Used Hurlimann H-656 Xa for sale (55,642)

Condition: excellent (used), Item description: m&h infrared touch probe IRP25.41 SK40 Hexagon Duodpsyhbc Iofx Af Den ----- Condition of the item: Very good condition and fully functional. Receiver is not included. Requires receiver IRR91.40. The item comes from a company liquidation. Internal number: 26.114

Condition: new, mileage: 50 km, power: 129 kW (175.39 HP), color: white, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, central locking, power assisted steering, - Mr. Rudolph will be happy to assist you by phone at: 3.0 l D EVIe engine, 129 kW (176 hp), 6-speed manual transmission FPT 2850.6, leaf-spring rear suspension, twin rear tires, standard chassis variant with single cab, wheelbase 3,450 mm, standard seatbelt color, fabric seat covers, 4G Connectivity Box including TCO service contract, digital tachograph 4.1, light and rain sensor, blind spot assistant on passenger side (BSIS), lane departure warning system (LDWS), tire pressure monitoring system (TPMS), front area monitoring (MOIS), advanced emergency braking system (AEBS) with city brake, Daily MY 2024, electrically adjustable and heated exterior mirrors, vehicle width 2,000 mm, driver drowsiness attention warning system, warning triangle, design and dimensions per ECE-27 guidelines, grab handle on A-pillar, traffic sign recognition with intelligent speed assistant (ISA), electric windows for front entry doors, front airbags for driver and passenger with belt tensioners, speed limiter 90 km/h, 20-liter AdBlue tank under cab, 3.5 t towing capacity, 90 l fuel tank, comfort sound insulation, full-LED headlights, additional speed limiter, body lighting switch, 12V 13-pin trailer socket, automatic battery disconnect switch, blind spot radar behind cab, reversing camera, roof shelf above windshield, pre-installation for toll system (OBU), automatic trailer coupling at SQT, ball-type trailer hitch, rear axle ratio i 4.556, White IC 194, 225/75 R 16 M+S tires, USB sockets on driver and passenger side, My Iveco 10-inch infotainment system with navigation, integrated Alexa voice assistant, passenger bench with multifunction shelf and storage compartment, fog lights, air conditioning with automatic climate control, adaptive cruise control (ACC), comfort headrests, seat heating, auxiliary hot water heater, luxury driver's seat with armrest and lumbar support, adjustable in height, tilt, and lengthways, hydraulically sprung, heated, heated windshield, Traction Plus with hill descent control, rear cab wall with window, differential lock on drive axle, Meiller long material carrier with cab protection on front wall for Daily with three-way tipper, Meiller three-way tipper 3.60 x 2.20 x 0.35 m including lashing eyes and access ladder. We are happy to make you an offer for the trade-in of your used vehicle. If you wish to lease or finance your vehicle, we will be happy to provide you with a customized offer. Subject to errors and prior sale! Mr. Rudolph will be happy to assist you by phone at: For more information, please visit our website: ... ESP, navigation system, particulate filter Duedpfx Asygch Njf Dsn = Additional Information = Engine displacement: 2,998 cc Gross vehicle weight: 6,000 kg Cargo space dimensions (LxWxH): 3,600 x 2,200 x 350 mm Please contact Tobias Ebert for further information.

Condition: good (used), functionality: fully functional, Year of construction: 2020, operating hours: 4,400 h, load capacity: 3,000 kg, lifting height: 5,950 mm, free lift: 1,600 mm, fuel type: diesel, mast type: triplex, construction height: 2,650 mm, Equipment: fork extension, pallet forks, retractable fork, sideshift, Load capacity 3000 kg Linde H 30 Diesel Mast type: Triplex full free lift Year of manufacture: 2020 Operating hours: 4400 Lifting height approx. 5950 mm Overall height approx. 2650 mm 3rd and 4th valve double auxiliary hydraulics Sideshift + telescopic forks (alternative attachments available on request) Gross price 29631 / Net price 24900 Available mid-February Looking for another forklift or high-lift pallet truck? LPG, electric, diesel? Contact us and we will find the right vehicle for you. Subject to error and prior sale. Dodpfx Afsygcr Ie Doun Sale only to businesses, without warranty.

