Used Hurlimann H-657 Xa for sale (25,540)

Condition: used, Year of construction: 2021, operating hours: 657 h, Endress EFA 850 S4 320 ST Light Mast Price: €12,890.00 net / €15,339.10 gross Year of manufacture: 2021 Operating hours: only 657 h Engine: Kubota Luminous intensity: 4 x 320W Light type: LED Area: approx. 4,500 m² Lighthead height: max. 8.50 m Running time: approx. 180 h Noise level: approx. 58 dB(A) Transport dimensions: (LxWxH): 2,200 mm x 1,400 mm x 2,440 mm Installation dimensions: (LxWxH): 3,176 mm x 1,900 mm x 8,500 mm Weight: 980 kg Good condition! Ready for immediate use! We have many other light poles in stock that are immediately available! Mr. Herden (Tel.) will be happy to assist you. We would also be happy to provide you with a financing offer upon request. We are an official Magni telehandler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. Kfsdpfx Afjwac S Ao Soa We are an official Westtech sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are also one of the largest commercial vehicle dealers in Germany with 800 used vehicles. Subject to errors and prior sale! Internal No.: 030269

Condition: new, operating pressure: 210 bar, high-pressure hose length: 20,000 mm, input voltage: 400 V, overall weight: 160 kg, warranty duration: 24 months, temperature: 155 °C, TECHNICAL DATA OF THE KARCHER HDS 10/21-4MXA WASHER: Model: HDS 10/21-4MXA Manufacturer: KARCHER Country of production: Germany Series: Professional Condition: NEW Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 500 - 1000 Working pressure (bar/MPa): 30 - 210 Maximum pressure (bar/MPa): 230 Water heating range (°C): 80-155 Connection power (kW): 7.8 Power cable (m): 5 Weight (kg): 173 Dimensions (L x W x H) (mm): 1330 x 750 x 1210 EQUIPMENT OF THE KARCHER HDS 10/21-4 MXA WASHER: Pressure gun: Karcher Professional !EasyForce Advanced High-pressure hose: Karcher Professional - Longlife series 20M, DN8, 315BAR - !EasyLock Automatic high-pressure hose reel: Professional, originally integrated reel with a capacity of 20m - automatic winding. Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Pressure nozzle POWER Karcher Professional !EasyLock Pressure regulator: Servopress KARCHER !EasyLock RELIABLE | DURABLE | ERGONOMIC In the offered HDS line, the main emphasis is placed on ergonomics and work comfort 4-pole, water-cooled engine Two detergent tanks separated from each other ECO mode allows you to optimize fuel consumption (up to 20%) The set is equipped with an integrated, automatic pressure hose reel that significantly improves work comfort Additional handles allow you to transport the device with additional equipment. The brass pump head and automatic pressure reduction system extend the life of the device. A large water filter protects the pump from impurities that may be present in the water. Kfsdpfx Aev Tbbdjf Soa A standard EASY!Force Advance high-pressure gun with a rotating lance, a 20m high-pressure hose on the reel, a Servopress pressure regulator and a power nozzle EASY!Force technology reduces the force needed to hold the gun trigger to zero. The device also has an EASY!Lock equipment mounting system that allows you to change equipment 5x faster than a traditional thread system. The device is completely new and factory-packed

