 64 cm - Brake: yes - Support wheel: yes, automatic - Incl. vehicle documents (letter) - 100 km/h at extra charge Standard equipment: - Designed side wall hinges for very easy attachment of a cargo net - 30 cm high aluminum side walls with robust built-in locks - Hinged front wall. Tethering hooks on the chassis. - U-profile at the rear, for easier attachment of the loading rails - double-walled anodized aluminium drop sides - all drop sides foldable and removable - removable steel corner posts - multiplex wooden floor with anti-slip surface - very stable welded steel frame - frame completely hot-dip galvanized - many cross members for high point loading - additional longitudinal struts welded in throughout - all cross and longitudinal members rest on the floor - 6 lashing brackets recessed inside the side edge (1000DaN / kg) TÜV certified! - Maintenance-free rubber spring axle from BPW - Automatic reverse drive - BPW overrun device and parking brake - Sturdy eccentric locks - Reinforced, sturdy bolted V-drawbar - 13-pin plug - Large safety lighting - Lighting recessed in rear frame, integrated rear fog light - Automatic center support wheel Special equipment included in the price: - Low chassis with tires: 196/50R13C - Loading floor height approx. 64cm Accessories optionally available: - High front grille, 70cm - Tarpaulin + bows - Supports, grilles, side wall attachments, nets etc. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Lasdpfsu Ht Hpox Abksh

Condition: new, Year of construction: 2025, functionality: fully functional, saw blade diameter: 500 mm, power: 10 kW (13.60 HP), New Optimizing saw SALVAPUSH 2000 by SALVAMAC Lsdpfx Absd Tyf Uekjah The automatic optimizing saw SalvaPush_2000 is born from over twenty years of experience in wood optimizing saws. The operator has just to mark the quality of the wood and the presence of defects, the optimizing saw will do the rest. The machine cuts the best possible combination of measures, reducing waste to a minimum and improving productivity, all in total safety. SalvaPush_2000 is a numerically controlled optimizing saw with integrated computer and SALVA-OPTIM software to have a quick and easy communication. Some sections of the program are dedicated to statistic and cutting results, with updates in real time and diagnostic. The touch screen, with USB and teleservice connections, facilitates data reading and typing. By Christian Salvador- SALVAMAC

Condition: good (used), Year of construction: 2022, I sell the automatic pneumatic end cutting saw Salvamac Salvapush 2000, year 2022. Input table automatic feeding 6,10m (pusher system) Outut table 3,00m Total length: 10,50m Ljdpfjvxbmwjx Abkeah Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: used, Year of construction: 2016, operating hours: 60,000 h, functionality: fully functional, Heller FMS with 2 x H2000 Machine make / type: HELLER H2000 Operating hours: 59,654 Year of manufacture: 2016 Control system: Siemens 840D SL Spindle: PC63 10,000 rpm, 38 kW, 242 Nm Tool clamping system: HSK63 Magazine / positions: Chain magazine / 160 positions Convenient operator terminal, setup during machining Rotary table: 360,000° x 0.001° Coolant system: Knoll KF 400/50 bar Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 x 400 Workpiece clamping: Mechanical Additional options, special features: Drill breakage detection (SBBK); FMS interface, infrared receiver probe (Renishaw), extraction interface; coolant cooler Machine make / type: HELLER H2000 Operating hours: 60,546 Year of manufacture: 2016 Control system: Siemens 840D SL Spindle: SC63 16,000 rpm, 40 kW, 96 Nm Tool clamping system: HSK63 Magazine / locations: Chain magazine / 240 locations Convenient operator terminal, setup during machining Rotary table: 360,000° x 0.001° Coolant system: Knoll KF 400/50 bar Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 x 400 Workpiece clamping: Mechanical Additional options, special features: Drill breakage detection (SBBK); FMS interface, infrared receiver probe (Renishaw), extraction interface; coolant cooler Laedpfx Aswh Td Eebkeh Machine make/type FASTEMS FPC750 with expansion container Operating hours: No counter installed Year of manufacture: 2016 Control system: FASTEMS Memory locations: 24 memory locations, 2 setup stations Workpiece clamping: Mechanical Additional options, special features: 20 pallets included Further information and technical specifications upon request.