Condition: ready for operation (used), punching pressure 45.0 t punch diameter 22 in 15.0 mm punch diameter 38 in 8.0 mm round bar steel 30.0 mm Duedjxaat Uspfx Af Djn square edge steel 25.0 L-beam 100 x 10.0 mm shear: flat material 300 x 12.0 mm adjustment of stroke 0 - 55 mm work height max. 940 / 1140 mm strokes per minute 34 punch diameter max. 110 mm voltage 400 V total power requirement 4.5 kW weight 1245 kg dimensions 1520 x 590 x 1700 mm In good condition (!!) New price ~ 13.000 Euro Special price upon request Features: - Robust electro-hydraulic profile steel shear - With multiple workstations: * Punching station * Flat steel shear * Angle/profile steel shear * Notching station - Continuously adjustable stroke - Very compact design - Support table at the notching and punching station - Side support surfaces - 1x freely movable foot switch - Central lubrication system - Connection cable + connector

Condition: new, operating pressure: 200 bar, empty load weight: 206 kg, input voltage: 400 V, warranty duration: 24 months, temperature: 155 °C, KARCHER HDS 13/20-4 SXA PRESSURE WASHER TECHNICAL DATA: Model: HDS 13/20-4 SXA Manufacturer: KARCHER Country of manufacture: Germany Series: Professional Condition: NEW Catalog number: 1.071-936.0 Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 600 - 1300 Working pressure (bar/MPa): 30 - 200 Maximum pressure (bar/MPa): 230 Water heating range (°C): 80-155 Connection power (kW): 9.5 Power cable (m): 5 Weight (kg): 206 Dimensions (L x W x H) (mm): 1330 x 750 x 1060 KARCHER HDS 13/20-4 SXA PRESSURE WASHER EQUIPMENT: Pressure gun: Karcher Professional EasyForce Advanced Automatic high-pressure hose reel: Professional, originally integrated hose reel with a capacity of 20 m - automatic rewind. High-pressure hose: Karcher Professional - Longlife series 20M, DN8, 315BAR - !EasyLock Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Karcher Professional POWER pressure nozzle !EasyLock Pressure regulator: KARCHER Servopress !EasyLock WHY CHOOSE THE HDS 13/20-4 SXA? The HDS 13/20-4 SXA is ideal for medium- and large-scale industrial facilities where cleanliness is paramount. This hot water pressure washer is also successfully used by transport companies, automotive repair shops, and agriculture. It is also suitable for private customers who value the highest cleaning standards. The SXA version of the pressure washer is equipped with an automatic hose reel with a 20-meter pressure hose, which significantly improves comfort and safety during operation. RELIABLE | DURABLE | ERGONOMIC The HDS line emphasizes ergonomics and work comfort. 4-pole, water-cooled motor Two separate detergent tanks Dedpfx Afsxxkpde Dsun ECO mode optimizes fuel consumption (by up to 20%) The unit is equipped with an integrated, automatic hose reel for pressure hose, which significantly improves work comfort. Additional handles allow for transporting the unit with additional accessories. The brass pump head and automatic pressure reduction system extend the unit's lifespan. A large water filter protects the pump from contaminants that may be present in the water. The standard equipment includes an EASY!Force Advance high-pressure gun with a rotating lance, a 20m high-pressure hose on an automatic reel, a Servopress pressure regulator, and a power nozzle. EASY!Force technology reduces the force required to hold the gun trigger to zero. The device also features the EASY!Lock accessory mounting system, allowing for 5x faster accessory changes than traditional threaded systems. The device is brand new and factory-sealed.