Condition: used, overall weight: 92,000 kg, axle configuration: > 3 axles, first registration: 08/2006, loading space length: 19,000 mm, loading space width: 3,000 mm, loading space height: 815 mm, total width: 3,000 mm, Equipment: ABS, Goldhofer STZ-H6-57/80A telescopic low loader for wagon transport----                                     Approval          Technical 1 Speed:     80km/h                 65km/h Fifth wheel load:               23,000kg               26,000kg Rear axle load:       10,000kg             11,000kg Total weight:     83,000kg               92,000kg Payload:                52,500kg               61,500kg Own weight: (without accessories):           30,500kg ----Gooseneck: Length: 4,000mm Width: 2,480mm Height: 235mm Seat height: 1,350mm DLR front: 1,420mm DLR rear: 2,700mm King pin 3.5 inches Bevel: bevelled 10 degrees Corners front: bevelled 45 degrees Floor covering: spruce 50mm Seat supports: mechanical Width with side walls: 2,550mm Hydraulic STZ gooseneck with external supports, hydraulically liftable and lowerable with mechanical downpipe supports and hydraulic support cylinders hydromechanical forced steering (2-circuit steering) in flat design (height 235mm) with adjustable guide elements and THP steering cylinders. ----Loading area: Type: Platform Liftable: no Length: 13,000mm Width: 3,000mm Floor covering: sheet metal/spruce 50mm Wheel recesses: no Wider extensions: no Extendable: simply telescopic Length1: 10,000mm Loading heights (loaded) Loading height 1: 815mm Loading area telescopic, designed as an outer and inner tube construction, with 1,070mm long, fixed loading area section at the front. Bolt-link coupling integrated in the fixed loading area section for coupling boiler bridge extension supports, the square rails welded on by us serve as rail tracks in the track widths 1,000 mm (rail spacing 1,015 mm) and 1,435 mm (rail spacing 1,450 mm). Locking of the extension steps by spring-loaded cylinders and conical bushings Loading area height on the frame center tube (outer tube) approx. 815mm (+/- 130mm) Loading area height on the enclosed rail elements approx. 790mm (+/- 130mm) ----Rear chassis: Chassis type: Standard Loading height: 815mm Width: 3,000mm Wheelbase: 1,360mm Floor covering: Sheet metal Extensions: no Wheel recesses: no Excavator recess: no ----Axles: Number of axles: 6 Lift axle: see accessories Axle type: cranked steering knuckle Axle compensation: hydraulic Axle make: BPW/Eco Driving positions: 1 Axle stroke (1) +/-: 130/130mm Axle stroke (2) +/-: 0/0mm Raising/lowering valve: Yes 1st axle can be suspended pneumatically with lifting bellows ----Steering: Number of steering axles: 6 Steering axle arrangement: all steered Steering angle max: 45° Steering type: Hydr. 2 circles----Tires: Dimension: 235/75 r 17.5 143/141 J Tires. Type: twin Rim type: discs Rim centered: centered ----Brake code: according to EU standard: Yes AGS: Yes ALB: Yes ABS: Yes with ABS del: No Parking brake: spring-loaded EBS: No ECAS: No Remark: Brake calculation no.: GH 4324S ----Chassis remark: Steering designed for the extended state with a larger steering angle of the front axles Open wheel cutouts above the wheels with narrow cross arms in between (ALU covers see accessories below) Kfedpelhn Aijfx Af Soa Control elements protected on the left in the direction of travel Rims 17.5x 6.75 Cranked axles!!! ----Rear of vehicle: Design: Standard 90° Ramp fastening: see accessories Floor covering: Sheet metal Overhang from last axle: 1,300mm Support: see accessories ----Load securing: Lashing rings Number: 5 Loadable up to: 10 tons per piece Arrangement: 2 pairs on the SH                         3 pairs on the LF----Rear extension: Max. load capacity 15,000kg with a