Year of construction: 2018, condition: new, Potatoe / root peeling machines Lsdpfxjdv Edns Abkoah Productivity 1’500-2200 kg/h vegetable are peeled, washed, polished with rotating drum and brushes Automatic product discharge Simple and effective peeling, washing, polishing Can be attached to the transporter including in production line. 400V/3phase or can make 220V/3phase USA standard

Condition: new, functionality: fully functional, 12 new DEMAG rope guides / rope guide crane hoist parts for DH2000 DH1000 DH500 DH300 new including 3 DH2000/DH1600, 3 DH1000/DH1200, 3 DH500/600, and 3 DH300/400 Info: We have over 20,000 DEMAG spare parts in stock! Laedpfx Abov T Tq Dekjh Check out my other listings from my inventory!

Condition: ready for operation (used), controller manufacturer: Heidenhain, Type: ML120-12000 6 assen gelijktijdig (X / Y / Z / W / B / V) + 2-assige indexeerfreeskop (2,5°) 8 assen gelijktijdig (X / Y / Z / W / B / V) + continue orthogonale freeskop (A: +-120° / C: +-180°) Zware CNC frees- en boormachine / CNC vloerboor- en freesmachine ramgrootte: 630 x 500 mm - ramslag: 1250 mm spindeldiameter 130 mm - slag: 650 mm - zonder freeskop te gebruiken als boor CNC-continue orthogonale freeskop (A: +-120° / C: +-180°) Laedpfx Aexpgf Nsbkjh CNC indexeerfreeskop (2,5°) gereedschapswisselaar voor het automatisch wisselen van twee freeskoppen koeling door spindel gereedschapswisselaar met 60 posities spaantransportband Siemens aandrijvingen en motoren Heidenhain regel- en meetlinialen gewicht van de machine: 60 ton afmetingen van de machine: 19 meter x 12 meter x 6,65 meter TIRT3025 CNC draaitafel continu: - max. 60 ton werkstukgewicht - afmetingen: 3000 x 2500 mm - slag of draaitafel: 2500 mm - max 2 toeren per minuut - gewicht van de tafel: 37 ton - afmetingen: 6500 x 2500 x 1500 mm T-sleuftafels 7600 x 5282 mm - gewicht van de tafels: 50 ton Fresatrice a montante mobile - Freesmachine met mobiele kolom - Fraiseuse-aleseuse avec montant mobile - Fräs-Bohrmaschine mit beweglichem Ständer Longitudinal travel X-axe: 12 000 mm Crosstravel Y -axe: 1250 mm (ram-travel) Travel Z-axe (Height): 3500 mm Power on spindle: 37 kW Admission in millingheadspindle (ISO): ISO 50 Max quill travel Z': 1250 + 650 mm Max speedrange: 6 > 2000 rpm

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Siemens, side channel blower side channel compressor -Type: Elmo-G 2 BH2 000-0AH02 -Drive: 0.2 kW -Speed: 2800 rpm -Dimensions: 250/235/H255 mm Lasdeuqf N Nopfx Abkjh -Weight: 8.6 kg

Condition: excellent (used), Harrison Alpha 1550 XS Manual / CNC Lathe Year: 2018 Ljdjxpnk Tspfx Abkjah Control: FANUC Oi-TF Swing Over Bed: 554mm Swing Over Cross Slide: 370mm Swing in Gap: 830mm Distance Between Centres: 2000mm Spindle Bore: 104mm dia. Spindle Speeds: 1 to 2000 RPM Quick Change Toolpost Boring Bar attachment

Condition: new, Year of construction: 2025, functionality: fully functional, rotor diameter: 480 mm, rotor length: 2,000 mm, power: 110 kW (149.56 HP), rotational speed (max.): 80 rpm, Equipment: rotational speed infinitely variable, Genox BH2000 Series - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 110kW combined motor power (150kW & 180kW options also available) with heavy duty oversized gearboxes, 80rpm shaft speed as standard. 2000mm wide x 480mm diameter Rotor with 95 pcs, 40mm Concave reversible alloy steel blades. 60mm blades are also available. Lodpfoxnan Iex Abkoah Hydraulic force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle.