Condition: new, operating pressure: 210 bar, high-pressure hose length: 20,000 mm, input voltage: 400 V, overall weight: 160 kg, warranty duration: 24 months, temperature: 155 °C, TECHNICAL DATA OF THE KARCHER HDS 10/21-4MXA WASHER: Model: HDS 10/21-4MXA Manufacturer: KARCHER Country of production: Germany Series: Professional Condition: NEW Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 500 - 1000 Working pressure (bar/MPa): 30 - 210 Maximum pressure (bar/MPa): 230 Water heating range (°C): 80-155 Connection power (kW): 7.8 Power cable (m): 5 Weight (kg): 173 Dujdpov Tbbdjfx Af Den Dimensions (L x W x H) (mm): 1330 x 750 x 1210 EQUIPMENT OF THE KARCHER HDS 10/21-4 MXA WASHER: Pressure gun: Karcher Professional !EasyForce Advanced High-pressure hose: Karcher Professional - Longlife series 20M, DN8, 315BAR - !EasyLock Automatic high-pressure hose reel: Professional, originally integrated reel with a capacity of 20m - automatic winding. Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Pressure nozzle POWER Karcher Professional !EasyLock Pressure regulator: Servopress KARCHER !EasyLock RELIABLE | DURABLE | ERGONOMIC In the offered HDS line, the main emphasis is placed on ergonomics and work comfort 4-pole, water-cooled engine Two detergent tanks separated from each other ECO mode allows you to optimize fuel consumption (up to 20%) The set is equipped with an integrated, automatic pressure hose reel that significantly improves work comfort Additional handles allow you to transport the device with additional equipment. The brass pump head and automatic pressure reduction system extend the life of the device. A large water filter protects the pump from impurities that may be present in the water. A standard EASY!Force Advance high-pressure gun with a rotating lance, a 20m high-pressure hose on the reel, a Servopress pressure regulator and a power nozzle EASY!Force technology reduces the force needed to hold the gun trigger to zero. The device also has an EASY!Lock equipment mounting system that allows you to change equipment 5x faster than a traditional thread system. The device is completely new and factory-packed

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 70058398, Demag motor : ZBA132 B4 B050 ( Construction to Demag gearbox type : A70D-H-1 i = 16,7 ) Motor has got extra cooling fan . Dusdpfx Afeuhpi Hs Den Price on request Condition : new !

Condition: used, mileage: 80,000 km, power: 121 kW (164.51 HP), first registration: 08/2021, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 10/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,350 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Equipment: air conditioning, central locking, Citroen Jumper, 23-08-2021, VF7YDCNAU12S45621 Dsdpfx Aoyh Igwjf Djun * Power steering * Partition wall * Central locking Speed control: Cruise control Air conditioning: Air conditioning Cooling system Carrier Xarios 350 down to -20°C Payload: 700 kg Cargo compartment (internal): L 4.35 m x W 2.0 m x H 2.0 m The vehicle is in very good condition! TÜV valid until 10/2027 Financing available via Santander Bank.

Condition: used, Year of construction: 2008, operating hours: 2,721 h, machine/vehicle number: CD114564, fuel type: diesel, Empty weight: 6.340 kg Dsdoyhlixjpfx Af Deun Lifting capacity: 500 kg Working height: 1.500 cm Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Transport dimensions (LxWxH): 5.3x2.25x1.91 Please contact PFEIFER GROUP for more information

Condition: good (used), mileage: 42,828 km, power: 105 kW (142.76 HP), first registration: 12/2021, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 3,670 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, total length: 6,170 mm, total width: 2,020 mm, total height: 2,640 mm, loading space length: 3,320 mm, loading space width: 1,780 mm, loading space height: 1,920 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, traction control, trailer coupling, = Additional options and accessories = - None - Partition wall = Notes = Configuration: 4x2, Curb weight: 2,221 kg, Gross weight: 3,500 kg, Tow bar, Cabin type: single cab, Cruise control, Air conditioning, Number of airbags: 1, Auxiliary heater, Rear wiper, Parking assistance: None, Electric windows, Electric mirrors, Partition wall, Radio/cassette, Color: White, Rear view camera, Lighting type: Halogen lamp, Climate control, Bluetooth, Engine power: 105 kW (141 HP), Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: extended, additionally raised, Rear step, Roof rack: None, Side doors: 1, Rear closure: double doors, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat material: Fabric, Seat adjustment: Manual, L2H2 Mbux Automatic Airco Euro6 143HP Distronic Towbar!, Spare wheel, Spare wheel tread depth: 4%, Tire type: All-season tires = Further information = Dodjx Ehgtspfx Af Deun General information Number of doors: 1 Registration number: KLEYN1 Axle configuration Tire size: 235/65R16 Brakes: Disc brakes Suspension: Leaf suspension Axle 1: Left tire tread: 4 mm; Right tire tread: 3 mm Axle 2: Left tire tread: 6 mm; Right tire tread: 7 mm Weights Unladen weight: 2,221 kg Payload: 1,279 kg Gross vehicle weight: 3,500 kg Functional Load platform height: 61 cm Condition Technical condition: good Visual condition: good Damages: none Number of keys: 2 Financial information Leasing rate: €463 per month (delivery van, 72 months); Please ask for further information and terms