Condition: used, overall weight: 92,000 kg, axle configuration: > 3 axles, first registration: 08/2006, loading space length: 19,000 mm, loading space width: 3,000 mm, loading space height: 815 mm, total width: 3,000 mm, Equipment: ABS, Goldhofer STZ-H6-57/80A telescopic low loader for wagon transport----                                     Approval          Technical 1 Speed:     80km/h                 65km/h Fifth wheel load:               23,000kg               26,000kg Rear axle load:       10,000kg             11,000kg Total weight:     83,000kg               92,000kg Payload:                52,500kg               61,500kg Own weight: (without accessories):           30,500kg ----Gooseneck: Length: 4,000mm Width: 2,480mm Height: 235mm Seat height: 1,350mm DLR front: 1,420mm DLR rear: 2,700mm King pin 3.5 inches Bevel: bevelled 10 degrees Corners front: bevelled 45 degrees Floor covering: spruce 50mm Seat supports: mechanical Width with side walls: 2,550mm Hydraulic STZ gooseneck with external supports, hydraulically liftable and lowerable with mechanical downpipe supports and hydraulic support cylinders hydromechanical forced steering (2-circuit steering) in flat design (height 235mm) with adjustable guide elements and THP steering cylinders. ----Loading area: Type: Platform Liftable: no Length: 13,000mm Width: 3,000mm Floor covering: sheet metal/spruce 50mm Wheel recesses: no Wider extensions: no Extendable: simply telescopic Length1: 10,000mm Loading heights (loaded) Loading height 1: 815mm Loading area telescopic, designed as an outer and inner tube construction, with 1,070mm long, fixed loading area section at the front. Bolt-link coupling integrated in the fixed loading area section for coupling boiler bridge extension supports, the square rails welded on by us serve as rail tracks in the track widths 1,000 mm (rail spacing 1,015 mm) and 1,435 mm (rail spacing 1,450 mm). Locking of the extension steps by spring-loaded cylinders and conical bushings Loading area height on the frame center tube (outer tube) approx. 815mm (+/- 130mm) Loading area height on the enclosed rail elements approx. 790mm (+/- 130mm) ----Rear chassis: Chassis type: Standard Loading height: 815mm Width: 3,000mm Wheelbase: 1,360mm Floor covering: Sheet metal Extensions: no Wheel recesses: no Excavator recess: no ----Axles: Number of axles: 6 Lift axle: see accessories Axle type: cranked steering knuckle Axle compensation: hydraulic Axle make: BPW/Eco Driving positions: 1 Axle stroke (1) +/-: 130/130mm Axle stroke (2) +/-: 0/0mm Raising/lowering valve: Yes 1st axle can be suspended pneumatically with lifting bellows ----Steering: Number of steering axles: 6 Steering axle arrangement: all steered Steering angle max: 45° Steering type: Hydr. 2 circles----Tires: Dimension: 235/75 r 17.5 143/141 J Tires. Type: twin Rim type: discs Rim centered: centered Kodelhn Afepfx Af Sefa ----Brake code: according to EU standard: Yes AGS: Yes ALB: Yes ABS: Yes with ABS del: No Parking brake: spring-loaded EBS: No ECAS: No Remark: Brake calculation no.: GH 4324S ----Chassis remark: Steering designed for the extended state with a larger steering angle of the front axles Open wheel cutouts above the wheels with narrow cross arms in between (ALU covers see accessories below) Control elements protected on the left in the direction of travel Rims 17.5x 6.75 Cranked axles!!! ----Rear of vehicle: Design: Standard 90° Ramp fastening: see accessories Floor covering: Sheet metal Overhang from last axle: 1,300mm Support: see accessories ----Load securing: Lashing rings Number: 5 Loadable up to: 10 tons per piece Arrangement: 2 pairs on the SH                         3 pairs on the LF----Rear extension: Max. load capacity 15,000kg with a

Condition: new, Year of construction: 2024, Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Technical data for the shelf trolley: Manufacturer: LPR Type: 600 01x Shelf trolley, new Material color: blue / orange Total height incl. castors: 2,150 mm Total width: 1,550 mm Total depth: 600 mm Number of levels: 03 pcs. Consisting of each: 02x shelf uprights, new Material color: blue Frame profile dimensions: 50 x 50 mm incl. cross and diagonal braces, metal base plates, plastic Cover caps The stands are pre-assembled (bolted framework) 2,000 mm high 600 mm deep 06x workbench crossbars, new Material color: orange Kfedpfx Aodb N Hmjf Sea Design: stepped crossbar Clear width: 1,450 mm Profile dimensions: 80 x 50 mm Shelf load 300 kg with evenly distributed load 12x safety pins, new To secure the length supports against unintentional lifting out 03 x insertion sockets, second choice used Thickness: 22 mm Dimension: 1,430 x 545 mm 02x double-stop swivel castors, new 02x swivel castors, new 08x machine screws: M8 x 20 mm 08x Nuts: M8 08x washers: The pictures serve to illustrate the material. The material color may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days. Our services at a glance: (Prices on request) - Assembly and installation Our general assembly conditions must be observed - Shelf inspection Rack inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all racking systems - Delivery with our own fleet of vehicles (without unloading)