Condition: used, Year of construction: 1996, Technical details: Ljdpsu Ib Drefx Abksah pressure: 300 t chamfer lenght: 6000 mm control: Delem DA 24e distance between columns: 2x5100 mm throat: 645 mm dayligth: 520 mm plate thickness: 5 mm total power requirement: ca. 10,0 je machine kW weight of the machine ca.: ges. ca. 66 t dimensions of machine: L:12,0xB:2,3xH:3,65 m Hydr. Pressbrake 6000-300 - jib arm length= 720mm - incl. back gauge (without crowning system) adjustment travel horizontal/vertical: 680/200mm motoric Optionally, two of these press brakes can be offered - also applicable as a Tandem Pressbrake with 2x 6 meter with 300t, with table size: W:165xL.12000mm, - program sequence via both presse(synchronized) and single available Optional are tools available! Copy of documentation available i.D. *

Condition: used, Year of construction: 1998, machine/vehicle number: 000373, Comm. no.: Lg 34723 Double decoiler LORENZ HH 2000.2 Used, in good condition year of construction 1998 - machine no. 000373 with - hydraulic spreading and automatic retensioning - belt center adjustment manually via spindle - counterholder with quick clamping - circular protection ring - easily exchangeable clamping cylinder (service-friendly) - manual swiveling - direction of rotation changeover (top-bottom unwinding) load capacity max. 2.000 kg/side strip width max. 300 mm Coil inner diameter approx. 360 to 420 Coil inner diameter approx. 460 to 520 mm Lajdpfxonbdyao Abksh Coil outer diameter max. 1,800 mm with drive via three-phase geared motor and pneu. brake. drive power approx. 2.2 KW/side Unwinding speed approx. max. 40 m/min. Coil limitation via fixed limiting ring at the rear and adjustable counterholder (with quick clamping) at the front. Coiler stand with base frame with lateral shifting for coil center positioning. Currently without electric control. Can be re-engineered and offered on request.

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, HESS RH 2000 complete line, production pallet size 1400-1100, double feeder machine, year of manufacture 2000, stacking and destacking elevator, rack trolley, Doppler, centering device, packaging machine, horizontal strapping, pallet turner, 5 armored mold conveyors, noise-reducing panels, Siemens S7 control. Ljdpfx Ajxliqgobkeah

Condition: like new (used), DYEMANSION Type: POWERSHOT C 2.0 This system has never been put into operation. (as good as new!!) Dyemansion Powershot C blast cabinet Surface-friendly cleaning of powder-based plastic components DYEMANSION POWERSHOT C 2.0 Year of construction: 2021 The industry standard for simple and efficient powder removal Automated depowdering increases your production capacity With the Powershot C, a medium-sized installation space can be depowdered in just ten minutes. The time you need for parts cleaning, and personnel in your production can be significantly reduced. This increases your efficiency. By investing in automated depowdering with the Powershot C up to four manual blasting systems can be replaced. Gentle surface treatment thanks to intelligent hardware functions The blast cabinet of our Powershot C is equipped with a rotating basket and lined with stainless steel. Different blasting nozzles and ionization ensure reproducible results. A basket with a soft, replaceable lining protects the parts from damage during the process. Two simultaneously operating blasting nozzles are arranged perpendicular to the rotating basket and the parts it contains. This configuration guarantees efficient powder removal. High ease of use with improved ergonomics and process control Experience a new level of process control with touchscreen and integrated control panel. The Powershot C is operated via a user-friendly interface and pre-installed programs can be started. Individual programs can be easily configured and saved. The user-centered design makes everything easily accessible and safe to operate. Continuous monitoring enables an efficient and reproducible process. Technical data: POWERSHOT C AUTOMATION Individual programming, control and monitoring of the process parameters via control panel and touchscreen. PERFORMANCE: Processing time: Variable from 1 to 40 minutes, usual throughput time 3 to 10 minutes Capacity per cycle: Up to 3/4 EOS P396, 1x HP Jet Fusion 4200/5200 or nearly 1.5x full Stratasys H350 build space Effective volume of the basket 26 liters DIMENSIONS: System (L x W x H) 1700mm x 1310mm x 2030mm Recommended space requirement in operation (L x W x H) 2500mm x 2915mm x 2300mm WEIGHT: System 480 kg Power: Power 1kW Requirements 3x400V> 1kW 50Hz 2,5A PRESSURE AIR: Consumption Minimum: 1.4m³/min at 2.2bar Maximum: 1.8m³/min at 5bar NOISE EMISSION: Sound level < 80dB(A) Condition: used / second-hand Lajdetq E N Espfx Abkeh Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Year of construction: 1952, bore capacity in steel (diameter) / mm arm length / mm workpiece height max. / mm Lasdpfxsrz S Tts Abkeh total power requirement / kW weight of the machine ca. / t required space / m The pallets lying on the machine are not included in the scope of delivery.