Condition: new, empty load weight: 4,580 kg, maximum load weight: 14,420 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,420 mm, loading space height: 1,800 mm, loading space volume: 24 m³, suspension: other, tire size: 435/50 R 19,5, color: other, gearing type: other, front tire size: 435/50 R 19,5, rear tire size: 435/50 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading area approx. 5700 mm x 2420 mm, side walls 600 mm + 2 x 600 mm add-on side walls, complete side wall height approx. 1800 mm, side walls hot-dip galvanized, loading height approx. 1080 mm, 12 x lashing eyes in the floor, reinforced geared support winch with load and fast gear at the front, 2 x folding supports at the rear, 435/50 R 19.5, , chassis and tipper body hot-dip galvanized, , surcharge for:, aluminum ramps, price: 1600 euros, , --  Subject to printing errors, errors and changes, sample images --, more data at: !, more details: ! Duodpfoyhy Awex Af Djn

Condition: ready for operation (used), Year of construction: 2019, total height: 2,050 mm, overall weight: 4,500 kg, travel distance X-axis: 260 mm, travel distance Y-axis: 260 mm, travel distance Z-axis: 100 mm, number of axes: 3, This 3s Matsuura Lumex Avance 25 hybrid metal printer was manufactured in 2019. It features a hybrid system combining metal laser sintering and high-speed milling, with a maximum workpiece size of 250 × 250 mm and a table load capacity of 90 kg. The spindle speed ranges from 450 to 45,000 rpm, accommodating a tool magazine of 20 tools. Consider the opportunity to buy this Matsuura Lumex Avance 25 metal 3D printer. Contact us for further details. • Working hours: 2,000 h • Technology: Hybrid system (metal laser sintering + high-speed milling on a single platform) • Laser type: Yb fiber laser • Laser power: up to 400 W • Layer thickness: 0.05 mm • Build/work area: • Max workpiece size: 250 × 250 mm • Table size: 270 × 270 mm • Axes/travels: • U-axis (sintering table): 185 mm • W-axis (powder blade): 522 mm Duodpfx Asyhcxksf Djn • Spindle (milling): • Tool holder: BT20 (special Matsuura taper) • Tool magazine: 20 tools • Accuracy: • Positioning accuracy (X/Y/Z): ±0.0025 mm • Repeatability (X/Y/Z): ±0.001 mm • Materials (typical): Tool steels, maraging steel; stainless steels (e.g., 316L, 630); titanium alloys (Ti‑6Al‑4V, Ti‑6Al‑7Nb) • Machine data: • Power supply: AC 200/220 V, 50/60 Hz • Installed power: approx. 39 kVA • Inert gas: Nitrogen / Argon