Condition: good (used), Multi-spindle head, multi-spindle drill head, dowel drill head, hardware drill head -Dimensions: 190/85/75 mm -Drilling distance: 26 mm -Medium drill bit: offset by 5 mm Kfjdpfob A I Uljx Af Ssa -Number: 1x drill heads available Price: per piece -Weight: 2 kg/piece

Condition: used, tank capacity: 20,000 l, GENERAL Equipment: Venting/inlet, spray head, crane lugs Design: upright Remarks: 1 tank with a small dent in the cylinder; manhole approx. 340 x 440 mm Internal diameter: 2,500 mm Total height: 6,750 mm Max. overpressure: 0.50 bar Kedpfx Asxqc Uief Sefa Agitator: agitator flange Support design: height-adjustable feet Location: Bremen Nameplate: Volume: 20,000 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,700 mm Last application: fruit juice industry TANK Specific gravity of medium: 1.37 (t/m³) Number of feet: 3 pcs EQUIPMENT Manhole / dome: in cylinder Outlet: pipe end approx. Ø 80mm Note: outlet end cut off MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR 1 Agitator arrangement: side-mounted on cylinder

Condition: used, Year of construction: 2005, total height: 1,200 mm, total length: 8,120 mm, total width: 850 mm, Weight: 1.240 kg - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: 535 - Main motor power [kW]: 6.0 - Min. saw blade diameter[mm]: 500 - Max. saw blade diameter [mm]: 550 - Options: Automatic pusher system Kodpfx Afex A S Upj Ssfa - Voltage [V]: 400 - Power [kW]: 6.0 - Transport dimensions: 8120mm x 850mm x 1200mm (l x w x h) - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2009, Manufacturer: H&G Model: HG/SV 11 Kodpfx Afox Hyfyo Sofa Weight: 1800 kg Engine power: 11 kW

Condition: good (used), Schneider Senator PL1 Q-600-H Paper Stack Lift This machine is in perfect condition, practically new. Hydraulic drive, state-of-the-art hydraulic unit. 400V power supply. Automatic and manual lifting cycles, fast operation. Load capacity: 600 kg. Pallet/sheet dimensions: 760 x 1090 mm Ksdpfx Afex Hqlwe Sofa

Condition: good (used), Technical data for the pallet racking upright: Racking system: Dexion Type: S 4 Included in delivery: 01x pallet racking upright, used Material color: Sendzimir galvanized Type: H Ksdpfoxxq Tvjx Af Sofa Profile dimensions: 81.7 x 77.21 x 2.5 mm Including horizontal and diagonal braces, base plates. The uprights are pre-assembled (bolted truss construction) Height: 11,050 mm Depth: 1,100 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Transport or shipping of this item is associated with additional costs, which can be specifically requested from us depending on the delivery location and scope of delivery.

Condition: good (used), Countersink, cone countersink -Sizes: 2x20/2x30/3x45/4x60 mm -Countersink: 90° Manufacturer: Bilz Kfodpfxjb A Rcco Af Ssa -Sale: only complete set -Weight: 5 kg

Condition: used, tank capacity: 2,950 l, GENERAL Equipment: Crane lugs Design: suspended Remarks: 4 feet made of V2A; total height stated is estimated Speed: 1475 rpm Outer diameter: 1,600 mm Inner diameter: 1,400 mm Total height: 3,500 mm Heating/cooling: available Insulation: available Power: 15 kW Max. permissible operating temperature: 151 °C Max. permissible operating overpressure: 5.0 bar Max. overpressure: 2.5 bar Agitator: Dissolver Support type: feet Location: Bremen Ksdpfx Asxqadzof Sofa Technical documentation: drawing, TÜV papers Cylinder temperature control: double jacket Nameplate: Vacuum: 0.9 bar Volume: 2,950 litres Double jacket volume: 148.0 litres Cylinder wall thickness: 10 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,500 mm Last application: pharmaceutical TANK Max. permissible operating temperature: 138 °C HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulating jacket: hermetically welded Insulation material: mineral wool Insulating jacket material: stainless steel Insulation thickness: 70 mm EQUIPMENT Manhole / dome: in upper head (DN 500) Outlet: available MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) AGITATOR 1 Agitator manufacturer: PRG Voltage: 400 volts TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 7 mm Agitator arrangement: offset in upper head Agitator equipment: additional 1 propeller on agitator shaft Top head wall thickness: 5.7 mm