Year of construction: 1955, condition: used, Radial drilling machine, drilling machine, boom drilling machine -Outreach: 2055 mm -Max. Distance from machine table to spindle mount: 1700 mm -Cone mount: MK5 -Motor power: 7.5 kW -Speeds: 11.2-1400 rpm Lasdod Enr Ispfx Abkoh -Columns: Ø 450 mm -Spindle stroke: 540 mm -Thread cutting device -automatic feed: 0.037-2.0 mm/rev -Clamping area: 920 x 1600 mm -Dimensions: 2580/1110/H3450 mm -Weight: 6465 kg

Condition: used, tank capacity: 20,000 l, Location: Bremen Condition: used Volume: 20,000 litres Max. Overpressure: 0.50 bar Tank Specific Weight of Medium (t/m³): 1.37 (t/m³) Design: vertical Base: height-adjustable feet Number of feet: 3 pcs Internal diameter: 2,500 mm Cylindrical height: 3,700 mm Total height: 6,750 mm Equipment Manhole / Dome: in the cylinder Nameplate: Fittings: venting, spray head, lifting lugs Outlet: pipe end approx. Ø 80 mm Note: outlet has been cut off Remarks: 1 tank with a small dent in the cylinder; manhole approx. 340 x 440 mm Previous application: fruit juice industry Product contact material: V2A 1.4301 (AISI304) Material properties Lajdexqc Uijpfx Abkoh Feet material: stainless steel Agitator: agitator flange Agitator Agitator arrangement: side-mounted on the cylinder

Condition: ready for operation (used), nominal power: 65 kW (88.38 HP), Met gas verwarmd Max temperature: 250 °C Capacity: 2650 x 2400 x 1950 mm Voltage: 400V Ledpfx Aexpgdfsbkeah

Condition: used, tank capacity: 2,950 l, Location: Bremen Condition: used Volume: 2,950 litres Vacuum: 0.9 bar Max. overpressure: 2.5 bar Tank Max. operating temperature (tank): 138°C Design: suspended Tank Support type: lug feet Heating/cooling: available Double jacket volume: 148.0 litres Max. permissible operating overpressure: 5.0 bar Max. permissible operating temperature: 151°C Cylinder temperature control: double jacket Heating/cooling jacket Bottom temperature control: double jacket Insulation: available Insulation Insulating jacket: hermetically welded Insulation material: mineral wool Insulating jacket material: stainless steel Insulation thickness: 70 mm Internal diameter: 1,400 mm External diameter: 1,600 mm Cylindrical height: 1,500 mm Total height: 3,500 mm Technical data / dimensions Wall thickness (bottom): 7 mm Wall thickness (cylinder): 10 mm Technical data / dimensions Wall thickness (top): 5.7 mm Technical documentation: drawings, TÜV certificates Features Manhole / dome: in top (DN 500) Nameplate: Features: lifting lugs Lodpfx Absxqadzjkeah Features Outlet: available Notes: 4 stainless steel lugs (V2A); total height stated is an estimate Last application: pharmaceutical Product contact material: V4A 1.4571 (AISI 316) Material quality Temperature control system material: V2A 1.4301 (AISI 304) Agitator Agitator manufacturer: PRG Power: 15 kW Speed: 1,475 rpm Agitator type: dissolver Agitator Voltage: 400 volts Agitator mounting: eccentric, in top Agitator features: additional propeller on the agitator shaft