Condition: new, empty load weight: 4,580 kg, maximum load weight: 14,420 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,420 mm, loading space height: 1,800 mm, loading space volume: 24 m³, suspension: other, tire size: 435/50 R 19,5, color: other, gearing type: other, front tire size: 435/50 R 19,5, rear tire size: 435/50 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading area approx. 5700 mm x 2420 mm, side walls 600 mm + 2 x 600 mm add-on side walls, complete side wall height approx. 1800 mm, side walls hot-dip galvanized, loading height approx. 1080 mm, 12 x lashing eyes in the floor, reinforced geared support winch with load and fast gear at the front, 2 x folding supports at the rear, 435/50 R 19.5, , chassis and tipper body hot-dip galvanized, , surcharge for:, aluminum ramps, price: 1600 euros, , --  Subject to printing errors, errors and changes, sample images --, more data at: !, more details: ! Dsdpfxoygrn Eo Af Dsun

Condition: good (used), mileage: 44,539 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,300 mm, first registration: 01/2024, loading space length: 990 mm, loading space width: 1,400 mm, loading space height: 1,300 mm, emission class: euro6, color: black, driver cabin: day cab, suspension: other, tire size: 215/65R16, number of seats: 9, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, cruise control, navigation system, traction control, = Additional Options and Equipment = - Electric window regulators - Electric mirrors - Tinted windows - None = Notes = Configuration: 4x2, Unladen weight: 2380 kg, Gross weight: 3240 kg, Cruise control, Air conditioning, Number of airbags: 6, Parking sensors: front and rear, Tinted windows, Electric window regulators, Electric mirrors, Radio/cassette, Carplay, GPS navigation, Color: black, Metallic, Rearview camera, Lighting type: Bi-Xenon, Seat heating, Bluetooth, Engine output: 125 kW (168 hp), Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: extended, Roof rack: none, Side doors: 1, Side windows: 4, Rear closure: double doors, Central locking, Seating capacity: 9, Seating configuration: 3+3+3, Upholstery: fabric, Seat adjustment: manual, L2H1 passenger bus Combi 9 persons 2x Air Conditioning Automatic PDC Navi Cruise Euro6 170 HP!, Spare wheel, Tire type: winter tires = Further Information = General Information Number of doors: 1 License plate: KLEYN1 Axle Configuration Tire size: 215/65R16 Brakes: disc brakes Axle 1: Tire tread left: 7 mm; Tire tread right: 6 mm; Suspension: coil spring Axle 2: Tire tread left: 10 mm; Tire tread right: 10 mm; Suspension: leaf spring Dimensions Dimensions (L x W x H): 535 x 195 x 198 cm Weights Curb weight: 2,380 kg Payload: 860 kg Gross vehicle weight: 3,240 kg Functional Loading area height: 55 cm Dusdjydu I Ajpfx Af Don Maintenance APK (roadworthiness inspection): valid until 03.2026 Condition Technical condition: good Visual condition: good Damages: none Number of keys: 2 Financial Information Lease price: €529 per month (panel van, 72 months); Please inquire for further information and terms

Condition: new, For sale: new, unused KSB Etachrom B industrial pump – complete, in original packaging, with manufacturer’s documentation. Dusdpfx Ajyhhqxsf Djn The pump is designed for industrial and process applications – high-quality workmanship, made in Germany. Technical data (from the nameplate): Manufacturer: KSB Series / Type: Etachrom B Flow rate (Q): 18.0 m³/h Head (H): 45.0 m Impeller diameter: Ø 181 mm Rotational speed: 2904 rpm Operating pressure: PN10 Medium viscosity: 1.0 mm²/s Year of manufacture: 2023 Made in Germany Certifications: CE, EAC, UKCA Condition New – ex stock Never commissioned Original box Operating/installation manual included Condition exactly as pictured Applications Industrial installations Process systems Cooling, process water Technical and production installations