Condition: used, Year of construction: 2007, total height: 1,750 mm, total length: 1,000 mm, total width: 1,810 mm, Weight: 1.240 kg - Year: 2007 - Documentation available: No - CE marking present: Yes - CE certificate present: No Kodpfx Afjwniuas Sjfa - Serial number: 100658 - Main motor power [kW]: 7.5 - Arbor saw blade diameter [mm]: 30 - Voltage [V]: 400 - Power [kW]: 8.0 - Transport dimensions: 1000mm x 1810mm x 1750mm (l x w x h) - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm - NEW, immediately available from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. For the advantages of a hooked cantilever arm, see illustrations. Shelf consists of: - 4 uprights, including base section approx. 400 cm, made of IPE180. - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. - Includes all necessary fasteners and screws. Price: Kfjdpfjx Itrvsx Af Ssa €1,995.00 net €2,374.05 gross You will receive an invoice with VAT. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.

Condition: good (used), Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge -Type: HLP 220 V 500 W -Length: 165 mm -Diameter: 13 mm Kfedpeb A Sdasfx Af Sea -Price: per piece -Quantity: 4x Available -Weight: 0.2 kg

Condition: used, HM-ZN 8500 undercutting saw Serial number: 277 Connection Voltage: 400V- 6,6KW Weight: 1400 KG Saw blade max: 700mm Saw blade min: 600mm Bore: 30mm Saw blade tiltable Length automatic feed: 9500 mm Length output conveyor: 4300 mm Total dimensions: 15000x1500x1800 mm (LxWxH) - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Kfjdpfownhz Sex Af Ssa

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 400 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 200 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 400 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. Kodjx Itrpjpfx Af Ssfa - No slotted hole system, so no weakening of the stand profile. Price: €2462.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: good (used), Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge -Type: HLP 230V 500W -Length: 90 mm -Diameter: 13 mm -Price: per piece -Quantity: 9x Available Kedeb A Sc Ujpfx Af Sefa -Weight: 0.2 kg

Condition: used, Year of construction: 2002, - Year: 2002 - Documentation available: No - CE certificate present: No Kedewnh T Ispfx Af Sofa Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Kodox Itrcjpfx Af Sefa Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2265.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: good (used), Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge Kedpfsb A Sdbsx Af Sjfa -Type: HLP 220V 800W -Length: 140 mm -Diameter: 13 mm -Price: per piece -Quantity: 12 available -Weight: 0.2 kg

Condition: used, Year of construction: 2001, Undercut cross-cut saw HM-D 6500-R Serial number: 319 Connection Voltage: 400V- 11KW Weight: 2450 KG Saw blade max: 550 mm Saw blade min: 500mm Bore: 30mm Length automatic feed: unknown Kfsdpfx Aowng Sisf Sea Available from August 2024 - Year: 2001 - Documentation available: No - CE certificate present: No - Serial number: 319 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2020, Cantilever rack NEW Data : - H : approx. 416 cm - D : approx. 137 cm - L : approx. 402 cm Kfedpex Itq Eefx Af Soa - Cantilever arms : approx. 120 cm - Axial dimension : 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - incl. all necessary connecting elements and screws. Why BLT cantilever racking ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright foot and upright back are welded together, providing additional safety and short assembly times, as the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 2578,00 € net + statutory value added tax. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, approx. 14 running meters, height: 550 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 550 cm - Depth : approx. 110 cm - Length : approx. 14 running meters - Load: 3000 kg shelf load Kjdpfx Afsx Irdkj Sjfa - Galvanized uprights - Crossbars 270 x 14 x 5 cm, T30 - Crossbars in orange - New BLT / PR55 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 06 x upright approx. 550 cm x 110 cm, disassembled. - 30 x crossbar approx. 270 x 14 x 5 cm, T30. - 60 x safety pins. - Levels: Floor + 3 - 60 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2220,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.