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm Djdpfjw S Efzsx Af Deun revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Condition: used, Year of construction: 2020, Sehr kompakt gebautes Wasserkühlgerät / Very compactly built Watercooled Chiller Kühlgerät / Chiller ef cooling Ernst H. Furrer EVO 60 Typ WKL 520 Wasserkühlgerät / Watercooled Chiller Baujahr / Year 2020 - Serial-No. 0520.008/36732 Kälteleistung / Cooling capacity 60kW Kondensationsleistung / Condensation performance 84kW Anzahl Kältekreisläufe 1 / Number of refrigeration circuits 1 Duodpfexlkg Aex Af Djn Kältemittel je Kältekreislauf / Refrigerant per refrigeration circuit R410A, 4.4kg 2 Verdichter / Compressor Pumpe / Pump CM 10-5 Grundfos Wärmetauscher / Heat exchanger  Technische Dimensions: Length / Width / High 1800 x 850 x 2153mm Gewicht / Weight 640kgs Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 500 mm, overall weight: 2,000 kg, repeat accuracy: 0.01 mm, TECHNICAL DETAILS Measuring range X-axis: 700 mm Measuring range Y-axis: 600 mm Measuring range Z-axis: 500 mm Djdpsyfz Uljfx Af Djun Repeatability: 0.01 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,790 x 1,500 x 2,730 mm Net weight: 2,000 kg EQUIPMENT Workstation (PC incl. software and monitor, 690 x 1,150 x 1,250 mm)

Condition: ready for operation (used), Year of construction: 2021, operating hours: 13,392 h, spindle motor power: 13,000 W, spindle speed (max.): 6,000 rpm, controller manufacturer: SIEMENS, controller model: 840D with ShopTurn 3G, number of axes: 3, This 3-axis DMG MORI CTX Alpha 500 V6 was manufactured in 2021. A versatile turn-mill centre featuring a Siemens 840D controller, ERGOline interface, and CELOS manufacturing support. It offers a 470 mm machining length, 6000 rpm max speed, and a 12-position Sauter turret with live tooling. Ideal for complex machining tasks. Contact us for more information about this machine. Additional equipment • CELOS Products • DMG MORI Service Agent • DMG MORI NetService • DMG MORI IoT Connector • DMG MORI Messenger V2 SERVICE Camera • Tail Stock • the 2 SMW-Autoblok BBD17/52 which can also be seen on the machine chuck. • and the addition of the software (tccentric turning and milling cycle, as well as a deburring toothing cycle). Machine Benefits Technical Machine Benefits • Hydraulic cylinder with Ø52 mm through-hole • 12-position sauter turret • Vdi 30 tool mounting (din 69880-30) Dusdpfx Afjx D Efwe Den • Live tool interface (din 5480 standard) • Direct measuring scale on the x-axis • Tool system for turret: trifix® system (din 69880, vdi 3425, din 5480) • Y-axis: ±40 mm travel Extra Information Main Spindle Chuck SMW-Autoblok BBD 170/52 Counter Spindle Chuck SMW-Autoblok BBD 175/52 Counter Spindle Option Programmable tailstock force: Adjustable between 80-300 daN Media Coolant filtration: Dual-cartridge filter (50 μm) Coolant cleaning: External flushing system for spindles Coolant tank with 6-bar pump Automation Bar machining package: Fully hydraulic cylinder Ø52 mm Workpiece catcher with conveyor for parts Ø51 × 185 mm (max 3 kg) 4-color operating mode signal light Bar loader interface compatible with IEMCA, Breuning IRCO, LNS

Condition: used, Year of construction: 1966, Overview  This filler and capper block was manufactured in 1966 by German company H&K (H&K VVF 14/3). The machine underwent a general overhaul in 2016, including extensive mechanical and electrical refurbishments. Additional sealing components were renewed in 2023. Technical data  Capacity: 2,500 bph Formats: Prepared for 0.33 L Longneck Filling temperature: 6°C Overhaul & refurbishment details General overhaul in 2016: Pre-evacuation New rotary ball connection New stainless-steel table New electrics New valve control cabinet in stainless-steel design 0.33 L guiding set Sihi vacuum pump Renewed in 2023: Seals on lifting cylinders and filling valves Vacuum and overpressure valves equipped with new seals and springs Duedpfoyb Sdvsx Af Don

Condition: used, Year of construction: 2016, Overview The filling line for glass bottles (non-refillable and refillable) was in operation at a small brewery in Germany until recently. The line is set up for 0.33l longneck bottles and can fill up to 2,500 bph. The machine is still in operation and can be inspected at any time after consultation. The bottle washer and the unpacker can also be purchased separately.  Technical details  Capacity: 2.500 bph Formats: set up for 0.33l longneck  Filling temperature: 6°C  Packaging:  0,33l Longneck in 24er folding box  0,33l Longneck in 24er modular box Individual machines / line components  New glass lifter | Füllmeister | - | 2016 Filler + capper | H&K | VVF 14/3 | 1966 2016 general overhaul (with pre-evacuation - new rotary ball connection - new stainless steel table - new electrics - new valve control cabinet in stainless steel design - 0.33 liter guide set - Sihi vacuum pump.) Seals on lifting cylinders and filling valves renewed 2023 Vacuum and relief valves fitted with new seals and springs 2023 Bottle unpacker | Joha | - 1982 Packing head for 24 bottles in modular crate  Bottle washer | Silmo | Praktika | 1983 Bottles per row: 12  Label discharger Labeler | Krones | Vinetta | 1999 Type 480-6-3-180      Labelling station for back labels Labelling station for breast labels and neck loops  Three glue pallets and gripper sponges each Glue pallets, gripper sponges and sponge roller at bottle discharge new 2023  Glue pump Krones Unipump-H with glue heater  Packer | Pexco | - | - 1 head for 24 bottles in module box 2016 new electrics installed and machine overhauled  Residual liquid and finish control | Miho | LC2000 | Residual liquid detection from bottle cleaning machine  Control of bottle mouth for crown cork/metal Incl. balancing screen from Silmo for visual control of the cleaned bottles Crate washer | Fleischer | - | -  For cleaning of plastic empty crates, in longitudinal run Module size: 300x400mm  Overhauled in 2016 Compressor | Alup | Allegro 19-10 | 2016  Oil-free 4897 operating hours  Transport Bottle transport: various conveyor belts + 90° bends  Crate transport/ roller conveyor: 2016 overhauled with stainless steel cheeks and feet Dedsl Hx Rpepfx Af Doun

Condition: used, mileage: 956,193 km, power: 324 kW (440.52 HP), first registration: 12/2013, fuel type: diesel, empty load weight: 9,030 kg, maximum load weight: 8,970 kg, overall weight: 18,000 kg, tire size: 315/60 22,5, tire condition: 60 %, axle configuration: 4x2, wheelbase: 3,500 mm, next inspection (TÜV): 11/2024, brakes: retarder, color: silver, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, number of beds: 1, Year of construction: 2013, operating hours: 956,193 h, front tire size: 315/60 22,5, rear tire size: 315/60 22,5, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, fog lights, onboard computer, parking heater, sliding door, spoiler, trailer coupling, truck registration, Reference number for inquiries: 68070 MAN TGX * Year of manufacture: 2013 * ABS (Anti-lock Braking System) * Trailer coupling * EBS (Electronic Braking System) * Power windows * Cab Dodpfxeyiby Ts Af Djun * Air conditioning * Automatic climate control * Leather interior * Retarder / ZF Intarder * Power steering * Sleeper berth * Heated seats * Auxiliary heater (independent vehicle heater) * Stationary air conditioning unit * Cruise control * On-board computer * Differential lock * Digital tachograph * CD radio * Lane departure warning system * OBU preparation (on-board unit) * Refrigerator * Electric windows and mirrors * AdBlue tank * Roof spoiler * Fog lights * Comfort air suspension seat * Toolbox * Multifunction steering wheel * Sun visor * Lane change warning * Air suspension * Inspections: General inspection/emissions test (HU/AU) valid until 11/2024 * Transmission: Automatic * Suspension: Air/Air * Gross vehicle weight: 18,000 kg * Curb weight: 9,030 kg * Payload: 8,970 kg * Permissible gross weight: 18,000 kg * Tyre condition, 1st axle: 70% / 60% – Tyre size: 315/60 R22.5 * Tyre condition, 2nd axle: 50%|50% – Tyre size: 315/60 R22.5 * Wheelbase: 3,500 mm * Tyre size: 315/60 R22.5 * Adjustable fifth wheel * 2x trailer couplings Disclaimer: Specifications subject to change, prior sale, and errors excepted. Additional images and videos available on our website. Our comprehensive services include: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing solutions * Assistance with all (export) documentation * Arrangement of export and customs registration plates * Vehicle preparation: new tarpaulins, signwriting, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Delivery of commercial vehicles Contact our trained sales staff—we are happy to advise you.

Condition: used, mileage: 1,269,050 km, power: 345 kW (469.07 HP), first registration: 09/2011, fuel type: diesel, empty load weight: 9,000 kg, maximum load weight: 9,000 kg, overall weight: 18,000 kg, tire size: 315/60 22,5, tire condition: 50 %, axle configuration: 4x2, wheelbase: 3,700 mm, brakes: retarder, color: silver, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, number of beds: 1, Year of construction: 2011, operating hours: 1,269,050 h, front tire size: 315/60 22,5, rear tire size: 315/60 22,5, Equipment: ABS, air conditioning, central locking, differential lock, electronic stability program (ESP), fog lights, immobilizer system, parking heater, sliding door, spoiler, trailer coupling, truck registration, Reference number for inquiries: 66863 Volvo FH 12/460 * Year of manufacture: 2011 * ABS, Anti-lock Braking System * Trailer coupling * EBS, Electronic Braking System * ESP * Power windows * Air conditioning * Leather interior * Retarder / ZF-Intarder * Power steering * Sleeper cab * Seat heating * Auxiliary heater * Full aerodynamic kit * Immobilizer * Central locking * Differential lock * Long-haul transport > 7.5t * Digital tachograph * Radio CD * USB interface * OBU preparation (on-board unit) * Refrigerator * Electric windows & mirrors * Remote central locking * AdBlue tank * Roof spoiler * Side fairings * Fog lights * Comfort air-suspended seat * Toolbox * MP3 interface * Multifunction steering wheel * Sun visor * Air suspension * Transmission type: Automatic * Suspension: Air / Air * Gross vehicle weight: 18,000 kg * Kerb weight: 9,000 kg * Payload: 9,000 kg * Permissible total weight: 18,000 kg Dusdpfx Afeyibyye Dsn * Tyre condition, 1st axle: 50% -- 30% - Tyre size: 315/60 R22.5 * Tyre condition, 2nd axle: 60%|60% -- 30%|80% - Tyre size: 315/60 R22.5 * Wheelbase: 3,700 mm * Tyre size: 315/60 R22.5 Disclaimer: Subject to change, prior sale, and errors. More pictures and videos available on our website. Our comprehensive service includes for example: * Purchase / sale / rental of commercial vehicles * Fast, hassle-free financing * Assistance with all (export) documentation * Arrangement of export/customs registration plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TÜV approvals, registration service * Transfer service for commercial vehicles Please contact our qualified staff for advice—we are happy to assist you.

Condition: new, Year of construction: 2022, approx. 14 running meters, height: 650 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 650 cm - Depth : approx. 110 cm - Length : approx. 14 running meters - Load: 3000 kg shelf load - Galvanized uprights - Cross beams 270 x 14 x 5 cm, T30 - Crossbars in orange - New BLT / PR65 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 06 x upright approx. 650 cm x 110 cm, disassembled. - 30 x crossbar approx. 270 x 14 x 5 cm, T30. - 60 x safety pins. Djdpfx Aeyh Il Tjf Djun - Levels: Floor + 3 - 60 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2400,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, approx. 100.16 running meters, height: 450 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 450 cm - Depth : approx. 110 cm - Length : approx. 100.16 running meters - Load: 3000 kg shelf load - Galvanized uprights - Cross beams 270 x 14 x 5 cm, T30 Djdpfxsyh Ilgo Af Doun - Cross beams in orange - New BLT / PR45 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 037 x upright approx. 450 cm x 110 cm, disassembled. - 144 x crossbar approx. 270 x 14 x 5 cm, T30. - 288 x safety pins. - Levels: Floor + 2 - 324 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 10.900,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.